No double chime after a 10.6.4-10.6.5 system upgrade

Have installed Snow Leopard (10.6.3 I think) over Leopard (10.5.8) and I don't remember getting the double startup chime that usually accompanied a system upgrade/restart. I have since upgraded to 10.6.5 and I don't remember getting that second restart chime either. Is this something that Snow Leopard did away with or should I be worried?
G-N

Lupunus,
Tried your suggestion and then upgraded to 10.6.6 and still only had the one chime. I seem to remember the dual chime with an OS upgrade began around 10.4.7 I believe. The last upgrade I did on my MBP using 10.5 was 10.5.7 to 10.5.8 and I got the double chime at restart. I did not get the double chime when I went from 10.5.8 to 10.6.3 (or 10.6.2) that came in family pack DVD nor have I gotten it with any upgrade in 10.6 since.
Still, should I be worried?
G-N

Similar Messages

Double space after apostrophe in iMessage

Ever since I updated to Mavericks, iMessage on my MacBook Pro (mid 2012) adds a double space after I use an apostrophe! It also doesn't save my background color preference (but it does save font color, font, and other user's font and color). It only shows up for me, not for the person I send the message to.
It looks like this:

Hi,
The Original Poster newer came back with any more info on the subject.
This also left her Balloon (or Background) colour unresolved as well.
In Messages 8 (Mavericks) the Smiley function now uses the Emoji font to create the Smilies.
In iChat versions and Messages 7 you could show the Smiley drop down and mousing over the Smilies would reveal the text keystrokes that would be needed to create it if typing them.
This does not happen with the Emoji Font.
However most of the icons are created by double character info which may mean a keystroke might just be invoking it.
Playing with these settings may provide something.
9:04 pm Saturday; December 21, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Unable to double click after using at line-selection

hi all...
unable to double click after using at line-selection. But if i comment set pf-status, i can double click on the line but on first double click everytime i just get last record i.e. 200th and after second double click i'm not getting output. what is the problem? plz reply...
REPORT YP2 line-count 10(2).
tables: lfa1, LFB1.
data: itab like lfa1 occurs 0 with header line,
JTAB LIKE LFB1 OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS: vendor_n for lfa1-lifnr.
*SET PF-STATUS 'MENU'.
INITIALIZATION.
vendor_n-low = '1'.
vendor_n-high = '200'.
vendor_n-option = 'BT'.
APPEND vendor_n.
clear vendor_n.
At selection-screen.
IF VENDOR_N-LOW < 1.
MESSAGE w000(sabapdocu).
clear vendor_n.
ELSEIF vendor_n-HIGH > 200.
MESSAGE S001(sabapdocu).
ENDIF.
START-OF-SELECTION.
SELECT * FROM lfa1 INTO TABLE ITAB WHERE lifnr IN vendor_n.
WRITE:5 SY-ULINE(72).
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
top-of-page.
WRITE:/5 SY-ULINE(72).
WRITE: /5 SY-VLINE, 'Vendor_code', 20 SY-VLINE, 28 'Name' ,58 SY-VLINE, 60 'Phone', 76 SY-VLINE.
WRITE:/5 SY-ULINE(72).
end-of-page.
WRITE:5 SY-ULINE(72).
WRITE:/ 'THE PAGE NO IS',SY-PAGNO.
WRITE:/5 SY-ULINE(72).
END-OF-SELECTION.
WRITE: /5 sy-uline(72),/ 'THE RECORD IS CLOSED'.
AT LINE-SELECTION.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
WRITE:/5 SY-VLINE,6 'Vendor No.',17 SY-VLINE,18 'Company code',28 SY-VLINE, 29 'Created by',39 SY-VLINE.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
AT PF7.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
AT USER-COMMAND.
IF SY-UCOMM = '0001'.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.

Hi,
copy and paste the code given below it works....
START-OF-SELECTION.
SELECT * FROM lfa1 INTO TABLE ITAB WHERE lifnr IN vendor_n.
WRITE:5 SY-ULINE(72).
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
hide : itab-lifnr.
ENDLOOP.
clear itab.
top-of-page.
WRITE:/5 SY-ULINE(72).
WRITE: /5 SY-VLINE, 'Vendor_code', 20 SY-VLINE, 28 'Name' ,58 SY-VLINE, 60 'Phone', 76 SY-VLINE.
WRITE:/5 SY-ULINE(72).
end-of-page.
WRITE:5 SY-ULINE(72).
WRITE:/ 'THE PAGE NO IS',SY-PAGNO.
WRITE:/5 SY-ULINE(72).
END-OF-SELECTION.
WRITE: /5 sy-uline(72),/ 'THE RECORD IS CLOSED'.
AT LINE-SELECTION.
IF itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
WRITE:/5 SY-VLINE,6 'Vendor No.',17 SY-VLINE,18 'Company code',28 SY-VLINE, 29 'Created by',39 SY-VLINE.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
AT PF7.
IF itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
AT USER-COMMAND.
IF SY-UCOMM = '0001' and itab-lifnr is not initial.
IF SY-LSIND = 1.
SELECT * FROM LFA1 INTO TABLE ITAB WHERE LIFNR = ITAB-LIFNR.
LOOP AT ITAB.
WRITE: /5 SY-VLINE,9 ITAB-lifnr,20 SY-VLINE, 22 ITAB-name1,58 SY-VLINE, 60 ITAB-telf1, 76 SY-VLINE.
HIDE ITAB-LIFNR.
ENDLOOP.
clear ITAB.
WRITE:/5 SY-ULINE(72).
ELSEIF SY-LSIND = 2.
SELECT * FROM LFB1 INTO TABLE JTAB WHERE LIFNR = JTAB-LIFNR.
LOOP AT JTAB.
WRITE:/5 SY-VLINE,6 JTAB-LIFNR,17 SY-VLINE,18 JTAB-BUKRS,28 SY-VLINE, 29 JTAB-ERNAM,39 SY-VLINE.
ENDLOOP.
CLEAR ITAB.
WRITE:/5 SY-ULINE(72).
ENDIF.
ENDIF.
Regards,
Siddarth

Anyone notice a delayed or a missing boot chime after Performance Update?

24-hours into this Performance Update, and I either get a delayed boot chime or nothing at all.
Anyone else?

Having spoken to an Apple product specialist, I have learned that if you have not been hearing the boot or startup chime after having installed the Performance update, download the update again from the following URL, and install it again. This will correct the installation and restore the boot chime.
http://support.apple.com/downloads/
Make sure that you check your graphics selection under Energy Saver in System Preferences, as the Performance update sets graphics to the default setting of Better battery life.

New Pages is double spacing after enter again- can't find the area in inspector that allows you to change paragraph format...help?

New Pages is double spacing after enter again- can't find the area in inspector that allows you to change paragraph format...help?

The "new" Pages is missing just about everything.
Your best best is to go back to the old Pages (mavericks puts in in your applications folder in IWorks.
Apple told me that based on input from users they will add back some missing features back but I suspect that will take a long time if ever.
They (Apple) say they created a new Pages to make it work seamlessly on various devices.
But in doing so they've dumbed down the programs to where they're nearly useless.
Any new users who don't know what "old" Pages could do will probably be satisfied.
But those of us who use this program to do real publishing should send feed back to Apple.
Apple has decided that we are "heavy" users and not representative of the majority of their customers.
That's why I suspect that putting back the features in Pages will not be top priority.
But just in case they really do read the feedback send them your opinions and feature requirements and just maybe if enough people squawk they'll at least put the old Pages back in the App Store (it's gone now).
One possibility crossed my mind. If the new OS Yosemite can mirror devices, perhaps we'll be able to mirror the old pages on to our IOS devices than you could have the full capability of Pages and the connivence of an IPad or IPhone.
Wouldn't that be awesome?
At least in the presentation, it looked like it could work, we'll see.

G5 tower chimes after switch on, fans start and then it switches off, all in about 5 seconds

G5 tower chimes after switch on, fans start and then it switches off, all in about 5 seconds. Does anyone know how to get this mac started?

Use Compressed Air to blow it out good, LCS was the Liquid Cooling System on the last/fastest G5s.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
Using this serial number locator is way better than Chipmunk, and more secure:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
http://www.chipmunk.nl/klantenservice/applemodel.html

Z10 ...no longer able to add contacts after last operating system upgrade

I am Z10 user and after my last system upgrade i can no longer add any new contacts. This is being reported on a number of forums. Is there a fix? If I don't hear back from blackberry by the end of the week I will be dropping blackberry and moving to the Samsung Galaxy 4 or Apple I phone. Blackberry has blown it.

There's no need to double post and cross post in different threads, one is enough and your earlier post has been responded to.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Can-t-add-new-contacts-after-upgrading-to-10-2...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[SOLVED] Xorg terminates after system upgrade

Im lost... Please someone help me.
I upgraded old installation of Arch yesterday (about one year old) and now Xorg fails to load up. I don't really know where to look for issues... I think its graphic card but I'm not sure...
Xorg isnt showing much errors...
# cat /var/log/Xorg.0.log | grep EE
[ 3948.803] Current Operating System: Linux bowman 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:30:23 CET 2014 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3949.345] Initializing built-in extension MIT-SCREEN-SAVER
[ 3951.026] (EE) Server terminated successfully (0). Closing log file.
Warnings:
# cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4198.590] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4198.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4198.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4198.590] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 4198.590] (WW) Disabling Keyboard0
[ 4198.590] (WW) Disabling Mouse0
[ 4199.631] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.632] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.940] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
Log part related to "Unable to support custom viewPortOut" line:
[ 4199.226] (**) NVIDIA(0): Enabling 2D acceleration
[ 4199.626] (II) NVIDIA(GPU-0): Display (LG Electronics W1946 (CRT-1)) does not support NVIDIA
[ 4199.626] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 4199.628] (II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
[ 4199.628] (--) NVIDIA(0): Memory: 524288 kBytes
[ 4199.628] (--) NVIDIA(0): VideoBIOS: 05.44.a2.14.ff
[ 4199.628] (II) NVIDIA(0): Detected AGP rate: 8X
[ 4199.628] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 4199.628] (--) NVIDIA(0): Valid display device(s) on GeForce 6200 at PCI:1:0:0
[ 4199.628] (--) NVIDIA(0): CRT-0
[ 4199.628] (--) NVIDIA(0): LG Electronics W1946 (CRT-1) (connected)
[ 4199.628] (--) NVIDIA(0): DFP-0
[ 4199.628] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): LG Electronics W1946 (CRT-1): 400.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 4199.628] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4199.628] (**) NVIDIA(0): device LG Electronics W1946 (CRT-1) (Using EDID
[ 4199.628] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 4199.629] (==) NVIDIA(0):
[ 4199.629] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4199.629] (==) NVIDIA(0): will be used as the requested mode.
[ 4199.629] (==) NVIDIA(0):
[ 4199.629] (II) NVIDIA(0): Validated MetaModes:
[ 4199.629] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 4199.629] (**) NVIDIA(0): Virtual screen size configured to be 1360 x 768
[ 4199.631] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.632] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.633] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 4199.633] (--) NVIDIA(0): option
[ 4199.633] (--) Depth 24 pixmap format is 32 bpp
[ 4199.646] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
Xorg.0.log: http://pastebin.com/rJDxeXnV
Graphic card is: (lspci -v)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 3504
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Packages installed:
# pacman -Qs nvidia -q
libcl
libvdpau
nvidia-304xx
nvidia-304xx-libgl
nvidia-304xx-utils
opencl-nvidia-304xx
xorg.conf has been automatically generated with nvidia-xconfig:
(only " Virtual 1360 768" has been added)
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.119 (buildmeister@swio-display-x64-rhel04-01) Fri Jan 17 10:35:08 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 1360 768
EndSubSection
EndSection
Any ideas?
[EDIT]
Very important facts:
startx fails when running xfce4 or awesome
startx runs on root (with strange x environment) with no problems
Last edited by marzecki (2014-03-12 13:52:49)

For me it occurred after this update..... I dunno why , but openbox wouldn't load, kde would, however
Guess it's due to the mesa update and using the legacy nvida-173xx driver
[2014-03-12 21:17] [PACMAN] Running 'pacman -Syu'
[2014-03-12 21:17] [PACMAN] synchronizing package lists
[2014-03-12 21:17] [PACMAN] starting full system upgrade
[2014-03-12 21:24] [PACMAN] upgraded bluez-libs (5.15-1 -> 5.16-1)
[2014-03-12 21:24] [PACMAN] upgraded calligra-filters (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:24] [PACMAN] upgraded calligra-libs (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:24] [PACMAN] upgraded calligra-plugins (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:25] [PACMAN] upgraded calligra-krita (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:25] [PACMAN] upgraded libpng (1.6.9-1 -> 1.6.10-1)
[2014-03-12 21:25] [PACMAN] upgraded mjpegtools (2.0.0-4 -> 2.1.0-1)
[2014-03-12 21:25] [PACMAN] upgraded cinelerra-cv (1:2.2-19 -> 1:2.2-20)
[2014-03-12 21:25] [PACMAN] upgraded systemd (210-2 -> 210-3)
[2014-03-12 21:25] [PACMAN] upgraded mesa (10.0.3-1 -> 10.1.0-2)
[2014-03-12 21:25] [PACMAN] upgraded libevdev (0.6-1 -> 1.0.1-1)
[2014-03-12 21:25] [PACMAN] upgraded clutter (1.16.4-1 -> 1.16.4-3)
[2014-03-12 21:25] [PACMAN] upgraded libcups (1.7.1-3 -> 1.7.1-4)
[2014-03-12 21:25] [PACMAN] upgraded cups-filters (1.0.46-1 -> 1.0.48-1)
[2014-03-12 21:25] [PACMAN] upgraded cups (1.7.1-3 -> 1.7.1-4)
[2014-03-12 21:25] [PACMAN] upgraded dhcpcd (6.2.1-1 -> 6.3.1-1)
[2014-03-12 21:25] [PACMAN] upgraded dosfstools (3.0.25-1 -> 3.0.26-1)
[2014-03-12 21:25] [PACMAN] upgraded freetype2 (2.5.2-1 -> 2.5.3-1)
[2014-03-12 21:25] [PACMAN] upgraded geoip-database (20140108-1 -> 20140304-1)
[2014-03-12 21:25] [PACMAN] upgraded gst-plugins-bad (1.2.3-1 -> 1.2.3-2)
[2014-03-12 21:25] [PACMAN] upgraded gstreamer0.10-bad (0.10.23-7 -> 0.10.23-8)
[2014-03-12 21:25] [PACMAN] upgraded gstreamer0.10-bad-plugins (0.10.23-7 -> 0.10.23-8)
[2014-03-12 21:26] [PACMAN] upgraded kdenlive (0.9.6-3 -> 0.9.6-4)
[2014-03-12 21:26] [PACMAN] upgraded keyutils (1.5.8-1 -> 1.5.9-1)
[2014-03-12 21:26] [PACMAN] upgraded libnl (3.2.23-1 -> 3.2.24-1)
[2014-03-12 21:26] [PACMAN] upgraded libssh (0.5.5-2 -> 0.5.5-3)
[2014-03-12 21:26] [PACMAN] upgraded libva (1.2.1-1 -> 1.2.1-2)
[2014-03-12 21:26] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:26] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:26] [PACMAN] upgraded linux (3.13.5-1 -> 3.13.6-1)
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ck
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ck
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
[2014-03-12 21:27] [ALPM-SCRIPTLET] AMD : barcelona, bobcat, bulldozer, kx, k10, piledriver
[2014-03-12 21:27] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
[2014-03-12 21:27] [PACMAN] upgraded linux-ck-p4 (3.13.5-2 -> 3.13.6-1)
[2014-03-12 21:27] [PACMAN] upgraded linux-headers (3.13.5-1 -> 3.13.6-1)
[2014-03-12 21:28] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:28] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Starting build: 3.10.33-1-lts
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Starting build: 3.10.33-1-lts
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:28] [PACMAN] upgraded linux-lts (3.10.32-1 -> 3.10.33-1)
[2014-03-12 21:28] [PACMAN] upgraded linux-lts-headers (3.10.32-1 -> 3.10.33-1)
[2014-03-12 21:28] [PACMAN] upgraded python (3.3.4-1 -> 3.3.5-1)
[2014-03-12 21:29] [PACMAN] upgraded mono (3.2.3-2 -> 3.2.8-1)
[2014-03-12 21:29] [PACMAN] upgraded ruby (2.1.0-2 -> 2.1.1-1)
[2014-03-12 21:29] [PACMAN] upgraded s-nail (14.6.1-1 -> 14.6.2-1)
[2014-03-12 21:29] [PACMAN] upgraded sqlite (3.8.3.1-1 -> 3.8.4.1-1)
[2014-03-12 21:29] [PACMAN] upgraded swt (4.3-1 -> 4.3.2-1)
[2014-03-12 21:29] [PACMAN] upgraded systemd-sysvcompat (210-2 -> 210-3)
[2014-03-12 21:29] [PACMAN] upgraded tzdata (2013i-1 -> 2014a-1)
[2014-03-12 21:29] [PACMAN] upgraded wine (1.7.13-1 -> 1.7.14-1)
[2014-03-12 21:29] [PACMAN] upgraded wireshark-cli (1.10.5-4 -> 1.10.6-1)
[2014-03-12 21:30] [PACMAN] upgraded wireshark-gtk (1.10.5-4 -> 1.10.6-1)
[2014-03-12 21:30] [PACMAN] upgraded xbmc (12.3-11 -> 12.3-12)
[2014-03-12 21:30] [PACMAN] upgraded xterm (302-1 -> 303-1)
Thanks a bunch
Last edited by 1LordAnubis (2014-03-13 02:39:41)

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting r/s. Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas?

After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting ro the repair partition and repairs permissions/drive/verify , with no problems. Tried reseting PVRAM(or whateverit called). Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas? Can still bootcamp into windows.
Thank you

bhadotia wrote:Anyway's the file downloaded from dell to update the partition for Studio 1555 is corrupted (checksums don't match). My partition still doesn't boot. I'm working to fix this and will update my post when I'm done.
The file seems to create the CD/DVD/Image and USB just fine. So I used this only to create a CD image which I then wrote on a blank CD which seems to work fine. Also, I played around a bit and had some partial success in booting the partition. I've updated my original opening post with the new findings.
Whew!! what a waste of time! Never want to do all of this again .
Last edited by bhadotia (2012-03-03 00:05:22)

[solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected

Hi, following this post, I'm seeking help concerning a big problem with my wifi.
In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
Last edited by nugetchar (2014-08-09 20:30:44)

Okay then, here we go :
When I do a
lspci
I have the following output :
[nugetchar@arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
So, as you can see, the Network Controller is the following :
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
When I do a
ip link
this is what I obtain :
[nugetchar@arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
Finally, a
more /etc/modprobe.d/modprobe.conf
gives me the following output :
^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist bcma
blacklist pcspkr
blacklist snd_pcsp
I think I need to unblacklist bcma ?
@ewaller : I just saw you reply, here is the output for ls /lib/modules
[nugetchar@arch ~]$ ls /lib/modules
3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
Thank you for your answers, I really appreciate it

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system.

Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel Boguszewski

UPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer.

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Multiple selection in the ALV is not possible after system upgrade

Hi Colleague,
I had been using an ALV, which was performing as desired before, but recently we had a system upgrade to NW7.0 and after that in this ALV multiple selection of records/rows is not allowed.
The colleagues who upgraded the system suggested that this may be because this ALV is instantiated at many places. I would request you to kindly provide a solution for the same ASAP, as I am not able to proceede ahead.
Warm regards,
Roopesh

Hi all,
Thanks for your replies, I had figured out the actual problem. The reason was, the referance of the selected rows was lost as I was doing bind elements to the context after moving to wddomodify.
So I figured out an alternative solution to avoid binding on selection of records.
Best regards,
Roopesh
Edited by: Roopesh Dolle on Apr 14, 2011 7:04 AM
Edited by: Roopesh Dolle on Apr 14, 2011 7:05 AM

No double chime after a 10.6.4-10.6.5 system upgrade

Similar Messages

Maybe you are looking for