No disk choices shown during guest installation

VB 4.3.22 installed on Mountain Lion (OSX 10.8.5), trying to install Snow Leopard (10.6) as guest. The installation has progressed to where the guest desktop appears and a little later it wants me to "Select the disk where you want to install Mac OS X". But there are no choices in the box, the "Install" and "Customize" buttons are gray, and the only choice is "Go Back". Going back doesn't improve the situation, nor does deleting everything and starting all over with the guest install. Please see screen shots. The first is the empty selection box. The second one shows the VirtualBox VMs--SnowLeopard files along with the Manager window.

As far as I'm know, only Mac OS X Server is supported in a guest environment.

Similar Messages

Error "NOTICE: [0] disk access failed" during guest domain network booting

Hi,
Could you please tell me what is the problem with my configuration?
I created guest domain on my T1000 server.
As a disk I used disk from disk array: /dev/dsk/c0t18d0
I added disk using commands:
# ldm add-vdsdev /dev/dsk/c0t18d0 vol1@primary-vds0
# ldm add-vdisk vdisk1 vol1@primary-vds0 myldom1
# ldm set-variable auto-boot\?=false myldom1
# ldm set-variable boot-device=/virtual-devices@100/channel-devices@200/disk@0 myldom1
Then I logged to guest domain and booted from network to install OS from JumpStart server:
{0} ok boot net - install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: - install
Requesting Internet Address for 0:14:4f:f9:78:19
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring devices.
NOTICE: [0] disk access failed.
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
ERROR: No disks found
- Check to make sure disks are cabled and powered up
Solaris installation program exited.
Configuration:
[root@gt1000a /]# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 0.5% 2h 23m
MAC
00:14:4f:9f:71:4e
HOSTID
0x849f714e
VCPU
VID PID UTIL STRAND
0 0 5.3% 100%
1 1 0.5% 100%
2 2 0.5% 100%
3 3 0.4% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
keyboard-layout=US-English
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
myldom1@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 00:14:4f:fa:ca:94 bge0 switch@0 1 1
PEER MAC PVID VID
vnet0@myldom1 00:14:4f:f9:78:19 1
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 vol1 /dev/dsk/c0t18d0
CLIENT VOLUME
vdisk1@myldom1 vol1
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
myldom1 active -n---- 5000 12 2G 0.1% 2h 18m
MAC
00:14:4f:f9:e7:ae
HOSTID
0x84f9e7ae
VCPU
VID PID UTIL STRAND
0 4 0.5% 100%
1 5 0.0% 100%
2 6 0.0% 100%
3 7 0.0% 100%
4 8 0.0% 100%
5 9 0.0% 100%
6 10 0.0% 100%
7 11 0.0% 100%
8 12 0.0% 100%
9 13 0.0% 100%
10 14 0.0% 100%
11 15 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 2G
VARIABLES
auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:f9:78:19 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:fa:ca:94 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
myldom1 primary-vcc0@primary 5000
[root@gt1000a /]#
Kind regards,
Daniel

Issue solved.
There was a wrong disk name:
primary-vds0 vol1 /dev/dsk/c0t18d0
I changed to c0t18d0s2 and now I sucessfuly installed OS from Jumpstart.

ASM LABLED DISK NOT SHOWN IN GRID INSTALLATION

Hi Guru,
Im new to oracle,just started, we are installing ORCALE 11gr2 11.2.0.3 single node cluster for an test environment on RHEL 6.2.
we installed oracle prerequisite with yum provided by oracle with following command.
yum install "oracle-rdbms-server-11gR2-preinstall" ##did all pathch,rpm & parameter set automatically.
create users oracle & grid with required group.
part-ion disk
#fdisk /dev/sd*
n,p,1,<>,<>,w
#partprob /dev/sd*
Install oracleasm with "yum install kmod-oracleasm" including support & asmlib file .
oracleasm configure
ORACLEASM_ENABLED=true
ORACLEASM_UID=grid
ORACLEASM_GID=asmdba
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
ORACLEASM_USE_LOGICAL_BLOCK_SIZE="false"
oracleasm listdisks
DATA01
DATA02
VOTE01
VOTE02
VOTE03
ls -ltr /dev/oracleasm/disks/*
brw-rw---- 1 grid asmdba 8, 17 May 17 15:58 /dev/oracleasm/disks/VOTE01
brw-rw---- 1 grid asmdba 8, 33 May 17 15:58 /dev/oracleasm/disks/VOTE02
brw-rw---- 1 grid asmdba 8, 49 May 17 15:58 /dev/oracleasm/disks/VOTE03
brw-rw---- 1 grid asmdba 8, 65 May 17 15:59 /dev/oracleasm/disks/DATA01
brw-rw---- 1 grid asmdba 8, 81 May 17 15:59 /dev/oracleasm/disks/DATA02
started grid installation with (grid, asmdba) ./runInstaller
Every things seems good till the time.
while it looks for asmdisk during installation it will not show asm labled disk there with discovery string "/dev/oracleasm/disks/*" -----"OCRL:*"
Please help, im stuck in this issue from 5 days.
Regards
Sumit Sharma

Hello,
To resolve this issue, first reconfigure your ASMlib using following steps:
[root@host02 ~]# ll -ltr /dev/oracleasm/disks/ASMDISK0*
brw-rw---- 1 grid asmadmin 8, 17 May 15 11:05 /dev/oracleasm/disks/ASMDISK01
brw-rw---- 1 grid asmadmin 8, 18 May 15 11:05 /dev/oracleasm/disks/ASMDISK02
brw-rw---- 1 grid asmadmin 8, 19 May 15 11:05 /dev/oracleasm/disks/ASMDISK03
brw-rw---- 1 grid asmadmin 8, 21 May 15 11:05 /dev/oracleasm/disks/ASMDISK04
brw-rw---- 1 grid asmadmin 8, 22 May 15 11:05 /dev/oracleasm/disks/ASMDISK05
brw-rw---- 1 grid asmadmin 8, 23 May 15 11:05 /dev/oracleasm/disks/ASMDISK06
brw-rw---- 1 grid asmadmin 8, 24 May 15 11:05 /dev/oracleasm/disks/ASMDISK07
brw-rw---- 1 grid asmadmin 8, 25 May 15 11:05 /dev/oracleasm/disks/ASMDISK08
If the permission is not like this then do the following:
*[root@host02 ~]# oracleasm configure -i*
Configuring the Oracle ASM library driver.
Default user to own the driver interface [asd]: grid
Default group to own the driver interface [asd]: asmadmin
Start Oracle ASM library driver on boot (y/n) [y]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
[root@host02 ~]# oracleasm exit
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm init
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk "ASMDISK01"
Instantiating disk "ASMDISK02"
Instantiating disk "ASMDISK03"
Instantiating disk "ASMDISK04"
Instantiating disk "ASMDISK05"
Instantiating disk "ASMDISK06"
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]#
[root@host02 ~]# oracleasm listdisks
ASMDISK01
ASMDISK02
ASMDISK03
ASMDISK04
ASMDISK05
ASMDISK06
Hope it will work.
Thanks,
Ashish Shukla

About the amount of hard disk memory used during Testdrive installation

Dear all,
I have a question about installing SAP Netweaver Testdrive on Redhat Linux Enterprise 5.3. Currently I have a virtual machine (sun virtualbox) where Windows Vista is host and the guest operating system is RHLE 5.3 (32 bit). For doing several tests I would like to install the Testdrive on this linux system. Yet, the total available virtual hard disk memory is about 15 GB and I have already used more than 6GB.
Is there any way to specify the amount of hard disk memory used by Netweaver once it installs DB2 on the system? Because as it seems to me it takes more than 15 GB just for the database. But I'm not sure whether the whole space is really needed, particularly in my case where the aim of use is just for ABAP development and tests (for self-training).
Thanks in advance,
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Dec 5, 2009 11:23 AM

Hi,
You can refer the specific installation guide for the minimum disk space requirement.
Whatever functionality you use you need minimum space as mentioned in the installation guide.
You can configure slightly more memory than given in the installation guide to be safer.
Cheeers...,
Raghu

Tried installing latest iTunes (10.5.3.3). During installation received error message asking to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". No choice but to cancel installation. Any suggestions?

The problem started when my current iTunes kept popping up a window stating that my Auto Run was turned off. (which means iTunes will not be able to recognize when a CD is inserted or ejected). It asked if I wanted iTunes to run Auto Run and I select Yes every time (this window pops up every time I open my iTunes), but a second window pops up stating iTunes cannot turn on my Auto Run setting (but it will still be able to recognize CDs) to which I choose okay. A third window pops up after stating that iTunes was not properly installed and if I wish to import or burn CDs I need to re-install iTunes, except that I can import CDs since I did this only yesterday and this problem has been going on at least a month.
To add to this, I cannot cannot automatically update to version 10.5.3. (I don't recall which problem came first, my Auto Run problem or the fact that my iTunes can't update). iTunes suggested that I manually install the update, so I went to the apple site and tried manually installing the latest iTunes (10.5.3). However, during the installation process I received an error message. It asked me to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". I tried hitting Try again a few times but the same error message popped up, so I had no choice but to cancel the installation. Afterwards, I tried searching in my C drive but could not find "C:\Config.Msi\187e500.rbf"
Does anyone have any suggestions how I can update my iTunes?

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

When i download iTunes during downloading process on messege shown: An error occurred during the installation of assembly'Microsoft CRT.version="8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86.

HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .

You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again.

"ERROR disk not found" during boot cdrom installation

We were booting a T4-4 server from a Solaris 10 boot ISO and command I used was "boot rcdrom - install as nowin" (i was mounting the ISO using the serial redirection window etc, hence the rcdrom)
It worked great asking for the" language to be installed" and "network setting and etc."
then it starts communicating with the jump server to pick up the jumpstart script and etc still working great. but when it start to install, it returned with "ERROR no disk found"
I am sure there are two 600G disk on the server. not sure why it think there is no disk during the installation. googled it and some said something related to raid and i cannot get a conclusion.
{0} ok show-disks
a) /pci@700/pci@1/pci@0/pci@0/LSI,sas@0/disk
b) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
c) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
d) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
e) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
{0} ok devalias
screen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
mouse /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/mouse@1
keyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/keyboard@0
disk7 /pci@700/pci@1/pci@0/pci@0/@0/disk@p3
disk6 /pci@700/pci@1/pci@0/pci@0/@0/disk@p2
disk5 /pci@700/pci@1/pci@0/pci@0/@0/disk@p1
disk4 /pci@700/pci@1/pci@0/pci@0/@0/disk@p0
scsi1 /pci@700/pci@1/pci@0/pci@0/@0
net3 /pci@600/pci@2/pci@0/pci@3/network@0,1
net2 /pci@600/pci@2/pci@0/pci@3/network@0
rcdrom /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0
rkeyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@4/keyboard@0
rscreen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0:r1280x1024x60
net1 /pci@400/pci@1/pci@0/pci@2/network@0,1
net0 /pci@400/pci@1/pci@0/pci@2/network@0
net /pci@400/pci@1/pci@0/pci@2/network@0
disk3 /pci@400/pci@1/pci@0/pci@0/@0/disk@p3
disk2 /pci@400/pci@1/pci@0/pci@0/@0/disk@p2
disk1 /pci@400/pci@1/pci@0/pci@0/@0/disk@p1
disk0 /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
disk /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
scsi0 /pci@400/pci@1/pci@0/pci@0/@0
scsi /pci@400/pci@1/pci@0/pci@0/@0
virtual-console /virtual-devices@100/console@1
name aliases
{0} ok select scsi0
{0} ok show-children
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
f) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk
g) /pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk
h) /iscsi-hba/disk
q) NO SELECTION
{0} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
{0} ok show-volumes
No volumes to show
{0} ok

nothing seems to come up
{0} ok boot rcdrom -s
Boot device: /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0 File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: consconfig: cannot find driver for screen device /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
Booting to milestone "milestone/single-user:default".
Configuring devices.
Using RPC Bootparams for network configuration information.
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!

Trying to install Illustrator cs3, during the installation I am asked for photoshop cs4 disk I no longer have the photoshop cs4 disk

Trying to install Illustrator cs3, during the installation I am asked for photoshop cs4 disk I no longer have the photoshop cs4 disk

Do you own Illustrator CS3? An older version should not only not be asking you to utilize a newer version in any way, it couldn't even know about the existence of it.

Insufficient Disk Space error during installation of OEPE

I tried to install OEPE under Oracle Linux 5. During the installation, I got the "Insufficient disk space error" saying there is only 0MB available at my home directory. I checked my disk space and found that was not the case. I have no clue why I got this error and how to solve the issue. Any help would be appreciated.
[lixuxu@slc01pne ~/download]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/xvda1 144G 19G 118G 14% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
slcnas411:/export/home1/lixuxu
6.0T 3.5T 2.6T 59% /home/lixuxu
slcavere01.us.oracle.com:/vol/ade_infra/prod/LINUX
96G 5.9G 91G 7% /usr/dev_infra/platform
slcavere01.us.oracle.com:/vol/ade_infra/prod/GENERIC
96G 5.9G 91G 7% /usr/dev_infra/generic
slc1001nap:/vol/local/x86/redhat/50_prod/packages
1.1T 1023G 58G 95% /usr/local/remote/packages
slc1001nap:/vol/local/linux/redhat/packages
1.1T 1023G 58G 95% /usr/local/redhat/packages

Hi,
Are you using the the all-in-one installer or the one which includes WLS as well. Do you face similar issues when installing Eclipse JEE package ?
thanks
Raj

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

An error during the installation of OS X !!

During the installation of OS X maverick an error occurred pointing that my Macintosh disk is damaged and can't be repaired !! The installation is not being continued and I can't go back to my old version !! However The only available choices are disk utility, terminal, firmware password utility and restore....
Please tell me what to do to at least get the important files from my disk because I never backed up :(

Select Disk Utility and try repairing the disk and disk permissions.
Do yo have access to another Mac and and external HD? If so connect your MBP to the other Mac with a Firewire cable and boot the MBP into Target Disk Mode, Transferring files between two computers using FireWire.
The other Mac will see the MBP as an external HD where you can copy your Home folder to the external HD which should be formatted OS X Extended (journaled). If you have 3rd party apps copy them also to the EHD.
Now with your files safely backed up you can go about trying to getting the MBP's drive backup and running or replaced if that's what is called for.
OT

Root.sh fails on second node during clusterware installation

I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...

Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html

When i download itune then An error occurred during the installation of assembly 'Microsoft CRT.version="8.0.50727.4053".type="win32".publicKey Token="1fc8b9a1e18e3b".processorArchitecture="x86"'.Please refer to help Suppport for more information.

when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.

Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors.

During the installation of grid infra(cluster) for Oracle 11.2 RAC one.

Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...

Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

No disk choices shown during guest installation

Similar Messages

Maybe you are looking for