No discrete 7.1 side left and ri

Anyone get a faulty card or something that plays side left and right at the same time when either one is clicked on in the test? Also when in the THX console when the sides are going during the polarity test one way plays white noise then when you click it plays garbled crappy static instead of changing the phasing sound of the white noise. All this is in reference to an x- fi platinum. Using the 4 pole aka camcorder cables (3 band /8th inch minijack to 3 rca plugs A/V ends) on the 2 outputs next to the AD link connection on the pci card. After trying all connections the card is beign swapped out because so far all testing points to just a card defect.

Well I stand corrected...with the lucky find of an extra 4 pole camcorder cable laying around in of all places the camcorder bag I just tested the card again and woohoo I now have side left and right independent of each other. Seems that the $200 sound card is just fine other than the minijacks are scrunched too close together for these especially big ended fancy camcorder cables that cost 6 bucks each if you gotta have em now. I think the one cable was bad you know being new and all grrr. Or after I test it with the camcorder, it could just be they are a little too fat to plug both in right next to each other into the x fi and get them to not bridge the side channels together into a mono single channel by not going in all the way. Problem solved but. Here's an Idea creative, Let me buy midi cables if I somehow happen to want those never and include the cables that fit right next to each other to allow 7. to work right out of the box and save the poor tech support personel the frustration of yet another dumb tech support call. By the way creative does sell these for only like 6 0r 7 they told me and they will fit right unlike the fancy ones I got.

Similar Messages

  • My iPad fell one night from one side (left) and now its border from the inside or the main screen  border (left side- portrait) is thicker on the other side (right side) like it moved left when it fell :(( so sad this is a gift from my mother. please help

    my iPad fell one night from one side (left) and now its border from the inside or the main screen  border (left side- portrait) is thicker on the other side (right side) like it moved left when it fell :(( so sad this is a gift from my mother. please help

    thank you. it just annoys me and im scared that my mom would notice it coz she bought it for me..

  • Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    hello,
    i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

  • Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper  right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

    Hi,
    Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

    Hi Warunicorn,
    Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
    Jim

  • Display resolution is different left and right sides

    Hi, my HP G42 laptop now has a different display resolution on the left and right sides. The left half seems to have less resolution than the right side, the right side looks like it's in HD, the left side looks washed out. I'm not sure if it is a hardware issue or a setting/software issue. The first time it appeared was after a windows 7 update was completed and installed, I'm not sure if that was just a coincidence. Any suggestions would be greatly appreciated. It works but is very annoying to look at.
    Thank you,
    Ray

    Hi Ray_M,
    Welcome to the HP Forums! I see that you are having a problem with two different resolutions on each half of your screen. The easiest way to determine where the problem lies is to connect it to an external monitor. If the image is normal then we know it is an issue with the display screen but if the issue occurs on the external monitor then we know it is a problem with the drivers or the video card itself.
    What is the product number for your g42? There are a number of different models in that series.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • IPad2: After upgrad to iOS 8, video output lost left and right side

    I have a cable for my iPad2, once plugged in the bottom slot, it outputs video to TV Component port and audio to my amplifier. It's been working for years. After iOS 8 upgrade, I notice the video output lost left and right side. It's like
    [before iOS 8]     Apple iPad is a wonderful product for me.
    [after upgrade]             iPad is a wonderful product
    The "Apple" on the left, and "for me." on the right of screen is gone in output.

    Change your Aspect Ratio on your TV to 16:9

  • Dead Space on left and right side

    Is there any way to get rid of the dead space on the left and right hand sides? Thanks.

    Hi there,
    you can't completely get rid of the dead-space on the left and on the right. But you can increase the content width thus reducing the dead space.
    Select the page in iWeb, Open the Inspector, Go to the Page tab (second from the left) and select Layout, increase the number displaying under Content width (everything up to 950 should be alright but note that for some templates it doesn't work so good 'cause they weren't built to be increased... I hope they change that somewhen...)
    Regards,
    Cédric

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)

    Information all in the title.  I open a .ai file and the left and right sides of the image are cut-off based on the "page" box

    Did you open it in a lower version?
    It looks like you opened the PDF part of the file instead of the AI part.

  • The speaker is used when im using my phone in speaker phone mode or listen to music.This speaker is only the right  side hole  and the left one is mic

    The speaker is used when iam using my phone in speaker phone mode or listen to music.This speaker is only the right side hole and the left one is micophone?

    Correct. As indicated in response to your duplicate post.
    Stedman

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • Missing left and right sides of movies

    Why am I not seeing the full left and right sides of movies, converted using instant handbrake, during playback in itunes or on ipod touch and classic?

    On the iPod touch, to show the whole video, double touch the screen while it's playing.
    As for the other iPod and iTunes, I don't know.
    -Messymeese
    P.S.
    If the iPod touch thing that I said doesn't work, then I don't know what to do.
    Actually, did you happen to mess with the cropping settings while using hadbrake?

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

    I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

    You can use this extension to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Maybe you are looking for