No Disassemble stage components can recognize the data

I got a very weird issue this Morning. There is one suspended flat file message in one receive location with the error "No Disassemble stage components can recognize the data". It has been running well before. At the begging, I thought it might
be due to the data of the message, but everything looks ok for the message so I tried to resume the message and it went through without that error anymore. My manager asked me what could be the reason but I really do not know. I checked the event log and did
not see anything special.
So anybody has any idea what could be the reason for this error?
Thanks,
David
David

If this happened only once , then I would say one of those error which I would ignore now. Since this is something wired, this error is well document but for different cause. When the same message goes through when you resubmit, and if I had not seen this
error before/often, Ignore it this time.
If this happen more often, then try to identify the pattern, we can help then. As of now, sorry this issue is not seen in the past and ignore as one off. Or if its a often occurring error, give us more evidence to help.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

  • I can view the data in front end form, but data is not avilable in backend

    Hi,
    i created a form with three blocks.In first block i entered the data.Based on the data it will fetch recodrs from A & B tables and insert into C table.This logic i have written in backend and put commit in front end and back end. In the 2nd block iam using C table. i can view the data in front end(C table) . But i unable to
    see the data in C table when i go and see in back end.
    Form is used for only querying purpose. for the C block insert allowed and update allowed is false.
    Plz do the need ful

    Please try and post sufficient information for someone to replicate your problem. We are not looking over your shoulder and do not have access to your database.
    We need a minimum table structure, example data, a walk-through of how the form works - you mention 3 blocks and only half-way describe 1. Is another for the C block? Or is that a different form?
    e.g. Enter search data in Block A. Execute Query. Blocks A and B populated with data from database tables based on FK relationship B to A. User presses Save button, procedure in form updates table C based on data in form and issues commit. Execute Query in Block C retrieves just inserted data in table C.
    Is that remotely what's happening? Or something completely different?

  • Bought a new macbook air because my old computer is formatted. I want to sync my iphone to my new mac, so I can save the data on my iphone without losing data. how can I do?

    bought a new macbook air because my old computer is formatted. I want to sync my iphone to my new mac, so I can save the data on my iphone without losing data. how can I do?

    You need to copy everything form your old computer, or your backup copy of your old computer to your new one.
    The iphone is not a storage/backup device.  it simply mirrors the selected content of the computer to which it is synced.

  • I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

    I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
    I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

    No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
    If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
    going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
    If you have a Time Machine backup you may also be able to use that to retrieve them.

  • How we can upload the data through BDC for transaction J1ID

    Hi guru
    How w can upload the data for Transaction J1ID.In this we want to upload the data for Customer Excise details. I want to upload the data on behalf of Customer (KUNNR) becasue customer is a primary KEY. Table name: J_1IMOCUST
    Fields. 11 Fields.plz provide some code logic.
    KUNNR     J_1IEXCD     J_1IEXRN     J_1IEXRG     J_1IEXDI     J_1IEXCO     J_1ICSTNO     J_1ILSTNO     J_1IPANNO     J_1IEXCICU     J_1ISERN

    Hi,
    I dont see any difficulties in doing BDC upload for J1ID, You have to record by giving the New Entries button and then enter all the details of customers using table control technique.
    SEARCH SCN for Table Control in BDC
    Regards
    Karthik D

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • How many days we can store the data  in psa & ods ?

    hi guru's
    how many days we can store the data  in psa & ods ?
    Thanks & Regards.
    Prabhakarreddy

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How many years we can store the data in ODS as well as psa data ?

    Hi guru's
    how many years we can store the data in ODS? can u give particular years ?
    how many days we can store the data in psa ? could u tell me step by step procedure ?
    Thanks
    Reddy prabha

    Hi Prabhakarreddy,
    As many days as you like:
    In the PSA you can keep data as long as you like but you will need more and more disk-space. So its advisable to clean up from time to time.
    Example:
    PSA's from full loads Clean up in a weeks time,
    PSA's from Deltas: Clean up after you are sure data is correct. (e.g. a month or 90 days)
    Remember that you cannot do a reconstruction from dataloads of which you have deleted the PSA. If some thing is wrong you will have to do an Init again!
    In ODS's you must keep data in order to keep your delta loads to cubes in order. Removing data will force you to do a new initial load.
    Sometime companies delete old data form ODS's that is older than a certain period (e.g. more than 3 years old) by running a selective deletion. You will have to do an init again. But loads and activation may run faster and of course you gain on disk space.
    Udo

  • How we can see the data related to finance ??

    Hi Gurus,
    I have attend for one interview and faced one question is that how can we see the finance related data in r/3?
    they asked the same question.
    can you please let me know how we can see the data for perticular module like HR,FInance...
    Points 'll be assigned..
    Regards,
    Syam

    For Finance the standard datasources are
    0FI_GL_4
    0FI_AR_4
    0FI_AP_4
    Go to R/3 lbwe
    select these datasources
    click on manage
    you will get a window with fields. here in the right hand corner there is a drop down which giives table names
    OR
    Goto RSA3 and give the datasource name

  • I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Rescheduling of Maint order..(how we can postpone the date of maint order)

    Hi friends,
    I would like to know that how we can postpone the date of maint order.I am working on preventive maintenance plan.Let consider my maint plan is based on key date so that system is generated orders like for 90 dyas cycle time as below.
    10 jan
    10 feb
    10 mrach
    But suppose there is certain req.from sales dept. so production dept want to use the machine. So machine is not available on that day (10 jan) but it will be free after 2 days for maintenance .Then I want to know
    1.how i can shift the order date from 10 to 12 jan.
    2.What about the planning cycle? It remains constant as per system date or it will change proposed date automatically.
    Awaiting for reply..
    Thanks and regards,
    Pravin

    Hi,
    If automatic scheduling is active,
    In case of backward scheduling (default for preventive maintenance) change the the basic end date
    In case of forward scheduling change basic start date.when the order is saved order will be rescheduled automatically.
    You can avoid the shift of next mainteannce call by giving proper scheduling parameters in Maintenance plan.

  • In ale we can transfer the data sap to sap only?

    in ale we can transfer the data sap to sap only?plzz tell
    Edited by: Alvaro Tejada Galindo on Feb 6, 2008 5:12 PM

    hi
    good
    check this links
    Search the forum posts with keywords "LSMW IDOC". Perhaps...
    idoc in lsmw
    thanks
    mrutyun^

  • HT1339 Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod

    Hi i have an I pod and i had used it as hard disk also. Now when ever i connect it with my Laptop it shows restore to factory setting....i wanted to knwo is there any way i can save the data which i had already stored in the I pod. I dont want to loose that data???

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • Can you tell me how I can put the data of sql server into SAP to auto gener

    Dear all,
             Can you tell me how I can put the data of sql server into SAP to auto generate PR?
    Best regards,
    Merry zhang

    Many thanks ,it is ok now.

  • My iphone 4s will not turn on or connect to itunes.... is there any way i can get the data from the phone?

    is there any way i can get the data from the phone?

    Hi webby84,
    Welcome to Apple Support Communities.
    It sounds like you're experiencing a hardware issue with your iPhone.
    These links are a good starting point for troubleshooting:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

Maybe you are looking for

  • How to boot new/used MacMini from external drive?

    Last week I purchased a used MacMini (2 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3) that had OS X 10.5.6 pre-installed. I was starting up from my OSX 10.5 install disk so that I could change the password, but the disk drive got noisy and repeatedly res

  • MR11 error - Error while determining currency type - C+, 171!!!

    Hi All We try to do MR11, with some of the companies we do not have a problem but a few of them give us the following error message. Message no. C+171 Error while determining the currency types for 20000134668 00001 Procedure Check the configuration.

  • Drop down in the selection for the field from the table

    Hi. i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry. please tell me how to use the function module and what could be the line of codes. the drop down is

  • Aligning two layers using manually selected reference points

    I am trying to align two images that have the same pattern of thousands of dots, but the two images are not properly aligned or scaled but do have the same aspect ratio. I have tried manually aligning the two images resulting in no forward progress a

  • Linking a button in flash to a dreamweaver site

    I am having some trouble linking a button in my flash movie to a separate dreamweaver site. The flash movie will be placed in the homepage of a website and i want to be able to click a button in it to go to a separate page. the code i am trying is :