No desktop visible after recent kdemod/xorg upgrade
Hello,
After the recent upgrade (which included kdemod packages for 4.3.3 and the new xorg 1.7.1.1) , i no longer have visible desktop(s) - by which i mean i can't see any desktop icons or wallpaper (see below). If i look in system settings or in the right-click menu of the desktop pager widget; i see that i have four desktops configured, but i can't get to the desktop properties since there's nothing to right click on... am a bit stumped.
Regards,
/t
I upgraded 2 PCs and have suffered similar problems.
PC
Unable to see PCI Wireless Card
Does not start NETWORK daemon
LAPTOP
Broadcom Wireless Card does not work using NDISWRAPPER
NETWORK daemon starts, but with errors
I think the problem here is either with wpa_supplicant or NDISWRAPPER
I am not sure exactly why these problems have come up following the recent upgrade. I need to find out how to roll-back to the old settings!!!!
Similar Messages
-
[SOLVED] Plasma Desktop segfaults after recent KDE update to ver. 4.6
Today after upgrading some amount of packages, including the new KDE 4.6, my Plasma Desktop "segfaults" every single time I login into my account. I tried to send some information regarding this issue using KDE's internal reporting system, but unfortunately it tells me, that those information are irrelevant. Does anyone experience "segfaulting" of the Plasma Desktop after recent KDE upgrade? I'm looking for some help on how to solve this issue, as for the moment my Arch is dead...
Last edited by Zibi1981 (2011-01-28 18:47:24)panosk wrote:
Actually, it is KDE that is giving you trouble, not the OS . When you reach the kdm login screen, don't login. Instead, switch to a tty (Ctrl+Alt+F1, for example) and login from there. Then, you can see a list with all your plasmoids with
plasmapkg -l
If you find the culprit plasmoid, and it is a plasmoid downloaded outside Arch's repos (from kde-look.org, for example), remove it with
plasmapkg -r plasmoid_name
If the plasmoid is installed as a package, it is probably better to uninstall/upgrade it using pacman.
panosk wrote:do you use some extra plasmoid? if so, you need to rebuild them.
Hi all,
I have the same problem. I tried using tty, but I got "cannot access to X server". Than I tried
Alt+F2 to run Terminal, I used
plasmapkg -l
in order to see the list of all the plasmoids, but I couldn't find the "culprit" plasmoid. I don't know if I am doing it right. Here the list of my plasmapkg:
[encho@x~]$ plasmapkg -l
plasmapkg(1986)/libplasma Plasma::PackageStructurePrivate::createPackageMetadata: No metadata file in the package, expected it at: "/home/encho//metadata.desktop"
BbalL
KMLDonkey
MolmassCalculator
activitybar
akonotes_list
akonotes_note
albums
amarok_containment_vertical
barapplet
battery
binaryclock
blackboard
bookmarks
bubblemon
calculator
calendar
charselect
clock
comic
concentrationCalculator
currentappcontrol
currenttrack
desktop
desktop
desktopDashboard
desktopDashboard
dict
digital-clock
eyes
fifteenPuzzle
fileWatcher
folderview
folderview
frame
fuzzy-clock
gasCalculator
icon
incomingmsg
info
internal:extender
kalgebraplasmoid
katesession
kdeobservatory
keyboard_applet
kgetpiechart
kimpanel
knowledgebase
kolourpicker
konqprofiles
konsoleprofiles
ktorrent
labels
lancelot_launcher
lancelot_part
launcher
leavenote
life
lockout
luna
lyrics
magnifique
mediaplayer
netpanel
netpanel
news
newspaper
newspaper
notifications
notifier
nowplaying
nuclearCalculator
opendesktop
opendesktop_activities
org.kde.griddesktop
org.kde.groupingdesktop
org.kde.groupingpanel
org.kde.showActivityManager
pager
panel
panel
panelspacer_internal
paste
pastebin
photos
plasma_applet_didyouknow_kalzium
plasma_applet_notes
plasma_applet_parley
plasma_applet_rtm
plasmaboard
previewer
qalculate
quicklaunch
rssnow
sal
sal
saverdesktop
saverdesktop
searchbox
showdashboard
showdesktop
similarArtists
simplelauncher
sm_cpu
sm_hdd
sm_hwinfo
sm_net
sm_ram
sm_temperature
spellcheck
system-monitor_applet
systemloadviewer
systemtray
tabs
tasks
timer
trash
twitter
unitconverter
upcomingEvents
videoclip
weather
weatherstation
webbrowser
webslice
wikipedia
windowlist
worldclock -
Curve 8330 will not sync with desktop manager after 4.5 OS upgrade
Last time I connected to the desktop manager, it asked me to upgrade to 4.5. I thought, why not? So I did. Since then, I can no longer use the Google Sync for calendar and contacts as it stopped working immedately afterwards.
I realized I need to get my contacts updated on my phone, and my calendar corrected so I tried to sync to the desktop.
The phone is no longer being recognized by the system. This is since the updated. I have downloaded the USB / Modem drivers again but haven't installed / reinstalled them yet.
I was hoping it was maybe a simple fix?
I'm running Win XP Professional SP 3. I am using 4.7 of the Desktop manager. (Worked fine before OS upgrade)
If I haven't given enough details to help, please let me know.
Thanks!natattack06 yes it should also help you as well.... basically any 5xx error
gallhiser you should still try repairing yours, might be able to sell it and make back some money -
After kernel and xorg upgrade, xorg crashes at login
I've upgraded several packages and have some trouble with Xorg since then. Those are the upgraded packages:
[2009-12-26 18:08] upgraded libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:08] upgraded libgl (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded ati-dri (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded git (1.6.5.7-1 -> 1.6.6-1)
[2009-12-26 18:09] upgraded gnome-bluetooth (2.28.3-1 -> 2.28.6-1)
[2009-12-26 18:09] upgraded gnome-user-share (2.28.1-1 -> 2.28.2-1)
[2009-12-26 18:09] upgraded hdparm (9.27-1 -> 9.27-2)
[2009-12-26 18:09] upgraded kernel26-firmware (2.6.32.2-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded kernel26 (2.6.30.6-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded lib32-libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:10] upgraded lib32-libgl (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded lib32-mesa (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded libgnome (2.28.0-1 -> 2.28.0-2)
[2009-12-26 18:10] upgraded libxcb (1.4-1 -> 1.5-1)
[2009-12-26 18:10] upgraded mesa (7.6-2 -> 7.7-1)
[2009-12-26 18:10] upgraded pm-utils (1.2.6.1-2 -> 1.2.6.1-3)
[2009-12-26 18:10] upgraded pycups (1.9.46-2 -> 1.9.47-1)
[2009-12-26 18:10] upgraded ruby-gnome2 (0.19.3-1 -> 0.19.3-2)
[2009-12-26 18:10] upgraded run-parts (3.2.1-1 -> 3.2.2-1)
[2009-12-26 18:10] upgraded system-config-printer-common (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:10] upgraded system-config-printer-gnome (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:11] upgraded totem (2.28.4-1 -> 2.28.5-1)
[2009-12-26 18:11] upgraded udev (146-2 -> 149-1)
[2009-12-26 18:11] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.2-1)
[2009-12-26 18:11] upgraded xf86-input-keyboard (1.3.2-2 -> 1.4.0-1)
[2009-12-26 18:11] upgraded xf86-input-mouse (1.4.0-2 -> 1.5.0-1)
[2009-12-26 18:11] upgraded xf86-video-ati (6.12.2-2 -> 6.12.4-3)
[2009-12-26 18:11] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-12-26 18:11] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-12-26 18:11] upgraded xorg-server (1.6.3.901-1 -> 1.7.3.902-1)
[2009-12-26 18:11] upgraded zlib (1.2.3.3-3 -> 1.2.3.4-1)
[2009-12-26 18:14] upgraded flvstreamer (1.8k-1 -> 1.9-1)
[2009-12-29 12:59] upgraded lib32-libgcrypt (1.4.4-2 -> 1.4.5-1)
[2009-12-29 12:59] upgraded lib32-libgl (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded lib32-mesa (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded libass (0.9.7-1 -> 0.9.8-1)
[2009-12-29 12:59] upgraded lucene (2.9.0-1 -> 3.0.0-1)
[2009-12-29 12:59] upgraded subversion (1.6.6-2 -> 1.6.6-3)
[2009-12-29 12:59] upgraded tzdata (2009s-1 -> 2009t-1)
[2009-12-29 12:59] upgraded zlib (1.2.3.4-1 -> 1.2.3.4-3)
I have tried to disable KMS, and tried further to disable Compiz, to no avail. Every time I log into Xorg, I either get a black screen with nothing showing (I can move the cursor, though), or sometimes I can see the wallpaper. When I do see the wallpaper, however, Xorg eventually freezes. When I do not see the wallpaper, nothing happens.
Anyway, if you need any more information, tell me, I'll tell it.@rocking turtle
I just uninstalled xf86-input-mouse and xf86-input-keyboard. I had already configured my input devices to work with xf86-input-evdev.
The login process went a little further than usual (gnome-panel loaded) but then Xorg crashed and I was forced back to GDM.
@ewaller
I'm posting my rc.conf, /var/log/Xorg.0.log and the interesting stuff you wanted from everyting.log:
The intereting stuff in everything.log seems to point at libdrm, and my stupid ATI card.
Dec 30 10:07:36 cipher kernel: [drm] Initialized drm 1.1.0 20060810
Dec 30 10:07:36 cipher kernel: [drm] radeon defaulting to userspace modesetting.
Dec 30 10:07:36 cipher kernel: pci 0000:01:00.0: setting latency timer to 64
Dec 30 10:07:36 cipher kernel: [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
Dec 30 10:07:36 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:07:36 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:07:36 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:07:36 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:07:36 cipher kernel: [drm] Num pipes: 1
Dec 30 10:07:36 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:07:45 cipher gdm-simple-greeter[4794]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:07:46 cipher gdm-simple-greeter[4794]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:08:01 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:08:54 cipher kernel: CE: hpet increasing min_delta_ns to 15000 nsec
Dec 30 10:09:51 cipher kernel: CE: hpet increasing min_delta_ns to 22500 nsec
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: completed -> group handshake
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: group handshake -> completed
Dec 30 10:13:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:13:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:13:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:13:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:13:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'wally.desktop': Unable to start application: Failed to execute child process "wally" (No such file or directory)
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'awn.desktop': Unable to start application: Failed to execute child process "awn-autostart" (No such file or directory)
Dec 30 10:14:13 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:14:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:51 cipher kernel: compiz[5424]: segfault at 4 ip 00007fdda45f93b0 sp 00007fff520a1358 error 4 in libxcb-glx.so.0.0.0[7fdda45f0000+12000]
Dec 30 10:14:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:14:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:14:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:14:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:14:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:14:54 cipher gdm-simple-greeter[5630]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:15:02 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Here's my /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64
Current Operating System: Linux cipher 2.6.32-ARCH #1 SMP PREEMPT Sat Dec 26 09:02:58 CET 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/cc39eaa7-c39d-4f29-916d-cf0cb8c14611 ro vga=792 boot=quiet
Build Date: 26 December 2009 02:34:45PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 30 10:14:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c09c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 9
(--) PCI:*(0:1:0:0) 1002:7145:1028:2003 ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) RADEON(0): TOTO SAYS 00000000efdf0000
(II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1028 SubsystemID: 0x2003
IOBaseAddress: 0xee00
Filename: BR18652D.bin
BIOS Bootup Message:
M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 432000
(II) RADEON(0): Default Memory Clock: 396000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0xf
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x7e30
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1978000
(II) RADEON(0): Will use depth buffer at offset 0x1fb8000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 92160 kb for textures at offset 0x25f8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x0507f900
(II) RADEON(0): [pci] ring handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring mapped at 0x7fe92fe69000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2b800000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fe93c4a0000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1b800000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fe92fc69000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1b801000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7fe92dfe9000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 68900000
best_freq: 68900000
best_feedback_div: 689
best_ref_div: 18
best_post_div: 15
(II) RADEON(0): crtc(0) Clock: mode 68900, PLL 68900
(II) RADEON(0): crtc(0) PLL : refdiv 18, fbdiv 0x2B1(689), pdiv 15
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event7"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event6"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
And my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Toronto"
KEYMAP="cf"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!pcspkr !snd_pcsp !bcm43xx !ndiswrapper loop b43 fuse)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="cipher"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@openntpd @stdb @httpd @mysqld @cups @samba syslog-ng network netfs @crond alsa dbus hal fam networkmanager !gdm)
Oh and hell, if you want to have a look on my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "ServerFlags"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "drm"
Load "freetype"
Load "synaptics"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
# Option "XkbLayout" "ca"
# Option "XkbVariant" "fr"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "CPT"
ModelName "140b"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any bit of help is appreciated. -
[SOLVED] Synapse not working after recents other packages upgrades
Hi !
After having upgraded a lot of packages, I figured out that Synapse is no longer working. It gives me the following output when trying to start it from shell :
[16:46:43.878282 Info] Starting up...
[16:46:43.944439 Info] [UILauncher] Binding activation to <Control><Alt>space
[16:46:43.944501 GtkHotkey-Debug] Listener Type: GtkHotkeyX11Listener
Preparing to bind <Control><Alt>space
Got accel 32, 12
Got keycode 65
Got modmask 12
[16:46:43.957062 Info] [GuiViewVirgilio] Screen is composited.
[16:46:43.957242 Info] [GuiViewVirgilio] Using cedilla input method.
[16:46:44.080733 Warning] desktop-file-service.vala:95: Pantheon is not understood
[16:46:44.092847 GLib-Critical] g_path_get_basename: assertion 'file_name != NULL' failed
Erreur de segmentation (core dumped)
Here's the package I've updated and caused this bug to appear...
[2013-10-09 14:03] [PACMAN] upgraded glib2 (2.36.4-1 -> 2.38.0-1)
Thanks for your help,
SilverWyrda.
Last edited by SilverWyrda (2013-10-09 20:09:55)Thank you for your replies. I can confirm that removing gnome-weather app "solves" the issue even with the very latest updates. It seems in fact to be the line DBusActivatable=true in the .desktop entry that causes this bug as it is explained on http://web.archiveorange.com/archive/v/ … YqAEh0yuaA.
Mystery solved ! -
[SOLVED] Desktop Weird After KDE 4.9 Upgrade
I really wish I could have come up with a more descriptive title for this post, but I don't really know what to call what's going on. I don't even know how to explain it, so I'll let a screenshot do the talking.
This is what my desktop looks like after the upgrade.
Last edited by jlacroix (2012-08-08 01:49:16)ElderSnake wrote:
I wish I had a helpful answer for you. Did you delete the .kde4 folder after the upgrade? Of course then you would lose your customizations but it's a common thing after a major upgrade in KDE I think.
Honestly I never deleted anything though and the upgrade seems to have gone really smoothly, and I have quite a few customizations (which is why I risked trying it without deleting the config folders)
That used to be the case where you needed to delete the .kde4 folder when upgrading, but the last four major releases didn't require that for me. I'd rather not delete that folder if I don' t have to.
The problem is on my desktop. My laptop was smooth. I used the same image for both, but the only real difference is that my desktop uses dual monitors. Maybe 4.9 doesn't like that anymore? -
Desktop visible after resume (from suspend) and before screen is locke
My desktop becomes visible for brief period (<1s) when the system resumes from suspended state. My desktop env. is XFCE4, it happens with both xscreensaver and gnome-screensaver (also with slimlock and i3lock), therefore I think it's not locker dependent. It's a major security flaw because sensitive information may be exposed (not just porn). Using both XFCE provided locking facilities (suspend/resume lock options in Power Manager and Session settings), and systemd suspend/resume hooks yields same result. I remember back then when I was using Gnome, I haven't had this issues. Does anyone have any idea how to prevent this desktop expose?
Have you tried this --> https://wiki.archlinux.org/index.php/Pm … or_suspend ?
-
I've never had a problem with Firefox before (although I've had trouble with flash player). When I was notified a few days ago that the upgrade to 3.6.11 was available I downloaded it, or thought I did. Now I recall seeing a message several times of an unknown software error, but I didn't copy down the error number, didn't know what software had the problem, and ignored it because I wasn't having any problem that I was aware of. Then I received a message to upgrade to 3.6.11 again, and when I did, it stopped the upgrade at 95% and said "The update could not be installed (patch apply failed). You can update Firefox manually by visiting this link and downloading the latest version: http.www.firefox.com". This works to 95% and then gets a message saying "access denied". I dread the thought of uninstalling and reinstalling Firefox. If so, will everything be lost?
You have user agent that is corrupted by Fast Browser Search and that identifies you as Firefox/3.5.6 FBSMTWB
*Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.1.6) Gecko/20091201 Firefox/3.5.6 FBSMTWB
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
* http://help.fastbrowsersearch.com/ -
After recently upgrading to Maverick my desktop computer and all other devices will not recieve emails from my IMAP account, it keeps asking me for a password which has never been changed in 8yrs, please help as it was my business account from so long ago and I use it for general 'stuff' and my 'me' account for personal
CheersSince it is affecting all your devices also, try going to the e-mail web site and seeing if you can log in there. Who is the e-mail provider?
Try deleting the pass word from Applications/Utilities/Keychain Access.
If that doesn't work, try deleting and adding back the e-mail account. -
2 problems left 2 fix after xorg upgrade
hi,
im sure everyone is sick of the questions on here after the xorg upgrade, but I have 2 more I can't find answers to;
1/. when i try to use Eterm, it is always on top of every other application, but is never in focus! to use it, i am having to type commands into mousepad, then paste them with the mouse wheel into Eterm. I dont use any decoration on Eterm either, so with it not ever being in focus, keyboard shortcuts dont close it, so to close it, i have to write 'ps -ax' into mousepad, copy & paste with the wheel back into Eterm, find the PID, then type 'kill <PID>' into mousepad, then again copy & paste with the wheel back into Eterm!
2/. when X starts up, i have openbox, xcompmgr, stalonetray and tint2 autostart through my ~/.xinitrc, however, stalonetray is not visible and there are no shadows around either untill i have dragged another application over where they should be!
just so you know, i have disabled hotplugging in my xorg untill i have time to set it up properly!
http://wiki.archlinux.org/index.php/Xor … otplugging
thanks
Last edited by ninjaprawn (2008-12-09 20:29:39)ok, i have been trying to fix my Eterm first. Firstly i run Eterm with -x argument, which is jus ment to open it with no decoration, however, after this update, it seems to now run Eterm with no decoration, unfocused, and always on top!
if I run Eterm without the -x argument, its fine! I think openbox can do apps without decoration or borders, so i will have a play with that!
with regards to xcompmgr, and not starting up quite right, i will play with xcompmgr & xorg.conf and post back any success / failure i have! -
X server won't start after recent catalyst-test and kernel upgrade
Hi,
after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
[ 114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 116.077] (WW) Falling back to old probe method for fglrx
[ 116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 116.101] (EE) fglrx(0): DAL initialization failed!
[ 116.101] (EE) fglrx(0): Display Infrastructure Failed
[ 116.101] (EE) fglrx(0): PreInit failed
[ 116.212] (EE) Screen(s) found, but none have a usable configuration.
[ 116.212]
Fatal server error:
[ 116.212] no screens found
[ 116.212] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 116.212] (EE)
[ 116.515] Server terminated with error (1). Closing log file.
My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
I've tried:
- to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
- to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
- to use open-source drivers (poor performance, overheating)
- to check nomodeset option (present at all kernel images in generated grub.cfg)
Unfortunately, I could not find any similar issue solved in past few days...Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
Edit: catalyst-test 13.2 beta works with linux 3.7.4.
Last edited by sirkubador (2013-02-05 14:24:44) -
Time Machine Backups after recent upgrade to Mountain Lion
Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
Thanks for the help.
- JasonI received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
I hope this helps. -
After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.
May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them. -
Xserver crashes intermittently after a recent (yesterday?) upgrade
I am running arch stable on thinkpad x61s, with
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Since yesterday or, so my Xserver crashes every half an hour or so, usually when I do something with keyboard. I guess that this means that there is some problem with the keyboard driver, or with the graphics driver (as whenever I do something with keyboard, stuff is drawn/redrawn usually).
I believe I have started sufferring from this problem a day or two ago, after a series of upgrades to xorg related packages. Can anybody give me some hints how to debug it ? Are there any log files I should check first? This makes my machine essentially unusable.
Last edited by wazow (2009-05-01 20:03:55)I am using the intel driver:
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
thanks a lot - then I know what is the reason, and will keep an eye on this. Perhaps I should revert. Today no crash has happened, though. Let me see how this develops. At least I am not giving any presentations in this laptop within a week or so. -
After BI 7.0 Upgrade, Roles and profiles are not visible
Hi Gurus,
We have issue with the roles and profiles, all our users doesnt see any roles or profiles in Bex Analyzer, under there user access after BI 7.0 Upgrade.
When I go and check there profile in SU01 and I can see all roles are assigned but not able to see in the Bex Analyzer reporting tool.
Do we need to do any configuration settings after BI 7.0 upgrade to visible roles. This problem with every user.
Your help will be really appreciated.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 22, 2009 5:19 PMHi Mohan/Vijay,
Sorry for little bit late. I have all authorization roles access, and users dont have that access. Difference between our roles is I have SAP_ALL and SAP_NEW.
But when they login with old bex analyzer they can see all roles, but not with new bex analyzer.
Please some suggest me still I need to run SU25.
Thanks
Dayaker Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 10:19 AM
Maybe you are looking for
-
Acrobat 9 or Designer 8.2 Which of the two is best program to design a form in.
I have some questions that I would like explained to me (by you long time users) I have acrobat 9 and designder 8.2.1 1. Which of the two is best program to design a form in. 2. What is the differance between the two in designing a form.(advantages /
-
Downloading trial of acrobat 9 pro
Does anyone know if the Adobe site will be working this year. I want to order the 9 pro but want to try it first, to no avail have I been able to get into the download area. They have been under construction. The Live folks don't know much. Any ideas
-
JBO-25036 when executing executeQuery of a view Object
I have a view object that performs a given query. when I call executeQuery the first time, it works perfectly. But on the second call I get the following error: JBO-25036: An invalid object operation was invoked on type View Object with name SxIdioma
-
HT1689 I bought an app and I got charged twice? Can I get the balance back?
I lost almost 10$ from my account. Actually it's for my daughter.
-
Service Pack for iTunes problems?
Does anyone know more about the $49 service pack Apple supposedly has for fixing iTunes 5+ install problems? Is it specific to iTunes, or is it an overall service pack for all known software issues? I am quite confused now by all of the fixes floatin