No Device Name and Port in UserTracking Report for Ipphones

Hello,
I'm having problems with Usertracking to IpPhones. The report provides information of usertracking IPPhone number, CCM Address, MAC, etc.. But the information in "Device Name" and "Port" (which would be connected) do not appear.
The CCM normally appear in Topology Services, and reports Usertracking EndHosts to operate normally, even in the same switches that the phones are connected.
Thanks

What version of Campus Manager are you running ?
What version of the Call Manager do you have ?
What kind of IP Phone is this ?
Post screenshot of the problem re-run data collection and UT . Ensure that you don't have any filters in place and all subnets are included.
Do an snmpwalk from the CiscoWorks LMS server to the Cisco Call Manager and see if you can poll those values from the cli and let us know the results using the "ccmPhoneTable" ?
Get the ut.log and ani.log with neccesary debugs enabled for phones.

Similar Messages

How to get server name and port of OSB server in a proxy service ?

I need to get the server name and port of the OSB server inside a proxy service. How can I get this?

You may use java callout for this purpose -
How to get ServerName and ApplicationName in OSB (ALSB) ?
Regards,
Anuj

Application server name and port number

Hi
Is it possible to get the application server name(ip) and port number at runtime. Becuase i want to open an html file which is in the application server, when a button is pressed by using web.show_document ();
Can anyone guide me please.
Thanks in advance
geethu

application server name and port number

Replacing Host Name and Port number throughout Environments

So I am currently working on a project that have several classes using simple JDBC code. I'm switching all of it to use JNDI instead of what is currently being used. I'm using Weblogic and the plan is to have the code run in a cluster.
Here is a code Snippet of some of the code.
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://hostname:port");
My problem lies in the the "t3://hostname:port" String. I don't want to hardcode that since I know its bad code practice but my question is what is the best way to replace that with the Host Name and Port number as I move environments. Should I have a Class with a Static Variable and just reference that through the other classes or should I put it in some Property file and read the value from there? Any insight into this would be greatly appreciated.
Thank you.

would it be something like this?
Properties properties = new Properties();
          try {
     properties.load(new FileInputStream("src/jndi.properties"));
     String url = properties.getProperty("url");
     System.out.println(url );
     } catch (IOException e) {
     }

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

How to get report Server Name and Environment ID in Report

How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
I'm also using Oracle Application Server 10G.

Hi,
Server and envid are the parameters passed along with Reports URL call.
These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
Once trapped, can be printed on Report.
Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
Thanks

How do I find the report server name, and then run paper report from forms?

How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.

Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank

Getting host name and port number from application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Getting host name and port number from an application

Does anyone know how I would be able to get the host name
and port number from an application launched by java webstart ?
This is the host and port of the URL that this application is launched from.

A couple of suggestions:
-The note is about 6.40. Doesn't fit for your server
-Don't!
-Reinstall!
Regards,
Benny

Host/server name and port

Hi,
is there like session/repository variable that holds the server/host name and port? i would like to get these values programmatically.
thanks.

In my humble opinion do not see any use in setting up these details on variables. The fact that these could be used only after logging on, which will obviously need these details manually. If you require it for tracking purpose, You could do it manually, as they are going to be static at least for that session.

How to get Server Name and port. Urgent.....

Hi,
Please let me know how can i get the server name and port without using request object.
I am getting it :- request.getServerName();
But, pl. let me know how can I get it without using this request object.
Waiting for reply..

I don't know of any way to trivially access that, but why do you need to do this? If you need access to that information in a method that can't see your HttpServletRequest, then perhaps your architecture has a flaw, and you'll be better off in the long run restructuring it.

Unable to enter Agent name and port details while doing ODI (11.1.1.6) installation on Solaris

Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.

just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand

Configuring server name and port number through action links - obiee11g

Is it possible to configure host name and port when using action links ?
Say some session variables hold these values. Is there any way to use these values ?
Thanks
SM

Any pointers ?

IPhoto won't recognize my iPhone 3Gs. just says there's an apple iPhone, instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on?

iPhoto won't recognize my iPhone 3Gs. just says there's an "apple iPhone" instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on? as far as I can tell I have everything up to date and it's always worked in the past.

Have you already confirmed your Mac as a trusted device? Try this:
Lauch iTunes.
Connect the Phone/iPad
When it asks you to trust it, say yes.
Now try again to import.

SMICM and WAS host name and port

Hi all,
Can someone please throw some light on the activity WAS host name and port in port... the question is:
Q. The information about host name and port is available in Tx SMICM, looking there in my case I find port 80xx whereas the portal runs on port 500xx. What value should we enter in the port field of "Connecting to a WAS system" in portal?
Is it what is given in SMICM or we should use 500xx?
Regards.

(80xx assuming you're starting Web Dynpro ABAP apps, integrated ITS and BSPs.)
Thanks Michael,
How about in case when it's not ABAP it's java apps i.e. when we are connecting BI to portal with SSO on dual stake. BI uses the 500xx port on FQDN and thus it's confusing me, whether to use 80xx or 500xx (when 500xx seems the port in use on BI portal).
Hope I made my point clear.
Regards.

No Device Name and Port in UserTracking Report for Ipphones

Similar Messages

Maybe you are looking for