No disk was found in the drive

Trying to burn a dual layer project using verbatim DVD+R DL (which has worked before on this computer) and getting this error:
No disk was found in the drive. Please insert acceptable recordable media.
PowerBook 1.33GHz Mac OS X (10.3.9) DVDSP 4

http://discussions.apple.com/search.jspa?threadID=&q=memorex&objID=&dateRange=al l&userID=David+Harbsmeier&numResults=15&rankBy=10001

Similar Messages

The Volume Disk was found corrupt and needs to be repaired.

The Volume Disk was found corrupt and needs to be repaired.How can i fix this problem.

AHT will not scan for or find bad disk drive sector blocks, it might tell you your SATA chip.... no it won't do that either.... <g>
In a perfect universe Disk Utility First Aid, run from another hard drive ideally, or lacking that run from DVD. The shift key is suppose to check the drive journal and directory for out of sync errors and delete and rebuild extension and other system caches.
But you might want to backup first, and you could install OS X on another drive for one thing, or try using Disk Utility : Restore tab to make a full system copy of everything to another hard drive.
Why not jus point to "Disk Utility startup"
http://support.apple.com/kb/TS1417

A conflicting local user account as indicated was found on the identified nodes Oracle 12c GRID runclufy check

Dear Team,
Oracle 12c GRID Runclufy check failing with below error. Even After Changing Local Built in Administrator User Name also same failure reporting. Kindly help to resolve this Issue and Provide steps to Avoid this conflict.
Windows user account consistency check across nodes - Checks consistency of Windows user account across nodes Error:
PRVG-11818 : Windows user "MDCCOMMONLDAP\Administrator" is a domain user but a conflicting local user account was found on nodes "sep03vvm-401,sep03vvm-402" -
Cause: A conflicting local user account as indicated was found on the identified nodes. - Action: Ensure that the Windows user account used for Oracle installation and configuration is defined as a domain user on all nodes or as a local user on all nodes, but not a mixture of the two.
Check Failed on Nodes: [sep03vvm-402, sep03vvm-401]
c:\Oracle12c_software\Oracle12c_grid\grid>runcluvfy.bat stage -pre crsinst -verbose -n SEP03VVM-401,SEP03VVM-402
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sep03vvm-401"
Destination Node                      Reachable?
sep03vvm-401                          yes
sep03vvm-402                          yes
Result: Node reachability check passed from node "sep03vvm-401"
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name                             Status
sep03vvm-402                          passed
sep03vvm-401                          passed
Result: User equivalence check passed for user "Administrator"
Checking node connectivity...
Interface information for node "sep03vvm-402"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Addre
ss        MTU
PublicLAN 153.71.45.202   153.71.45.0     On-link         153.71.45.254   00:50
:56:91:05:30 1500
PrivateLAN 10.10.10.15     10.10.10.0      On-link         153.71.45.254   00:5
0:56:91:75:1B 1500
6TO4 Adapter 2002:9947:2dca::9947:2dca 2002::
        00:00:00:00:00:00 1280
Interface information for node "sep03vvm-401"
Name   IP Address      Subnet          Gateway         Def. Gateway    HW Addre
ss        MTU
PublicLAN 153.71.45.201   153.71.45.0     On-link         153.71.45.254   00:50
:56:91:56:B6 1500
PrivateLAN 10.10.10.14     10.10.10.0      On-link         153.71.45.254   00:5
0:56:91:60:99 1500
6TO4 Adapter 2002:9947:2dc9::9947:2dc9 2002::
        00:00:00:00:00:00 1280
Check: Node connectivity of subnet "153.71.45.0"
Source                          Destination                     Connected?
sep03vvm-402[153.71.45.202]     sep03vvm-401[153.71.45.201]     yes
Result: Node connectivity passed for subnet "153.71.45.0" with node(s) sep03vvm-
402,sep03vvm-401
Check: TCP connectivity of subnet "153.71.45.0"
Source                          Destination                     Connected?
sep03vvm-402 : 153.71.45.202    sep03vvm-402 : 153.71.45.202    passed
sep03vvm-401 : 153.71.45.201    sep03vvm-402 : 153.71.45.202    passed
sep03vvm-402 : 153.71.45.202    sep03vvm-401 : 153.71.45.201    passed
sep03vvm-401 : 153.71.45.201    sep03vvm-401 : 153.71.45.201    passed
Result: TCP connectivity check passed for subnet "153.71.45.0"
Check: Node connectivity of subnet "10.10.10.0"
Source                          Destination                     Connected?
sep03vvm-402[10.10.10.15]       sep03vvm-401[10.10.10.14]       yes
Result: Node connectivity passed for subnet "10.10.10.0" with node(s) sep03vvm-4
02,sep03vvm-401
Check: TCP connectivity of subnet "10.10.10.0"
Source                          Destination                     Connected?
sep03vvm-402 : 10.10.10.15      sep03vvm-402 : 10.10.10.15      passed
sep03vvm-401 : 10.10.10.14      sep03vvm-402 : 10.10.10.15      passed
sep03vvm-402 : 10.10.10.15      sep03vvm-401 : 10.10.10.14      passed
sep03vvm-401 : 10.10.10.14      sep03vvm-401 : 10.10.10.14      passed
Result: TCP connectivity check passed for subnet "10.10.10.0"
Check: Node connectivity of subnet "2002::"
Source                          Destination                     Connected?
sep03vvm-402[2002:9947:2dca::9947:2dca] sep03vvm-401[2002:9947:2dc9::9947:2dc
9] yes
Result: Node connectivity passed for subnet "2002::" with node(s) sep03vvm-402,s
ep03vvm-401
Check: TCP connectivity of subnet "2002::"
Source                          Destination                     Connected?
sep03vvm-402 : 2002:9947:2dca::9947:2dca sep03vvm-402 : 2002:9947:2dca::9947:
2dca passed
sep03vvm-401 : 2002:9947:2dc9::9947:2dc9 sep03vvm-402 : 2002:9947:2dca::9947:
2dca passed
sep03vvm-402 : 2002:9947:2dca::9947:2dca sep03vvm-401 : 2002:9947:2dc9::9947:
2dc9 passed
sep03vvm-401 : 2002:9947:2dc9::9947:2dc9 sep03vvm-401 : 2002:9947:2dc9::9947:
2dc9 passed
Result: TCP connectivity check passed for subnet "2002::"
Interfaces found on subnet "153.71.45.0" that are likely candidates for VIP are:
sep03vvm-402 PublicLAN:153.71.45.202
sep03vvm-401 PublicLAN:153.71.45.201
Interfaces found on subnet "2002::" that are likely candidates for VIP are:
sep03vvm-402 6TO4 Adapter:2002:9947:2dca::9947:2dca
sep03vvm-401 6TO4 Adapter:2002:9947:2dc9::9947:2dc9
Interfaces found on subnet "10.10.10.0" that are likely candidates for a private
interconnect are:
sep03vvm-402 PrivateLAN:10.10.10.15
sep03vvm-401 PrivateLAN:10.10.10.14
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "153.71.45.0".
Subnet mask consistency check passed for subnet "10.10.10.0".
Subnet mask consistency check passed for subnet "2002::".
Subnet mask consistency check passed.
Result: Node connectivity check passed
Checking multicast communication...
Checking subnet "153.71.45.0" for multicast communication with multicast group "
224.0.0.251"...
Check of subnet "153.71.45.0" for multicast communication with multicast group "
224.0.0.251" passed.
Check of multicast communication passed.
Checking the status of Windows firewall
Node Name     Enabled?                  Comment
sep03vvm-402 no                        passed
sep03vvm-401 no                        passed
Result: Windows firewall verification check passed
Check: Total memory
Node Name     Available                 Required                  Status
sep03vvm-402 4.9996GB (5242420.0KB)    4GB (4194304.0KB)         passed
sep03vvm-401 4.9996GB (5242420.0KB)    4GB (4194304.0KB)         passed
Result: Total memory check passed
Check: Available memory
Node Name     Available                 Required                  Status
sep03vvm-402 3.6612GB (3839028.0KB)    50MB (51200.0KB)          passed
sep03vvm-401 3.3152GB (3476244.0KB)    50MB (51200.0KB)          passed
Result: Available memory check passed
Check: Swap space
Node Name     Available                 Required                  Status
sep03vvm-402 5.8121GB (6094388.0KB)    4.9996GB (5242420.0KB)    passed
sep03vvm-401 5.8121GB (6094388.0KB)    4.9996GB (5242420.0KB)    passed
Result: Swap space check passed
Check: Free disk space for "sep03vvm-402:C:\Windows\temp"
Path              Node Name     Mount point   Available     Required      Stat
us
C:\Windows\temp   sep03vvm-402 C             82.6484GB     1GB           pass
ed
Result: Free disk space check passed for "sep03vvm-402:C:\Windows\temp"
Check: Free disk space for "sep03vvm-401:C:\Windows\temp"
Path              Node Name     Mount point   Available     Required      Stat
us
C:\Windows\temp   sep03vvm-401 C             82.6112GB     1GB           pass
ed
Result: Free disk space check passed for "sep03vvm-401:C:\Windows\temp"
Check: System architecture
Node Name     Available                 Required                  Status
sep03vvm-402 64-bit                    64-bit                    passed
sep03vvm-401 64-bit                    64-bit                    passed
Result: System architecture check passed
Checking length of value of environment variable "PATH"
Check: Length of value of environment variable "PATH"
Node Name         Set?          Maximum Length Actual Length Comment
sep03vvm-402      yes           5119          100           passed
sep03vvm-401      yes           5119          129           passed
Result: Check for length of value of environment variable "PATH" passed.
Checking availability of ports "6200,6100" required for component "Oracle Notifi
cation Service (ONS)"
Node Name         Port Number   Protocol      Available     Status
sep03vvm-402      6200          TCP           yes           successful
sep03vvm-401      6200          TCP           yes           successful
sep03vvm-402      6100          TCP           yes           successful
sep03vvm-401      6100          TCP           yes           successful
Result: Port availability check passed for ports "6200,6100"
Starting Clock synchronization checks using Network Time Protocol(NTP)...
Checking daemon liveness...
Check: Liveness for "W32Time"
Node Name                             Running?
sep03vvm-402                          yes
sep03vvm-401                          yes
Result: Liveness check passed for "W32Time"
Check for NTP daemon or service alive passed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking if current user is a domain user...
Check: If user "Administrator" is a domain user
Result: User "MDCCOMMONLDAP\Administrator" is a part of the domain "MDCCOMMONLDA
P"
Check: Time zone consistency
Result: Time zone consistency check passed
Checking for status of Automount feature
Node Name     Enabled?                  Comment
sep03vvm-402 yes                       passed
sep03vvm-401 yes                       passed
Result: Check for status of Automount feature passed
Checking consistency of current Windows user account across all nodes
PRVG-11818 : Windows user "MDCCOMMONLDAP\Administrator" is a domain user but a c
conflicting local user account was found on nodes "sep03vvm-402"
Result: Check for Windows user account "MDCCOMMONLDAP\Administrator" consistency
failed
Pre-check for cluster services setup was unsuccessful.
Checks did not pass for the following node(s):
        sep03vvm-402

SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
   CAUSE: Failed to access the temporary location.
   ACTION: Ensure that the current user has required permissions to access the temporary location.
Are you using a supported OS version (listed in the Install Doc) and following all of the steps in the Install Doc ?
HTH
Srini

Error -2002: a bad public movie atom was found in the movie

I have a Nikon Coolpix L10 (about 2 years old) that records video in the .mov format.
Most of the time when I play the videos on my computer I used to get a bad flicker and the video would often freeze. When I used a video editing program I found that for every two frames of video there was a black frame.
So I thought maybe Quicktime wasn't 100% compatible with the file type or version. So after some deliberation I got Quicktime Pro and I have the newest version 7.6.5. The flicker is gone but the video still freezes.
So I tried exporting to MP4 or AVI or anything and I keep getting
"Error -2002: a bad public movie atom was found in the movie"
It wont allow me to export the video to a different format.
Sometimes when I cancel the export Windows pops up a screen that it's searching for a reason that the Export Controller stopped working.

Thank you very much for the help. I tried copying and pasting the video file that is a .mov file to my zip drive and then I tried to an .avi file. The reason for doing this is so I can edit it with microsofts windows movie maker. After I had it on the zip drive and tried to export it so I could change the file it still defaults to the error 2002 message saying there is a bad public movie atom. I have done a bunch (5) other movies from the camera and they all worked and then the last one would not. So I assume there is a random factor that happens such as file size or something in the recording that causes the random atom attack. Maybe the difference is not being a mp4. It would be great if there was a definitiion of what bad public atom was and what it meant. Computers and technology is great.
I did another search and found that a person commented on zipping the file. Well I tried to zip it from the external drive I have to my desktop and it would not work. Then I ziped the file again. Saved to a external drive then unziped it to the same external drive. From that file I then did the file export and it went fine. So the moral of the story is if the video you took is important keep searching and trying and thanks for everyones help. Why is it the vendor of the product does not post solutions? Anyway now I can go on making movies and editing them. It must be a file corruption issue so that by moving the 1's and 0's around it fixes it's self. Is it a bug with the camera recording or is a bug with quick time?

Installation wizard prompts for the installation disk--though the disk is already in the drive

I cannot get past the install wizard, which prompts me to install the disk, even though the disk is already in the drive. The install wizard gets to the point of calculation installation time, them prompts me to install the disk, which is already in the drive bay. I click Continue, I even eject the disk and replace it in the drive, and it just keeps prompting for me to install it. I eventually cancel the install, and the errors copied below are reported:
- 0 fatal error(s), 27 error(s), 0 warning(s)
ERROR: DW001: Set payload cancelled status
ERROR: DW049: Payload {0094FC04-A548-4D8F-87C1-140431F76C2E} has an action "install" but no resultState
ERROR: DW049: Payload {0215A652-E081-4B09-9333-DC85AAB67FFA} has an action "install" but no resultState
ERROR: DW049: Payload {033E378E-6AD3-4AD5-BDEB-CBD69B31046C} has an action "install" but no resultState
ERROR: DW049: Payload {35ED8892-98E5-488A-A23C-6DB842A46EA5} has an action "install" but no resultState
ERROR: DW049: Payload {4058E728-84D8-45CE-8E2D-5F35BD6659A1} has an action "install" but no resultState
ERROR: DW049: Payload {49E6D00F-3456-11E0-AE83-842B2B67A8CC} has an action "install" but no resultState
ERROR: DW049: Payload {635FED5B-2C6D-49BE-87E6-7A6FCD22BC5A} has an action "install" but no resultState
ERROR: DW049: Payload {6C7D437A-D2E9-4FE9-A4D9-A6329860835C} has an action "install" but no resultState
ERROR: DW049: Payload {71BC8278-815D-4F8C-8FA5-C6F782C73892} has an action "install" but no resultState
ERROR: DW049: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} has an action "install" but no resultState
ERROR: DW049: Payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} has an action "install" but no resultState
ERROR: DW049: Payload {9416FE9E-345E-11E0-BC42-0024E8692489} has an action "install" but no resultState
ERROR: DW049: Payload {B6D38690-755E-4F40-A35A-23F8BC2B86AC} has an action "install" but no resultState
ERROR: DW049: Payload {BD85DFD4-005F-4219-8E27-C922CC4D8A61} has an action "install" but no resultState
ERROR: DW049: Payload {CBBBB5DB-8EF3-40D7-A9FE-5A69100C1EED} has an action "install" but no resultState
ERROR: DW049: Payload {D0C50427-0E90-4821-91F3-D9476235901F} has an action "install" but no resultState
ERROR: DW049: Payload {D1A19B02-817E-4296-A45B-07853FD74D57} has an action "install" but no resultState
ERROR: DW049: Payload {D1B83970-7269-48BE-8B0E-5120D9327E52} has an action "install" but no resultState
ERROR: DW049: Payload {D92BBB52-82FF-42ED-8A3C-4E062F944AB7} has an action "install" but no resultState
ERROR: DW049: Payload {DD18D60C-87B1-47D9-8312-67508B402FB9} has an action "install" but no resultState
ERROR: DW049: Payload {E5DD149F-8370-48F9-A32C-2E3DC776CFFB} has an action "install" but no resultState
ERROR: DW049: Payload {ED28819E-310F-4F17-925C-C69B0A1C1F7F} has an action "install" but no resultState
ERROR: DW049: Payload {F37EA9EC-638F-4E61-BED4-BDB10461D73B} has an action "install" but no resultState
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft_VC90_CRT_x86: User cancelled installation

It appears you are using some form of Windows which version do you have? What are you trying to install? Have you tried download and running the Adobe Support Advisor?

Cannot add video - "Error 2002: a bad public atom was found in the movie"

Okay, I've searched around and cannot find anything that works, this is driving me crazy! I converted a file from .avi to .mp4 and am now trying to add it to iTunes so that I can put it on my iPod Touch. When I try to add the file, whether by dragging and dropping the file into itunes or going through the File menu, nothing happens - no error messages, no notifications, nothing. If I try to open the file in Quicktime I get the "Error 2002: a bad public atom was found in the movie" message.
I've tried editing the tags with Tagger, tried the AoA MP4 patch, tried moving the file to a flash drive and adding from there, tried running iTunes in XP compatibility mode... all with no effect. Please, is there anyone that knows how to fix this?

Hello,
This doesn't really solve the problem, but why don't you ask your colleague to resave or export test.3gp?
The new file will probably work. (vs troubleshooting your Windows PC can take ages, to no avail)

Org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x80) was found in the CDATA section

          Hi,
          I,'m using c.tld tag libraries from Yakarta in order to use c:if functions.
          When I use non-unicode characters in my JSP pages, it crashes:
          java.io.IOException: javax.servlet.jsp.JspException: The taglib validator rejected
          the page: "org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x80)
          was found in the CDATA section., "
               at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:124)
               at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:258)
               at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:353)
               at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:211)
               at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:149)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:521)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:351)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
               at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
          How can I force it to use ISO-8859-1? All my tries haven't work. What should I
          do? The c.tld libraries and jars are taken from JDK 1.4.1_02


Hi Stefan,
   This is my source xml in moni..
xmlns:prx="urn:sap.com:proxy:ECP:/1SAI/TAS5BFDF495190544E4B506:701:2008/06/06">
<SiteId>0080</SiteId>
<UCC>42027519 91029010015</UCC>
My interface is SAP(Proxy) to Database(Synchronous).
   SAP (PROXY) --> PI --> DATABASE ( Synchronous Communication )
Let me know if u need any information from my side...
Thanks for ur help...
Thanks,
Siva..

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

Yes it is the right Disc...
2Z691-6040-A (OEM) Drop-in DVD...
System Requirements  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
Compatibility  eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
http://www.welovemacs.com/2z6916040a.html
I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

In Disk 0 one of the drive is not showing in Explorer and only have "Delete Volume" option is available in Disk Management.

Hi,
In Disk 0 and I am unable access one of the
drive and unable to assign a drive letter to it. I've gone through the MMC for disk management but the only option i get is
Delete Volume or Help. The disk management states that the drive is
Primary and Healthy. (OS: Windows 7)
the link contains the snapshot of the disk:
https://drive.google.com/file/d/0B0qM-ZNW10W_Y1czdTFDampOZ0U/view?usp=sharing
Please help, as I have important data on that drive.
thanks!

there is no drive letter assigned to it so how to run Chkdsk for that 19 GB drive.
Hi,
please use the diskpart utility, list volume\list partition to find more information about the disk
Ref:
http://technet.microsoft.com/en-us/library/cc770877.aspx
And I also suggest you use last known good configuration and check the result:
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-7
Yolanda Zhu
TechNet Community Support

More than one X.509 certificate was found with the specified parameters

Greetings All,
We are getting an error in our application event logs every minute or so and it seems to be causing search queries to fail. Same error is appearing in the ULS logs.
System
Provider
Name]
System.ServiceModel
4.0.0.0
EventID
3
Qualifiers]
49154
Level
2
Task
5
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-06-25T02:30:12.000000000Z
EventRecordID
92894
Channel
Application
Computer
Security
UserID]
EventData
System.ServiceModel.ServiceHostingEnvironment+HostingManager/63835064
System.ServiceModel.ServiceActivationException:
The service '/0c98374520dc4b748d92a1e51b365dce/SearchService.svc' cannot be
activated due to an exception during compilation. The exception message is: More
than one X.509 certificate was found with the specified parameters.. --->
System.ArgumentException: More than one X.509 certificate was found with the
specified parameters. at
Microsoft.SharePoint.Utilities.CertificateManager.GetCertificate(String
storeName, StoreLocation storeLocation, X509FindType findType, Object findValue)
at
Microsoft.SharePoint.Administration.SPIisWebServiceSettings.get_LocalSslCertificate()
at Microsoft.SharePoint.SPServiceHostOperations.Configure(ServiceHostBase
serviceHost, SPServiceAuthenticationMode authenticationMode) at
Microsoft.Office.Server.Search.Administration.SearchServiceHostFactory.CreateServiceHost(String
constructorString, Uri[] baseAddresses) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo
serviceActivationInfo, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner
exception stack trace --- at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String
relativeVirtualPath, EventTraceActivity
eventTraceActivity)
w3wp
6328
Doesn't appear to affect the component health status or the crawling process, only the return of search results.
Sorry, something went wrong.
Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
I checked the certificates snapin, didn't see anything out of the ordinary but I have a feeling it goes deeper than that.
Where can I remove this duplicate certificate? Thanks!

Open IIS and check server certificates
Check if there is any certificate applied to Security token service
Did you used any certificate for web application in site
Check binding of all web application in IIS
Try to browse
servername/0c98374520dc4b748d92a1e51b365dce/SearchService.svc from all servers, check the certificate details
If this helped you resolve your issue, please mark it Answered

'An invalid public movie atom was found in the movie' Error Message

I was just tidying up all the music in iTunes and came across an album that half the songs are unplayable... I get no action with iTunes. I tried opening one of them with Quicktime and I get the following message:
An invalid public movie atom was found in the movie
I wonder if there might be a fix. I have the original CD at home but I am traveling and won't be back for a few months...
Thanks!

I tried to play video clips on from lynda.com and the Q appears but only the audio plays.I am new to Mac and have no idea what to do. The same clips play on my windows pc just fine and that is version 7.3.

Openshot + Blender: No frame was found in the Output from Blender

Can't get this to work. Anyone know why?
Using OpenShot version 1.4.0
blender -v
Blender 2.61 (sub 0)
build date: 2012-01-05
build time: 10:31:02
build revision: unknown
build platform: Linux
build type: Release
build c flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wcast-align -Werror=declaration-after-statement -Werror=implicit-function-declaration -Werror=return-type -Wstrict-prototypes -Wno-char-subscripts -Wno-unknown-pragmas -Wpointer-arith -Wunused-parameter -Wwrite-strings -Wno-error=unused-but-set-variable
build c++ flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -D__STDC_CONSTANT_MACROS -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wno-invalid-offsetof -Wno-sign-compare
build link flags: -pthread
build system: CMake
Blender command: blender -b '/usr/lib/python2.7/site-packages/openshot/blender/blend/blur.blend' -P '/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py'
Traceback (most recent call last):
File "/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py", line 150, in <module>
bpy.context.scene.render.file_format = params["file_format"]
AttributeError: 'RenderSettings' object has no attribute 'file_format'
No frame was found in the output from Blender
Blender render thread finished
Last edited by whoops (2012-01-22 09:47:37)

yes, that is correct that it crashes with the new code when i have both made it a separate library function node and when i incorporated it into an existing code. the odd thing is that it actually seems to work now. i believe that i was using the wrong environment to call the new codes, which is why whenever i tried to revert to the original code previously, it still crashed. it seems that in order to be called, i need to use Deployment rather than Development and ppc instead of i386 in the active configuration and architecture in Xcode, respectively. while playing around with the iphone app, it must have reset my defaults to a non-labview friendly form. so now that i've got that part of the code working, i need to find out why it's still crashing on me. at first, i thought it must be the random number generator, but testing that separately in the code works just fine, so there must be something internal in the code. probably a memory allocation fault. but now that i can actually get everything running once more, i should be able to sort that issue out myself.
thank you very much for the help. sorry i didn't actually have anything to fix, unfortunately. i'm going to spend some time trying to debug this section of code to find where the fault lays. i may come back if i cannot find it in there, but hopefully it will not come to that.
take care and many thanks,
justin

InsertPage RaiseError: An incorrect structure was found in the PDF file

Hi,
I am trying to build a button script that will create a new document, copy (insert) from the first page of the open document, save it, then close it. I believe the part where it gets tricky -- and possibly not doable -- is that the original (source) document uses a template; full of form fields to possibly be spawned off as new pages.
Given the above, ideally the user of the form can click on the "save new page" button: it creates anj Inserted copy of the first form page, cleared of content if any has been entered, and not including any other pages that may have been spawned.
With the code I am using, it currently creates the copy of the page and it inserts it as the zeroeth page (ahead of a blank page I intend to add code later to delete) and saves it. However, there are a couple of problems that come up with this. First is the error code that opens in the debugger:
RaiseError: An incorrect structure was found in the PDF file
Doc.insertPages:29:AcroForm:Save New Form:Annot1:MouseUp:Action1
===> An incorrect structure was found in the PDF file
Despite the error it does still save the page (form copy) as mentioned above. However, if you try to start working with it, it lets you know that there are no form fields on the document (even though they are all there and seemingly functional).   When I look to edit the fields, it will then ask you if you want to try to recognize the fields. If I click on "yes", it says it was unable to, but then the form opens up with all of the field names perfectly matching the original. If I click on "no" it just opens the page with all of the fields perfectly matching again. So I feel like I am close to being able to do this!
I am using the following code to produce my results:
(In the JavaScript "app" folder, I have the following trusted functions:)
myTrustedMenu = app.trustedFunction(function(name)
    app.beginPriv();
    app.execMenuItem(name);
    app.endPriv();
myTrustedSaveAs = app.trustedFunction(function(doc, namePath)
    app.beginPriv();
    doc.saveAs(namePath);
    app.endPriv();
myTrustedNewDoc = app.trustedFunction(function()
    app.beginPriv();
    var doc = app.newDoc();
    app.endPriv();
    return doc;
myTrustedInsertPage = app.trustedFunction(function(doc, namePath)
    app.beginPriv();
    doc.insertPages ({
        nPage: -1,
        cPath: namePath,
        nStart: 0
    app.endPriv();
(On the "Save New Form" button, the following code is activated:)
// First split document path into an array
var aPathComps = this.path.split("/");
// Get File Name off end of array
var myFileName = aPathComps.pop();
var pathway = aPathComps.join("/");
var myDoc = myTrustedNewDoc();
myTrustedSaveAs(myDoc, pathway + "/test.pdf");
myTrustedInsertPage(myDoc, this.path);
//myDoc.resetForm();
//myDoc.closeDoc(true);
I apologize for the long post and I appreciate anyone who takes the time to look into this issue for me.
Thanks,
Mike

MikeIs2C wrote:
You nailed it TSN! Deleting the tags did the trick. Thank you so much for your help! Just an FYI for any of you fellow "noobs" that might be referencing this discussion, to open the "Tabs" view (in Adobe Acrobat Pro XI in my case) go to View > Show/Hide > Navigation Panels > Tags. I looked all over the place for that until I found a document that mentioned how to open it.
Thanks for pointing out specifically how to get here. Thanks to the all for this post!
I also encountered this error, "An incorrect structure was found in the PDF file" from my published MadCap Flare user guide. I am attempting to find a way to build a bridge between Flare and Google documents for corporate-wide collaboration. Thus far, it's a crazy challenge finding a way to produce gdocs from Flare output. Neither product makes this easy. The closest I can get is by publishing the Flare doc as a PDF... but then I must break that document down into 2mb chucks...which led me to this problem, after attempting to use the Adobe Acrobat splitting tool.
Question:
What is the root cause of these bad tags. There are a LOT of them! Is this a fault in the way MadCap Flare creates a PDF document?
Yes, deleting some of the tags will allow me to finally split a PDF document. Unfortunately, this error occurs in all my published PDF documents, thus preventing me from automating (scripting) this split and then conversion to Google Docs!
Thank you

Incorrect structure was found in the PDF message

I have a folder level javascript that creates a custom menu item which when clicked inserts a page at the end of the open document.
Sometimes when executed, a dialog box appears that says "An incorrect structure was found in the PDF file" but the page is inserted anyway.
We work with a lot of documents that have been scanned as a PDF. However, as I said it only occurs with some documents....
Is it just the way they have been scanned? Or is there an error in my script? Or perhaps another explanation?
Could I suppress that particular alert since the page is inserted anyway?
---edit----
I have just checked the script with Acrobat 7.0 and although I don't get the 'Incorrect structure was found in the PDF' message the javascript debugger appears with this message in the console:'Exception in line 19 of function anonymous, script folder-level:App:InsertSummaryPage.js' but once again the page is still inserted anyway.
Here is the javascript I am using to insert a page:
trustedNewDoc = app.trustedFunction(function ()
app.beginPriv(); // Explicitly raise privilege
this.insertPages({nPage:this.numPages-1, cPath:"/C/Program Files/Adobe/Acrobat 7.0/Acrobat/Javascripts/SummaryPage.pdf"});
app.endPriv();
app.addMenuItem({cName:"Insert Summary Page", cParent:"Tools", cExec:"trustedNewDoc()"});
Thanks

Larry – I did what you said and got the form to comply. I combined all the pages and suffered as the software bombed about every third or fourth move I made. For some reason, the form fields work like they should, but the text never goes into the order you want it to. I was having to move the text to the bottom and it would bomb every time I did. I would launch the software again and it would work for about 5 or 6 moves, but every time I moved the text to its proper place in the order, it bombs the program.
But your suggestion was the correct one.
I did get the message that some of the names were the same and I’ve had that happen before. I’ve gotten better at my naming convention. I’m hooked up to a network here and some times when they are doing whatever they do behind the scenes, I’ve had the software not cooperate or not perform optimally.
Our forms here were all built long ago, and the nature of them is to cram as much info onto a page as you can. It’s not uncommon to have 150 – 200 items per page. This makes compliance a real effort.
Thanks again for all your help.
Rob

An invalid XML character (Unicode: 0x0) was found in the prolog of the docu

Hi folks,
I'm using the SAX parser to parse a small xml file. If I use that file in IE, there its parsing correctly and displaying the xml in the tree structure.
But in my Java code its throwing
org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x0) was found in the prolog of the document.
The xml parsing code of my program is
XMLReader parser = XMLReaderFactory.createXMLReader(
"org.apache.xerces.parsers.SAXParser");
HelpPartHandler hp = new HelpPartHandler();
parser.setContentHandler(hp);
RandomAccessFile raf = new RandomAccessFile("sample.xml","r");
byte Contents[] = new byte[(int)raf.length()];
StringReader sr = new StringReader(new String(Contents));
InputSource is = new InputSource(sr);
parser.parse(is);
The xml file is
<?xml version="1.0"?>
<ROOT>
<NODE> Java </NODE>
</ROOT>
Please let me know the mistakes what I have done. Looking for the reply.
Thanks in Advance
Prabu

The message seems clear to me. Your document contains a null character, which is not valid in an XML document. Take it out of the document, and change whatever produced the document to not put it there. (I hope you don't consider Microsoft software to be standards-compliant.)

No disk was found in the drive

Similar Messages

Maybe you are looking for