No Detail Pages!

I have just built a new sight consisting of photographs using Photo Pages. I do get Detail Pages (enlarged photos) when I click on the thumbnails I have set up in the program, but I get NO DETAIL PAGES on the website after publishing. The hyperlinks I set up don't flash the color formats I set up either. Any help out there?

A Graphic was covering the thumbnails. Moved it to back.
Hyperlinks working better but still erratic.

Similar Messages

Timeout problem - record is not shown properly in detail page after timeout

Hi,
I am using JDeveloper 10.1.3.1.0.3984
and JHeadstart 10.1.3.1 Release 10.1.3.1.26
I have a Master View Object where there is a field ID (for example M_VO).
There is a page associated with M_VO (Page_M_VO.jspx)
There is a Detail View Object (for example D_VO)
There is a page associated with D_VO (Page_D_VO.jspx)
There is a link from M_VO to D_VO using the field ID.
When I open the page Page_M_VO.jspx and select an ID and go to the detail page Page_D_VO.jspx, it goes to the detail page Page_D_VO.jspx. It works fine.
But the problem is:
If for example I have three ID (111, 222, 333), in master page if I select 222 and go to detail page it shows the appropriate records for 222 as I selected 222 in master page. If I keep the detail page open for more than the timeout minutes specified in web.xml and then try to access the detail page again it ask for userid and password (which is fine). If I put userid and password, then it shows the detail page with the first record which is the record associated with the ID 111. But before timeout I was working with the ID 222, so it should show the record associated with ID 222 as I was working with ID 222 before timeout.
Can anybody help me to solve this problem?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

I would put my money on the fact that since your application is timing out, it is dropping any state that your View Objects otherwise had before the application timeout.
So upon reauthorizing and reaccessing the application (and going directly to the detail page) the View Object is reinstantiated and only knows to go to its default data set which is 111.
If my assumption is correct, I don't think you could really implement this without a lot of trouble.

Can I link from Interactive report Page 1 to Master Detail page 2?

Hi folks-
I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
Do I create the Interactive Report, and customize the 2nd page, to add a region?
Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
Can someone please give me a nudge as to the sequence I should be doing?
(As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
Thank you
Marion

Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
Perhaps I can explain in better.
I want one page as an interactive tabular report (of the master records)
I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
I'm soo close to what i'm trying to do!
Thank you for your continued patience and assistance
Marion
here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
SELECT
"PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
"ENTITIES"."ENTITY_ID" "ENTITY_ID",
"ENTITIES"."FIRSTNAME" "FIRSTNAME",
"ENTITIES"."LASTNAME" "LASTNAME",
"ENTITIES"."COMPANY" "COMPANY",
"PHONENUMBERS"."PHONE_ID" "PHONE_ID",
"PHONENUMBERS"."PHONETYPE" "PHONETYPE",
"PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
"PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
FROM
"PHONENUMBERS",
"ENTITIES"
WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
Edited by: mtpaper on Oct 12, 2009 1:30 PM
Edited by: mtpaper on Oct 12, 2009 1:32 PM

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Project Server 2010 Webpart for Project Detail Pages

Hello,
I do have a requirement where I need to develop a Project Server Web Part to show some calculated project information based on some business rule from Reporting database.
That webpart I have to add in Project Detail Pages to show calculated project information for the Project I have selected/clicked from Project Center.
So please tell me how can I link my webpart with ProjUID in URL like "PWA/Project%20Detail%20Pages/ProposalStageStatus.aspx?ProjUid=2b24d36b-7796-4789-ada3-d895d218fc14"
So that it shows data corresponding to opened project in Project Server.
Thanks and let me know in case have any doubts in understanding the requirement.

Hi YLee_1980,
If I understand your requirement correctly then you can use ProjUID querystring paramater to get specific ProjectUID like below
HttpContext.Current.Request.QueryString["ProjUid"];
Then after getting ProjectUID you can use it anywhere in your SQL query, PSI method calling etc etc.
Also you can look into PS 2010 Solution Starter
custom solutions Kit to enhance your knowledge on PS 2010 development. That would a great starting point.
Thanks much hope this will help
Sachin Vashishth MCTS

ADF BC - One Master and Two Detail pages How To?

I have an existing ADF BC .jspx master-detail page that works fine. It shows one product as the master (read-only; no navigation controls) and assocatied customer feedback as the detail (multiple records; read-only.) Now I also want to compute some averages from the same table used to create the detail view object. I have created a second view object because this requires a separate query that calculates aggregate values. I want to take advantage of using view links so that this 2nd view object is automatically linked to the master record via the primary key.
My question is how can I link this into the existing master-detail data control so that I can drag/drop it to include id on the existing .jspx page and the primary key linkages will be handled automatically?
Tables
Product
Feedback
View Objects
ProductView
FeedbackView
FeedbackAVGView
Current ViewLink
ProductFeedbackViewLink = ProductView + FeedbackView
Current DataControl
ProductFeedbackViewLink-Instance
Data Control is displayed on .jspx page; want to also include 3rd View Object, FeedbackAVGView, in the Master-Detail relationship and display on the .jspx page

Thanks for the reply. The existing customer feedback view object displays the customer's text feedback (testimonials) - these will be displayed in a read-only table with multiple records.
The new view object aggregates the ratings score from the customer feedback (same FEEDBACK database table) and will use a form to display the results (not multiple rows.) The PK is included in the aggregate view object query.
Note there is already an existing viewlink between the PK (Master) and FK (Feedback) - in the data control, this viewlink is an instance of the Master View Object and the Customer Feedback View object. Now that I have created a third view object, should I create another View Link between the Master View Object and the Customer Feedback AVERAGES View Object? If I do this, how do I include it in the existing .jspx page? If I add this new View Link to the Application Module I will have two different Data Controls:
Data Control #1: Master (Product) View Object + Customer Feedback View Object #1 (implemented as a master-detail read-only form/table on a .jspx page)
Data Control #2: Master (Product) View Object + Customer Feedback AVG View Object #2
I'm confused as to how to integrate the second customer feedback view object into the existing Data Control / Master-Detail read-only form/table on my .jspx page?
thanks

Question on "Master Detail page using ADF" sample

I downloaded the "Master Detail page using ADF" sample application. I modified editDepartment.jsp page to include the Commit button as follows:
<html:submit property="event_Commit">Save and Commit</html:submit>
When I go to edit a department record and click on the new "Save and Commit" button, I SQLed the DEPARTMENTS table and noticed that the edits were not commited. I also restarted the embedded OC4J server and still get the same results. For some reason, the department view object contains the modification but the entity object doesn't. Why?

Scott,
My colleague suggested a workaround, which is to explicitly include the detail table's id in the master table's partialTargets list. So, for example, in MasterDetailDP.uix, changing:
<table model="${bindings.DepartmentsView1}"
       id="DepartmentsView111"
       partialRenderMode="multiple"
       partialTargets="_uixState">to:
<table model="${bindings.DepartmentsView1}"
       id="DepartmentsView111"
       partialRenderMode="multiple"
       partialTargets="_uixState EmployeesView312">...will cause the detail table to be updated when sorting the master table.
There is some question about whether sorting a table should actually cause the currently selected row to change - we're still discussing this point.
Andy

OAF matester detail page : How to have a "Show All" feature on screen, so that all the master and details records are expanded .

Hi ,
I was trying to have a "SHOW ALL" feature on the master - detail page,
the detail table is an advancec table.
Please help me with inputs on how to have "SHOW ALL" feature,
Currently, we have to click on ":Show" for each record at master level to view the child data.
Trying to achive "Show All" Feature so that on click of this the master records on the page 'Expands" showiing all master records with respective detail records.
Regards
bhuvanm

Hi,
You should not set DetailFlag = "Y" in whereclause because there is no such record.
Also detail flag is transient attribute and not the query column, hence the error "Invalid indentifier".
I asked you to use DetailFlag as query column with static value "Y".
for example:
SELECT "Y" detail_flag
FROM <table_name>
This will display all the table records in expanded format. if you want it conditionally then use decode on some bind parameters.
For example:
SELECT DECODE(:1, "SHOWALL", "Y", "N") detail_flag
FROM <table_name>
This bind parameter should be passed whenever you want to execute query for the table.
Regards,
Sandeep M.

Graph not loaded on navigating to another detail page

Folder Structure :
webcontent
index.html
    view
      -lineDetails.controller.js
      -lineDetails.view.js
      -lineStatus.controller.js
      -lineStatus.view.js
      -MainApp.view.js
      -MainApp.controller.js
      -MasterPage.controller.js
      -MasterPage.view.js
I've a splitapp consisting of a masterpage - MasterPage and two detail page - lineStatus & lineDetails.
there is a table in lineStatus page and a line graph in lineDetails page,
when one clicks on show graph in table user is navigated to lineDetails page.
The problem is that graph in lineDetails page is not visible, though <div> for graph is created.
If I load lineDetails page first(where the graph is), then everything works fine and graph is visible.
Code :
Adding a column to table.
var oColumn4 = new sap.ui.table.Column({
         label: new sap.ui.commons.Label({text: ""}),
         template: new sap.ui.commons.Link({text:"show graph",press:function(){
          splitapp.toDetail("lineDetails");
         width: "25%"
Adding a graph to the page and returning it.
createContent : function(oController) {
oModelLineDetail = new sap.ui.model.json.JSONModel({
businessData1 : [
{Time :"1:00",Level:10},
{Time :"2:00",Level:10.5},
{Time :"3:00",Level:9.5},
{Time :"4:00",Level:4},
{Time :"5:00",Level:9.6},
{Time :"6:00",Level:10.1}
oDatasetLine = new sap.viz.ui5.data.FlattenedDataset({
    // a Bar Chart requires exactly one dimension (x-axis)
    dimensions : [
    axis : 1, // must be one for the x-axis, 2 for y-axis
    name : 'Time',
    value : "{Time}"
    // it can show multiple measures, each results in a new set of bars in a new color
    measures : [
       // measure 1
    name : 'Oil level', // 'name' is used as label in the Legend
    value : '{Level}' // 'value' defines the binding for the displayed value
    // 'data' is used to bind the whole data collection that is to be displayed in the chart
    data : {
    path : "/businessData1"
oLineChart = new sap.viz.ui5.Line({
    width : "80%",
    height : "300px",
    plotArea : {
    'colorPalette' : d3.scale.category20().range()
    xAxis : {
                isIndependentMode : false,
                title : new sap.viz.ui5.types.Axis_title({text: 'Time', visible: true})
    yAxis : {
                isIndependentMode : false,
                title : new sap.viz.ui5.types.Axis_title({visible: true})
oTextView = new sap.ui.commons.TextView({
text: "Line Speed",
tooltip:"Line Speed",
//width: "100%",
design: sap.ui.commons.TextViewDesign.H1
}).addStyleClass("lineDetHeader");
oLineChart.setModel(oModelLineDetail);
oLineChart.setDataset(oDatasetLine);
var btn = new sap.ui.commons.Button({text:"button",press:function(){location.reload();}});
lineDetPage = new sap.m.Page({
title: "Line varaible details",
showNavButton:true,
navButtonPress : function(){splitapp.toDetail("lineStatus");},
content: [oTextView,oLineChart,btn]
return lineDetPage;

Hi,
Use the following code for navigation from one iview to another:
WDPortalNavigation.navigateAbsolute(
"ROLES:portal_content/com.cv.kaar.Test_Page2",
WDPortalNavigationMode.SHOW_INPLACE,
(String) null,
(String) null,
WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
(String) null,
(String) null,
"Name=" + wdContext.currentContextElement().getName());
You have other options too like, External Window etc. other than the SHOW_INPLACE.
The last line of the above coding is used for passing parameter to another iView.
Give the right path of the iview PCD path, omitting pcd:
Hope this helps.
Regards,
Srinivasan T
<b>Helpful answers=>points</b>

Not able to see a narative report from a contact detail page.

In the URL of the weblink, I set up the link to the report as follow:
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq&P2=Contact."Contact ID"&P3%%%Id%%%
but when I right click on the weblink on the contact detail page I get this:
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq%0d%0a&P2=Contact.%22Contact+ID%22&P3ADBA-3AYF6O
I get %22&P3ADBA-3AYF6O at the end of the URL when I should get %%%Id%%%.
What could have happened? How can I fix this?
Thanks in advance for your help!

Actually thats correct. When you specify %%%Id%%%, it gets replaced with actual row id which is "ADBA-3AYF6O" in your case.
One mistakeI noticed, '=' is missing after P3 it should be
https://secure-ausomxdca.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_31844_Shared_Folder/WEB+APPLET/FAX+to+contact&Action=Navigate&P0=1&P1=eq&P2=Contact."Contact ID"&P3=%%%Id%%%
Try it.
Dinesh

Is there a way to remove default lightbox related stuff from poplets in product detail page?

http://pilotpenaustralia.com.au/product-catalogue/writing-instruments/frixion-range/frixio n-ball-erasable-pen/
On above page (which is a product detail page using product large layout) I added poplets and it started to generate javascript conflicts and my dropdown stoped working. I am using mootools and jQuery in my site and if I just take out the tag for poplets out, every thing start working perfect. I also tried to take every thing out except scripts we are using for dropdown but all in vain.
I am looking for some solution like if I can have plain markup including images for popup without the default lightbox code. My plan is to add lightbox or colorbox manually so it will not have any confilict with other scripts.
I am trying to find the solution for last two days but no solution worked at all. Your help will be appericiated. Thanks a lot in advace.

Thanks for your kind reply. Yes I can see number of errors. Actually my client purchased this theme and it uses some how mootools and jQuery at same time. I was only to look into product layouts. I don't know what other scripts are doing there. I know this is a mess but I am sure there should be some way to resolve it in my current scope of work. I switched all other scripts specifically the ones uses jQuery and also did not link jQuery too. But still lightbox.js (the one BC embeds) is conflicting with mootools and menu. So what the deal??? Waiting for positive feedback.

Can I set up a Master-Detail Page with report regions for 2 Detail Tables?

Hi there,
I am just starting to use Application Express.
I have a Table (A) with Master-Detail relationships to two Tables B & C.
I can set up a Master-Detail Page between Table A and Table B, where the records displayed in Table B change when switching between records in Table A. I would like to add Table C to the page and for this to work in the same way.
Is this possible in APEX? (I've tried adding a report region for Table C and making the Region Source dependent on the same ID field as is used by the report region for Table B but I keep getting "No Data Found" for Table C).
Many thanks.

Thanks, but the text needs to be on a single master page which every page is assigned to. This is so the text alternates correctly regardless of whether new pages are inserted or moved. If I assigned separate master pages to individual pages and then moved the pages to a different location, the alternating footer text would then fall out of sync. I hope that made sense!

Master & Detail Pages

Hello all,
I am asking for help on creating Master - Detail pages. I am using Wamp version 2. Database name "TestingCo" with 3 tables:
Users:      user_id                int(4)           Primary_Key
               user_fname          varchar(30)
               user_lname          varchar(30)
               user_license_id    int(4)
               user_pix_id          int(4)
Licenses: license_id           int(4)             Primary_Key
               license_no          varchar(10)
Pictures: pix_id                 int(4)             Primary_Key
               pix_url                varchar(50)
1. I create a recordset called: rsMasterDetail:
     * with all fields from all 3 tables.
     * Where users.user_pix_id = pictures.pix_id AND users.user_license_id = licenses.license_id
     * Order By users.urser_fname
2. On Master page, I insert Master Detail Page Set:
     * Master page fields: All fields from rsMasterDetail recordset.
     * Link to Detail from: user_id          / later I tried: user_fname
     * Pass unique key:   user_id          / later I tried: one by one from each field of Users table.
     * Show: All records
     * Detail page name:     Detailpage.php
     * Detail page fields:     All from rsMasterDetail recordset.
3. Result: (I always get the same result as below).
     * Masterpage.php - perfect - All correct display between 3 relational tables
     (*) Detailpage.php - when I click on any link from the Masterpage.php:
          - All the fields from Users table are displayed correctly depending on which link I clicked on Masterpage.php
          (+) The fields from table Licenses are displayed the first row only (1st record of the table.)???????????????
          (+) The fields from tabel Pictures are displayed the first row only???????????????
A. When I built the rsMasterDetail recordset, I test it and the result is good.
B. The masterpage.php shows all fields in perfect order.
There must be something wrong when the information passes from Master page to Detail page!??!!???
Please help me!
Thank you

Hi Lon,
When I test it, the tables relationship is perfect since all three tables line up correctly on the masterpage.php. If there is problem with tables relationship, I should also have such problem with the masterpage.php.
I, once tried to build another recordset called: rsTest. This time I had only 2 tables: Users and Licenses. The result was the same; only the first row of the licenses table would show on the detailpage.php; while the masterpage.php the rows on both tables line up correctly.
I have tried many ways to find solutions unsuccessfully. What I get so far is:
* The recordset is display correctly every single time when I click the "Test" button, as well as on the masterpage.php (I meant the tables relationship).
* When the link on the masterpage.php is clicked, the detailpage.php supposes come up and display all rows of 3 tables of the linked record. However, all rows of the 1st table are correctly displayed, and the other table(s) only show its first row regardless which link on the Masterpage.php was clicked.
I hope you and others gurus can help me out.
I appreciate your help.

Is it possible to disable the 'edit layout' link on the record detail page

Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.

Dear friends,
Please help me with this scenario.Thanks so much for your help.
Task: ADDING A NEW ITEM IN THE CREDIT REQUEST DETAILS PAGE.
Need to create a new item on this page called "approver notes" (column notes).
Can this be achieved by personalization?
Scenario:
On credit request details page disputed invoice number, request date, status, bill to, ship to, etc are displayed.
When the status is "not approved”, item should be displayed along the "rejected" comment.
If the status is other than "not approved" then the item should not be displayed.

what page is this ? are you sure it is a OAF page ?
If it is a OAF page, you would need to extend the controller to fire a partial action for the item and then control the display property of the comments field
Tapash

Data input in table format on a Project Detail Page

Hello,
Does anyone know of a way to input data for a Project Detail Page (e.g. Project Detail Page) in PWA 2013 using an Excel like view (table view)?
Also, is it possible to edit more than one project at a time in this view?
Thank you
Michael

Hi Michael,
If you're using Project Server 2013, you have some 3rd party apps (free or not free) which propose an Excel-like spreadsheet to bulk edit project custom fields, such as
Nearbaseline or
FluentPro.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

No Detail Pages!

Similar Messages

Maybe you are looking for