No disks found during installation (x86)

Hello,
I'm trying to install Solaris 10 on a x86 home computer. I'm not very familiar with Solaris, only Linux/GNU, Windows (eek) and some MacOS.
When I'm installing I get the "No disks found" error.
I have 2 SCSI disks hooked up with VIA VT8237 chipset (integrated Serial ATA/RAID controller) and the cd-rom (actually a DVD burner) on IDE.
Could someone help me

The "smartii" driver version 2.20 that I found on HP's web site at:
http://h18007.www1.hp.com/support/files/server/us/download/16328.html
contains the following file:
DU/sol_28/i86pc/Tools/Boot/smartii/smartii.itu
I'm a bit surprised that the driver package version mentioned inside
that file is "1.1.1" (and not "2.20"). I'm not sure if this a packaging
error by HP?
Anyway, according to that smartii.itu file, the following PCI devices
are supported by the "smartii" driver:
PCI Vendor / Device / Description
==================================================
0e11 4033     "Compaq Smart Array 3100ES Controller"
0e11 4032     "Compaq Smart Array 3200 Controller"
0e11 4034     "Compaq Smart Array 221 Controller"Can you please check (using the MSDOS "prtpci.exe" utility, or
Linux "lspci -nv") if your compaq raid array controller uses one
of the above three PCI vendor/device ids?

Similar Messages

No disks found during installation

I have the HP Proliant ML 370 G4 server with Smart Array 6400 Controller with 3 Logical drives (RAID1) configured.
And I'm trying to install Solaris 10 on the server.
During an installation proccess (Interactive mode) after "choosing the media from which to install" during the initializing proccess the "No disks found. Check to make sure disks are cabled and powered up. Press Ok to exit" error message appeared.
Is it because of the Solaris 10 have not appropriate driver for Smart Array Controller or what?

The "smartii" driver version 2.20 that I found on HP's web site at:
http://h18007.www1.hp.com/support/files/server/us/download/16328.html
contains the following file:
DU/sol_28/i86pc/Tools/Boot/smartii/smartii.itu
I'm a bit surprised that the driver package version mentioned inside
that file is "1.1.1" (and not "2.20"). I'm not sure if this a packaging
error by HP?
Anyway, according to that smartii.itu file, the following PCI devices
are supported by the "smartii" driver:
PCI Vendor / Device / Description
==================================================
0e11 4033     "Compaq Smart Array 3100ES Controller"
0e11 4032     "Compaq Smart Array 3200 Controller"
0e11 4034     "Compaq Smart Array 221 Controller"Can you please check (using the MSDOS "prtpci.exe" utility, or
Linux "lspci -nv") if your compaq raid array controller uses one
of the above three PCI vendor/device ids?

Error No disks Found during Solaris 10 installation

Hi,
i am trying to install Solaris 10 x86 on an Ml370 server that we bought. during the installation it gives the error No Disks Found. how can i correct this problem?

One question:
Does this server ,ML370 G5, support Solaris in 64 bit mode?
http://www.sun.com/bigadmin/hcl/data/systems/details/1891.html doesn't indicate if it is certified for 64 bits.
and http://h71028.www7.hp.com/enterprise/cache/493913-0-0-0-121.html indicates ony 32 bits.

File not found during installation (WinXP)

Well, I downloaded Oracle 11g for Windows (32 bit) from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html, and, basically, after having had some trouble configuring a new database, I selected the option to (simply) install a database through the wizard. I breezed through the settings, and, ran the installation wizard, however, some files seem not to be available within \win32_11gR2_database_1of2\database, or perhaps my laptop (Amilo Pro 8210) is too slow to be able to read these files.
The errors show up during Setting up Oracle Database 11g 11.2.0.10. The errors showing up within the UI are as follows:
File not found F:\app\Jon\product\11.2.0\dbhome_1\bin\db2gc
File not found F:\app\Jon\product\11.2.0\dbhome_1\oc4j\OC4J_DBConsole\config\system-application.xml
File not found F:\app\Jon\product\11.2.0\db_home_1\oc4j\j2ee\OC4j_DBConsole\config\system-jazn-data.xml
NOTE: It is quite painful that there is no functionality to enable me to upload attachments (e.g. screenshots and log files) because it is very time consuming to copy everything manually, and, it is human nature to get bored typing after a while, so please, Oracle, pimp this profile :~) I did not take exhaustive screenshots, the error log files shows quite a few exceptions as well:
oraInstall2012-06-17_08-09-30PM.err
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
     java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
     java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
     java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup1.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup1.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup20.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup20.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup15.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup15.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup8.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup8.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup11.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup11.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup4.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup4.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup18.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup18.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup14.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup14.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup7.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup7.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup10.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup10.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup17.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup17.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup13.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup13.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup6.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup6.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup2.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup2.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup16.jar (The system cannot find the path specified)
     C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup16.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup9.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup9.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Documents and Settings\Jon\My Documents\Downloads\win32_11gR2_database_1of2\database\stage\Components\oracle.sysman.console.db\11.2.0.1.0\1\DataFiles\filegroup3.jar (The system cannot find the path specified)
NOTE: Due to the message limit of 30000 characters I could not post the log file, nor upload it because no such options is available within
Database Installation I had to chop off parts of the error file as well, patiently highlighting the filenames of the jar files.
oraInstall2012-06-17_08-09-30PM.out
You can find the log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2012-06-17_08-09-30PM.log
Dll to load is C:\DOCUME~1\Jon\LOCALS~1\Temp\OraInstall2012-06-17_08-09-30PM\Win32RunProcesses.dll
Loading psapi.dll from C:\DOCUME~1\Jon\LOCALS~1\Temp\OraInstall2012-06-17_08-09-30PM\psapi.dll
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

>
Your imagination is not limited, my friend. I have already told you that I have unzipped the folders, and, it is not the scope of this forum to have myself insulted in this manner.
Seriously, one expects forum members to be respectful rather than talk garbage about manuals, I was only asking for help, because I thought that files were missing from the installation pack.
I might be your next client for all you know.
>
No offence was intended - it was merely a tongue-in-cheek observation. If you read my previous two replies in this thread, they are courteous to a fault - as are all my posts.
The forums are a volunteer organization - people take time out from their personal and professional lives to help others. Some folks, thankfully a very small minority, use the forums as a free personal support/helpdesk tool to read all the documentation on their behalf and look up or solve things on their behalf. The forums work best when there is real dialogue and exchange of information, rather than monosyllabic answers and mudslinging.
Good luck with your install
HTH
Srini

Trojan found during installation of AW7

This is the first time something like this has happened to me during
software installation.
I'm running ZoneAlarm Extreme Security, which found five trojan variants during Authorware 7 installation:
Trojan.Win32.Krament.ml, associated with Get RTF Object Text Range.exe;
Trojan.Win32.Krament.mn, associated with Insert RTF Object Hot Text interaction.exe;
Trojan.Win32.Krament.mi, associated with Save RTF Object.exe;
Trojan.Win32.Krament.mo, associated with Search RTF Object.exe;
Trojan.Win32.Krament.mh, associated with Show or Hide RTF Object.exe.
I'm sure it is semantics. Any thoughts on this problem? Cures?
Any help is appreciated and thank you in advance for your time and consideration.
Running XP sp3.
Regards

I contacted ZoneAlarm as you recommended and the first thing the support guy said was that it sounded like false positives. He gave me a procedure to follow, which I am going to implement.

\install_fg.jar not found during installation of Developer Suite - urgent!!

I am now installing full developer suite 101202 on Windows machine - DB and SOA suite is up and running already. Well - now I am at screen 'Thank you for choosing Oracle' with Setting up 'Oracle Developer SUite 10g OC4J Instance 10.1.2.0.2'. So - for more than 30 minutes the wizard show the same 94 on progress bar, if I look on installation logs - then they are modified some 25 minutes ago and there is 2 error logs:
...out file contains:
OiilNativeException is thrown
path: C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\jre\1.4.2\bin;.;C:\Windows\system32;C:\Windows;C:\product\10.1.3.1\OracleAS_5\jdk\bin;C:\product\10.1.3.1\OracleAS_5\ant\bin;C:\product\10.1.3.1\OracleAS_5\bin;C:\product\10.1.3.1\OracleAS_3\jdk\bin;C:\product\10.1.3.1\OracleAS_3\ant\bin;C:\product\10.1.3.1\OracleAS_3\bin;C:\oracle\product\10.2.0\db\jlib;C:\oracle\product\10.2.0\db\bin;C:\product\10.1.3.1\OracleAS_4\jdk\bin;C:\product\10.1.3.1\OracleAS_4\ant\bin;C:\oracle\product\10.2.0\db_1\bin;C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;c:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;c:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;c:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;c:\Program Files (x86)\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files (x86)\Hewlett-Packard\IAM\bin;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\product\10.1.3.1\OracleAS_4\MOBILE\sdk\bin
toload is C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\WindowsGPortQueries.dll
OiilNativeException is thrown
toLoad is C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\ocxReg.dll
and ... err file contains:
java.io.FileNotFoundException: C:\Orcl\ds_windows_x86_101202_disk2\stage\Patches\oracle.options.ano.ssl.owm\10.1.0.4.2\1\DataFiles\install_fg.jar (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at oracle.sysman.oii.oiio.oiiof.OiiofFileLoader.fetchDefaultJarToLocal(OiiofFileLoader.java:671)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:120)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
java.io.FileNotFoundException: C:\Orcl\ds_windows_x86_101202_disk2\stage\Patches\oracle.options.ano.ssl.owm\10.1.0.4.2\1\DataFiles\install_fg.jar (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:150)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:123)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
So - what should I do? Installer cann't find file - but it should be there - because the copy-files section of installation wizard was successful... So - if I restart the installation - I cann't see what can be different??? It seems to me that I cann't do nothing now? Is there any solution for this?
Well - I have remained some 6% of setting up and full configuration wizard... How can I complete this??

I have found thread:
http://forums.oracle.com/forums/message.jspa?messageID=2118383#2118383
which is exactly for me - so - can one make some preconfiguration steps? It seems strange, that one should check file by file the installation already prepared and tested by Oracle? I am not sure is this the right practice in production environment... well - and I am not sure if it works at all - it can take much time without result...

WRE53G Unable to Be found during installation

I recently purchased the range expander WRE54G version 3. During the installation process it is able to find my wireless connection just fine, however when it looks for the WRE54G it says it cannot be found. My expander is plugged in and powered. I did everything that the booklet said to do. What is the problem?
Also, what does it mean if the link light is flashing between blue and red? The Activity light stays blue always.
If anyone can help me, that would be great!!

Hi! I'm Engr. Michael, a network engineer from the Philippines. Set this up ok.. connect
your computer to port number 1 of the router.. Range expander to port number 2 and modem to
internet port. and Make sure you're router is unsecured (no security enabled), press and
hold the autoconfig button on your range expander for 10 seconds. wait for the link and
activity lights to be blue. if both of them are blue then the range expander is good to go!
if the activity light is still red, press and hold the reset button (on the range expander)
for 30 seconds, then after 30 seconds unplug the power from the range expander and plug it
back in. wait for the lights to be stable and repeat the process all over again.. You're
only good to go if both lights are blue. Tell me if it works ok? thanks for your time.

Error message "setenv.ini not found" during installation

I want to install the XP Pro version from cd but I get the error message "setenv.ini not found"

Hello
Hmmm... there must be something wrong with recovery disc. What to do now?
You can try to contact your local dealer and see if they can help. Other way, contact nearest Toshiba authorized service provider. If they can confirm that recovery media is not OK they can order new one for you. For free I think.

Solaris8 HCL lists hardware that isn't found during installation

The Solaris8 HCL list video cards 'Diamond Viper V770' and 'Creative Labs 3D Blaster Riva TNT2' cards as being compatible, yet the boot disk (even the latest download) doesn't reference these cards at all. What gives?

My guess, and there were threads back when Intel X25-M came out, it is a firmware compatibility issue. I thought by now and with current new units, it was a think of the past.
I'll let you wade through the links, threads, and tips:
http://www.bing.com/search?q=macbookWindows+7+IntelX25-M
The new firmware fixed my issue.
You should contact Intel support for a fix.
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.intel.com/support/
However, it may not solve.
http://www.pcper.com/article.php?aid=691&type=expert&pid=7
If anything, I would 'move' (ie, clone) OS X to another drive. Catch-22: you need Windows usually to apply any firmware update to SSD (and other devices).
80GB is really small. Especially for an SSD and Windows 7 - over provisioning, garbage collection, etc will make for a tight squeeze. Windows 7 on SSD uses 30GB and then there is page file, hibernation, 9GB for SP1 (due soon), and that is moving temp folders to another (mechanical) drive.
80GB = 72GB user partition and you want to leave 20% free for each OS. OS X needs 20-30GB plus free space as well.
http://en.wikipedia.org/wiki/Solid-state_drive

No Disks Found! error during install of Solaris10 R10 on OracleVM 3.0.1

Has anybody got Solaris 10 R10 working in OracleVM 3.0.1? I have Linux 6.1 and Solaris11 working fine. But get no disks found during iso install of Solaris10 R10.

Still no luck, I get through the installation until it asks about CDROM media, then I get a pop up window with the "No Disks found" eror, after that the install exists to xterm window.
Here's my vm.cfg in this instance I did not change xvd to hd as all my attempts to change this cause vm not to boot.
-thanks for any advise.
memory = 2048
disk = ['file:/OVS/Repositories/0004fb0000030000914c5da5cda46bfc/ISOs/0004fb0000150000cb99f253bbdcfffc.iso,xvda:cdrom,r', 'phy:/dev/mapper/3600144f0e863c90000004e7d4b5f0002,xvdb,w!', 'file:/OVS/Repositories/0004fb0000030000914c5da5cda46bfc/VirtualDisks/0004fb000012000049d780014c3c21d4.img,xvdc,w!']
vif = ['mac=00:21:f6:00:00:04,bridge=192.168.0.0']
usbdevice = 'tablet'
on_crash = 'restart'
OVM_description = ''
name = '0004fb000006000092cffa6918b35871'
builder = 'hvm'
on_poweroff = 'destroy'
boot = 'dc'
uuid = '0004fb00-0006-0000-92cf-fa6918b35871'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Solaris 10'
cpu_cap = 0
OVM_high_availability = True
maxmem = 2048
OVM_simple_name = 'sol10r10'
guest_os_type = 'default'

V440 No Disks Found Error

Hey all,
I have 2 v440 with 2 disks in slot 0 & 1(in each node). I'm attempting to install S10u8, but I'm getting an error saying, "No Disks Found" during the initial install.
On the 1st node I was able to install it on one system, but it only saw c1t1d0 and does not see c0t0d0. I've done devfsadm and no go. I have the latest patches installed as well as the latest OBP and firmware/patch installed.
Also, the system does have the latest firmware-version for the v440 issues.
prtconf -vp | grep 'firmware-version:'
firmware-version: '1.03.11.01'
The 2nd node is the one that is giving me the "No Disks Found" error.
Has anyone experienced this before?

Hello,
On the 1st node I was able to install it on one system, but it only saw c1t1d0 and does not see c0t0d0.
Is this a typo (c0 and c1, should read c0t0d0 and c0t1d0) ? If yes, reseat the disks (as Martin already suggested).
Otherwise do you expect to see some of the internal disks on one controller and the remaining on the other ?
After reviewing the "Matrix of Recognized Device Paths"-InfoDoc, the SCSI backplane is attached to one channel of the SCSI controller. The second channel is the external connector on the back.
*Please post the output of probe-scsi-all or at least confirm that the disks are displayed at the ok-prompt.*
Alterrnatively review the disk status via ALOM, this allows to get the information even on production systems without bringing them down.
Michael
Edited by: MAAL on 21.11.2009 11:03
Removed irelevant contents. The OP hesitated to post the requested additional information.

"ERROR disk not found" during boot cdrom installation

We were booting a T4-4 server from a Solaris 10 boot ISO and command I used was "boot rcdrom - install as nowin" (i was mounting the ISO using the serial redirection window etc, hence the rcdrom)
It worked great asking for the" language to be installed" and "network setting and etc."
then it starts communicating with the jump server to pick up the jumpstart script and etc still working great. but when it start to install, it returned with "ERROR no disk found"
I am sure there are two 600G disk on the server. not sure why it think there is no disk during the installation. googled it and some said something related to raid and i cannot get a conclusion.
{0} ok show-disks
a) /pci@700/pci@1/pci@0/pci@0/LSI,sas@0/disk
b) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
c) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
d) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
e) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
{0} ok devalias
screen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
mouse /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/mouse@1
keyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/keyboard@0
disk7 /pci@700/pci@1/pci@0/pci@0/@0/disk@p3
disk6 /pci@700/pci@1/pci@0/pci@0/@0/disk@p2
disk5 /pci@700/pci@1/pci@0/pci@0/@0/disk@p1
disk4 /pci@700/pci@1/pci@0/pci@0/@0/disk@p0
scsi1 /pci@700/pci@1/pci@0/pci@0/@0
net3 /pci@600/pci@2/pci@0/pci@3/network@0,1
net2 /pci@600/pci@2/pci@0/pci@3/network@0
rcdrom /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0
rkeyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@4/keyboard@0
rscreen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0:r1280x1024x60
net1 /pci@400/pci@1/pci@0/pci@2/network@0,1
net0 /pci@400/pci@1/pci@0/pci@2/network@0
net /pci@400/pci@1/pci@0/pci@2/network@0
disk3 /pci@400/pci@1/pci@0/pci@0/@0/disk@p3
disk2 /pci@400/pci@1/pci@0/pci@0/@0/disk@p2
disk1 /pci@400/pci@1/pci@0/pci@0/@0/disk@p1
disk0 /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
disk /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
scsi0 /pci@400/pci@1/pci@0/pci@0/@0
scsi /pci@400/pci@1/pci@0/pci@0/@0
virtual-console /virtual-devices@100/console@1
name aliases
{0} ok select scsi0
{0} ok show-children
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
f) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk
g) /pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk
h) /iscsi-hba/disk
q) NO SELECTION
{0} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
{0} ok show-volumes
No volumes to show
{0} ok

nothing seems to come up
{0} ok boot rcdrom -s
Boot device: /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0 File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: consconfig: cannot find driver for screen device /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
Booting to milestone "milestone/single-user:default".
Configuring devices.
Using RPC Bootparams for network configuration information.
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Solaris 10 installation gives error "No disk Found"

During the installation of Solaris 10 on dell XPS400, it gives error that says no Disk found:
I have already partitioned by disk in the following manner:
1st partition: 30 GB: NTFS (WIn XP installed)
2nd Partiion: 20 GB: NTFS (data)
3rd Partition: 25GB: RAW
is there any special setting that I need to do for Solaris to detect the hard disk.
Please help!

I do not think you need a driver for the disk.
... you need to reconfigure your system with respect to the DISK CONTROLLER.
Solaris 10 "doesn't do Serial ATA very well".
Search the forum, keyword sata and then read and read and read.
I believe you need to reconfigure something in the PC's BIOS.
However, that may have an impact on how well your current install of WinXP works.
So, I suggest you just go get an additional disk, a conventional IDE drive (not a SATA disk),
and install to that new drive instead.
Then you choose whichever device you want as the boot drive each time you power it on.
... or just go get an older, used computer and dedicate it to operating systems other than Windows. Leave the Dell system alone.
Install... erase ... install something else ... erase ...
etc, etc, etc

Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

How do I get ride of the Microsoft Office Customization Installer Error during installation, Name: file:///c:/Program Files (x86)/Microsoft Visual Studio From: 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
Details:
Name:
From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I repointed this back to my C drive CS5 installed properly.

No disks found during installation (x86)

Similar Messages

Maybe you are looking for