No display when dragging regions

normally, when dragging audio and midi regions in the arrangement window, a transparent copy of the selected region appears right when you left click and hold, and this copy follows the mouse icon so you can see exactly where you're moving it before you let go of the left click.
my copy isnt showing up at all, so when click, hold, and drag, i don't see anything except the mouse icon. so i don't know where i'm dragging the regions to until after it's there. i must have accidentally turned the display off somehow. how do i fix this?

Greetings Troy,
Are you getting the startup chime *bong* and / or do you feel air coming out the ventalation port so you know it is powering on at all?
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
Remove any RAM that you may have installed after you bought the computer and put in the original memory (if applicable) and test.
Try a different wall outlet for the computer, one that is currently working fine for another electrical device.
If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
Best of luck to you.

Similar Messages

Mac Pro + Airport Extreme = Mouse Cursor Chaos Display Issues When Dragging

Graphic display issues (mouse lag and latency displayed on the screen when dragging an object (photo, window, application, document, etc.) from the top 50% of the screen to the bottom 50% of the screen. Mouse cursor starts to display serious lag and latency and loses ability to stay on the object being dragged anywhere below the 50% horizon line of any display.
Mac Pro (any model 2007 to current 2009 production) with Airport Extreme installed.
Symptoms:
On any object the mouse cursor selects and then drags from anywhere in the upper portion (50%) of the screen display (no matter the display being used) to the bottom portion (50%) of the screen display, shows great lagging and latency as if the cursor is "hanging on for dear life" or as if the processor were running several intense applications and cursor was not responding.
The mouse cursor fails to stay in concert with the object being dragged anywhere in the lower portion of the screen although is fine in the upper portion of the screen.
Issue only presents itself when selecting and dragging an object from bottom to top or top to bottom of the display.
I have deduced that the issue with this "polarity" (i.e. the 50% horizon level of the screen north and south) is due to some magnetic or waveform interference from the Airport Extreme card and most likely due to its position on the motherboard and/or next the the Intel processor. Also could be enhanced by the Bluetooth card which is also located next to this card.
After checking various Mac Pros (at Apple stores, friends and received via Apple Online store) the common denominator is the Airport Extreme Card. When it is NOT present, no issues are present with display cursor lag; when it IS present, all the above apply.
No one at Apple seems to realize this issue or cares about it. Ditto for Genius Bar Apple Employees; seems to be a mystery on par with the Bermuda Triangle (which ironically is also magnetically-polarity related.)
Still waiting for a Apple Product Engineer to contact me and have 3 tickets open with Apple from 3 different Mac Pros on this. Problem first noticed May 2009 although first generation Mac Pro from 2007 also suffered same issues and just now putting the puzzle together on this relationship.
Any others out there notice this as well? Check it out if you have a Mac Pro and Airport Extreme Card installed inside of it.

I also have the same exact problem. I have a i5 iMac Mid 2011 with an upgrade to 10.10 Yosemite connected to an external display. I like you never had this issue with Mavericks. Zoom is so painfully slow now that I had to disable it. My iMac has 12 GB of RAM and even with no apps opened, zoom is killer slow.. makes me want to punch a wall-kinda slow.
I think it's clear to say that something is up with 10.10.. some bug.
Apple please fix us zoomers

My safari will not open after downloading librooksbas.dylib plug in. message that is displayed when i try and open is "safari quit unexpectedly while using the librooksbas.dylib plug in" i can either re-open or ok the error to which neither work :(

i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

Content does not display when page first opened

Hi All;
I have a contenta are/region which I have divided into multiple tabbed areas. I have two main tabs that divide the content into two major topics. Within each of these main areas I have added 4 to five tabs. One set for example holds a calendar, another tab a news release area and a third a content area for holding multiple folders of a department's documentation. The problem I am encountering is that when I first bring up the page all I see are the tabs and no matter what tab area is exposed the content within it is not displayed. For example, I start with the Calendar tab active (the calendar does not display). I then click on to say the document area, which displays all of its content's correctly. When I return to the calendar tab the calendar is displayed. My question... how can I ensure that the calendar (or any other tabbed area's content is displayed when the user first brings up the page?
PS. This is a hot topic since I will be demoing my pages to my managers next week in an effort to convince them that Oracle Portal is the way to go.

When I email the page to our server, the href links are missing.
You email the page to the server? What does that mean?
MaureenHayslett wrote:
I am using CS3 on Mac OS 10.6. The page previews perfectly in Safari. When I email the page to our server, the href links are missing. For example, the banner doesn't use the correct font, and the background color the the whole page is missing. Please go to http://www.crhcarchives.org/links.html
All of the other pages on the website look correct. Thank you.
Look at the source on that page. There is virtually no styling on it....
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css">

</style>
</head>
There is nothing telling the page which fonts to use, or which colors to use. Are you sure you have uploaded the correct page?

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

ORA-06502 when searching region source

The following is listed as a limitation of Apex 3.1, for both interactive reports and the application builder, although the specific context is not mentioned.
The row length limit is 32k (just as with Classic Reports). You can include more columns but if too many are selected to be displayed, the user will get the following error - "ORA-06502: PL/SQL: numeric or value error: character string buffer too small". This should be considered when creating your report.You can find that here: http://www.oracle.com/technology/products/database/application_express/html/3.1_known_issues.html
I'm getting this very error when trying to search region source for one of my application items. Presumably the region source is larger than the 32k limit where my particular page item is being used?
Can anyone from Oracle verify that this is still a problem in Apex 3.2.0.00.27?
Earl

>
The following is listed as a limitation of Apex 3.1, for both interactive reports and the application builder, although the specific context is not mentioned.
The row length limit is 32k (just as with Classic Reports). You can include more columns but if too many are selected to be displayed, the user will get the following error - "ORA-06502: PL/SQL: numeric or value error: character string buffer too small". This should be considered when creating your report.
You can find that here: http://www.oracle.com/technology/products/database/application_express/html/3.1_known_issues.html
I'm getting this very error when trying to search region source for one of my application items. Presumably the region source is larger than the 32k limit where my particular page item is being used?
Can anyone from Oracle verify that this is still a problem in Apex 3.2.0.00.27?
EarlAnyone have any ideas about the above? I'm getting this error when searching region source code, here:
Home>Application Builder>Application nnn>Application Reports>Page Components>Search Region Source
Any help would be appreciated. Thanks.
Earl

Dragged Regions in Main Window Yank Leftward

I"m finding that when I drag a region down or up from track to track in the Main window of Logic Pro , the region yanks off to the left of its grid line slightly instead of going straight down. I have both Limit Dragging preference checkboxes checked, so this shouldn't be happening.
It's a workflow-killer, since if I'm dragging MIDI regions around, the back of the previous region gets chopped off, and for every drag I have to very slowly and carefully drag the region I'm moving back to the right to its grid line or the content in the dragged region is (obviously) out of sync. This happens at all maginfications, AFAIK.
Any ideas?

Just solved my own problem. Smart snap was on, though I wonder how smart it really is. I set snap to Bar, and I'm all good again. I have to dig into the snap options some more in the documentation. With great power comes...

UI delay when dragging

When dragging a key frame or object it takes about 10 seconds to let go of that object or key frame. I'm working in a after effects comp that uses 3d lights solids and ai vector imaged. The file was started on a Windows machine in which it had no issues
-I'm working in after effects on my new mac pro that is currently the fastest and most expensive computer that apple sells 5/25/14.
-I'm working in an after effects comp that uses 3d lights solids and ai vector images.
-The file was started on a Windows machine in which it had no issues.
On the Mac. Moving lights or key frames in the time line it really lags really lag and is barely workable.
Just got this mac wondering if I need to adjust settings. I hope...
BTW other things are in fact very fast such as ram preview

Todd
thanks for getting back to me so quickly I’ve answered the questions below.
Let if you need any thing else
G
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number.
After effects cc 12.2.1.5
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Yes this morning 5/25/14
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac”.
osx 10.9.2
If you are getting error message(s), what is the full text of the error message(s)?
No error message
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking
moving a key frame of element in an after effects comp
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
Yes on a different computer windows AE
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected.
Mac Pro
Processor 2.7 GHz 12-Core Intel Xeon E5
Memory 64 GB 1867 MHz DDR3 ECC
Graphics AMD FirePro D700 6144 MB
Software OS X 10.9.2 (13C64)
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
what it came with
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
NO
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime”.
illustrator files, solids, action essentials stock footage QT( PNG codec)
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2”
YES 10.3
What other software are you running?
None
Do you have any third-party effects or codecs installed?
not used in this comp but Motion tracker by foundry
Are you using OpenGL features in After Effects?
I don’t know classic 3d
Does the problem only happen with your final output, RAM preview, or both?
NA
Are you using Render Multiple Frames Simultaneously multiprocessing
NO
Are you using the ray-traced 3D renderer
NO
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
NA
24759 ViewsTags:

Why is there an arrangement button in Displays when I don't have an external display attached??

Why is there an arrangement button in Displays when I don't have an external display attached to my MacBook Pro?

I can't even get my pictures from iPhoto to my external hard drive I just bought.
Quit iPhoto and drag the iPhoto library to the external drive as an intact single entity - launch iPhoto while depressing the option (alt) key and point iPhoto to the new location - test the library fully and then delete the library from the internal drive
I'm about ready to just get a disposable camera and call it good.
No problem if that makes you happy
My hard drive is so full I keep getting messages that it's almost full and won't work right if I don't delete something.
That is correct - you must have 10% or a minimum of 10GB of free space for efficient and safe operation
I'm TRYING but nothing is working. It's very frustrating, isn't it?
Maybe if you would give some details on what you are "trying" and what is "not working" someone could help - above is a specific answer to the specific question on how to move the iPhoto library
Not to mention, the CD drive has a disc in it that won't come out. I'm not anywhere near an Apple dealer, and my MacBook is under warranty, so I can't go anywhere but Apple.
I would post that in the MacBook forum rather than the iPhoto forum
LN

Disable info pop-up when dragging layers? (Photoshop CC)

There's a little box that pops up when dragging layers in Photoshop CC that shows the unit info (pixels/inches/etc.) when dragging a layer. I don't need it and I find it distracting. I can't find any options for disabling it. Are there any?

Yes there is, but make a note of this in case you need it enabled in the future. It's a HUD (Heads Up Display) that allows you to see the transformation values in front of you while adjusting without having to glance over to the same values in the Info Panel.
Edit menu > Preferences > Interface > Show Transformation values: Never
will turn it off.
Gene

Button displayed among this region's items clears fields

I've created a Button displayed among this region's items clears fields that's in the middle of my form, set to Submit Before...
When click the button, it submits and the field items above the button clear off the form.
I don't need it to submit, I just need it to make three fields appear on the form if needed, hence the use of the button.
Thanks in advance!

Hi,
userRRRYB wrote:
The user is cataloging documents. On the form she enters document number, title, owner, and document type (Work Instruction, Verification Sheet, Pallet Layout, etc.) If the document type is a Product Label, there are three more fields that need to be populated. Because the Product Label is one of over ten types and it's the only type that requires these extra fields, I got the bright idea to create a button that, when clicked, displays the fields.
The problem is that the button is 'among the region's items' and submits when clicked (Request = Go) so it submits and clears the fields that have been populated prior to the fields in question.Assuming you are on Apex 4.0+ Instead of using buttons to display 3 extra fields when document type is product label use dynamic action to hide and show items, Here is how you create it
1) Create standard dynamic action
2) Selection type (item) -> item(s) -> :PXX_DOCUMENT_TYPE -> Value (20) Assuming you have created select list for document type field
3) Specify true action -> show -> item(s) (select the three items you want to display) -> create false action (checked)
By using DA your field values will not clear out.If you are on 3.0 you can do this with javaScript.
It would be easier to help you out if you provide APEX version or recreate your problem on apex.oracle.com
Regards,
-Senthil

I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

Vendor field should not display when GI is done in MB1A?

Hi guys ,
i have a report programe here i am pulling all the material data and purhasing order info in the background using the BADIO MB_DOCUMENT BADI. here i am writing my logic. this BADI is triggering once material Documnet is created in MIGO MB1A,MB1B,MB1C . when i am trying to excute the MIGO tranasaction all the data shoulb be displayed . when I am trying to excute MB1A Here i dont need one field like Vendor Number ? can any one please help me on these ?
Thanks In Advance.

Instead of <?for-each:G_CF_SUB_SEG_VALUE?>
use
<?for-each:G_CF_SUB_SEG_VALUE[TOTAL_CUST_AMT!=0 or TOTAL_CUST_B0!=0 or TOTAL_CUST_B2!=0 or TOTAL_CUST_B3!=0 or TOTAL_CUST_B4!=0 or TOTAL_CUST_B5!=0 or TOTAL_CUST_B6!=0]?>

No display when dragging regions

Similar Messages

Maybe you are looking for