No drivers installed on windows xp

Hi,
I need help!! i installed windows xp with boot camp. Then i tryed to install the drivers of the mac os dvd.. but somehow it didnt work! i installed the update 2.1 but there were still drivers missing. The drivers missing (yellow in windows hardware):
- Videocontroller (very important)
- Ethernet controller (very important because i cant go into internet..)
- networtcontroller
- SM-Bus Controller
- coprozessor (??)
- Build in isight
- blutooth USB Host controller
i have a macbook 5,1 with Geforce 9400M
thanks a lot

inkenpb83 wrote:
Hi,
I need help!! i installed windows xp with boot camp. Then i tryed to install the drivers of the mac os dvd.. but somehow it didnt work! i installed the update 2.1 but there were still drivers missing. The drivers missing (yellow in windows hardware):
- Videocontroller (very important)
- Ethernet controller (very important because i cant go into internet..)
- networtcontroller
- SM-Bus Controller
- coprozessor (??)
- Build in isight
- blutooth USB Host controller
i have a macbook 5,1 with Geforce 9400M
thanks a lot
Does anything here help? http://www.apple.com/support/bootcamp/
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Similar Messages

Decreased Volume When Drivers Installed With Windows XP Pro

Hi,
I recently installed Windows XP Pro (OEM) SP2, I am using the Sound Blaster Audigy 2 ZS sound card. I installed first "EAX4DRV_AUDIGY2__84_50" driver and then updated to "SBA2_PCWDRV_LB__84_55" driver, however I have experienced a decrease in the volume from my speakers since going from SP to SP2. I have no other Creative software installed for the ZS, I use the controls in Windows XP for other changes to the set up. I am using the Logitech Z680 speakers. Nothing else has changed in my set up except the change from SP to SP2. The onboard sound card is "disabled" in the BIOS. The quality of the sound has NOT changed, it is still excellent.
What would be the possible cause of this decrease in volume?
Many thanks for your suggestions.
Message Edited by jbloggs on 0-6-2005 :2 PM

I'm getting the same problem, and I don't know what to do about it!!! I've updated all of my drivers, but the volume is still not as loud as it used to be.
As you said, the quality is still exceptional, but the volume level is lowered. I can still crank it up pretty loud, but not near as loud as before.
Every once and awhile the volume level will suddenly jump up to an ear shattering level, then back down to where it currently resides... this can really scare you if you have it cranked up at the time.

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed.

No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed using Windows 7.

Having the same issues, any help would be appreciated.

Windows XP hangs on 'spash' screen after video drivers installed on K8N Neo4-F

Hiya folks - got a MASSIVE post for everyone here... Sorry but I think it's necessary... Here goes:
I just upgraded everything in my computer except for the HDD. New case, power supply, etc. I started by copying all important data from my original HDD to a portable USB 2.0 drive. My data is safe, and intact on that drive. So... I formated and repartitioned the oroginal hard drive (1 partition), assembled the system and everything runs perfectly. The problems come later....
The Windows installation is insanely fast and smooth... and the system boots into Windows with no problems after installation is complete. I didn't even need to install the nVidia RAID drivers because windows detects my single SATA drive fine. The First thing I do upon seeing the desktop for the first time is: Install nVidia chipset drivers, then AMD Athlon 64 driver (both latest releases). I then restart and the system boots fine. After Windows starts, I'm asked for display drivers. I click 'cancel', as specified in my ATI installation guide, open up the ATI CD and install the drivers via the ATI autorun setup. At this point, there are no further drivers for me to install and NONE of them have an "!" near them. So I figure everything is A-Okay and restart... BAM!! - Windows hangs on the splash screen. The blue bar moves for about 10 minutes, then stops for 2, then moves for 2, and so on... This will go on FOREVER.
So... I boot into safe mode and uninstall the ATI software/drivers with the help of some other third-party programs, schedule a disk check with CHKDSK and reboot. I startup in Directory Services mode to allow the disk check to complete. No errors and the system restarts on its own (supposed to). Now the system boots in normal mode again, but no video drivers installed. So I download the latest drivers from the ATI website and install them. I restart, and WHAM! -- same problem. At this point I'm thinking "bad video card" so again I go into safe mode, remove drivers, schedule disk check, etc.... restart in Dir Serv mode... "one or more errors found" this time... but that's okay.
After the auto-restart I shut down the computer and unplugged EVERYTHING but the video card, HDD and one stick of RAM... then reset the CMOS, checked battery and PSU outputs (all fine) I then went back into the BIOS to ensure everything is set to 'as safe as possible' and restarted. Again I tried the latest drivers, and again the same problem after restart. So I then booted into safe mode, but left the drivers intactthis time. I scheduled another disk check and restarted again in Dir Serv mode. After system restart I shut the computer down and switched to my other RAM stick and booted... same problem. now I'm DEFINITELY thinking "bad video card" so I plug everything back in the way it's supposed to be, reset CMOS and restart with the Windows CD the drive. I again format the HDD, etc... and install Windows.
Now, with another fresh Windows install, having read multiple tech articles, I thought this could be an issue with the NV SW IDE drivers, so I installed the driver pack minus that driver. I restarted and the system boots fine. Next, I again tried installing the latest ATI drivers, restart, and SLAMMO! -- again the system hangs on the splash screen. So, rather than waste my time with disk checks, etc... I did ANOTHER clean OS install. This time I decided to try installing video drivers BEFORE the chipset drivers... no such luck. I restart and Windows hangs in the usual spot.
NOW, I'm REALLY getting upset and can hardly contain my fists of rage that crave to desimate the computer case and all its internal componets. Time to RMA the video card. I exchange the card for the same type, thinking this will solve my problem, I drive happily home with the new card. Wouldn't you guess it... SAME PROBLEM, on ANOTHER clean OS install!!! Now I'm thinking "bad mobo"? - I don't know because it boots fine and runs fast without video drivers, but it seems to be directly linked to the video card. So... I figure "okay maybe these nForce boards don't like ATI cards"... so I return the Radeon X700 and exchange for a BFG GeForce 6600GT. Yep, you guessed it, STILL the SAME problem!!!
I 'm pretty-sure the problem has got to be with the mobo but I can't be too sure. It doesn't seem too likely because the system boots and runs fine with basic Windows VGA drivers. Also, if I were to try and boot to VGA mode after encountering this problem, that would not work at all either, in any situation, other than after removing the ATI drivers or installing windows without them initially. Right NOW, as we speak, I tried uninstalling the nvidia drivers/software via safe mode, I ran disk check, etc... but the system will no longer boot in normal mode or VGA mode even without the nvidia drivers installed. I've formated the hard drive and am ready to reinstall again if I can find a solution to this problem.
If ANYONE can help me it would be EXTREMELY APPRECIATED! I'm not a dummy when it comes to computers but this is pure MADNESS!!! I couldn't even BEGIN to fit everything else I tried into this forum. I had to sum-it-up, but I will gladly answer any questions from you 'brains' out there and will monitor this site daily. I won't ask the question and disappear never to tell of the solution I may or may not find...
Thanks in advance,
Eilios

Quote from: EdwinGF on 26-October-05, 16:01:40
Hi,
If you only have one Serial ATA Hard Disk, then you don't need the nVidia RAID Driver. This driver is only needed when you set up a Serial ATA RAID Array or a Parallel ATA RAID array. For this you must have two identical hard drives in your PC, for RAID 0 and RAID 1 arrays.
nVidia SATA RAID drivers supports RAID 0, RAID 1, RAID 0+1, and JBOD. When you install at least two Hard Drives, prepare your mainboard to use SATA RAID and
set up the RAID Array style you want to use.
Then you will need to install the nVidia RAID driver, to allow Windows to "See" and use the drives correctly. This is done by pressing the F6 Key, inserting the nVidia RAID Driver disk , and "telling Windows" where to find the driver it needs, at the very beginig of the Windows XP setup process.
However if you install a RAID driver with just one SATA Hard drive, or two SATA hard drives, (this last scenario not set to be used in an array, but as two different use drives, lets say one for OS and one for MP3 Storage), then Windows begins to load, it will load the RAID driver, but since there's no RAID Array, Windows will keep "looking" for an inexistant RAID Array, and if there's no such RAID array, this will take forever.
That's why installing nVidia RAID Driver may hang your system (which as you saw is not really hung), at the Windows Splash Screen, it is just trying to find something that doesn't exitst.
NOTE: nVidia RAID Controller, supports RAID Arrays into both, the Serial ATA channels and the Parallel ATA (IDE) channels too. But for both options, you always need to have at least two identical hard drives installed to build up and use a RAID Array, which can only be seen by the nVidia RAID Driver, for both Serial ATA hard drives and Parallel ATA (IDE) hard drives.
NOTE: JBOD stands for Just a Bunch Of Disks = In this scenario, you can combine hard drives of different brands and/or capacities into one big drive that will be seen by Windows as one drive only.
NOTE: Even if you don't have any RAID array, you must install the nVidia nForce 4 Drivers. You can just leave the nVIDIA SATA Driver check box empty.
Hope this helps
I did not have any RAID or SATA drive in my system, actually these were disabled in BIOS. I had the similar experience though. BTW, why NF4 chiset driver is very important to install if Windows XP drivers can get the job done? Look at my link in the previous post.

HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box.

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

I installed Microsoft Windows 8.1 but i don't know which drivers to install.

Hi, the trial period of the windows 8.1 installed at my HP 14-d003tx Notebook PC expired already so I installed a new windows 8.1 Pro 64-bit OS. I went here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/6529958/model/6753958 to check the drivers to be installed but I got confused because I don't know which is which or which drivers I need to install in my laptop. For example, for the bluetooth and wlan drivers, there are 2 drivers to choose from, MediaTek(Ralink) 802.11 Wireless LAN (WLAN) Adapter and Mediatek 802.11 Wireless LAN Adapter Driver, same for the bluetooth and other drivers. Can you please assist me which drivers is compatible or which drivers do I need to install at my laptop? Or how will I know which drivers I need to install. Thanks!
This question was solved.
View Solution.

Hi:
Please see my reply to your other post at the link below...
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/I-installed-Microsoft-Windows-8...

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Illustrator CC crashes on launch in Windows 8 w/ no wacom drivers installed

Oddly enough, Illustrator CC is crashing about 5 seconds after I launch it, around the time that the little trial window pops up. Obviously I can't see if I even like the software if the darn thing doesn't work. I have no wacom drivers installed which seems to be the issue people with windows were running into. I don't think it's creating a crash log because I can't find it. I'm beyond frustrated with Adobe at this point. Please, please help.

I believe so, but I included some screencaps of the font faces themselves just in case. They're all TTF. No font management. Thanks for the reply.

Installing updated Window 7 drivers on Boot Camp.

My wireless mouse does not work with Windows 7/Boot Camp. Still using a wired mouse.
I have updated boot camp to version 3.1 and have downloaded the file "Windows 7, late 2009 drivers"
The documentation that accompanied the drivers said to load to put the drivers on a flash drive and use the "boot camp assistant" in the utilities file and just follow directions.
There are no options to load just the drivers, it wants to partition the drive just as if Bootcamp had never been installed.
Is there a way to load these drivers after Bootcamp and Windows7 has been installed?

Welcome to the Apple Discussions!
Is there a way to load these drivers after Bootcamp and Windows7 has been installed?
Well that is the issue. You have obviously gotten ahead of the game. This works during the Windows 7 installation process, as is stated in the instructions for using the drivers. So you should follow the process to use the drivers and reinstall Windows 7.
But there is also an entire Apple Discussion forum dedicated to Boot Camp and Windows and whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. They may have a work around and you may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

ScanJet 8270 ISIS/TWAIN Drivers and Utilities cannot be installed on Windows 8.1 64Bit

Hello, I've tried to install all the drivers for my ScanJet 8270 on a Windows 8.1 64Bit System. The standard twain and wia drivers installation worked perfect, but when trying to install the "ISIS/TWAIN Drivers and Utilities" the setup hangs (I'm using version 3.0 from 20 Aug 2014 which is currently the latest one). The setup starts, shows a progess bar while extracting the files, but after that nothing happens. After a while I've took a look into Windows task manager and saw, that the process is still running, but doing nothing (no CPU or other resource usage). On Windows 7 everything worked fine, but not on Windows 8. Although the scanner is advertised to work under Windows 8 and this driver is also listed on the driver downlaod page for Windows 8 it's not possible to get it installed on Windows 8. Is HP not testing the setups before shipping them? What can I do to get this driver to run on my PC? Is anyone out there having the same problems and solved them already? Thanks for your advices Sven

Hello, Thank you for posting your query This looks like there is no action from the software setup after a while on Windows-8. Please try the following steps 1. Open the run prompt in your computer and type "msconfig"2. In the system configuration utility, select the "services" tab3. Check the option " Hide all microsoft services"4. All the Programs, other than Microsoft Windows services would be listed now5. Locate any conflicting programs and uncheck them in the window6. Restart the computer and try to run the installation again Please Note: keep a record of the programs you are unchecking as after the installation you may need to check them back in the same screen Do not uncheck any Microsoft service from the list as it may be critical for your computer's function. If doubtful. Please contact us through chat or phone for further assistance. To contact us through chat: http://www8.hp.com/us/en/contact-hp/chat.html Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted SolutionI work for HP .

Already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without downloads driver again

already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without download driver again

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Coprocessor drivers missing after window 8.1 installed

coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.

morris2672 wrote:
coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.
What program are you talking about? Coprocessor is built into the Processor nowdays...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Nvidia drivers dont install on windows 8

Hi, im trying to install drivers for my gtx 670m vga on windows 8 and its imposible.
With original drivers it says there is no hardware compatible.
With modded inf it recognize card and start install but stop with an error installing the driver.
Using the "i have a disk" method it locates the driver but it says that the driver is missing files or it has a wrong hash.
So, i think my problem is that because i need a modded driver windows recognize it and doesnt let me install, so is there a ways to bypass windows security with drivers install?
if not.
Can anyone send me a valid nvidia gtx 670m BIOS or a way to mod my bios with vendor and subsystem ID to flash to mine so i can install nvidia drivers without mod them?
Thx in advance. I will really apreciate help because right now the only thing that isnt working is my vga.

SOLVED
Just press win+I then select configure PC
Inside that go to general, troublesoting,
And there there is an option to restart without the signature check on drivers
^^

WT8-A32 missisng drivers after clean install of Windows 10

Hi, I wanted to do a full clean install of Windows 10 in my Encore WT8.So I first upgraded it to Windows 10 and then runned the installation via a USB Pen. During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. Thanks

During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10? I tired to install some drivers from the 8.1 version but it complained it was not compatible. My notes about a clean install are in another thread, but you have done 99% of what you need.Just grab the 'intel platform installer' and run it. This will give you a functioning touch screen.The version I used was win8.1 vintage and works without a problem.

No drivers installed on windows xp

Similar Messages

Maybe you are looking for