"No device activated..." error

I have been using iSync (2.4) on my PowerBook (10.4.11) with my Nokia E71x for about a year with no problems. I add or up update contacts in my Address Book (4.0.6) then use iSync to update them in my E71x. But now all I get is the "No device activated..." error and nothing happens. I tried removing my phone and re-adding it....still won't work now. Anyone know why?
Also, anyone know what "never" means below where it says "Mokia E71x"??
http://home.earthlink.net/~jeffny001/NokiaE71x.jpg
Any help appreciated...
Jeff

Can you tell me what "No device activated" means in iSync speak?
It basically means iSync cannot detect the phone in order to communicate with it.
You say you've deleted the pairing and started again from scratch...
During the Bluetooth Setup process you should get a screen similar to this:
!http://s3.amazonaws.com/ember/UT2VVoR9kfj9MszEF3XoBzYEkzmGtfOt_o.gif!
Make sure that ALL the checkboxes you get are checked. Including the "Access the internet" one (even if you don't plan to, as iSync communicates via modem commands).
After that, iSync should automatically open, and add the icon for your phone. What does it do for you?

Similar Messages

Error message on reading device saying error dialog user not activated

error message on reading device saying error dialog user not activated. unable to open book to read

I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

Need help with BES 10 activation error: "Device activation can't be completed because the setup process or a training tutorial is running"

Hi All,
I am having a hard time finding any info on this activation error, and I really can't get to the bottom of it. When I enter my companie's activation code for the BES 10 network, it gives me the following message:
" Device activation can't be completed because the setup process or a training tutorial is running on your device. Try again later."
It would be nice if the msg could be a little more specific! But anyway, I have tried all the traditional fixes, battery pulls, re&re to BES, etc. but still nothing. My last option is to wipe and see if that works but curious to see if anyone has run into this before.
PS I have a Z10 STL100-3
Thanks in advance!
cheers

Good. excellent solved service blackberry
Thanks. aspataro
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

My Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

How do I open a library book on a recently acquired Samsung Nook? I get "too many activations" error. I have an active adobe digital editions and my other devices work fine. Custumer Support was unable to get the new device activated.

I have a library book on the bookshelf of a newly acquired Samsung Nook but I cannot open it. My other devices work fine but I cannot activate the new unit. I get a "too many activations" error message. Customer Services say I have a valid license but they deemed my problem to be a technical issue and referred me to the forum. Thanks

Step 1 - by trial and error...
So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes. This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure. I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device. Then I copy files from the user's private directories to the public drive space. When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS. Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes. So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes.
I have three huge boxes full of vynl records I've accumulated. The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work. In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

Error message about too many devices activated.

Need to reset devices for Adobe reader. Error message about too many devices activated.

Reader has no such limitation. It's either Acrobat or Digital Editions.

When resettinging an iphone 5 I got this message "Activation error: this device is not registeres as a part of the iphone developer program. if you are a member of the iphone developer program please register your device" and it wont connect to iTunes

How can I get the phone to connect to iTunes to restore a backup or somehow remove and reinstall the software?

Have your phone connected to itunes. Hold the power button and then the home button for about ten seconds keep holding them both until the apple logo reappears and then hold the home button after that itunes should tell you that your restoring it then follow all the procedures....The activation error happended to me aswell and I'm a registered developer and I don't know whats going on.

My iPod says it needs to be activated and then says Activation Error, also won't connect to iTunes. Help?

My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday

You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

My ipod touch 5th gen is stuck on activation error, how do i fix it?

My ipod touch 5th generation is stuck on activation error and I got this for Christmas so I don't know what the ipod developer program is! please help

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Help please - cannot restore due to Activation Error message??

I have my husband's iPad and he has recently passed away. His iPad and iPhone say the following message" Activation Error: This device is not registered as part of the iPad developer Program...I've tried to restore them but they won't allow me. Help??
I don't want to lose any of his photos, am pretty sure he backed up before he passed away.
I can't use any of the devices because they are disabled.
I've tried setting them into Recovery Mode but it keeps stopping halfway through and telling me that the iPad cannot be restored.

Error 1604:
This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and re-open iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

HT4061 I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

Hi, jsgladden.
Here is an article I would recommend when experiencing issues activating a device. The step referring to recovery mode usually resolves the issue.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
To retrieve your data, you will need to restore from backup after processing these steps. Here is the article that walks you through restoring from either your iCloud or iTunes backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Jason H.

IPhone 5 Activation Error

Hi
My wife's iphone 5 shows an activation error that this device is not registered as a part of the iPhone developer program please register at developer program portal. Interesingly she is not developer but my son got a password from a friend (who is a developer) to download iOS7 beta version (how cool) which he downloaded on his phone and moms phone but forgot to download latest iOS7 version on my wife's phone. Any solution.
Thanks

You are getting the error because you have a beta version of iOS 7 that expired yesterday. We've had hundreds of posts about this over the past 18 hours. If you are a developer, and thus have a legitimate copy of iOS 7 beta, go to the Developer's forum, where there are detailed instructions on how to resolve this. Or have your son's developer friend do it.
It's likely that you have an illegal pirated copy of iOS 7, unless you were actively helping the developer test software; you are on your own, because we are not permitted to support stolen software in this Apple-hosted forum. There are solutions, but you will have to find them elsewhere. Start with "DFU mode"

How can I get my phone off the activation error screen?

My phone is stuck in the activation error screen and I can't get it to go away. Any solutions?

1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version 11.1.5 of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

How do i resolve an activation error in mini ipad

how do i resolve an activation error in mini ipad?

If you were on iOS7 beta, then it looks like the beta version has expired on you. You have to upgrade to the latest release version to get it working again.
Go here: https://developer.apple.com/devcenter/ios/index.action
Once there, download the latest version for your device and install the update the iPad. iTunes will not do this automatically, but if you do the following steps (after downloading) you should be good.
Plug iPad into your computer where you downloaded the latest release (7.0.2 at time of this post)
Open iTunes and click on the button in the upper right of the app for your iPad
Hold option (mac) or shift (windows) and click on Check for Updates. This will bring up a browse dialog.
Find the .ipsw file named something like this: iPad2,5_7.0.2_11A501_Restore.ipsw
Follow prompts to update and activate your iPad.
You should be back to normal at that point.
Apple will expire developer versions to make sure people are not using old versions for testing or development.
Hope this helps!

HT201407 I upgraded my iphone3gs to OS 6.1 and then after it says that activation error try again later? how to resolve it?

how can i activate my phone again always sayaing the error thing???

There are four primary causes of the activation error:
The activation server is unavailable. Rare, but it happens. Usually fixed within minutes.
Your antivirus or firewall (or your router's firewall) is blocking access to the domain gs.apple.com on ports 80 and 443.
Your phone is jailbroken.
Your phone isn't jailbroken, but the computer you are connected to during the restore or update was used to hack or jailbreak some other iOS device, and its network database was corrupted in the process.
Perhaps this will provide you some clues as to how to proceed. If your iPhone has been jailbroken, you're on your own. We can provide no assistance for jailbroken devices in these forums.
Regards.
(part of the above information quoted with gratitude from Lawrence Finch)

"No device activated..." error

Similar Messages

Maybe you are looking for