No display, need Zen V menu list

Hello all! I have my daughter's "cast off" Zen V. It has a broken volume switch (turn up button doesn't spring out). I figured out how to use the player with the bad switch without much problem. Then the display faded and went out (permanently so far). For the past year I have used the player without a display. I use Microsoft's Media Player to re-sync new music every so often.
The problem is that after reloading I need to select "random play all" before I can hear any music. I usually spend about 0 to 20 minutes trying to fight my way through the menus to select random play all. After that I use it with no problem.
The question is this: Does anyone know of a list of the menu tree for the Zen V (not the plus) In a perfect world it would be a PDF document from Creative but after looking I suspect it doesn't exist. I have a rudimentary list I created by watching some programming posts on Youtube. I suspect something is not quite right since selecting random play all does not always work the first time.
I'm not even sure that when I press the "backup" or "go back" button (the one below play/pause) where it actully ends up after pressing it a bunch of times. I think it is "music library" (so if I were to then press the select button it would go to the music library), but I have been wondering if instead I need to press "down" to select music library. Any assistance would be appreciated. I hate to throw it away becuause without a display it works very well and the battery lasts a long time!? :-)
Here is the menu as I think I have it:
(main): music library - now playing - photos - videos - FM radio - extras - system
(I don't think I have FM radio on my player but I am not sure)
(music library menu): playlists - albums - artists - genres - alltracks - recordings - bookmarks - dj
(dj menu): album of the day - random play all - most popular - rarely heard
Thanks -- HD

Hey there,
for a few days I had the WSoD on my Creative ZEN, so I needed a menuestructure, too. Now it's working again and I've wrote down the structure of the ZEN, seems to be equal to your player, just try it:
Microphone
Pictures
Music
actual Title
Playlists
Albums
Artists
Genres
all Titles
Records
Bookmarks
DJ
Album of the day
coincedence (all)
most popular songs
Videos
FM-Radio
Extras
SD-CARD
System
By Zen there is another problem, when you"re pressing the back button for 0 times for getting into players beginning menuestructure it will not do it. So try to press 0 times the back button, then 0 times the up-arrrow button, the I think you must be at menuepoint "microphone".
Hope could help you. Greets

Similar Messages

Need help on menu list logic

Thanks in advance!
I need help on a menu list logic.
There's this main menu which has 6 list buttons, and second
list with 4 buttons.
When I press on one button, it should load the next list.
Problem I have here is when I click on the one button, it
clears the previous main list buttons (which is what I want). On
the second list, it only shows the last button, aka 4th button.
I've attached my code here below, which is in the first
frame.

After posting this the solution hit me.
I had to pass the parameter for the createButton as a "_root"
instead of "this"

Drop down list created by fireworks MX disappears behind Flash movie. Is there a way to have the menu list display front of Flash movie?

Drop down list created by fireworks MX disappears behind Flash movie. Is there a way to have the menu list displays in front of Flash movie, pls. let me know what I should do to have the drop down menue not disappear behind the Flash movie.
Thanks,
[email address removed by host]

Wrong forum... this is to discuss the operation of the forums, not products
You need a forum for Fireworks or Flash or maybe Dreamweaver
Go to the index at http://forums.adobe.com/index.jspa to find the correct forum for your question

Problem with REUSE LIST DISPLAY , need to add std button in list.

HI All,
I make a ALV report with the use of ALV_GRID_DISPLAY after that if we click on perticular column then secondry list should be display for that i use :
            CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
              EXPORTING
                i_callback_program    = sy-repid
                is_layout             = w_gs_layout1
                it_fieldcat           = w_gs_fieldcat[]
                i_save                = c_x
                i_screen_start_column = c_start_column
                i_screen_start_line   = c_start_line
                i_screen_end_column   = c_end_column
                i_screen_end_line     = c_end_line
              TABLES
                t_outtab              = tl_nonlabor_comb[]
              EXCEPTIONS
                program_error         = 1
                OTHERS                = 2.
            IF sy-subrc <> 0.
              MESSAGE text-072 TYPE c_s DISPLAY LIKE c_e.
              LEAVE LIST-PROCESSING.
            ENDIF.
data is comming perfectly but i need one std button in secondrly alv for EXCEL DOWLOAD , so how can i include?
Thanks ,
jaten

Hi,
Create a copy of PF-STATUS of the screen of the ALV grid which is displayed to your program.
Add the new button in the PF-STATUS.
Create a subroutine within your program.
In this subroutine SET PF-STATUS (copied pf-status).
Pass the form routine name for setting the copied PF-STATUS to the parameter I_CALLBACK_PF_STATUS_SET.
Create a new subroutine in your program to handle the oK_CODE for the new button.
Pass this subroutine name to the parameter I_CALLBACK_USER_COMMAND of the FM.
Pass the value of call back program (sy-repid) to the parameter I_CALLBACK_PROGRAM.
Regards,
Ankur Parab

Multiple Menu List Selection question.

In a form I have a multiple select list that's populated dynamically from a table, e.g. label = full name, value = name_id. I need to be able to insert both label and value into another table. Normally, selecting a label will insert the value, but what technique (short example, please) can I use to extract the label itself as well as it's value from the list?
Thanks!

Hi there,
If you are prepared to consider a commercial solution then
you might
like to take a look at the WebAssist extension "Database
Search"
To learn more about this extension please visit the web
address I have
included below:
http://www.webassist.com/professional/products/productdetails.asp?PID=72
You might also like to consider our Dynamic dropdowns
solution. To learn
more about this product, take a look at this URL:
http://www.webassist.com/professional/products/productdetails.asp?PID=1
Feel free to contact me off list, if you would like to learn
more about
either of these or any other WebAssist software.
Regards,
Mark
Mark Fletcher
WebAssist.com
MacPMH wrote:
> Hi All,
>
> I am looking for a dreamweaver and/or PHP/MySQL tutorial
and/or extension
> and/or tool that can walk me through creating an
advanced search page. For
> example, I have multiple search criteria which allow
users to select various
> criteria:
>
> Menu/list #1 (Allows multiple)
> Option 1, 2, 3?25
>
> Menu/list #2 (Allows multiple)
> Option 1, 2, 3?50
>
> Menu/list #3 (Allows multiple)
> Option 1, 2, 3?10
>
> Radio button (allows user to select the way the
information is displayed)
> By Date
> By State
> By Score
> By whatever?
>
> Drop down (allows user to select how many records to
display)
> View 25
> View 50
> View 75
> View 100
> View ALL
>
> Any comments and suggestions would be greatly
appreciated. BTW, I consider
> myself a step above the beginner level - could consider
myself an intermediate
> user of Dreamweaver, PHP/MySQL so please be gentle
>
>

Interactive Reports and menu list translations

Can anyone tell me how to translate the menu items contained in the interactive reports menu list (ie Select Columns, Filter, Sort....) ? I have translated an application into french and when I switch to that language the menu items in the interactive reports are still displayed in english yet the rest of my application is french. The translation file does not contain these items to translate. Can I make these french somehow? Its a pretty powerful tool, but not not if you can't make it language specific. Our french users would not accept this in english.

Hello,
>> Can anyone tell me how to translate the menu items contained in the interactive reports menu list …
The following section of the documentation explains exactly that - http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/global.htm#BABHCAAH .
For complete translation of the IR, you’ll need to translate all the string messages in table 16-4.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

Some one's email id is displaying on the update menu of the app store what was that

some one's email id is displaying on the update menu of the app store what was that

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

Disable MENU list (grey-out one of Menu List)

Hi Experts,
I want to disable disable/grey-out one of the Menu-list
Ex:
'Document' is a Menu
'Display' 'Change' & 'Exit' are 3 lists in 'Document' Menu
And I need to grey-out 'Change'
Thanks in Advance.

Hi Manoj,
I think EXCLUDING addition with SET PF_STATUS is used in pushbuttons for toolbar.
Please tell me how to grey-out/disable an ITEM from MENU LIST.
Ex.
FILE is menu
-NEW
-OPEN
-SAVE are 3 items in FILE menu
and I want to grey-out OPEN item.
Regards,

Is there any way to delete a page listing on the top of the IWeb site. I created a page which has links to the other pages, so I don't need all of them listed on top...

Is there any way to delete a page listing on the top of the IWeb site. I created a page which has links to the other pages, so I don't need all of them listed on top...

Better ask in the iWeb forum.
Answer : inspector > first icon from the left > uncheck 'Display navigation menu'
For future reference, also look at the other icons.

Component is not getting displayed in process scheduler menu

Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available.

HP Photosmart Plus B210a all-in-one won't display any networks in the list.

Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
First off, it won't connect wirelessly.
It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
Can anybody help at all?

Top line says "The wireless radio is not functioning. Contact HP support"
I take this as a very bad sign and needs replacing?
The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

How do you change the fields that are displayed on the email preview list after a search?

How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email? All of a sudden the displayed fields changed on me whenever I do a search in mail. When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field. However, when I do a search this changes to the "To" field. Can anyone help? Thanks, ccarey

ipicus
But why would you want this?
iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
Regards
TD

I need help creating a list of vertical clickable buttons in an aside

OK so here is the setup for this site I am working on. http://www.bestmarketingnames.com/default2.php I need to change that list on the left side into real buttons with destination when you click them. Here is a link that i have been tinkering with. http://www.bestmarketingnames.com/default.php I need them to fit in the left aside and vertical. I can't make them vertical. I'm sure it's a fairly simple thing but I don't know how to do it.
Thanks

Try this:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5, Vertical Menu</title>

<style>
    /***add these to your CSS Reset***/
    margin: 0;
    padding: 0;
    -moz-box-sizing: border-box;
    -webkit-box-sizing: border-box;
    box-sizing: border-box;
nav {
    width: 250px;
    background: #555;
    color: #FFF;
    font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
nav li {
    list-style: none;
    width: 248px;
    line-height: 2.5em;
    border: 2px solid #CCC;
    text-align: center;
    font-weight: bold;
    font-size: 16px;
    cursor: pointer;
nav li:hover {
    background-color: #FFF;
    color: #000
</style>
</head>
<body>
<aside>
<nav>
<ul>
<li>Menu 1</li>
<li>Menu 2</li>
<li>Menu 3</li>
<li>Menu 4</li>
</ul>
</nav>
</aside>
</body>
</html>
❄ ☃ ❄Nancy O.

How to change color of DHTML sub menu list

Hi all,
In my application i am using DHTML submenu list. But I have to change the color of
the menu list which is selected currently.
In interactive report how to fix the column width , because if one column has big string it's going to the right side. My requirement is after fixed column width it has to come in the second line.
pls help me. I am in urgent need.
thnks
pnr

im a bit confused with the post so hopefully this will help you, if not then let me know.
I think the problem is that in your renderer your saying
setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
populating the list
public void populateList(){
        DefaultListModel model = new DefaultListModel();
        for (int i=0;i<10;i++){
            JLabel newLabel = new JLabel(String.valueOf(i));
            newLabel.setOpaque(true);
            model.addElement(newLabel);
        this.jListExample.setModel(model);
        this.jListExample.setCellRenderer(new RowHeaderRenderer());
    }the renderer
class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    public Component getListCellRendererComponent(JList list, Object value,
                                                  int index, boolean isSelected, boolean cellHasFocus){
        JLabel aLabel = (JLabel)value;
        if (isSelected){
            aLabel.setBackground(Color.RED);
        }else{
            aLabel.setBackground(Color.GRAY);
        return aLabel;
}

No display, need Zen V menu list

Similar Messages

Maybe you are looking for