No destination for Integration Server found

Hi,
I've created a java Proxy, and when I want to test it I get the exception
com.sap.aii.proxy.framework.core.BaseProxyException: No destination for Integration Server found
Has anyone had a similar problem, and do how were you able to solve it?
I have included the XI jars in my project, I have the following entries in dbconnect.properties
hostname=<myXIhost>.<domain>
systemnumber=00
client=100
user=<xiappluser>
password=<xipassword>
language=EN
in technicalID.properties I have the following entries
SAPTechnicalSystemIdentification=<technicalSystem>.<namespace>.SystemHome.<servername where the proxy is running on>.<domain>

Similar Messages

No destination for Integration Server found - XI 2.0

Hello,
I have developed a few java proxies and have had good luck using the jpf.properties file. Now, as we would like to set up more of a production scenario we are in need of moving over to the dbconnect.properties and technicalID.properties. The problem is when switching over to these files I received the "No destination for Integration Server found" error. So first off I would like to make sure we have the files configured correctly.
dbconnect.properties
hostname=xipsys
systemNumber=03
user=xiusr
password=xipswd
client=300
language=EN
... the dbconnect.properties file is correct I believe.
technicalID.properties
SAPTechnicalSystemIdentification=TS_MyTechnicalSystemName.SystemHome.MyPCName
... the TS_MyTechnicalSystemName is the technical system that I created in the SLD. MyPCName is my computer name as this is where I'm running the java proxies from.
First off, does it look like my files are configured properly?
Second, in the SLD I've configured my technical system and also a business system with similar names and specified the host as MyPCName. Is this correct?
I've also noticed that when I remove the files completely from my system I get the exact same error message however they are in the right location and have the correct names. Is there anyway to get a better error message out of the system? I know the files are in the right location cause if I use the jpf.properties in that location it works.
thx
XI 2.0

Well it's getting a lot closer. I'm getting a different error now and its showing up in tx SXMB_MONI. The error I get is...
ROUTING.NO_SENDER:Unable to find a sender
In the monitor it shows that there was a message pushed but it's red flagged and there is no sender/receiver information. Is there anything else I need to add to the java proxies?
The following is my latest configuration ....
dbconnect.properties looks like
hostname=myXIServer
systemNumber=03
user=XILDUSER
password=password
client=300
language=EN
technicalID.properties
SAPTechnicalSystemIdentification=TS_myTechSys.SystemHome.BS_myBizSys
In the SLD I have TS_myTechSys defined as a "SAP Standalone Java System" on myComputer.mydomain.com.
Also in the SLD, I have defined BS_myBizSys as a "Java System" and belongs to the TS_myTechSys Technical System.
In the exChange Profile under ApplicationSystem I have the following defined
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
com.sap.aii.proxy.framework.connection.timeoutInMSec
com.sap.aii.proxy.framework.destination
com.sap.aii.proxy.framework.destination.client
In addition I also get the following error sometimes...
JPF loadProfileProperties() - Could not access Exchange Profile: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer '
com.sap.mw.jco.rfc.MiddlewareRFC'
no sapjcorfc in java.library.path
I have this file as a dll in the same directory as all the jar's.
in addition XILDUSER is part of the following group
SAP_BC_AI_LANDSCAPE_DB_RFC
Should that user have more permission?
Any ideas?
XI 2.0
One more note, I am running my WebApp from an instance of Tomcat 4.1. This is where the Java Proxies are running and it works fine using the jpf.properties. Some of the documentation I've recently found has said that it needs to be running on a SAP J2EE engine which we will not be able to do in the end.
Message was edited by: Larry Chaput
Message was edited by: Larry Chaput

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

Technical system for integration server

hi all
what are the steps involved in creating a technical system for integration server?what is the role of RZ70 in creating technical system for integration server?
regards
bhasker.

Hi
Technical systems should be registered by calling transaction RZ70 in technical system. Activate the profile & excute the job.
Make sure that you have provided correct SLD Host name & Gateway (Either central or local on XI).
Once you execute this function a default background job will be scheduled which will run after every 12 Hrs.
Cheers
Rakesh

RH7- WebHelp Pro setting destination for RH Server 8

I'm trying to set the RH Server 8 "area" in the Destination window using RH7 and WebHelp Pro layout but there's not field available. Because of this, the default is always the "general" area, which means I cannot separate out my 4-5 projects for reporting purposes using the Access database.
FYI - The same is true for FlasHelp Pro layout using RH7 and RH8 (which I'm testing). However, in RH8, you can specify the area if you're using WebHelp Pro as primary layout.
Since I'm not allowed to switch to RH8 at this time because of internal procedures, I want to publish my projects using WebHelp Pro layout in RH7. Is there any way to plug the server area into the project without having to redo the set up every time?

My guess is that John is facilitating a class as he hasn't yet made an appearance. So maybe near lunchtime but more likely this evening unless he is traveling.
Just speculating on this but as Colum indicated, areas are new to 8 so I'd be shocked to see them being listed as an option in a patched up 7.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

SXMB_ADM for setting Integration server configuration

Hi,
Default client 001 is set as integration server. Can anyone suggest whether it is recommened to use this 001 as integration server or we can use a new client say 200 as integration server.
Thanks and Regards,
Sailesh K

Hi Sailesh,
This Please recommend: Which client to use for Integration Server. (001???) would address your question.
cheers ,
Prashanth
P.S Please mark helpful answers

Wrong Integration Server Data retrivied from Adapter

For unclear reasons the wrong URL to connect to Integration Server was retrieved by Adapter Framework.
This happened only once, and in this situation the xml message of a productive interface were sent to IS of an
other system (!).
As I can see in the default trace, during the call from AF
CPA cache service to SLD, the wrong host was retrieved.
In other circumstances, we have found that sometimes the IS hostname is filled with blank, causing the AF to not dispatch successfully the messages to IS. But in this case, thanks to the patch 14 of XI AF, the message are re-sent after the next polling sequence (15 min.).
I kindly need an help to discover which is the root cause of this kind of problem.
I red note 764176 about finding inconsistencies on sld, but I have some doubts on the correct implementation in my case. In the note it's discussed about the same domain written two times (for example one in fully-qualified host name and one with a short host name). In our productive SLD there are three domain that have the same name for the technical system point of view, but three definition as CIM data, since there are originally three XI instance on the same host. So, I don't know if we are in the same condition as reported in the note.
Does anyone have encountered a similar situation? Any workaround? For example, I view in the default traces that during the SLD Access performed by CPA service, there is no defualt value for Integration Server URL, but for default client yes (100). Is there a mode to force adapter framework to set the IS Url without asking it to sld, since I.S. url is always the same?
Thanks
Danilo

Hi,
The connection to the SLD is established by creating an RFC destination and The server program is called with the HTTP address as a parameter that is maintained with transaction SLDAPICUST.
Hope this link will be useful.
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/8512417301ee6fe10000000a1550b0/frameset.htm
and 25th page of config guide.
https://websmp101.sap-ag.de/nw04installation
Regards,
Madhu

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Integration Server configuration error

Hi all,
I have an issue with the XI Integration server configuration.
When I have tested the configuration I have detected that there is an error in the Integration server (transaction SXMB_ADM)
The value was:
http://xxx:xxxx:/sap_xi/engine?type=entry
instead of
http://xxx:xxxx/sap_xi/engine?type=entry
note that the fisrt value have : after the port number.
I have tested the SLD Bussines System configuration and had the same issue, I have solved too.
But when I execute the test for integration server in transaction SXMB_ADM i have the next message:
Corresponding Integration Server: Current Configuration <> System Landscape
For the SLD Role of Bussines System the value in this test is the old value, not the new.
Could somebody tell me if i forget something?
Thanks in advance,
RP

HI,
This is somthing related to Cache . Try to refresh Cache.
see below links regarding cache
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
Regards
Chilla

System Landscape : Corresponding Integration server not maintained

Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
Teja

Hi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Two integration server on the same sld group

hii,
If I configure two xi integration server to one sld in the same group?
Is it recommended?
Will it cause a collision between the two systems?
tanks in advanced
Royi

Hi,
This can be done as follows,
1. Create multiple Business System Soruce Gropus. When creating the group for the source, you need to give the related integration server . In your case create the Source Busss System Group A and Group B for intregration server A and B.
2. Create Business System Target Group Group C for integration server C which is the target integration server.
3. Assign the source business systems to the correspiodning groups by providing the correct related integration server.
4. Do the same for the target Business Systems as well.
5. Now, go to each of the Source Business System and then select the Transport Targets option and map it to the corresponding business system on the target side. This should be done for all Source Business System of Group A and Group B . They should all point to the correct Business System of Group C.
6. When importing objects you would need to make sure that the Business Systems Being used in the Configuation Scenario all belong to the same Source Business System ., ie. a confgiuration scenario should be such that all business systems used in it belong to either Group A or Group B and not to both.
Regards
Bhavesh

SLDCHECK fails for XI server - SLD on separate system

Dear All,
I have SLD configured on my solution manager system. All systems including XI are updating data in SLD -> Technical Systems.
My problem
When I execute SXMB_IFR, SLD web page opens up fine. But in transaction log is see following:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Also, when I try to execute Runtime Workbench, is throws following errors:
5 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access - Attempt to create JCo connection object failed for domain domain.00.zonexid - Integration Server unable to specify a JCo client - No component names available from Integration Server -
I have checked authorizations for all users, PIRWBUSER, PIAPPLUSER (used in SLDAPICUST) etc, but couldn't solve it.
Post installation, I changed client setting for integration server after client copy and followed "Wizard-based basic configuration" for PI steps.
Can anyone pls point out where I'm failing.
regards, Sean.

Hi,
Can you check this way.
in SMSY_SETUP --> Edit --> Expert Setting
Write Data Back into SLD
SLD Host <hostname>
Namespace in SLD sld/active
SLD Server Port 5??00
Passwort SLD <password>
SLD User XIAPPLUSER
And then schedule the data update again.
If you cannot find the Password SLD field follow the OSS note 757204 report YKSLDPW.
Report YKSLDPW.
TABLES SMSY_OPTIONS.
SMSY_OPTIONS-SYS_OPTION = 'SLD_PW'.
SMSY_OPTIONS-VALUE = 'Ihr SLD_PW'.
SMSY_OPTIONS-VISIBLE = 'X'.
SMSY_OPTIONS-EDITABLE = 'X'.
Modify SMSY_OPTIONS.
Report YKSLDPW helped us to set up an automatic data capture.
Regards,
Srini Nookala

RM Error: No ports that send to the Integration Server could be found

Hi,
In the Runtime Monitor, End-to-End Monitoring Configuration, Logon to XI, Display-->
It is showing the following error:
No ports that send to the Integration Server could be found for the following ALE logical systems:
ZSEND765: Unable to log on to system IDS in language en with user PIRWBUSER
Plz help in solving this.
Regards,
Balaji

Hi,
please check if user PIRWBUSER is locked and if he has enough rights:
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
Regards
Patrick

No destination for Integration Server found

Similar Messages

Maybe you are looking for