No dialogue box when importing hdv into fcp, normal?

I'm using a Canon Vixia HV40. When I import into FCP no dialogue box appears, just a small box that lets me name the file and import. I am choosing log and capture.
It will then import but without showing any progress and I have to press the quit button first to view the clips.Is this normal for HDV importing? I'm new to HD.

Can I use a capture card with an iMac?
No...sorry.
Do you happen to know what setting to use when I capture from native 24p. Which Pro Res setting do I use?
I don't. The one time I did capture ProRes in the manner you are, the tape was 1080i60, so it was pretty standard. Now..."native" 24p...you can't get that on tape. Impossible. NATIVE means that it was recorded at 24fps (running at 23.98). Tapes don't do that. They run at 30fps (29.97). So how the HV40 does it records 24fps onto a 30fps tape, and you need to remove that pulldown when you capture.
HOW? No clue. I don't work with that format. Even if you captured at 29.97, you cannot remove pulldown after the fact with HDV...the GOP format prevents it. You first need to capture as ProRes, THEN remove it...or....
I see an HDV 1080p24 Firewire Basic option, and an HDV-Apple ProRes 422 1080p24 option. What do those get you? Oh, what version of FCP?
Shane

Similar Messages

Audio-yes, Video-no (totally black) when importing .mov into FCP X, please help!

Hello
I am trying to import some .mov files into Final Cut Pro X. The files were originally .RTS, shot from a Canon XHA1 in 1080i, I converted them to .mov using SmartConverter and they play absolutely fine in Quicktime. However, when I import them into FCP X, the audio plays fine, but the video just shows a black screen. The codecs of the .mov files are standard H.264/AAC. My other .mov files (from the same camera that were shot in 1080p instead of 1080i) import fine into FCP.
Any advice would be greatly appreciated!
Laura.

Here's a print screen of the smart converter..

No audio when importing AVCHD into FCP X? Simple solution.

After hours of trial and error and several phone calls to support, I figured out why my AVCHD footage (MTS files from a Canon vixia HF S100) had no audio when importing into FCPX. The solution was to simply uncheck the box - "Remove silent channels" - under Audio in the pop-up import window . That did the trick.
I had tried importing from a card reader, the camera and from an external hard drive and then tried 2 converter programs (MPEG streamclick and Wondershare Video Conerter Ultimate.)
Final Cut Pro X
OS X 10.8.2

It's usually something simple that can catch the best of us.
Al

Frame Rate change when importing video into FCP 5

I am importing an HD h264 file into FCP 5. The video when opened in QT shows that it's frame rate is 30fps, what I exported it at. When I Import the file into FCP 5 it changes the frame rate to 29.97fps, which is causing major video/audio syncing issues. Any thoughts on how to stop the frame rate change when importing? I tried changing my system settings and audio/video settings before the import to match the file and it is still picking it up at 29.97, major headache especially since I'm cutting industrial.

yeah I'm kinda limited, working with video for the web and I'm making revisions as to what has been already posted. The H264s are the originals per say as we are using a screen capturing program to obtain the video, I could re export the originals at a truer format, but with the resources I'm given, its not truly the option I can afford to take. I've found a workaround through using imovie of all things, but I rather be in FCP. I've done some editing with h264s before and this is the first time I've seen this happen, it kind of reminds me of when I had an editor a few years back digitize video that was drop frame as non-drop.

Can't import Media into FCP X

In the last week or two when I try to import media into FCP X I end up with a very dark and locked import screen. The only way I can recover is to force quit FCP X. It doesn't always happen but it is getting more and more frequent.
I have not updated to Marverik and I'm running the latest version of FCP X on the same iMac I have used since installation.
Any suggestions beacuse it really is starting to beome very, very frustrating.
Thanks

They system is hanging up, waiting on some command to finish, which is not able to. So let's look at ways to fix this. Becasue you never want to do an upgrade to fix problems. Only upgrade a proerly working system. Otherwise, you may just be hauling old problems into a new envoronment, and making things worse. I've seen it a lot over the years.
First, verify that all of your drives have at least 15% of their total capacity as free space. Not enough free space on any dirve can cause similar odd behaviors.
Second, you need to do some housee cleaning. Start by downloading and running the free application "Preference Manager" from Digital Rebellion (dot com). Use it to trash the FCPX preference files. It is easy and safe to you. None of your media or projects will be touched. After that, run Disk Utility to "Repair" all of your drives (ignore "Verify", total waste of time).
If none of that helps, I'd recommand you download the free application "FCS Remover" from Digital Rebellion. Use it to uninstall FCPX. Some folks say to just move the app from the Applications folder to the Trash. That leaves a bunch of other files hanging around that could be bad. Use this app. Once you've uninstalled FCPX, launch the App Store, go to the Purchases section, and FCPX will have an "Install" button. Reinstall a fresh copy, see if that helps.

Adobe Premiere Pro CS6 crashing when importing HDV Video

For some reason I keep getting crashes when importing HDV (720p60) video into the timeline of Adobe Premiere Pro CS6. This has happened on two different machines, with similar specs.
Per the suggested guidelines, here are the specifics:
Version of Premiere Pro: CS6, Version 6.0.5 (001 (MC:264587))
All updates have been installed.
Operating System: Mac OS X 10.8.5.
Source footage: HDV 720p60 video in .MOV container.
Full text of error message: "Sorry, a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project."
Link to full crash report: http://goo.gl/Gn8Bzn
Crash occurs when trying to import HDV .MOV file.
This is a consistent problem when importing .MOV files of this type.
Complete Adobe Creative Suite is installed. Also using Episode Pro encoding software from Telestream to prepare HDV video. No other external video hardware or codecs installed.
Yes, I am using the Mecury Playback Engine GPU acceleration.
Thanks in advance to anyone who can help me figure this one out.

Thanks Mark. Here is the Media-Info Data of one of the clips:
File: CHRISTOPHER.mov
Size: 8.11 GB
Format: QuickTime/MPEG-4/Motion JPEG 2000 format
Stream count: 2
Duration: 00:58:29
Bit rate: 19841 kb/s
Meta info:
    creation_time: 2013-12-23 18:51:36
Stream 0
Type: video
Codec: mpeg2video
Codec profile: Main
FourCC: hdv9
Duration: 00:58:29
Width: 1280
Height: 720
Sample aspect ratio: 1:1
Display aspect ratio: 16:9
Pixel format: yuv420p
Frame rate: 59.95 fps
Bit rate: 18300 kb/s
Meta info:
    handler_name: Apple Alias Data Handler
    creation_time: 2013-12-23 18:51:36
    language: eng
Stream 1
Type: audio
Codec: pcm_s16be
FourCC: twos
Duration: 00:58:29
Bit rate: 1536 kb/s
Sample rate: 48000 Hz
Sample format: s16
Channel: 2
Meta info:
    handler_name: Apple Alias Data Handler
    creation_time: 2013-12-23 18:51:36
    language: eng

Aspect ratio importing DV into FCP X

Can someone explain how DV format works (I think I understand this) and how importing DV into FCP X works (I definitely don't understand).
I have some old PAL DV files which I want to compress using Compressor, with the aim of later importing them into FCP X. I can compress them in one of two ways: compressing to 720x576 with the standard PAL aspect ratio, so they appear (eg. in QuickTime Player) as 768x576. Let's call this 'Old Style'. Or, I can compress them so they have square pixels, and genuinely are at 768x576. ('Square pixels').
Both display using QTP7 as 768x576, but Square Pixels is compressed slightly so there is more of the picture visible at left and right of the screen. Objects in the image are therefore thinner left-to-right than in Old Style.
Now, if I import them into FCP X, in the event browser Square Pixels still displays as 768x576 and looks just as it does in QTP. But Old Style is now wider than 768x576 and has the extra bit of picture that Square Pixels displays. So they're both displaying the same image, but Square Pixels has it compressed to fit into 768x576, whereas Old Style has it wider, and consequently people are fatter left-to-right.
When I import these events into a project, things change again. Old Style appears exactly as it does in the event browser (ie. about 786x576, with the whole image displayed). Square Pixels stretches the image north-south, and this means that part of the top and bottom of the image are chopped off.
What is going on? Is there a website which can explain this clearly? Which is the better format for me to compress my video into?
Cheers,
Martin S Taylor
FCP X 10.1.2
Compressor 4.1.2

I don't understand your question?
DV footage on DV or mini-DV tapes is already digitised . . . . hence the name DV or Digital Video.
If you have a DV camera or deck you can plug it into your Mac via FireWire and import the footage straight into FCP X.

Imported clips into FCP 10.1.3 contain no audio in Yosemite...

I am running FCP 10.1.3 on a mid 2012 15" MBP Retina with the following specs...
2.7 GHz Intel Core i7
16GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
Ever since I updated to the public beta of Yosemite, when I import clips into FCP X I get the clip but my audio is no longer attached. I assumed this was an issue with the beta and that it would be resolved in the actual release but alas, that is not the case. Does anybody have any experience with this or could anyone point me in a direction. Much appreciated.

Here is the requested screen shot. In the events list, you will see the clips have no waveforms. In the inspector, you can see that Audio is not even an option and in the Project Timeline, you will see that there is no Waveform present. This clip has audio attached. The source media is irrelevant as this happens with screen capture clips or with clips I've shot with 3 different cameras. If I check the source file, in finder or in the camera the audio is present. This only started happening when I upgraded to Yosemite.

Importing jpg into FCP

Hi,
I've never had problems with importing jpg's before into fcp, but I was given a large group of photos and I imported them into fcp, looked at them in the viewer and they were fine. However, when i dragged them into the timeline, they came up distorted in the canvas. What is going on here? The other jpgs from other sources still work fine in my canvas.
Matt

Here are the answers to you questions:
what are the pixel aspect ratios of the jpegs?
988x1500
are they square pixels?
i don't know whether they are square or not.
Have you rendered the timeline?
Yes I rendered the timeline
best wishes
David
Remember to mark an response helpful or solved.
It protects the integrity of the board.

Importing TIFF into FCP project

Hi everybody,
I am importing Tiff into a FCP project.
I have all my clips listed in the order they were shot to go into the FCP project.
If I select more than one at a time to import within FCP, the Tiff are put in any order.
Would anyone know if there any way to import more than one TIFF at a time in such a way they appear in FCP in the order they were created ?
Thanks in advance
Bernard

The numbering works, just keep in mind - as Jim noted earlier - you must have the same number of digits in each name. Sequences of less than 99 should use 2 digits (01-99), over 100 but less than 999 = 3 digits (001-999) , over 999 but less than 9999= 4 digits (0001-9999) and so on.
Why is this? Try this experiment, name a series of files in the sequence of 1,2,5,11, 21,101 When you import that into FCP, it will be ordered: 1,11,101,2,21,5.
However, if you name them 001, 002, 005, 011, 021, 101 they will order themselves as you would expect.
I don't know how you are acquiring the images, but some scanning software allows you set up a common name + sequence number and automatically increment it after each scan. This can be a great timesaver.
have fun.
x

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

Importing Flash into FCP

I have Flash Pro 8 and FCP Pro HD and am still trying to learn both.
Can I create a piece in Flash and import it into FCP? If I need to upgrade FCP, I will - I just need to know if it's possible, and how to do it.
thanks a lot.
j.

On a related question, I have a number of flash animations for a client, a comic, and the movie is in 5 parts...I have the latest version of FCP and of Flash, and I am having a lot of problems exporting to quicktime and importing to FCP. I have tried export movie>quicktime and quicktime movie, with a variety of codecs (animation, motion graphics, DV), and every time some tweens(individual) are dropped, and some sounds from the flash movie. There must be a way to just clone what I can see in my swf into FCP? If anyone knows how, please help.
(and please, dont tell me to learn the apps as I have a professional level knowledge of both.)

HT1473 When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will.

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.

When importing Raw into A3, in what format is the picture displayed on the screen? Jpeg or Tiff ?

None of the comments you have gotten are particularly useful. The display is independent of format of the file. It's rendering is of the full pixels in the image file that you have imported, modified by any adjustments you have made, or not if you ask to see the Master.
Even if your Master was imported as a JPEG, as seen on the screen it would have been decompressed, and you would see all the pixels (that the screen is capable of). However, a JPEG may have lost some detail in the compression, but when decompressed has the same number of pixels as the equivalent uncompressed photo format -- but some of them may result from interpolation, and not be the original.
Ernie

No dialogue box when importing hdv into fcp, normal?

Similar Messages

Maybe you are looking for