No display of currency - unit in bex

Hi,
I have a problem regarding currency translation - coversion. I have made a currency translation type from USD to EUR with fixed target currency EUR. When I use the conversion in BEx query it works, but it does not show the currency unit EURO into the scaling factor.
Does any body know how to solve the problem?
THX
Miha

Hi
Go to the BEx query designer and check query properties in the header of the query....find whether dispaly scaling factor is tick marked .....
Assign points if useful
Regards
N Ganesh

Similar Messages

Subject: Displaying key figures without currency unit in BEX reports

Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran Adal

Hi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran

Improper display with Currency/Unit in drilldown

Hi ,
There are 2 KFs in the query , 2nd KF is one level down (i.e inside the triangle of first KF) .
KF's are :
Net value
Net val in doc currency
when i drill down on Currency/unit it just drills down by statistics currency (i.e for first KF) it doesn't display other currencies for KF Net val in doc currency .
But when i bring the 2nd KF to same level as first KF (i.e outside triangle) it works properly .
Can any one tell me the reason if you had a similar case .
I think it's some front end problem ?
Thanks
Gururaj

Gururaj,
I think that it is normal behaviour.
When you drill down by currency, the 1st KF is drilled down. For example, after drill down you have several rows (columns) with particular statistics currencies.
The currency shown in each particular row (column) acts like a filter for subordinate nodes.
If your doc currency doesn't equal to statistics currency, nothing will be shown.
Best regards,
Eugene

Preventing display of currency unit infoobject values in a report

Hi,
For a currency type key figure, there is a currency unit infoobject specified. This has INR (Indian Rupees) as its value in the infocube for all the records. When I display the KF in a report, the value of the associated currency unit also gets displayed with it. Is there any way to not get this display of the associated currency unit other than not having any currency unit values in the infocube?

Hi Jr,
Thanks, that works.

How hide currency unit in BEx 7.0

Hi,
in my report I see the column values suffixed with the currency unit ex: 793,23 USD. How do I hide the "USD" in my report. I am working in BI 7.0
thanks,
sd

Create a Formula Key Figure (FKF) and use NODIM from the Data Functions for this and hide your original Key Figure (KF).
FKF = NODIM (KF)

Display currency unit field in FM reuse_alv_grid_display

Hi friends,
I am using ALV list, I want to display the currency field as a column in the list , also the '$' sign should get displayed in the amount field .
I have used the logic given in the SAP help, but i am unable to display the currency unit.
can anybody help me out .
Thanks in advance for the suggestions.

Hi Poonam,
I think you cannot have the $ sign in the same amount field if you have declared it as a TYPE CURR field.
YOu can have an extra field, immediately after the Amount Field which has a value '$' in it.
If you want to have the dollar sign in the field itself, then concatenate the amount field and '$' sign into a common field and build a field catalog for that field.
But there is an inherent disadvantage with this approach that you will not be able to have utilities like totals, subtotals etc.
Welcome to SDN..:)
Regards,
Ravi
Message was edited by: Ravi Kanth Talagana

How to display Currency Unit beside value in BEx Report?

Hi,
I have 2 separate Amounts in the columns area. Their respective currencies exist as Characteristics in Unit dimension. How do I display the amount along with currency unit beside it?
As of now my Report looks like....
Amount 1              Amount 2
2000                     3000
I would like to display it as......
Amount1           CUR                Amount2          CUR
2000                 EUR                 3000               USD
Thanks,
SD
Edited by: Sebastian D'Souza on Jan 16, 2009 11:40 AM

Hi Sebastian,
Yes it can be possible to get the currency unit along with currency in ur report.
To do this, first of all u need to have the currency unit in ur flat file or else in ur data.
If u have so, here are the steps to do that.
1.Double click ur amount info object under 'currency/unit of measure tab' , in the unit/currency field just give as 0currency.
2.And then activate ur info object.
3.In Transformations u will find another field '0currency', just map it to the amount field.
and then do the process as usally loading data to target, and the execute the report.
u will be able to see currency unit filed also.
hope this helps u.
Thanks,
Sai Chand.

Display currency unit in ALV

hi,
can anyone tell me how to mention the currency unit in the field which is displayed in ALV???
ex: 250 USD in a single column.
i have used ALV grid display.

hi,
i tried doing that but im not getting it.
please help.
i used what u said.
it_fcat-col_pos = 9.
it_fcat-fieldname = 'DISCAVAIL'.
it_fcat-cfieldname = 'WAERS'.
it_fcat-tabname = 'IT_FINAL'.
it_fcat-do_sum = 'X'.
it_fcat-seltext_m = 'DISC AVAILED'.
APPEND it_fcat.
this is the thing
Edited by: Poonam Naik on Jul 22, 2008 9:09 AM

Display selected currency translation type in BEX webappl report

Hi everybody,
we use currency translation at query runtime. We do not select the translation type in the variable screen but use the possibility with Context menu -> Calculations and Translations -> Global Currency Translation
Everything works fine, the conversion is done correctly BUT I want somehow display the selected tranlation type on the report! Is this possible? As I know there is the possibility in web applications to call a class method at runtime, maybe there exists a function module or class which can return the actual translation type used.
There must be something like that because when I select the context menu "Gloabl Currency Translation" again a second time, the actual translation type is selected in the combo box.
We also need the information on the generated pdf dokuments.
Thanks for any hints!
Regards
Oskar

Dear Oskar,
have you found a way to display the currency translation info in web report? Or could somebody give me enlightment whether this is possible? Thank you in advance.
Best regards,
Mariana

Group Currency Unit

Hi,
I'm working on one of the reports which displays group currency. I'm using a function module to convert the incoming local currency(which is in different units like GBP,AUD) into the group currency which is in USD. After loading the data the currency field is populated with USD(which is right as all the currency values are in group currency which is in USD).
But when i write a query on this data the Bex analyzer displays the right value for group currency but its unit is the same as the Local currency. Can somebody throw some light on this.

Hi Ravi,
All currencies will refere to 0CURRENCY (they are created as a reference to 0CURRENCY.
If your local currency amounts have assigned to 0CURRENCY, then you need to have another currency key, say ZGRPCUR, created also as a reference to 0CURRENCY.
You need to have this ZGRPCUR in the cube. If it always 'USD', then in URs you may assign it to a constant 'USD'. If this currency is determined earlier, say, in transfer rules, you need to have it in the comm structure too.
If you make all currency translation before or on a cube level (not in a query), then you need to have the custom key figures for a balance, debit and credit inflows (though some of them might be not necessary if you calculate them on a query level) and assigned to them ZGRPCUR.
Best regards,
Eugene

Currency unit in Report painter

Hi,
I met a problem when i maintain a report using report panter. Table FAGLFLEXT is used for the library, and I want to using currency translation function. I use Basic key figure "HSL local currency" and CC_HSL translation local currency for the report. But when i run the report, there is a problem, system tell me that can not find the unit of source currency, so can not translated to target currency. The data of local currency can be displayed.
i set the format of the local currency column, find that even i click "print the unit", there is no currency unit of the data, so I think there is some problem.
What is the problem? thank you!

Hi Amir,
Thank you for your answer.
I changed the key figue to "Crcy Transltn TransCrcy (Act.)" as told, and run the report again, but still have problem.
No valid exchange rate for currency translation from to USD
Message no. GR640
Diagnosis
The system could not find a valid exchange rate for the currency translation.
System Response
The system could not translate into the target currency.
Procedure
Check the target currency, the exchange rate date and the exchange rate type.
I am sure i have maintain the exchange rate type and related rate.
The setting of "Define Currencies of leading Ledger" is "1 Translation taking transaction currency as a basis".
I think the problem is that the system cannot find the unit of the currency, so the error massage display as "No valid exchange rate for currency translation from to USD". If can find the unit of currency, i thought the message should be like "No valid exchange rate for currency translation from EUR to USD".
If the unit can be found, I think after set the format of the column "print the unit", in the report the unit can be displayed. But in my system, can not display the unit.
What do you think about this? thanks in advance.

Wrong Currency shown in Bex Analyzer / SFr. Symbole in Excel

Hi Experts,
Hi have a question regarding the display of currency in Bex Analyzer.
I have a report showing Euro in the most of columns and one column should shown usd. The conversion is done in the backend.
By running the report the column which should show USD show SFr. (Not a currency).
In Excel i checked in format cell--currency. There SFr. is define as Symbole. It is a general problem. How to solve it?
Thanks
Gilo

Hi Andrey,
thank you for replying.
Have you added IO currency to rows ?
-- Other Columns with Euro are showing the correct currency.
Does your conversion work correct ?
-- Yes
If you execute the report in bex query designer (via web) do you get correct results ? i can not execute via web.
I execute in rsrt and the column is showing the result with $. I expected to see USD.
1. why is bex showing the wrong currency?
2. why is the result under rsrt with $ instead of USD?
Thanks
gilo

Currency UNIT at row level

Hi Experts,
I am using BI 7 and my reports are showing Currency Unit for key figures at the top (in row header only)
Whereas I want them to be shown with the Key figure Values.
Current View                             Desired
plant    Sales                         plant     Sales
          USD
US01     100                            US01     100 USD
US02     50                             US02     50 USD
Is there any setting where I can achieve the above feature.
Appreciate your help.
Best Regards,
Pratap Sone

Hi Pratap,
    Please refer the following link for query properties.
[Currency and Unit Display in Business Explorer|http://help.sap.com/saphelp_nw70/helpdata/en/08/81b98895e911d4b2ca0050da4c74dc/content.htm]
In that there is a setting mentioned for displaying the unit in the header.
Please check and I hope this helps.
Regards.

Currency Unit Problem

Hi all,
I have a problem to display amount of different currency unit in a single column. i want to display report amount based on account no
on that i have some canadian account and US account. amount unit for canadian currency is CAD and for US it is USD. user wants to display amount and there unit side by side. the problem is in the subtotal or overall result is comming as * due to CAD and USD. i cant use NDIM function as user wants to display amount and currency unit together.
can any one suggest how can i solve this issue.
samit

one more option would be:
Create two restricted KeyFigures. One for USD and one for CAD .So that you could see all USD amounts in one column and all CAD amounts in different column..Hide base keyfigure.Now you will not get * for subtotals and Overall result and amount and currency unit will be displayed together
Message was edited by: Murali

Cannot add Currency Unit in CUbe

Hello,
I am trying to add a currency unit (ZCURR1) which I created to my Unit Dimension in my InfoCube. This unit is created under the 0UNINOTASSIGNED InfoArea. The problem is I dont see any of the units (currency units etc) under the 0UNINOTASSIGNED InfoArea when I wish to drag & drop the same. Do I need to make any changes?
Interestingly, I see 0CURRENCY already existing in my UNIT dimension of the InfoCube. But when I go to the Transformation Screen, I do not see it. Why is it so?
POINTS WILL BE AWARDED!!
Regards,
SD

Hai Sebastian,
If you have created ZCURR1 as an attribute you cannot drag and drop in to the unit dimension.If its been created as navigational attribute you can see under the navigational attribute folder,once the master key charcterstic is dragged in to the dimension.while executing a query you can see ZCURR1 in the attributes folder,irrespective of display or navigational attribute.
You can see the 0currency in the unit because you must have got a key figure which is a type CURRENCY and which is not fixed currency.

No display of currency - unit in bex

Similar Messages

Maybe you are looking for