No display from my m8400f PC

My monitor (HPw2207h) will not display anything....the screen is dark, and when I turn on the computer it lightens slightly and then the message "monitor going to sleep" appears. I hooked up the monitor to another computer and it works fine, so I am thinking the issue is with the computer. I also switched the HDMI cable, but that did not help

Sasey, welcome to the forum.
Here is a video driver update for the computer. Install it to see if it solves your problem.
If the driver doesn't solve your problem, here is the Troubleshooting section for the monitor.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

How to drive a 30" Cinema Display from a new 27" iMac?

How do I drive a 30" Cinema Display from a new 27" iMac that has no obvious video out port? There are lots of ports, but nothing resembling or identified as a video out port. Is the very small hole in the cabinet by the power in port the thing I'm looking for? If so, the power/video adapter for the Cinema will not work as is. Do I need a Mini DisplayPort to VGA Adapter? I am completely uncertain about this, and could use solid advice. The AppleCare tech I spoke with today seemed not to have a clue. He said he would get back with me on this. He didn't.

Overview
Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your Mac to a 30-inch display that includes a DVI connector, such as the 30-inch Apple Cinema Display HD, and enjoy the ultimate widescreen canvas with a resolution of 2560 by 1600 pixels.
Compatible only with Mac computers with Mini DisplayPort and Mac OS X v10.5.6 or later.

3 displays from a G5 (is installing 2 graphics cards an option?)

Hi there,
I'm trying to set up 3 displays from my G5 with an ATI Radeon 9600 XT. Ideally two are to be mirrored and one independant. I have two 23" Cinema Displays and a cheap Philips 190CW on which I'm trying to mirror one of the Apples. I bought a 1 x 4 DVI splitter (on ebay from Taiwan) which doesn't seem to work.
My regular 2 monitor set-up which has worked perfectly is to run one Cinema Display from the ADC output on the graphics card via an ADC to DVI converter and the other from the DVI on the card. So I thought I could simply run the DVI output into this splitter and run the extra monitor from one of the outs as well as the second Cinema Display giving me the mirroring on two. But all I get is the ADC connected Cinema Display and one or the other of the DVI connected monitors - not a split.
The splitter is supposed to support 4 monitors at 1920 x 1200 but when I connect all three to the splitter it only gives me one!
I have three questions:
1) Is it just a a dodgy Splitter?
2) If so can anyone recomend one that will work or a way to do what I want?
3) Is it possible to install a second graphics card such as another ATI Radeon 9600 XT and run 3 displays from them?
I'd very much appreciate any suggestions.
Cheers GR
G5 2.5 Duel Mac OS X (10.4.8) G4 17" Powerbook 167

Thanks very much.
That does answer my question but doesn't solve my problem...
It seems to be working on all three monitors in that configuration but it doesn't really do what I need in terms of the physical placement of the Apple Displays - I need them to stay together unmirrored and the Philips monitor a few metres away mirroring one of the Apples. (I'd love to get another 23" Apple but it's 5 x the $$$). How slow in everyday terms would it be with an extra graphics card? I'm doing this for a music recording set-up.
Thanks again for your help.
Cheers GR

Is there a way to prevent the display from waking up?

is there a way to prevent the display from waking up when using the (play, next, volume up/down, etc.) keys for itunes?

How to stop the searching on dashboard when one opens the dashboard...
If you search, there are more threads on this topic in this forum.

Internal drive for Macbook Pro 13 inch with Retina display from late 2013?

Hi everyone. After some water spillage to my new computer, the guys at the Apple Store have told me that my internal hard drive needs to be replaced. No other damage was done, thankfully. I have a Macbook Pro 13 inch with Retina Display from late 2013. The Apple genius said my current hard drive has flash storage, and that my new hard drive will need that as well as the computer requires it. Does anyone know where I can buy such a hard drive? Is it possible to buy it from Apple? I am happy to buy online or in a store (I live in Australia). Also, is this Mac Pro model difficult to take apart? I'd like to install the hard drive myself.
Thanks in advance to anyone who can help!

From the specs:
STORAGE AND MEDIA
Storage
256, 512 GB, or 1 TB flash storage
Media
Optional Apple USB SuperDrive

External display issues when waking display from sleep

After waking my external display from sleep (the entire Macbook was not asleep, just the external display), the garbled colored dots kept appearing at the top and bottom of the screen, only then for the entire display to go black, then about 5-10 seconds later the images comes back, but with the garbled colored dots at the bottom. It will keep doing this over and over again.
It's only happened once so far, but I seem to remember reading about some issues when waking from sleep with the new unibody Macbooks with regards to external displays. Is this a known issue with these Macbooks?

There have been similar reports. However, not all external displays in combination with a MacBook will exhibit this problem. Thus, it seems either display specific or something that is caused by a cross between one display and a MacBook.
I assume that you are using one of Appe's mini DisplayPort to DVI adapters to connect to the external display. In that case have you installed the latest firmware update for the adapter?

Problem viewing .xlsx and .xlsm file in DMS using Display from Archive Link

Hello All,
We are using IXOS as a content server for storing the documents through SAP Archive Link.
We are not storing any documents in SAP DMS.
The client has an requirement to manage .xlsx and .xlsm documents.
1. xlsx - We defined a new document class xlsx under SAP NetWeaver ..-> ArchvieLink and made the required mime and sheet settings. This allows to upload a .xlsx file to IXOS server succesfully (using Check in Archive) link.
But whenever we try to view the file using "Display from Archive", the browser gives a warning message that the file is in different format than xls. Do you want to still open (Standard Excel application message). On clicking yes, the file opens in .xls format instead of .xlsx.
The client doesn't want to change the format to .xls. What can be done to preserve the .xlsx files.
2. xlsm - Any clue as to does SAP ECC 6.0 support this file type for DMS? And if how the config settings are to be done?
I will be grateful any help.
Thanks.
Ketki

Hi Ketki,
based on your description I think that maybe SAP note 1289314 could help here and made sure that the local copy also has extension XLSX or XLSM.
Best regards,
Christoph

[Solved] Openbox-Message: Failed to open the display from the ....

ArchLinuxForums_Suck wrote:
Hey, I'm new to Arch and I've been working on setting it up on my Laptop and so far I haven't had very many problems save one. I can't get any of the available Window Managers. Whenever I try running them I get a message like:
"wmii: fatal: Can't open display," or "Error: Couldn't connect to XServer" (Fluxbox), or "twm: unable to open display" or "dwm: cannot open display" or "Openbox-Message: Failed to open display from the DISPLAY environment variable,". What am I supposed to do? I've checked to see if it was a problem with my installation of Openbox by reinstalling that and installing several other window managers, and I've checked to see if it was a problem with me not having the right kernel modules loaded, but after I ran "hwdetect --load-modules," which is supposed to load all detectable modules, but even after that I still get the same messages. Any ideas, I've tried just about everything that I know\have thought about, so yeah... any ideas?
ngoonee wrote:You'd need to provide us with details on your system. For example, what GPU are you using? hwdetect can be hit-and-miss sometimes.
karol wrote:How exactly are you trying to run them? Are you trying to run them as root? Are you using .xinitrc? If so, post it.
Boxes wrote:Uh... I try running them by typing: "openbox" or "twm" or "wmii" or "xinit openbox-session", and when I run "xinit" by itself, I get this: ". . . (EE) Failed to load module 'glx' (module does not exist, 0), (EE) Failed to load module 'intel' (module dose not exist, 0), (EE) Failed to load module 'vesa' (module does not exist, 0), (EE) Failed to load module 'fbdev' (module does not exist, 0), (EE) No drives available." Oh, and nGone I'm running an Intel Mobile 4 Chipset. I don't have a GPU. I just have an Intel Graphics Controller.
Boxes wrote:Okay, well I got "xinit openbox" to work by searching for the "intel," "vesa," "fbdev," and "glx" packages via pacman and installing them. I still can't run openbox without xinit, and I tried running "xinit wmii," but it didn't seem to work, although it did run, but I couldn't do anything. It looked exactly the same was as "xinit openbox" did right after I installed "vesa," which was the first package I downloaded and installed via pacman.
tomk wrote:
You need to read a bit more about how X works - you can't run any window manager unless there's a X session for it to run on. That's why xinit works. Set up your ~/.xinitrc correctly and use startx.
xinit wmii ran a wmii session, but I guess you didn't configure it at all - that's why you couldn't do anything. Again, more reading required.

Oh, I see. So an X-session is something that's required. Oh, okay.

Help! R5770 Hawk - No display from wake-up

No display from wake-up (Fans, lights are on, HDD spinning...). Latest ATI CCC 11.3 installed. To get displaying on monitor, I have to long press power button to shutdown (?), then press power button to restart (?). However, Win 7 stated "Resuming windows" ...
Any idea? Thanks for your helps.
My system:
MB: ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
GPU: MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
PSU: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Display: HP 2511x using HP supplied DVI cable.
OS: Win 7 Pro 64

Ask Asus support, this is mainboard related

Iq772 no display from monitor

Hi have a iq772 pc and there is no display from the monitor, dvd, power buttons seem to work ok, think this may be an inverter problem, however can't seem to work out how to dismantle the casing from the screen. Any ideas, many thanks.

How have you guys got on with your screen issues. I find it crazy that HP havent not take responsibility for this issue. There seems to be lots of people out there with the same issue. My unit is about 2 years old and is now completely useless. A.) I cant afford to spend £398 on a new motherboard and B.) If I could afford to, I would probably put it towards a new PC.
Any help what so ever would really be appreicated

How to display from JANUARY to Current Month(SEPTEMBER) in dual.

Hi Dudes,
I want to display months from JANUARY to Current month
here my input is sysdate,so it should display from January to sysdate month(i.e) upto september
how it is possible in a query?

Hi dudes,thanks a lot for all your help.
i would like to display all your output which i have i got in my screen
so it will be helpful for others also
SQL>select to_char(add_months(to_date('01-01-'||to_char(sysdate,'yyyy'),'dd-mm-yyyy'),level -1),'Month') months
2 from dual
3 connect by level <= ceil(months_between(trunc(sysdate),to_date('01-01-'||to_char(sysdate,'yyyy'),'dd-mm-yyy')))
4 /
MONTHS
January
SQL>select to_char(to_date(to_char('01/'||to_char(to_char(sysdate,'MM')-level+1)||'/'||to_char(sysdate,'YYYY')),'dd-mm-yyyy'),'MONTH')
2 from dual connect by level < = to_char(sysdate,'MM');
TO_CHAR(T
SEPTEMBER
SQL>select to_char(add_months(trunc(sysdate,'YYYY'),level -1),'Month')
2 from dual
3 connect by level <= ceil(months_between(trunc(sysdate),trunc(sysdate,'YYYY')));
TO_CHAR(A
January
SQL>select distinct to_char(dt,'Month') dat from
2 (
3 select dt from
4 (
5 SELECT TRUNC(SYSDATE,'y')-1+ROWNUM dt
6 FROM all_objects
7 WHERE ROWNUM <= ADD_MONTHS(TRUNC(SYSDATE,'y'),12) - TRUNC(SYSDATE,'y')
8 ) where dt between trunc(sysdate,'yyyy') and sysdate
9 ) order by to_date(dat,'Month');
DAT
January
February
March
April
May
June
July
August
September
9 rows selected.
SQL>THANKS ALL...

How can i get an original iphone4 retina display from apple?

can anyone tell me ,hw to get iphone4 oem display from apple? i've no reseller or any apple guyz here!plz help

The material of the screen has nothing to do with water runoff. That comes from the oleophobic coating, not the glass. And again, any parts you find do not come from Apple; again, Apple does not sell parts to anyone. You may find parts from the same manufacturers Apple uses, but there's no way to guarantee that.
The issue is academic, though. I'll say this once again; the only way you can guarantee that you get only Apple-certified parts is to have the iPhone replaced by Apple. That is the only way. From any other source you''re taking your chances, and whether the source will accept a return and refund the money in case of a fake (this presuming you can tell it's a fake at all).
'nuff said.

Select Table row(eg.3rd),rows displayed from the selected row,hiding above

If we move the horizontal scroll bar of the table and filter a column when there is a selection on the row, the rows are displayed from the selected row. The rows above the selected rows are disappearing(F5 it come back) and the rows are available when there are more rows with vertical scroll bar(above the selected row, if we scroll up).

Frank,
Mailed to you the sample application with the table script too. Please review the comments in the mail.
Thanks and Regards,
Stanley William
Edited by: STANLEYWILLIAM on Apr 22, 2013 3:52 PM
Edited by: STANLEYWILLIAM on Apr 22, 2013 3:52 PM

No display from my m8400f PC

Similar Messages

Maybe you are looking for