No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

Similar Messages

  • I have the exclamation point symbol next to podcasts that don't meet the criteria for said symbol based on the FAQ

    When I'm looking through and trying to manage my Podcast library within iTunes, I see the exclamation point symbol next to several. My first issue is the fact that there are many that have this symbol that I only wanted a few episodes and not a subscription. How can I fix this problem?
    My second issue is that for many of the podcasts with the exclamation point symbol, they don't fit the criteria based on what's in the Symbol FAQ, which states that there are too many unplayed episodes so new episodes won't download. For the podcasts in question, this is not the case, as all episodes have been listened to. What can be done to fix this problem?
    My third issue is the fact that when I DO play a podcast on my iPod Touch (4th Gen), I don't use the app (can't stand it), then go to sync it with the computer, these episodes are shown as having already been played PRIOR to the actual syncing happening. So, when I go to do the ACTUAL sync, the play count is off. Right now, I have to manually reset the play count so that the episodes that I listened to on my iPod Touch only show one play in the library count, not two or in some cases, three. How can I fix this problem?
    I have the most current version of iTunes and use Windows 7 64-bit.
    Thanks for ANY help!

    Try this Support Article  >  http://support.apple.com/kb/HT1808

  • Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

    Hi there
    I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
    Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
    No Disks that meet the Criteria in the solaris installer documentation
    Your help will be appreciated
    Thanks

    Hi
    I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
    Please Check the system or try another installation option
    then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
    but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
    Thanks for your help
    Roushdy

  • Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update?

    Hello everyone,
    I just purchased MBP 2.6 Ghz running Lion 10.7.3 and I am trying to install the Combo Update 10.7.4.
    After I launch the installer at the Destination Select step I get this message:
    Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirement for this update.
    The sharing and permission on Macintosh HD are "Read & Write" for system, wheel and everyone.
    Please Help
    Thanks

    Welcome to Apple Communities
    If it's a new MacBook Pro (2012), you have to update in  > Software Update. They need a special version

  • HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

    I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update.   Expect it's due to being at 10.9.1.  Mail is still teetering between dysfunctional and non-functional.  Advice?

    I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
    If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
    I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

  • How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

    Hello,
    It may sound too easy to someone but I need to ask it anyway.
    I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
    The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
    I believe that you will understand the manner and help me on choosing proper way.
    Thank you.

    Hi,
    You have 2 Storage H/W.
    You will need to configure a Quorum ASMDisk to store a Voting Disk.
    Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
    You must have the odd number of voting disk (i.e 1,3 or 5)  one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
    (e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
    If fail the storage that hold the major number of  Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
    It will happen:
    https://forums.oracle.com/message/9681811#9681811
    You must configure your Clusterware same as RAC extended
    Check this link:
    http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
    Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

  • How to get the free space from logical drive for solaris installation?

    Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

    Hi,
    See: http://www.sun.com/software/solaris/self_help.jsp
    At the bottom of that page, FAQ # 3
    HTH,
    John

  • Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

    I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
    thanks

    That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements.   A common phenomena.  If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App.  That's one possibility for the error message appearing.  If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview.  You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
    Hope this helps

  • OS X update (10.9.4) can't be installed on this disk This volume does not meet the requirements for this update.

    I have the mac with following specs I need to update the OS X 10.9.4. I tried OS X Mavericks 10.9.4 Update to install manually but it says "OS X update can't be installed on this disk This volume does not meet the requirements for this update." Please help me.

    Click here and run the combo updater. The one you previously downloaded requires 10.9.3.
    (111238)

  • Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

  • OS X 10.8.1 update cannot be installed on this disk. This volume does not meet the requirements for this update.

    HI
    I had installed mountain lion on my MBP 13" early 2012, but it has lots of issue, when i tryed to up date to 10.8.1 it shows the error "OS X update cannot be installed on this disk. This volume does not meet the requirements for this update"
    if i run the software update nothis is showing, current os version is 10.8

    This did not work for me.
    Note, that at one point the Apple developer knew exactly what the problem was and decided not to let us know. If we were tole what the problem was we woud have an idea of how to proceed.

  • HT1338 OS X Update can't be installed on this disk. This volume does not meet the requirements for this update.

    I am trying to update Mountain Lion to 10.8.2, but I get the error message:
    OS X Update can't be installed on this disk. This volume does not meet the requirements for this update.
    When trying to install on my hard drive?

    Welcome to the Apple Support Communities
    If you have the Late 2012 Mac mini, it requires a special OS X update that it's not available. Wait until Apple releases this update

  • Drives do not meet the requirements for Safari 4.0.5

    I have an original Power MAc G5 with daul 2 GHz processor running 10.5.8. I am currently running Safari 4.0.3 and would like to upgrade to 4.0.5, but the installation package stated that none of my drives meet the requirements for installation. What are the requirements for installation, my startup drive has over 100GB of free space.

    Ok..
    Try repairing disk permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Hard drive "does not meet the requirements" for system updates

    Hi,
    I'm running 10.2 and I'm trying to update my computer to the more recent version, except that I've gone through the update downloads on this site and anything higher than 10.3 tell me I need to run 10.3 to run it. When I tried to upgrade to 10.3, I was told that I "cannot install this software on this disk. This volume does not meet the requirements for this update". What does that mean and how do I rectify the problem? Thank you very much in advance.
    - Jen

    Hi Kappy! I have a similar problem: I had a problem in the past and had to re-install the system. I now have a previous sytem folder on my mac which I do not dare touch. I used to have a later version than 10.3.3 (I cannot remember which). I am now trying to update with the 10.3.9 combo update (just bought a new ipod) and I get the famous "does not meet the requirements" message. I have repaired permissions and done Onyx maintenance - still nothing. I wonder whether somehow the installer detects that there is already some newer component installed and does not want to re-install. I am awfully frustrated... Thanks in advance for your help.

  • 10.5.7 This volume does not meet the requirements for this update.

    First, 10.5.7 is not showing up in software update. I downloaded both the delta and combo 10.5.7 updates and they both give me "This volume does not meet the requirements for this update." I've done all the requisite stuff, permissions, volume check, reset PRAM, etc. I've downloaded the updates several times, and they worked on my 2008 iMac and 2007 Macbook Pro, so I know they work. I've searched and searched and can't find a resolution. It's as if there is some signature written to my boot volume that is preventing this update. Applecare was of no help either. Any ideas?

    Hi! Im new to this forum and i really dont know if this is the right place for me to say this but i really need some help! I have a MAc OS x 10.5.7 and had bootcamp installed on it so i could run both windows and mac! Over the last few days ive recieved a trojan virus on my windows... so i deleted my partition on mac so i basically just had Mac... now i am trying to reinstall my partition but disk utility is saying that i have an invalid volume free block count as it should be 41189365 instead of 41182017....argh! ive read the help stuff on it and it suggests me removing everything off my mac... but will i need 2 still have the mac install disc 1 to hand? as i have currently misplaced this and im ripping my hair out! Ive never had problems with my Imac until now and im really worried! I could really do with the help! Thanks Sam

Maybe you are looking for

  • Assigning a new tax key for V0 and VAT not possible

    Hi Experts, Invoice is been created successfully in SUS , XML transfered to XI which in turn created the IDOC in ECC. I get the below error while transferring theinvoice IDOC from XI to ECC. Assigning a new tax key for V0 and VAT not possible Message

  • Compressor 2 what works for me

    I've had my nightmares with compressor 2 and FCP5 on my Quad G5 and finally found a combo that works . I use compressor only to compress the audio to AC3 format. Using it to compress video results in failure with a Quicktime error of zero. So, I expo

  • (Urgent) Sorting search help values in Web Report

    Hello Friends, We have a web report which uses a variable made on 0CALMONTH. The order of display of values for this variable search help is 02/2004, 03/2004, 01/2005, 07/2006, 08/2006, 05/2007. In this order we have the latest date (05/2007) display

  • Wait (ms) - NI KnowledgeBase article example

    I am reading http://digital.ni.com/public.nsf/allkb/12B2EA9AD5B265AD86256257004DD8E2 which is suppose to explain the difference between the Wait (ms) function and the Wait Until Next ms function. I am having a hard time understanding the example give

  • Problems with servlets.

    hi all. i've installed the tomcat 5.5.15 on a windows xp. the servlet examples provided with the tomcat works great but when i try to add a servlet of my own it won't run it.. here's what i get: HTTP Status 404 - /test/ type Status report message /te