No driver for Airport Exteme WLAN card working in Windows Vista (32bit)

Hello,
Fairly recently I had an Airport Extreme card installed into my Mac Pro. Of course everything works on the Mac side and the card appears with the following info:
Wireless Card Type: AirPort Extreme (0x14E4, 0x8E)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.35)
Current Wireless Network: XXX
Wireless Channel: 1
Under Windows Vista Ultimate (32bit) the card comes up with the following hardware ids:
PCI\VEN14E4&DEV_432B&SUBSYS_008E106B&REV01
PCI\VEN14E4&DEV_432B&SUBSYS008E106B
PCI\VEN14E4&DEV_432B&CC028000
PCI\VEN14E4&DEV_432B&CC0280
The Leopard DVD does not seem to contain any compatible drivers for Windows using Bootcamp for this card. I am really struggling to find a driver that works. The card is listed as 43XX in OS X, and by the Windows hardware ids it seems to be a 432B? I've tried third party drivers for this Broadcom chipset range and nothing will work and even detect a compatible card installed.
Surely there is a working Windows Vista driver for this Broadcom chipset? Does anyone have any suggestions?
Thanks!

thanks for replying..... I'm using the latest driver from the site X.0004 for the x-fi xtremegamer fatality pro. The Sound card is detected just fine. The card shows up correctly, but its just that there are no sound coming out from any of the line out. If I play an mp3 or a movie, I can see that the bar is moving under "Sound" in control panel. I've tested it using headphones etc. The card itself is fine because I tested it on windows xp, well the store where I bought it from did. So its not a hardware problem.

Similar Messages

  • Driver for HP Laserjet 1012 to work under Windows 7- 64 bit

    Am trying to install a HP Laserjet 1012 to work under Windows 7- 64 bit and at HP Support, could find drivers for Vista -64-bit only.
    I have tried to install this Vista - 64 bit driver and it does not seem to even print a test page.
    Is there some other tweak that I need to make or
        or
    does it mean there will be no driver specifically usable for Win - 7 and I might as well junk the printer?
    Thanks in advance.

    Hi
    Add Printer
    Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction. 
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Is there a driver for the PXI-8310 that works with Windows 7?

    The only one I can seem to find is for XP.

    Hello LouisTI,
    Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
    http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
    If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
    Hope that helps!
    James M.  |  Applications Engineer  |  National Instruments
    James M. | Applications Engineer | National Instruments

  • Working webcam instant on windows vista 32bit and 64bit

    i been try used the driver software from win xp will working on windows vista 32bit you can try it out and now i am going to try win xp x64bit driver for windows vista x64 i will let you know soon cheers Happy New Years to all

    guess the 64bit driver is not working?i can install it with the 64 xp driver, however, vista quits the install because the drivers are not signed..

  • SB Live 5.1 Platinum- The LIVE Drive2 Not Working On Windows Vista 32

    SB Li've 5. Platinum- The? LIVE Dri've2 Not Working On Windows Vista 32BIT?i need halp?tnks

    You mean you get audio at all??Heh. I did hear of Windows Update giving some sort of 2. sound so maybe that's what you have. Since Creative isn't going to do any work on the old Li've series (non-24bit), I suggest you try the latest beta kXProject drivers from the driverheaven.net kXProject forum. 3538l is Windows Vista compatible. Just install it with UAC turned off. Don't know how much is working, but it's possible that your Li'veDri've is one of the things. See for yourself. Better than the basic Microsoft implementation, especially for your 5. speaker support.

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    http://www.nvidia.com/object/7seriestechspecs.html
    Pls visit above nVIDIA web page.
    based on NVIDIA web pages, 7900GTX supports MAC OS X.
    but .....seems not so far.

  • Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

    Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

    Plug a NAS into the BT Hub that does TM. Look at Synology.
    You just use the wireless of the hub.
    But the cheapest solution is still the TC.

  • Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

    Please help.  If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES].     Thx.

    I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

  • Need driver for hp laser jet 4 plus with windows 7

    need driver for hp laser jet 4 plus with windows 7

    Hi,
    A friend of mine uses USB-Parallel cable, he was saying it's ok
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PCMCIA-CAN/2 Series 2 works on windowa Vista?

    Hey ,
              We are using the PCMCIA-CAN/2 Series 2 CAN Card for our application.We are moving to Windows Vista very soon.I was not sure if I can use the same CAN card for the vista operating system?
              I've seen some post about PCMCIA DAQ not working on Vista? is it the same with CAN card too? Details of the CAN card below.
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/1332
    Thanks
    -Vamshi Ainapur
    Solved!
    Go to Solution.

    Hello Vamshi,
    The NI-CAN 2.6 driver supports the PCMCI-CAN Series 2 under Vista x86.  Please note that the PCMCIA-CAN and PCMCIA-CAN/2 interfaces are not supported on the 64-bit version of Windows Vista.  This information is available in the readme file, located on the driver's download page.
    Have a great week.
    O. Proulx
    National Instruments
    www.ni.com/support

  • What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

  • ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

    WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
    THE COMPANY NEEDS TO WARN PEOPLE.  THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

    The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
    Acrobat XI Pro system requirements
    These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
    Windows
    1.3GHz or faster processor
    Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
    512MB of RAM (1GB recommended)
    1.85GB of available hard-disk space
    1024x768 screen resolution
    DVD-ROM drive
    Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
    Video hardware acceleration (optional)
    Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

  • How to get Zen Touch to work on Windows Vista without PFS (worked!)

    CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
    For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
    )Uninstall every piece of Touch software you got and reboot.
    2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
    3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
    4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
    5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
    6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
    If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
    Best of luck. edit: Using Winamp to transfer files worked as well.

    Hi D2xS-Shooter,
    I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
    Creative Cloud is a collection of apps with various different tech specs
    http://www.adobe.com/uk/products/creativecloud/tech-specs.html
    Thanks!
    Eshant

  • Will Elements 10 Item #65136385 work with Windows Vista?

    Will Elements 10 Item #65136385 work with Windows Vista? I found this on Amazon.com but it lists operatingsystems only for Windows 7 and I have Vista 64 bit. Can I use this as an upgrade from Elements 7?
    Thnaks.

    Here is the version that does not list Vista as one of it's compatible operating systems
    http://www.amazon.com/Adobe-65136385-Photoshop-Elements-10/dp/B005MMMT6E
    Am I understanding it right....all versions on PSE 10 should work on Vista (as an upgrade frome PSE 7)?
    Thanks.

Maybe you are looking for