No depreciation areas have been defined for asset

Dear consultant,
By mistake from our user had deactivated Depreciation Area in T-code AS92 for Auc asset 1200005 please suggest
How can we activate Deprecation area ?
Because We already settled 350 line item in same asset and still 150 item we have to settle from this asset.
The problem is if I run any T-code related that asset getting error
No depreciation areas have been defined for asset 1200005-0
Message no. AA025
one more thing i want to tell you that this happend only for one asset not for entire asset class I check in IMG Setting is ok for asset class.

I tried doing this but I got an error:
Depreciation area 01, which you want to create as a new depreciation area in chart of depreciation TTHI, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
Do you have another solution for this?
I hope anybody can help me on this issue.

Similar Messages

No depreciation areas have been defined for asset 10001-2

Hi,
While creating Goods Receipt(MIGO) the following error is showing
"No depreciation areas have been defined for asset 10001-2"
Could u plz, suggest me what i have to do.
Thanks in Advance,
Sudheer.

Hi
Goto Asset Master TCode AS02 / Depreciation area tab and check depreciation areas have been defined for asset 10001-2" or not.
Cheers
Srinvias

Order type 'OR' has not been defined for sales area (IDOC related)

Hi,
iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables, the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
Thanks

Hi,
I believe this is nothing to do with the setting the IDOC value..Some config is missing...
Check to make sure if there is a record found in the view V_TVAKZ for the combination..
IF not check with your function consultant regarding this..
Thanks,
Naren

HT204088 I have been debited for £0.99: £4.48 and £8.30 from 13 - 28 March. I do not recognise these purchases UNLESS they are for APPS. Please confirm.

I have been debited for £0.99: £4.48 and £8.30 between 13 and 28 March 2014. I do not remember making any purchases on ITunes.
Can it be for APPS recently purchased? Please advise.

First, make sure that you did not inadvertently make an in-app purchase. Many apps, particularly games, are free for the base game but charge for additional features such as levels, "coins" and other such add-ons. Check your Purchase History to see if that reminds you as to what you might have purchased:
http://support.apple.com/kb/HT2727
If you find that these were in-app purchases, to prevent this from happening again, turn off "In App purchases" in the Restrictions settings on your device. For more information, see:
http://support.apple.com/kb/HT4213
As to a refund, that's not automatic since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
They're usually pretty lenient in the case of inadvertent purchases, but there are no guarantees.
If the charges are not in-app purchases that you made and forgot but the charges do appear in your Purchase History, contact the iTunes Store and let them know. You should also immediately change your password for your Apple ID. If the charges don't appear in your Purchase History, they were probably fake charges made directly to your credit card, and your card issuer will need to handle those.
Regards.

HT203167 I am trying to download songs onto my PC it gets to about 85% download then my computer crashes. When I look in my account I have been charged for the items but it has not downloaded and there are no available downloads??

I am trying to download songs onto my PC it gets to about 85% downloaded and then freezes I have to turn off and restart but then I have been charged for the item but it is not available in my downloads can anyone help?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

No Project IMG has been defined for Starting Reference IMG SOLMAN ERROR

Hi All,
I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
Thanks in advance,
Sreekala Rapuru.

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

APP-PO-14258 no rate has been defined for this date

Hi,
When we are trying to receipt an error is appearing
APP-PO-14258 no rate has been defined for this date
Cause The rate type that you have entered uses pre-defined rates. No rate has been defined for the currnet rate type and rate date combination.
Action: Enter a rate date for which a rate has been defined
Please assist me.

Are you using foriegn currency?
If yes, You have to define exchange rate for that date.

Message#30079-No valid service categories have been defined in Customizing

I am trying to execute trans. AC03 in External Services Mgmt, and I get the message: Message#30079-No valid service categories have been defined in Customizing
Yet, I believe that I have done all the configuration necessary for External Services Mgmt. Does anyone know what I need to do next?

Hi I assume that 30079 is not a message number but You are using some service category with this number but you should use the standard service categories for the same The following service categories are available in the standard system:
o   ALL      Complete service
o   GRND     Basic services
o   SERV     Services, Purchasing
Messages Numbers can not be that much long.
Lekhram

In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing. It instructs me to uninstall & reinstall...

I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

I am totally ignorant when it comes to these products. How can I put music on my shuffle without paying for it on itunes? Can't I find a song somewhere and where and then transfer it to my shuffle somehow. I have been trying for 3 hours.

I am totally ignorant when it comes to these products and devices. I have a ipod shuffle, 4th generation. I want to find music, without purchasing a song on itunes and then copy it to my shuffle. Is this possible. If so, where do I find the music and how do I get it to my shuffle. I have been trying for 3 hours and about to give up. Please help me.

Yes, of course. iTunes was around before there was an iTunes Store. And I think Apple cares MORE that you purchased an iPod, and LESS about where you get your music to play on the iPod.
You can buy music the "old school" way, on CD, and "rip" them into your iTunes library using iTunes.
You can download/buy music from other sources, as longs as the format is MP3 or AAC, and don't use copy protection (DRM). NOTE: iTunes Store music downloads do not use any DRM.
One example is Amazon.com.
http://www.amazon.com/MP3-Music-Download/b/ref=sa_menu_mp3_str1?ie=UTF8&node=163 856011
They offer a utility called Amazon MP3 Downloader, which automatically places your downloads into your iTunes library.
If the source just provides you with the downloaded song files, all you need to do is open a window showing the files or the folder containing the files. Run iTunes and select Music in the sidebar, under LIBRARY. Then drag the songs files or the folder containing the files from its window to the iTunes window, and drop them there. iTunes will add the songs to your iTunes library.
Once the songs are in your iTunes library, you can automatically sync or manually load them onto your shuffle.
http://www.apple.com/support/ipodshuffle/syncing/

I can no longer open my files that I have been using for years?

I can no longer open my documents that I have been using for years.
"Adobe Reader could not open xxxx.jpg because it is not a supported file type or ................."
Help.

Here are instructions for setting file associations for Windows 8. Again, you will need to know what program you have that opens .jpg files.
How to Associate File Types in Windows 8: 5 Steps (with Pictures)
Good luck.

I have been trying for 4 weeks to get my iPod to connect

Hi, I have been trying for the last 4 weeks to get my iPod to work with my computer. I am computer literate, i built my own computer, i make games, etc. so i know what im doing when i use my computer. That being said, here is my problem.
When i connect my iPod to the computer i hear the noise saying it is connected, and i see the Hardware icon at the bottom that shosw that it is connected. When i start iTunes it dosnt show up, i go into the options and it says no iPod connected. Then i try to go into My Computer to see if it shows up, it dosnt. So then i go into my device manager and i see that there is an iPod there, i try to reinstall but it still dosnt work. Next i tried to go into Control Pannel->Admin Tools->Computer Management. In there i click on Disk Management to see if my iPod shows up. I scroll down and there it is, Cribs Ipod. It dosnt have a drive letter, so i try to give it one but it dosnt let me. After all this i try to update the iPod but it just says that it cannot be read.
So, next i bring my iPod to my laptop and plug it in. It works, perfectly. i update the software and it works. But my music is all on my desktop so i try everything over again with the updated iPod, still dosnt work.
I have bought a USB PCI card for my computer and tried it on that, didnt work. Tried buying a new cable, didnt work. I have tried updateing every single peice of hardware on my computer and updating windows, none of it worked.
I have gone through all of the support forums and FAQ to try and fig it. I have done the 5 r's and all that. None of it worked.
I am flat out of ideas other than it being my iPod, but my iPod works with my laptop. It would be very very helpful if you could help me. I dont wanna have to go buy some other MP3 player.
Thanks in advance.

Try this here:
http://docs.info.apple.com/article.html?artnum=93499
"Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear"
And since you are teh savvy about these sort of things, here's Microsofts support article for the drive issue:
http://support.microsoft.com/default.aspx?scid=kb;en-us;297694
"New drive or mapped network drive not available in Windows Explorer"
Good luck

Hyperlinks (a href) have been outdated for a very long time

I have felt that "a href" hyprlinks have been outdated for a very long time.
so much so that they should no longer be known to most developers (like frames and html based hyperlink maps)
the only thing they can do is cause a new page to load.
The event which causes this has to be a click (on an image, string of text or other compatable html object).
and the event itself has to be the loading of a new page.
by comparason by using javascript you can use ANY html attribute (Onclick, OnMouseover, OnMouseout ect) to trigger to event
or you can use ANY event listener to trigger the event.
You could also set these to only trigger under specific circumstances. (for example an onclick event followed by a mouse over at least 3 seconds later)
and the event which occurs can be anything
it could be a simple page change
or it could bea page change with a modificaton (such as a preloader displaying to hide the fact that the new page is loading)
or it could be a page change, or an animation, or anything else you can think of determined by an IF statemen
furthermore by using AJAX or JQUERY you can have an event which alters a database or SQL file or, in simple cases plain text file based on the users actions - and then determines the action it performs based on the content of the database or SQL file or text file
This coveres everything from very simple actions
to very complex dynamic actions which have an infininte range of possibilites
so
why are is a href still used?

I don't think any serious web developer can afford to make sweeping assumptions like this. Anchor tags are stable and 100% reliable on all platforms & web devices. It might surprise you to know that many people disable client-side scripts for security reasons. How will these people interact with your site?
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Nancy O.

No depreciation areas have been defined for asset

Similar Messages

Maybe you are looking for