No driver for system speaker dv9823em Vista 32 SP2 D E

No driver for system speaker dv9823em Vista 32 SP2
NO Audio Output Device Istaled ## i instaled KB979482) that help but work 1 day and tan again no voice , i think that is sabtage ,
i talking about Hight definition Conexant Audio , ( Smart Audio Studio 2.23.0.0 not working )
1/ all is fine , but i think System speaker can you update , system said all is fine )) but in finaly you have not driver , and driver is not loaded ,
Hight Definition colector , Hight Definition Audio device ,
if was all ok , Hight Definition Audio device , has driver , 32\drivers\drkm.sys , 32\drivers\Hdaudio.sys , 32\drivers\portcls.sys , 32\sysFxUI.dll , system32/WMALFXGHXDSP.dll
Mirrosoft said that System Speaker need new driver and i must check fabric )) i did https://www.conexant.com/Product/Audio/pchdaudio/Pages/default.aspx
but there is not one file wich has maybe 44 KB before was oem28.inf not working or WiSVHe5.inf
i loosed my DVD i have new as USB Se-208 , but i need Signal , some program saying that i have Signal Audio ,
Problem 2 , if i instaled REALTEK all was fine but in Finaly after 5 min istaling driver he said that have not Diriver fr MEDIA ))))
i think all this problem make Cyberlink , i can delte all HP QUCK due he Cyberlink as all deal in Registry own Directory
if somebody know how make tis deal i need VOICE , if somebody has instaled in dv9823em Unbutu 12.04 multiarch , i will be appy if you send me driver for Ateros , chips , and System Speaker or wirelessN 150 , N10 , i will be happy , maybe UBUNTU will be better , rudolfsindelar AT msn DOT com

3 february 2014
HI ,
Vista 32 , SP 2
SOUND problem :
ACPI x86 based // NO conected
Nvidia n Force PCI managnent // NO conected
Battery disaper in icon screen : i disabled Microsoft ACPI compliant control metod #### not help , is same
2x IDE / ATAPI controllers ( mshdc.inf , ms-driver , // NO conected
Microsoft ACPI compliant Embedded controller   // NO conected
ADM Hyper trasport (tm) configuration   // NO conected
ADM Address MAp configuration   // NO conected
ADM DRAM and Hyper transport (TM) trace mode confioguration // NO conected
ADM MIsceleneous configuration // NO conected
2x PCI Standart RAM Contrller // NO conected
higt precision timer    // NO conected
System bord    // NO conected
3x mother board resource   // NO conected
system speaker    // NO conected
PCI BUS !!!!!!!!!!!!!!!!!! Memory Range C0000000 - FEBFFFFF not available.
Moterhboard : Memory summary : Wrong value reported by BIOS
memory type : DDR2 &isntaled memory 3072 MB , available memory 3007 MB , channels 1 ,
MAXIMUM CAPACITY : 2048 MB [ wrong value ]
maximum memory module size : unknow
Memory slots : 2
Error corection : NON
Belarc Advisor
Board: Quanta 30D1 85.26
Bus Clock: 200 megahertz
BIOS: Hewlett-Packard F.34 03/22/2011
3008 Megabytes Usable Installed Memory
Slot 'DIMM 1' has 2048 MB
Slot 'DIMM 2' has 1024 MB
Bus Adapters
Microsoft iSCSI Initiator
Virtual CloneDrive
HUAWEI Mobile Connect - Bus Enumerate Device
Standard Enhanced PCI to USB Host Controller (2x)
Standard OpenHCD USB Host Controller (2x)
Good news :
Hight definition controller HDudbus    // conected
Hight definition AUdio device HDAudAddService (Media )   // NO conected
Hight definition AUdio device HDAudAddService (Media )   // conected
can you send list from device manager all ##system device ##maybe there is not one ,
i will solve today Memory range but that will be pretty hard task )))
you think that will be good idea for my pc ?? #### To resolve this behavior, disable the ISA-to-PCI routing feature to allow these PC Cards to function in laptop computers:
Start Registry Editor (Regedit.exe).
Locate and click to select the following key in the registry:HKEY_LOCAL_MACHINE \System\ CurrentControlSet\Services\ PCMCIA\ Parameters
On the Edit menu, click New, click DWORD Value, type DisableIsaToPciRouting in the NewValue box, and then press ENTER.
Click to select DisableIsaToPciRouting, click Edit, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor.
is applicable ?
Rudolf

Similar Messages

Should I combine two 1Tb drives into one logical 2Tb drive or use one 1Tb drive for system/apps and move /users to the other 1Tb drive? (I'd like ease of b/u too.)

Hello,
I have two 1Tb drives in my Mini, the first is full and the second one empty. (I've been using the 2nd for Time Machine but the full source from dirve 1 soon has Time Machine complaining.) I am contemplating whether to form one 2Tb logical drive from the two 1Tb drives or segregate their use, i.e. use the first 1Tb drive to hold the system and applications while moving the /users directory tree to the second 1Tb drive?
I'm assuming both are straight forward to do accomplish but have nagging doubts about segregating drive usage, will moving the /users directory tree to the second 1Tb drive:
impact apps which might otherwise expect to see particulat fies and directories in specific user related locations on the system drive;
hinder backing up (by having to setup two separate Time Machine activities)?
Finally, is there a better 3rt option?
Thanks,

Thanks and sorry Allan,
The supplementary questions would arise should I NOT chose to combine the separate drives into a larger logical one but to keep one of the two drives for system/apps and the other for users data... I assumed that segregating drive usagel like this might reult in issues with apps which might expect to see some user directories/files on the same drive as the system/apps. similarly, with two physical drives, I'd be looking to managing separate Time Mchines. (I have a few 2Tb pocket drives for backups.)
Final question - if I do combine into a single logical drive (for system, apps, /users ... the whole lot), would I have any problem getting this logical one working from a Time Machine backup? I ask that this backup was taken from the 1Tb physical drive and now I'd be looking to put it back onto a 2Tb logicl drive.
Thanks,

Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

Hello
Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
Any idea?

hmm... this is strange ?:|
The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
However, the case seems to be clear dont install it if the driver is not designed for your OS.
Regards

Driver for creative web cam vista model no 1100

please send me link or driver for my creative web can vista model no pd 1100 for windows xp
my mail id is [email protected]

samram wrote:
Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
SB0680 : Creative Sound Blaster 5.
http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
Maybe you can install these drivers/software.
jutapa

SSD drives for an "old" Windows Vista laptop

Hi everyone,
I am trying to make a general upgrade for my old computer, which I use at work for (somewhat heavy) data analyses. I am planning on increasing my RAM memory to 8gb (see post here) and now I am wondering if upgrading my internal storage would change something.
Changing my HDD to an SSD would be possible / recommendable? What kinds of SSD can I use in this model? Will I need to upgrade my windows OS too?
Currently I am running XP 32bit (after downgrading from vista) alongside with Ubuntu 64 bit.
I believe Vista and Windows 7 are optimized for SSD (specially 7, as related here) so probably I would need to upgrade to W7 too?
THank you sp much for your help!
Gonzalo
This question was solved.
View Solution.

Vista is not optimized for an SSD natively. I would recommend at least Windows 7 for an SSD. Current Linux kernels also have SSD support (TRIM enabled). You can install any 2.5 inch wide and 7 or 9.5 mm thick SATA SSD. My recommendation is a Samsung Evo 840 or 850 model. Avoid the Crucial MX100 as it has caused a lot of issues reported here for reasons that have not yet been fully explained.
If this is "the Answer" please click "Accept as Solution" so others can find it.

Common Modules Driver for Portege M200 under Vista

I have upgraded my Portege M200 to Vista with relatively few issues - However I am getting error message on the compatibility of the Common Modules Driver - I don't seem to be able to find an upgrade - Any ideas?

>I have upgraded my Portege M200 to Vista with relatively few issues - However I am getting error message on the compatibility of the Common Modules Driver - I don't seem to be able to find an upgrade - Any ideas?
According to you message you have UPGRADED the XP to Vista and I presume you did not perform a clean install of Vista.
This could be the reason why the Common Modules error message appears!
However, maybe Im wrong and you have made a clean Vista installation.
I this case its very important to install the Vista driver and tools in the right order.
The Value added package includes some Tools like TOSHIBA Flash Cards, TOSHIBA Password or TOSHIBA Utilities. All these programs must be installed *After* the installation of TOSHIBA Components Common Driver.
bye

Multiple Hard Drives: one for system & applications, one for backup

I am planning the upgrade of my hard drive setup. Presently, I have only the original 74.53 GB internal drive that came with my June 2004 G5 1.8 dual CPU. I have two goals for the upgrade. First, more hard drive space. Second, a drive for automatic backup. Since I am running OS 10.4.11 and not intending to upgrade to 10.5 at this time for application reasons, I will be using something like Carbon Copy Clone for the backup software (not Time Machine, which requires OS 10.5). My thinking, so far, is to install a 1 TB internal drive for system and another internal or external 1 TB drive for the backup. In perusing the discussions here, it looks like an external drive is always used for the backup. Is this true or would an internal drive work just as well for backup? I want the backup to be as free as possible from any corruption or problems that might arise on the system drive or other computer parts. Does the Firewire or USB connection of an external drive offer a greater amount of freedom from potential corruption as opposed to the direct SATA connection of an internal drive?
I realize that burnt DVD’s offer the greatest amount of freedom from corruption but one doesn’t burn a DVD hourly, daily, weekly or so on. Hopefully, if a problem arises my work underway is residing on the backup drive unaffected. I’m not sure how close in time this can be. I imagine this probably depends on the backup software used and how often the backup is run. I’m not yet fully aware of the options.
For the internal system drive is there any good reason to partition it? I f so, why, and in what way? Do the OS and applications need to reside on the same partition? If not (or better that they don’t), how should a 1 TB drive be partitioned?
Thanks in advance for any suggestions on the best configuration of my hard drive upgrade.

1) The backup drive is best to be external (security from computer failure).
Yes. I am not sure about the "in some ways" my esteemed colleague qualifies.
2) The external backup drive should be connected by Firewire (ability to be bootable & greater speed).
Yes. Just beware that some of the Western Digital models have presented problems. Not the drives themselves but the enclosures. [List of Western Digital bootable and non bootable models|http://discussions.apple.com/message.jspa?messageID=9022456#9022456]
Is a Firewire connected drive any less vulnerable to damage by computer hardware failure than an internal drive?
Yes & no. The yes: I don't know about G5s (they use a different connector from the G4s and earlier with which I am familiar) but in some computers the drives will share the same controller. If the controller goes then all connected drives can be corrupted. The no: Then too, I have had two Firewire drives be corrupted. One was by trying it with a PCI card (not what you're using) that was incompatible with my model computer. The other was when the power source in the enclosure went bad.
This is almost leading me to think that 3 drives would be the best! One internal for OS system & applications (1 TB), one continually connected for auto backup (my original 74 GB), and one (a bootable clone) attached only during occasional backups (2 TB).
The more the better. I usually buy drives in size increments that make sense for my configuration. I have two 120GB internal drives so I bought a 250GB external drive for backup and partitioned it into two so I could just back up one internal to one partition and the second to the other.
I'm perplexed with both your feelings about burnt media. I was not aware of this and fortunately have not experienced problems. However, it is only recently that I gravitated from 700MB CD's to 4.7 GB DVD-RW's for backups. I've been using Maxell
There's backup and there's archiving. Backup is for having a copy of what you're actively using. Archiving is storing stuff that is unlikely to change. Optical media is lousy for backup because files are constantly changing. Backing up a 120 GB onto 4GB media either requires a super organized person or you're spending a day sticking DVDs into your computer.
Optical media is less lousy for archiving, but still not great. Where's the floppy drive on your computer? Where will the DVD drive be in 15 years? It's also a lot faster archiving onto hard drives, and the cost of drives has come down to where the per GB cost is about equivalent of less than high-quality, archival-grade DVDs. Yes, drives change too, but it is also easy to copy from drive to drive. I have items archived on drives that are over 10 years old and as long as I make sure I keep on top of being able to connect those drives to a computer they are usable.
BTW: I tried to quote your messages for this reply, went to "Help" to learn how that is done and found this: "If you want to quote specific text from the original message, click Quote Original to add all the text from the original message to the Message box." I could see no such button "Quote Original". Can anyone please tell me where it is?
There's a '"' icon in the compose window when you type a reply. If I'm doing a lot of quotes (as I did here) I use that, then edit out the bits I don't want. Otherwise I copy and paste the text and add a > before the line to get it to appear in the special format.

Fingerprint reader driver for T42 running vista

where can I download the fingerprint driver for the t42 running vista?, also this is a duel booted laptop I also have xp the error I get with the fingerprint reader in xp is "too Short" does anyone have any suggestions on resolving the too short error?
Thanks, Durrell

Try this one and let us know whether it worked:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70064
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HT201401 how to download driver for iphone 3 GS on Vista

hi,
My Iphone 3GS is blocked on image Itunes with USB.
When i open Itunes and try DFU mode that change any thing.
I dont want to loose data on my iphone.
When i branch the iphone on my PC i have message that windows can not find the driver for Appel mobile device (Recovery)
Please help me,
naima

Unable to download driver for Scanjet 2200c to Vista BusineSs

Win 7 on a31p / need driver for graphics card FireGL7800

All greetings from snowy Russia!
I had to install Win7 on my laptop a31p, in general, I am very pleased with the speed and new features. All the drivers are set automatically, and even managed to get to work the battery icon in the system tray
But there is one big problem: I can not find drivers for FireGL 7800 graphics card
I wrote a request to ATI (now AMD) but ou redirected me to Lenovo, citing the fact that they do not write drivers for these cards.
I would be very grateful for assistance in finding the driver for Win7 or la Vista!
You can write me an email: barmaley.russia @ gmail.com
Solved!
Go to Solution.

Welcome to the forum!
There is NO driver for Vista or W7 when it comes Fire GL 7800 because it's simply considered underpowered to run any of these operating systems.
I've had to tweak the XP driver to get it working under W7, and results were less than spectacular, although not bad for a 7-year old machine.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HP Driver for P1015 Laser Printer

Wondering when HP will have a driver for System 10.5 so I can upgradef rom 10.3.9?
[email protected]

Not to be a wise guy but I don't see a Laserjet P1015. There is a Laserjet 1015. Is this your printer?
http://bizsupport.austin.hp.com/bc/images/support/productInfo/SupportProductImag e/c00386890/c00386890.gif
If it is then contact Apple and see if this printer is included in the July 15th HP Printer Update here:
http://www.apple.com/downloads/macosx/apple/application_updates/hpprinterdriver1 1.html

Driver for vista system

i have microsoft vista 32bit operating system and i need a driver for a hp officejet j6450 all in one printer . is this driver available from hp. if so how do i download it.

Hi:
You can download the full feature software and driver from the link below...
http://support.hp.com/us-en/product/HP-Officejet-J6400-All-in-One-Printer-series/3635376/model/36353...

Windows Vista Driver for Sound Blaster 5.1 P

I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Firefox will not open in Vista SP2 after installing software for a Brother MFC printer.

I have 7 computer network. All the machines are running Vista SP2. I recently purchased a Brother MFC 9325cw, and installed the printer/scanner drivers as well as a program called scansoft paperport on each of the machines individually.
I left out the some of the bulkier aspects of the driver package, namely the brother control center because it seems to eat up a lot ram at start up.
Since I have installed the printer driver on my computers, several of them will not open firefox.
I have tried re-installing firefox on one machine so far to no avail.
Next I will try to re-install the brother software. Has anyone else encountered this problem before?

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

No driver for system speaker dv9823em Vista 32 SP2 D E

Similar Messages

Maybe you are looking for