No devices in DMZ drop down and PORT forward does ...

Hi,
We have just purchased B.T broadband with the new home hub, we have set up our hub/router the same as our old one with the correct ports forwarded for exchange to work and remote web space, it all works internally accessing the address but nothing works externally, emails don't get through etc..
Any ideas?
Also why does my device not appear in the DMZ drop down?
Much appreciated any help, thanks a lot

The home hub firewall will offer no protection to a device in the DMZ, as all incoming ports will be forwarded to the device.
All you will be left with is the normal NAT function, which is needed to provide a range of local IP adresses.
If you look at my security page, you will see there is a website you can use to find open ports.
You may find it better to use a router which supports local loopback.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

I have an IPOD Touch 3rd Gen. The volume while playing music will drop down and then right back up on some songs, all intemittenly. What causes this?

I have an iPod Touch 3rd Gen. There is a problem with the volume dropping down and then right back up, intermittenly on various songs. If you rewind past that spot, it will not do it again. It is not always the same songs. What can I do to correct this issue? I have tried a hard reboot on the iPod and the problem is still there.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.

CSS Drop down menu; how to align the right edge of drop down and parent menu?

Hello everyone,
I have a drop-down menu that is currently working well.
The only change I need to make is to have the right edge of the drop-down menu to align with the right edge of the parent menu. When you hover over the menu, it currently "drops" down and to the right, with the left edges aligned.
I want the menu to "drop" down and to the left, so the right edges are aligned.
I have tried fiddling with floats and absolute/relative positioning. I'm not sure what needs to be changed.
Any help you can provide is greatly appreciated! I'm learning via "cut and paste", so please go easy on any terminology you may use.
Thank you!
Here is my code:
.chromestyle{
     width: 100%;
     font-weight: bold;
     float: left;
     height: 29px;
.chromestyle:after{ /*Add margin between menu and rest of content in Firefox*/
content: ".";
display: block;
height: 0;
clear: both;
visibility: hidden;
.chromestyle ul{
border: 0px solid #BBB;
width: 100%;
background: url(chromebg.gif) center center repeat-x; /*THEME CHANGE HERE*/
padding: 4px 0;
margin: 0;
text-align: right; /*set value to "left", "center", or "right"*/
.chromestyle ul li{
display: inline;
.chromestyle ul li a{
color: #000000;
padding: 4px 7px;
margin: 0;
text-decoration: none;
border-left: 1px solid #DADADA;
.chromestyle ul li a:hover, .chromestyle ul li a.selected{ /*script dynamically adds a class of "selected" to the current active menu item*/
background: url(chromebg-over.gif) center center repeat-x; /*THEME CHANGE HERE*/
/* ######### Style for Drop Down Menu ######### */
.dropmenudiv{
position:absolute;
top: 0;
border: 1px solid #BBB; /*THEME CHANGE HERE*/
border-bottom-width: 0;
font:normal 12px Verdana;
line-height:18px;
z-index:100;
background-color: white;
width: 200px;
visibility: hidden;
.dropmenudiv a{
width: auto;
display: block;
text-indent: 3px;
border-bottom: 1px solid #BBB; /*THEME CHANGE HERE*/
padding: 2px 5px;
text-decoration: none;
font-weight: bold;
color: black;
* html .dropmenudiv a{ /*IE only hack*/
width: 100%;
.dropmenudiv a:hover{ /*THEME CHANGE HERE*/
background-color: #0000ff;
color: #fff200;

Try this:
.chromestyle{
     font-weight: bold;
     height: 29px;
.chromestyle:after{ /*Add margin between menu and rest of content in Firefox*/
content: ".";
display: block;
height: 0;
clear: both;
visibility: hidden;
.chromestyle ul{
border: 0px solid #BBB;
width:100%;
background: url(chromebg.gif) center center repeat-x; /*THEME CHANGE HERE*/
padding: 4px 0;
margin: 0;
text-align: left; /*set value to "left", "center", or "right"*/
.chromestyle ul li{
display: inline;
.chromestyle ul li a{
color: #000000;
padding: 4px 7px;
margin: 0;
text-decoration: none;
border-left: 1px solid #DADADA;
.chromestyle ul li a:hover, .chromestyle ul li a.selected{ /*script dynamically adds a class of "selected" to the current active menu item*/
background: url(chromebg-over.gif) center center repeat-x; /*THEME CHANGE HERE*/
/* ######### Style for Drop Down Menu ######### */
.dropmenudiv{
position:absolute;
top: 0;
border: 1px solid #BBB; /*THEME CHANGE HERE*/
border-bottom-width: 0;
font:normal 12px Verdana;
line-height:18px;
z-index:100;
background-color: white;
visibility: hidden;
text-align:left;
.dropmenudiv a{
width: auto;
display: block;
border-bottom: 1px solid #BBB; /*THEME CHANGE HERE*/
padding: 3px;
text-decoration: none;
font-weight: bold;
color: black;
* html .dropmenudiv a{ /*IE only hack*/
width: 100%;
.dropmenudiv a:hover{ /*THEME CHANGE HERE*/
background-color: #0000ff;
color: #fff200;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Problems with RH 9Printed Documentation not displaying some popups, drop-downs, and links

I generate a Word document for reviewers. PrintedDoc properties include: Retain hyperlinks; Include drop-down text; Include expanding text.
Sometimes the Word 2010 document includes hyperlinks, sometimes it doesn't.
Popups typically don't work in the Word document.
Drop-down and expanding text appear intermittently in the Word document.
Has anyone experienced this and have a solution?
Thanks.
Carol

I have never known hyperlinks to fail except in two situations.
The target topic is not in the printed document. Obviously it cannot link to something that is not there.
The hyperlink is a popup.
Not sure what you mean by popups not working in a printed document. If you mean the links to them break, then see above. Known issue.
I'm not sure why you are having the dropdown and expanding text problem as I have not known that to be an issue either. Is it always the same dropdowns that fail? Have you compared a good dropdown and a bad dropdown?
Take a look at Printed Documentation on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Use checkboxes with drop down and submit button to pas values

I have a form with six checkboxes, one drop down, and one submit button. I want the check box ON values to be appended to the hyperlinks stored in the drop down. The onclick event of the submit button sends the form results to a url with the checkbox values appended to the end of the hyperlink in the drop down. Need code please. Several programmers have bailed out on this when they got down to the event in the submit button. Can you Sun experts do better??? Here is the code for the form WITHOUT a properly programmed submit button and no javascript.
<form name="jump">
<select name="menu">
<option value="http://www.whateversite.com/CP/View2Ref.php">Option 1 View 2 Test</option>
<option value="http://www.whateversite.com/CP/AllNew.php?BK=Tap&CH=10&VR=20">option 2</option>
<option value="http://www.whateversite.com/CP/AllNew.php?BK=Tap&CH=10&VR=20">option 3</option>
<option value="http://www.whateversite.com/CP/AllNew.php?BK=Tap&CH=10&VR=20">option 4</option>
</select>
<input type="button" onClick="window.location.href=document.jump.menu.options[document.jump.menu.selectedIndex].value;
" value="GO">
    <input type="checkbox" id="chkbx_TR_id1" name="TR" value="ON" alt="TRCheckbox" title="Search 1" tabindex="4">TR
    <input type="checkbox" id="chkbx_ES_id2" name="ES" value="ON" alt="ESCheckbox" title="Search 2" tabindex="4">ES
    <input type="checkbox" id="chkbx_NV_id3" name="NV" value="ON" alt="NVCheckbox" title="Search 3" tabindex="4">NV
    <input type="checkbox" id="chkbx_BT_id4" name="BT" value="ON" alt="BTCheckbox" title="Search 4" tabindex="4">BT
    <input type="checkbox" id="chkbx_SM_id5" name="SM" value="ON" alt="SMCheckbox" title="Search 5" tabindex="4">SM
    <input type="checkbox" id="chkbx_EN_id6" name="EN" value="ON" alt="ENCheckbox" title="Search Bible Encyclopedia" tabindex="4">ENThe resulting URL when the submit button is hit should be like this if all check boxes are checked.
http://www.whateversite.com/CP/AllNew.php?BK=Tap&CH=10&VR=20&EN=ON&TR=ON&ES=ON&NV=ON&BT=ON&SM=ON&TR=ON"
Thank you in advance for any replies.

This forum is concerned with Java and not Javascript (they are not the same) . Though there are forum members who could help you on this you would probably do better to go to a Javascript forum.

I am changing a keynote to a ppt and a window drops down and says an unknown error occurred

I am changing a keynote to a ppt and a window drops down and says an unknown error occurred

It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook?

Are "Back to my MAC" and "Port Forwarding" mutually exclusive?

I have been using APExtreme and Port Forwarding successfully for several weeks now. The PF is to allow access to game players on a PC which acts as a server on the web. All Good.
One more thing, I have a ISP provided wireless modem/router to talk to the cable and the world. It seems to work either bridged or un-bridged.
I have disabled the wireless on the ISP's modem/router. (Actually the ISP's device doesn't hold a candle to the APE.)
Still all good.
So the firewall is on in the APExtreme and none on the modem router, and I have a port defined for my gamers to get access to my server in the APExtreme.
I now want to implement Back to my MAC on my MBP and my other Apple devices. I believe these use iCloud for which I have an account and it seems to be working well with my iPhone.
In Properties, when I select BtmM, iCloud says communications will be slow if I have port forwarding on. Also I will not be able to use the router function in my Modem/router.
I'd really like to have the modem/router firewall up, and do the port forwarding there, but the BtmM will likely not get through.
So what does anyone suggest?
Can I use BtmM and port forwarding without too much degradation?
Please advise.
Thanks
Barry

To best answer your question on whether the two are "mutually exclusive," let take a look at how Back to My Mac (BTMM) basically works.
BTMM - General Requirements
OS X Leopard 10.7.3+
Active iCloud account. Each Mac & the AirPort router, that will be relying on BTMM, needs to be configured with the same account.
A publicly reachable IP address for your router.
A router that supports either NAT-PMP or UPnP. For AirPorts, be sure it is running 7.6.1+ firmware.
BTMM uses TCP port 5354 and UDP ports 4500 & 5353 for communications.
BTMM - Basic Communication Flow
For a computer connected to the Internet via a router, BTMM "asks" the router for its configuration information. For a router, like your AirPort, that uses NAT-PMP, BTMM will ask the router to assign arbitrary public ports. In turn, the router will provide these port assignments (& the router's Public IP address) back to BTMM.
BTMM then sends this information to the iCloud account. In background iCloud updates a special set of DNS entries to be used by BTMM. These entries are then made available to all BTMM clients using your iCloud account. When a computer, with BTMM enabled, uses your iCloud credentials, it automatically retrieves a list of all other computers/routers that are registered with the same account. All these devices should then appear under the SHARED section of the Finder.
When attempting to connect to a remote computer (or router), BTMM creates a secure connection to that remote device using the information from the iCloud account.
Once the connection is established, the devices can then communicate with each other.
So potentially, unless you are using Port Mapping for any of the ports BTMM uses, they should not conflict.

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded?

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded with the message or not?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Xbox 360/one problem and port forwarding

For a couple months now (since I got my AirPort Extreme) I have not been able to connect to a certain friend on xbox. I can connect to anybody else however. The only way we can (kind of) connect is if somebody else is host and we both connect to him.
My NAT type is Moderate. When I try to test my connection on my xbox it says that I can connect but I am limited in matchmaking (this is joining games and using voice chat, which is the problem named above for my particular friend). The xbox shows the error and suggests that I enable UPnP or open the port 3074.
The problem is that I have already have! I gave my xbox a static IP and forwarded the port 3074 to that IP.
(I have also tried forwarding all the ports that xbox live uses to the xbox. These being:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
as found on the xbox website... https://support.xbox.com/en-US/xbox-360/networking/network-ports-used-xbox-live
I made sure to put them in the right text boxes for UDP and TCP so that is not the problem either.)
I know that the AirPort Extreme does not support UPnP but does have a similar thing called NAT Port Mapping Protocol which was already enabled. (I tried all possibilities of enabling/disabling NAT...Protocol and port forwarding/not port forwarding.) --- This is not the solution as I see it
In short: My xbox tells me to open port 3074. I already have. It still tells me to open it and still won't work.
I posted this on the apple discussion page (instead of the xbox discussion page) because I know that it's not an xbox problem. When I had my old linksys router it worked perfectly.

I have this exact same question and problem. I know this doesn't help, but would appreciate any updated information if you find an answer. I'll keep working on this also and let you know if I find an anwer.

CSS sheet covers up date drop down, and other Date field issues

Portland needs a little help once again.
My CSS stylesheet object acts like it has a higher "zIndex" then the date dropdown on an inputField. This causes me to only see half the calendar or none of it. Anyone else seen this and how did you get around it.
Also, When I test my BSP page the date drop downs, tables, etc all look great. However when the BSP page is rendered on an iView in EP6.0 they look terrible. Colors change, etc. What is happening here and how do I get around it.
Much Thanks in Advance,
Anthony

Please make these corrections in to your system that solves your problem.
1) Call transaction se80
2) Click on "MIME Repository"
3) Goto /SAP/PUBLIC/BC/UR/Design2002/js
4) Open each of these files:
       sapUrMapi_ie5.js
       sapUrMapi_ie6.js
       sapUrMapi_nn6.js
       sapUrMapi_nn7.js
    and replace 'ur_pop_' with 'ur_'
    and replace 'class=\"urCalArrPrev\"' with
    'class=\"urPagHBtnPrevItem\" style=\"background-repeat:no-repeat;
background-position:left\"'
    and replace 'class=\"urCalArrNext\"' with
    'class=\"urPagHBtnNxtItem\" style=\"background-repeat:no-repeat;
background-position:right\"'
    and replace 'class=\"urCalArrNextDsbl\"' with
    'class=\"urPagHBtnNxtItemDsbl\" style=\"background-repeat:no-repeat;
background-position:right\"'

The back/forward buttons on the tool bar only go one page at a time. I used to be able to click a drop-down and select how far back/forward I wanted to go. How can I get that back

I can only navigate back/forward one page at a time. The drop down box that used to allow me to see the recent pages and select the page I wanted to go to was immediately to the right of the "forward" button. I can right click over the forward/back buttons and get the dropdown list of recent sites.

Use right-click on the back/forward buttons to bring up the context menu, the drop down was never needed, and I had suppressed it for a long time to save space.
that is item #5 in the following, you might want to check out other items there.
You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

My home page is MSN and whenever I scroll down the page, the "Bing Web Search" menu drops down and covers part of the page in Windows XP. How can I prevent this from happening?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/811325''
This only happens on the home page. The drop down appears as soon as the "Bing Web Search" at the top of the page disappears as one scrolls down the page and remains visible until I scroll all the way back to the top of the home page.

Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

No devices in DMZ drop down and PORT forward does ...

Similar Messages

Maybe you are looking for