No destination to install time machine backup
I recently bought a new internal hard drive, as my old one died on me.
I've installed the hard drive and have started the system. It all seems to be working fine, except when I go to Restore from TIme Machine Backup, there is no destination for me to install my back up on to.
Help??
I am using an external hard drive for my time machine backup
Similar Messages
-
How do i install time machine backup from old mac to newer one
Hi, I know how to set up a brand new imac with full info and settings from an old mac from a time machine backup on a portable drive, BUT.... this time i have a 2011 imac in my studio already in use that we want to be completly swapped with full info and settings/software etc from an older 2009 imac, which we may sell on.
I have backup up via time machine the older 2009 mac, but when i plug this into the 2011 imac how do i completly wipe it and set up with info from the time machine?? it was easy doing it on a factoryt new mac but not this.
thanks
leeIf I have understood you properly, you want to migrate the data from the 2009 iMac onto the 2011 iMac but keeping the existing files on it.
To do this, use Migration Assistant > http://support.apple.com/kb/HT4889 It will create a new user with the transferred files from the old iMac.
If you want to wipe the 2011 iMac and restore everything from the 2009 iMac, the most reliable way is erasing the hard drive, reinstalling OS X and restoring the backup. If you are using the same OS X version on both iMacs, you can restore the Time Machine backup without having to reinstall OS X, just starting from the Mac OS X DVD (or Recovery HD, if you have OS X Lion or Mountain Lion) -
Installing Time Machine backup to a newer iMac
My old Intel iMac has died and I am getting a newer iMac. Both Macs have Lion installed and I want to install backups from Time Machine to the newer iMac. Is this a straight forward operation or will it cause me some grief?
My old iMac was a late 2006 iMac 2.16ghz and the newer one will be an early 2008 iMac 3.06ghz.
Any information will be greatly appreciated.It would appear I am on the wrong Forum for assistance with my problem. Will try elsewhere. Cheers.
-
I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.
It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to. -
No destination disk to install time machine back up on to
My hard drive recently died, so I've bought a new one.
I'm trying to install my time machine backup from my external hard drive on to my MacBook Pro.
Everything works fine, except when I get to the "Select a Destination" stage, there is no disk to choose from!
Help??Perhaps, if your computer is new enough to be able to use OS X Internet Recovery. Boot OS X Internet Recovery by holding ⌘, option, and r (three fingers) while you start your Mac.
At the Mac OS X Utilities screen, select Disk Utility.
If you do not see the Mac OS X Utilities screen, your Mac is too old to have used OS X Internet Recovery and you will need its original System Install disc. Obtain a replacement directly from Apple. -
Hi, I am new or know nothing about Mac Mini which I received from relative as gift along with few software including lion OS.
I want to install lion after time machine backup of current files Mac OS X 10.6.8.
MY question is that backup of Mac OS X 10.6.8 can be installed or copied on newly installed Lion software.
Thanks in anticipation.
RajOnly third-party applications and the user's admin folder. Since Lion succeeds Snow Leopard, you cannot restore the system software without first erasing the drive. That means you must have the Snow Leopard installer DVD.
I would simply upgrade the Snow Leopard system with Lion:
How to Install Mavericks, Lion/Mountain Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to
the Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before
installing the update unless you will boot from this drive and install the
update on it. Reconnect it and turn it back on after installation is
complete and you've restarted.
2. You may experience unexpected results if you have installed third-
party system software modifications, or if you have modified the
operating system through other means. (This does not apply to
normal application software installation.)
3. The installation process should not be interrupted. If a power outage or
other interruption occurs during installation, use the standalone
installer (see below) from Apple Downloads to update. While the
installation is in progress do not use the computer.
D. To upgrade to Lion/Mountain Lion, Mavericks:
1. Purchase the Lion/Mountain Lion Installer from the Mac App Store.
The download should start quickly. Lion is nearly 4 GBs so a fast
internet connection is essential. Download time could run upwards of 4
hours depending upon network conditions and server demands at the
time. Note that Mavericks is FREE.
2. The installer will run automatically after the download is completed.
Click on the Install button to begin the upgrade.
3. Follow instructions for installation.
Also see:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
It seems I am not alone in the failure of installing Mountain Lion. I am using a mid 2010 MacBook Pro, had Lion installed, tried upgrading to Mountain Lion. Like so many others I am getting errors, can't repair disk, etc. I do have Time Machine backups, and can go select the most recent one, but when I get to the screen to select a destination, there is nothing to select.
What are my options for restoring to my last good backup? My Lion OS was also from the app store. I believe I had either Leopard or Snow Leopard when I first bought my MBP, but not 100% sure. I am just extremely frustrated and while I know I have been doing backups to the Time Capsule, if I can't get one of those to restore, will I be able to get to the files it backed up if I have to completely erase and start over with a lower OS?At some point I was finally able to get the recovery from the Disk Utility menu, once I threw in an older OSX DVD (Snow Leopard.) Once I could get to my files, I copied just the folders/files I wanted from my HD to an external drive, then went back in through Disk Utility, erased everything and when I went to reload, it did an online recovery and actually grabbed my copy of Mountain Lion and installed it without a hitch. I figured it was going to reload the older OS but apparently since I had already purchased Mountain Lion, the online recovery retrieved that from the cloud?? Anyway, once that installed and I added back on what I wanted, it's like I have a new MacBook. No other issues once I installed. I did have to get an update for one of my programs, Final Draft, but so far everything else is running. Seems the erase and clean install was the best way to go. Thanks!
-
I want to do a clean install of Mountain Lion. Can I do this without a DVD version of the OS, and can I restore only specific things like iPhoto and iTunes libraries from Time Machine backup.
Mountain Lion is only available as a download, so there is no DVD to purchase. What you can do is download ML and then stop it from installing as soon as it's on your drive. From there you can make your own bootable ML flash drive.
When your purchase and download Mountain Lion, it will end up in the Applications folder and automatically want to install. Press Command+Q to stop the install and exit. The installer will remain on the hard drive.
1) Right click on the installer and choose "Show Package Contents".
2) A folder will open on the desktop. Drill down to Contents > SharedSupport and double click the disk image InstallESD.dmg to mount it on the desktop.
3) From here you can either burn a DVD, or copy the contents to a flash drive. Personally, I would strongly suggest using an 8 GB flash drive formatted as Mac OS Extended. You will be able to boot to it in about 30 seconds instead of at least 10 minutes off of a DVD, and it will install MUCH faster. Make sure the flash drive is empty, or you've copied anything off it it you need as it will need to be erased.
4) Don't just drag and drop the contents you see in the open disk image to the flash drive. It won't boot that way as it will be missing some hidden files. Open Disk Utility. You will something similar to this:
5) To accomplish the above, highlight either the flash drive's single partition (as I did), or the item at the bottom (Mac OS X Install ESD), which is what you will see with the Lion disk image mounted. It doesn't matter which one you pick. You'll then have the option to select the Restore tab towards the upper right. Drag and drop from the left column into the Source and Destination fields as shown above. If you've already erased the flash drive, you can uncheck the box. Click the Restore button.
You've just made your own bootable Mountain Lion USB Flash drive installer. Once you boot to the flash drive, run Disk Utility first to erase the drive you want Mountain Lion on, then continue with the install.
As far as restoring your iPhone and iTunes libraries, I couldn't tell you. So I wouldn't do any of the above until someone else chimes in with a way to do that after a clean install of ML. -
2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).
I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!
-
I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own." -
I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?
zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details. -
Howdy.
Ok, wanted to update my daughter's MacBookPro (late 2009 - 2.26ghz - 8GB RAM) I took a new external and partitioned into two GUID partitions. Installed Lion on one, and did a full (and verified) backup on the other. Booted off the external, erased the laptop drive and installed Lion. Works perfectly.
But when I try and access the Time Machine backup, I can't even see the partition. The icon is on the Desktop, the partition is in Finder. When I first instaled it even asked if I wanted to use that partition for Time Machine. But I can't do anything but a full restore, which I obviously do not want.
I tried going into Time Machine itself and when asked if I wanted to "Use Previous Disk" to do TM backups, I said yes. But I could not get the Mac to "inherit" the old backup.
Migration Assistant doesn't see the partition either.
Help?First I formatted 2 partitions GUID on the external and installed Lion into one of them., and backed up the Macbook (via Time Machine) into the other. I then booted off the external Lion partition, erased the Macbook, installed a fresh Lion.
I then restarted using the new internal Macbook drive. Works perfectly. But now, when I try to use Migration Assistant I cant see the second partition, the one with the Time Machine backup.
I know I can do it manually but actually the computer is with my daughter at college in Arizona and I'm in Connecticut, so I'd rather get to the screen that allows you to restore users and settings only.
Thanks! -
When trying to chose a disk on which to install mavericks I get a message that says "this disk is used for Time Machine backups" and cannot be used. Help!
I don't know what will help at this point. You should never update a system that has problems, unless you're absolutely sure that the problems are caused by a bug that is fixed in the update. With your backups in an uncertain state, you should not update or do anything else except start a new backup.
-
I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.
The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
I don't understand how you managed to get your Time Machine backup to not backup the system.
Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
Allan -
I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.
Maybe you are looking for
-
J2SE XML to Flat File Content Conversion
Hi I've currently got a scenario which sends a flat file to the integration server, it gets mapped and sent to a receiver adapter on a deployed j2se engine. I'm now trying to convert the xi-xml structured file to a flat file again on the j2se side (t
-
Suggestion on pocket drive and migration of iTunes to Pocket Drive
My computer is quickly getting filled up with all my music. I orginally used the default settings and had iTunes put all my music in My Documents-->My Music. Since I am running out of space on this computer, I am thinking of getting a pocket drive an
-
Joining within a collection/Selecting a large set of values
Hello everyone, I'm testing DocumentDB for a new project, and at the moment I'm not sure if and how I can realize my use case. Lets say I have the following in my collection: About 500000 employee records: { "Id": "1", "Type": "Employee", "Name": "t
-
Hi Experts..... I have implemented a screen exit in ME21N Transaction to add custom fields. With this I could get an extra custom tab in which I have included my fields. Now my req is to get multiple tabs as the fields are more in number. So I wanted
-
Error when trying to execute process chain !!
guys, i am getting following error .. " Inconsistency in delta administration" where sud i look and what sud i do ? also, when i try to check the process chain, its showing error, and followinig is the descreption.. "@5D@ A type "Generate Index"