No Drill Down for a keyfigure in the Planning Book

Hi experts
We have 5 key figures in planning book.One among five key figures is Supply information , the data will be in the level of Material and Plant level.
We have 5 Characteristics such as product, Prod Grp, Plant, Region and Customer.
I want to restrict the Supply Information Key figure not to drill down when user drill downs at Customer and Region Level.
How to achieve the above functionality using Macro?
Thanks
Vicky

Hi Sunitha
Sorry for being late reply.
As per your suggestion i created macro and it was working fine when i drill down but when i select keyfigure selection(magnifying glass) and filter some keyfigures in Interactive demand planning system is not showing blank screen without any keyfigures.
When i remove this macro from Level Change, then i can able to use Keyfigure selection.
What is this inconsistency?
My GUI is 720 and Patch 4.
any suggestion?
regards
vicky

Similar Messages

Drill down performance issue in APO SNP Planning Book

We have a requirement where planners would want to do a Details All on the header for 1000+ products in selection.
For a situation where there are 54 products to drilldown to, we get the following performance in seconds.
Time Bkt Profile      180 Days      60 Days     30 Days
Loading                  14           9.98           8.2
Details All                 262            90.18           56
So for a dataview of 180 days, it takes 262 s to do a details all on a selection with 54 products.
We think we have the latest LC (KERNEL    7.5.0    BUILD 044-123-149-413)
We think we have required LC config
liveCache server has 32GB physical memory with 45GB swap space
CACHE_SIZE= 1572864 x 8kb pages ~ 12.5GB
OMS_HEAP_SIZE= 23GB (approx 75% of main memory)
MAXDATAVOLUMES=16, ~ 63GB total
Is there anything we can do to improve the response times further ?

Thanx Charlie.
I will check the notes and let you know.
We are doing a forecasting at the wholeseller,SKU Level.
We have 1 planning area, 1000 WPs, 1000 wholesellers & 800 SKUs for each wholeseller.
Do you think that SEM 4.1 will have any problem in handling data at this level?
For forecasting purpose we are using 3 years of past data at SKU level.

Unable to Drill Down for Report Designer

hellooo...I created a report using a query in Report Designer. My query is having a structure in the row and I'm using this query for the report in Report Designer. After I created this report in Report Designer, I assign this report in Web Application Designer and create a navigation pane to link this report for the drill down function. But I have problem on drill down this report in the web template when i click on this navigation pane for the free char i defined. Eg: when i drill down for the char in the free char under the navigation pane item, I cannot perform the drill down horizontally but can perform drill down vertically. After perform drill down, I don't see the values from that char being displayed in the reports. Just wondering report in report designer cannot have any drill down function? or is my query problem due to the structure i defined? thanks alotttt...

The report designer needs a fixed Column definition ( structures)
In case of drill across this requirement is not fullfilled.
This is not changable and is due to design, sorry.
so you can only drill down.
best regards,
Kai

Drill down for infotypes

Hi,
I made a select-option for the field PA0290-PASSL,
but, but i noticed that i couldn't drill down to the table contents of the pa0290-passl. I thought maybe it has something to do with the table being an infotype. Because the select-option works fine for transparent tables like MARA. Are there any way for me to make a drill down for an infotype table such as the one i mentioned above?
Thanks,
Frank

Hi,
You can use the following code for providing F4help.
types: begin of ty_PASSL,
PASSL type PA0290-PASSL,
end of ty_passl.
data: i_passl type table of ty_passl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PASSL.
Select PASSL from PA0290 into table i_PASSL where .....
w_repid = sy-repid.
w_dynnr = sy-dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'PASSL'
dynpprog = w_repid
dynpnr = w_dynnr
dynprofield = 'PASSL'
value_org = 'S'
TABLES
value_tab = i_PASSL.
IF sy-subrc 0.
ENDIF.
Reward points if helpful.
Thanks and Regards.

IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
Florian

Hi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens

When i try to drill down on Free characterstics in the query where it is di

Hi,
When running the Query, the filter criteria is not coming up when attempting to restrict the Characterstic(Nav.Attri). the filter criteria is not coming up when attempting to restrict the Characterstic(Navi .attri)variable
I was try to drill down on free characterstic in the query,where it was showing not found in the filter values
When i try to do filter say filter the Navigational attribute select filter values where the dialog box appearing with no entries found.The option over there only from infoprovider.
What would the issue?
Edited by: krish aryan on Sep 2, 2008 5:09 PM

Hi,
Since you have given the option as from infoprovider this may be the issue.
try to give from master data in the properties for selections and then see after pressing F4.
Since its a navigational attribute its values are not be populated into the infoprovider and therefore u are not able to see it.
Thanks
Ajeet

Drill Down for multiple tables possible?

Hi,
I have a web report with 3 tabs (Weekly, Monthly, and Quarterly) sales reports.
Is there a way to have a user drill down on any one of the reports and have it also affect/drill down on the remaining reports? I can get the functionality to work if the 3 tables are not in tabs.

are you using 7.0 or 3.x. I guess in 7.0 the Command is not executed against an invisible object. May you can try to to create a command sequence Show the items perfom drill down, and hide items.
best regards,
Kai

Days supply is not populating in the planning book

Hi Experts,
When I select multiple products in the planning book, the value is papulating as total but if I drilled down to individual product then days supply(Key figure) values are not populating in the planning book.
Please let me know if any idea.
Regards,
Hrishi

From what you mention it looks like you do not use the standard SNP Planning Book. Was the macro inactive so that you had to regenerate?
When you move a macro from workbench to level change it should not require to be regerated.
Please check if following macros are active (green) under level change in sequence
Determine Workdays
Layout Attributes
Drill (Level)
Else compare the macros and sequence in the standard SNP Planning Book with the Planning Book you are using.
The Day's Supply (All: Day's Supply) and Determine workdays macros are essential for populating the day's supply keyfigure.
Thanks,
Somnath

Upload data from Excel to the Planning Book

We are on APO 5.1. We have APO DP at the moment. I wanted to test upload of data from Excel to the planning book. I have tried several times. I have been unable to see any changed data in the planning. I do not get ANY errors during the upload. But I cannot see any changes that I made in the excel in the planning book. Please let me know what I am doing wrong. These are the step that I follow.
1. Go to planning book.
2. Short list only one key figure e.g Customer Forecast.
3. Go into Details All mode.
4. Download the file using the "Prepare File for Upload" option.
5. Open the saved Excel.
6. Change the values in the excel , save and close.
7. Upload the excel into the planning book using the upload file option.
I do not get any errors during all these steps. However, when I check to see if the values have been updated, the changes made in the excel are not updated in the planning book.

Hello,
Instead of selecting one key figure in data view, please select all key figures of the planning book and then try all the steps which you have carried out.
please revert after you carry out this.
Regards,
Prafulla

Function module to read/write notes in the planning book

Hi All,
Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
win full points for the answer.
Thanks - Chandan

Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
Thanks,
Somnath

Remove Fixing of cells while exiting the planning book

HI Gurus,
i am looking for a stnadard sap functionality to delete the fixing of cells done by the planners every month. is there any stnadrd macro function which i can use to delete the fixing of cells? the cells may be fixed at an aggregate level or at lowest level of the selection.
is there any standard macro which i can use?
Rgds, Sandeep

Hi Alexander,
that works. however i cannot make the key figure zero because some of my other KFs are getting disaggregated on that specifc KF.
is there any other way to delete the fixing of the cells before exiting the planning book or using a standard function in any macro?
Appreciate any inputs.
Rgds Sandeep

User is unable to view the selection window in the planning book

Hi Friends,
I am able to view the selection window in the planning book.
User is unable to view the selection window in the planning book.
Is it authorization issue or any settings issue?
Please explain me in detail.
With regards,
Balu

HI Balu
Can you check if ''Selection profile" is checked in the ''view selection" option in the top left of the planning book for the user?
you can choose the hide/show the Selection profile tab, planning book/data view and macros tab using that function.
Check if this helps.
Rgds, Sandeep

Start with dates from the past in the planning book

I want to maintain some figures from the last 14 days in the past.
And I want the planning book to show these 14 days, when I open the planning book.
(I do not want to scroll back).
In my Data view i have to define a Time Bucket profile for the future. (system demand)
This profile I has defined with one day.
The Time Bucket profile for the past are 21 days.
When I start the planning book with the view, I see only one column with todays date.
I want to see the past 14 days, and therefore I have to scroll back.
Is it possible to start with the last 14 days?
- By setting the Period information in the Data view tab?
- By other settings?
- By macro?

Hi Per,
You need to go for a developing an ABAP report. The development calls for updating the planning start date in the data view design mode.
You can use function modules /SAPAPO/MSDP_PB_READ_DVIEW and /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB.
So the logic could be as follows:
1. First develop a FM which will determine the planning start date as per your requirements. This has to be with respect to the system date. So this Function module should in effect subtract 14 days from system date and store in a date field.
2. Using the FM /SAPAPO/MSDP_PB_READ_DVIEW, this date can be updated in the data view / PLanning start date field.
3. Using FM /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB, you can save and generate the data view.
After developing the program you need to schedule this in background so that the planning start date is calculated and stored automatically.
You need to take care of one thing though. In case there are any macros developed in the data view/macro book, the start dates for macro execution will be changed as well. You need to tweak those as per your requirements.
Hope this helps.
Regards,
Ashutosh

DP - Sales and Demand Forecast values in the Planning book were increased.

Dear DP Experts,
The Sales and Demand Forecast values in the Planning book were increased. Is there a way to tract who user could have made the changes? Can we view the last change like in the document flows?
Thanks,
Glason

hi Glason
if the values have been changed by the user community, I am not sure if there is a way to find out. However if there is technical flaw in data processing, you can check for the steps as posted in the above post.
We faced a similar issue in our project. We were not able to trace the user ids under which the values were changed. However since we retain the 15 days of back up, we were able to check that the values were changed on a certain date but not the user ids. but we were still able to restore the original values.
As an additional step, we also developed macros to store (in the form of alerts) the exisitng value and the updated value incase the there was a manual change in the Sales forecast and other editable key figures. This ensured that there was a check if there was a manul change. we also ensured that these macros were not executed during the background jobs.
SAP also provides a standard SAP APO Change Monitor add-on which can be used to track chnages to the key figures. Please refer to note 1308968 for further information on the add on.
let me know if this helps.
Rgds, Sandeep

How to reflect consignment stock in the planning book

Hi
I have an issue were I am trying to pull through unrestricted consignment stock to the SNP planning book.
I am only able to view the unrestricted stock, and not the unrestricted consignment stock when I am working in the planning book.
However I am able to see the unrestricted consignment stock in the Product View in APO
(/SAPAPO/RRP3 - Product View).
The key figure we use to reflect physical stock is ATD Receipts in the planning book.
I have included the category type CD in the category group ATR, which is assigned to this key figure ATD Receipts
Please can you assist me with this issue.
Thanx in advance
Keegan

Keegan
It is not enough if you associate the category group with the key figure used to display stock. Go to the location for which you are trying to display stock and in the SNP tab stock category group field give this category group. It should work.
The opening stock gets displayed based on the category group assigned in the location master and if the category group in loc master is blank then all stock categories in the default category group ST1 will get displayed
Thanks
Saradha

No Drill Down for a keyfigure in the Planning Book

Similar Messages

Maybe you are looking for