No drives for automatic optimization

 In server 2012 I goto optimize drives click on "change settings" (for schedule), click on "Choose" (drives) and no drives are listed are listed that can be scheduled for automatic optimization??  I can also optimize the drive
manually, and, to make things more confusing, if I take the drive out and put the same HDD in a Windows 7 box it is listed.
Any ideas?
Thanks,
Kris

I have Server 2012R2 with a Perc H710 Raid Controller.  The drives used to be there.  Now they're not.  The only drive utility I've installed is Macrium Reflect for disk imaging and backup.   This is a Windows  bug.  
I'll use a third party defrag program.  Thanks MS.
Keywords: No drives can be scheduled for automatic optimization No Drives Listed Select the drives you want to optimize on a regular schedule windows 8 windows server 2012

Similar Messages

  • Automatically optimize for battery lifespan charges the batt to 100% in Power Manager settings

    Whats crazy about my system is I did a complete driver update with the lenovo update and I still dont have the option for Automatically optimize for battery lifespan. It never shows in my options please someone help me to get this option so I wont burn out my battery. Here is the link to my screen shot http://screencast.com/t/aOvXEJfLnmSm thank you

    Hi Shaggy2626,
    Thank you for the reply!
    There are no additional settings for that, only thing we have to check with setting the BIOS to factory default. To proceed with that go to BIOS and press F9 to set factory default setting and F10 to save and exit.
    Uninstall the current version which you have installed and download the application from the below link, it might be little older version. But I have checked with my T430 and its working fine for me.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/n14u403w.exe
    Hope this helps!!!
    Do post us back if the issue still persists.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • M5400: Automatically Optimize for battery lifespan?

    Hello mithunr,
    I know you can help me with a clear answer !!!
    I am using since 3 days ago a Lenovo Essential M5400 laptop.
    It looks very nice , all software i found on lenovo website , so its great.
    Because is my first laptop , i do have some questions regarding the battery lifespan, because i am using my laptop like a desktop, all the time the AC adapter connected.
    I am using Power Manger 6 and i set the battery on : automatically optimize for baterry lifespan.
    Did i made the best choice if i am using my laptop as a desktop ??? (for sure i will not use it very often on battery mode)
    I want to say that the battery is fully charged 100% , status : no activity,
    I used only 1 time the battery until 85% and then i plugged in again the AC, and was charged again to 100% and remained like this.
    design capacity 47,52whrs , remaining capacity 47.07whrs - this means 99,05%
    cycle count 2, temperature 27-30.
    I know that is not ok to work with battery 100% charged , but in this way this option : automatically maximize for battery lifespan is ok or not?
    Please help me with this issue , i really dont know what is the better option if i use my laptop as a desktop (ac connected).
    Thank you very much . 
    Moderator edit: Added model to subject
    Lenovo Essential M5400: i3 4000m 2.4 ghz , 4gb ddr3, 500gb+8gb ssh, nvidia geforce gt 740m

    Thanks CBHedricks.
    Normally i am using all the time AC power connected , thats why i did not know which option to select in order to not kill the battery very fast .
    I selected the option "Automatically optimize for battery lifespan" from Lenovo Power Manager 6 -> Battery -> Battery maintenance (advanced options) .
    So, your opinion is that this options is the best for my type of laptop use (ac power connected) ???
    Thanks again .
    Lenovo Essential M5400: i3 4000m 2.4 ghz , 4gb ddr3, 500gb+8gb ssh, nvidia geforce gt 740m

  • Automatically Optimize for battery lifespan works?

    Hi All,
    My current x230 is set to "Automatically optimize for batter lifespan" under battery maintenance. I read that for this settings, it'll set your battery to hover around 80%~ base on Lenovo forum under w530 section. However, i'm always seeing my battery at 100% when AC is plugged in; Remaining capacity: 62.47 wh ; Full charge capacity: 62.47wh. Is it suppose to be lesser? I suppose it not healthy for the battery to be constantly kept at 100%. Any x230 users experiencing this too?
    Would like my battery to last at least 2 years. usage :70% AC plugged in,30% on the go. 
    Thank you!
    PS: Updated to the latest Power manager 6.63.1
    Best Regards
    Solved!
    Go to Solution.

    Hi Iopplm,
    Nice to hear that your concern has been clarified.You can leave it to "Automatically optimize for battery lifespan".
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE

    I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?

    I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
    I didn't see a partition option. Where is that? Just curious.
    Thanks!

  • How Do I use my External Drive for my iTunes Library without adding anything to my Mac's HD?

    I have a new MBP and have transferred all of my music off my old pc (250+ gigs) to a Lacie 1TB thunderbolt external drive.  How do I use the external as my primary itunes library with out using any of my Mac's HD?  I'm new to mac so I have a few more questions...
    1. The initial question above
    2. will this work or will there be extra steps every time I disconnect and connect the external (other than ejecting)?
    3. Will I be able to access it remotely / home sharing?
    4.  Would this work with itunes match?
    Thanks All  !!!

    DevonC wrote:
    I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
    However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
    Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
    Thanks!!!
    There are several ways to do exactly this.
    If you partition the external drive, you can use one partition for TM and the other for anything else.
    Even if you do not partition the drive, you can safely store other data in folders on the drive. Just to not use the folder that TM creates for anything. And it's best not to put files directly on the drive, in my opinion, but use folders for storage.
    Just remember that whatever you put on the drive takes up room from TM and when the drive gets nearly full, TM will start automatically deleting older files from it's own folder.
    I have my Tiger clone on my external TM drive in a separate partition and everything works fine.

  • Time Machine Hard Drive for other uses other than backups

    I use a WD My Studio II, 2 TB Hard Drive.
    Time machine uses the drive as its backup drive, but since the the drive is so big I would like to use it as a general hard drive too. In other words, on a single hard drive, can I have Time Machine backing up my Macbook, as well as use the remaining space to store general stuff that is to big for my mackbook.
    The may seem a little illogical, but bare in mind I have the RAID 1 setting, so the one drive is automatically backed up onto the 2nd 1TB drive.
    I hope this makes sense, and I hope someone has an answer.
    Regards
    H

    you might want to consider partitioning your drive, one for TM backups and one for other stuff.
    see these user tips: http://web.me.com/pondini/Time_Machine/3.html and http://web.me.com/pondini/Time_Machine/6.html
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Migrating music to an external hard drive for access by Windows & Mac

    Hey folks
    I recently migrated my collection of music to an external hard drive by:
    1) changing the iTunes music folder location from the default (Music/iTunes/iTunes Music) to my external hard drive through iTunes Preferences.
    2) Selecting "Consolidate library" from the Advanced drop-down menu.
    Afterwards, I moved my library file to the same parent directory I put my iTunes music folder in on the external (in fact, I moved my entire iTunes folder excl the music folder which was obviously already on the hard drive). When I restarted iTunes I held down OPTION and then chose the library file on my external as the iTunes library file to be used. This was all done on a Mac.
    No problems - all swell. But... I moved the library file to the external because I want to be able to use the external with multiple computers from which I can import music that will automatically be copied to the same folder (the music folder on my external) and managed accordingly. When I tried to open the library from my Windows laptop at home nothing happened. The library file I copied from my Mac had no extension, so I renamed it .itl so the Windows version of iTunes would pick it up, but selecting it as the new library did nothing.
    Q1: Are iTunes library files (I assume always .itl's?) interchangeable between Mac and Windows? If not this might explain why the library didn't load up.
    Q2: Is my method wrong? Is there a different procedure for getting multiple copies of iTunes on different computers and operating systems to all use the same library, saved on an external hard drive, which itself references music from the same external hard drive? Is this goal even possible?
    Q3: Is it possible to have 2 or more libraries for a given installation of iTunes?
    Bonus Q4: How is the album artwork saved? When I consolidated my music on the external, did this move the artwork across with it (integrated with each music file?) or was it still sitting on my Mac hard drive in the Album Artwork directory? I have since moved this folder to my external as well, when I moved the entire directory including library file across, and album artwork is visible when the library is open on my Mac, but I don't know whether its getting the images from the hard drive or the external hard drive.
    Okay last one - I swear! Q5: When I couldn't get the laptop version of Itunes to open my Mac library file, I imported all my music into the default laptop library which references the music files still all located on the external. Considering the 130GB of music I'm dealing with, this took a while, but what took even longer was "Processing album artwork", which dragged on for ages. What is actually happening during this procedure - is iTunes accessing an online database to find the artwork, or is it working with the artwork already processed and saved in the album on the external?
    Thanks very much in advance! Sorry for all the questions but I'd like to crack this thing once and for all.

    The procedure for sharing a library between a Mac and Wintel PC on an external drive is quite simple. I did this myself so that I would have my music available to me when I worked in my lab.
    First before you transfer anything to your external hard drive, the music library on your Mac should already be consolidated. Once that is done, transfer the iTunes folder (./Music/iTunes) to the external drive. Unless your music files are in a folder outside the iTunes folder—for instance, my music files are on a separate, larger volume on my Mac from the iTunes folder that is on the boot volume—copying your iTunes folder will put everything that iTunes needs onto the external drive.
    Now you have two options for using your library on two machines. The first, which I prefer, is to leave your Mac’s iTunes library in place and use the external strictly for the Wintel PC. In this instance, you would need to add the .itl extension to the iTunes Library database file. When you attach your external to the Wintel PC at work and choose the library, your should be taken into iTunes with your music library intact.
    In this instance, your external drive can also serve as a backup of your iTunes library because it is highly improbable that both your external drive and Mac Pro’s iTunes folders will go bad simultaneously. For backup purposes, you will need to place another copy of your iTunes Library database file on the external drive, without the extension, for your Mac; I have had issues with Macs recognizing .itl files. Of note, the content of your library on the external drive will be the same if you need to recover from the external drive, but as the Wintel PC will not update the database file without the .itl extension, any settings you change or playlists you add in Windows will not be transferred to the Mac unless you recover the Mac’s library from the iTunes Music Library.xml file that the PC would have kept current.
    In the second instance, if you wish to run your library off of the external drive for both your Mac and Wintel PC, you would follow the same procedure described above, but you would need to have both an iTunes Library (Mac) and iTunes Library.itl (Windows) database files. Effectively, this would mean that once a change is made on either system, it will not be reflected on the other. As you are most likely to add new songs via your home computer, you will need to replace the .itl file with a copy of the Mac database file whenever you add music, playlists, etc.
    Given the storage capacity of my Power Mac G5 and the logistics involved in managing a library stored solely on an external volume going between a Mac and PC, I find the second option to be more trouble than it is worth. For me, it is easier to maintain my Mac’s iTunes library then copy the iTunes folder over to the external drive overnight when I wish to make any updates (e.g., new content, playlists, etc.) available to my work computer. In the morning, I just add the .itl extension to database file before disconnecting the external drive and taking it to work.
    Now that your first two questions are answered, yes you can have more than one library, but doing so is poor database management. You should have all of your content in a single database and use iTunes to separate content. iTunes already separates music, movies, podcasts, audiobooks, etc., but further division of content is up to the user. iTunes has had playlists and folders for a few versions now, so it is quite easy to organize your library’s content in as simple or complex a folder/playlist structure as you please.
    How album artwork is saved depends on how you acquired your music. Music you purchase from the iTunes Store has its artwork placed into a separate artwork database built in the Album Artwork folder in your iTunes folder. I believe that the same occurs if you allow iTunes to find and import album covers. If you rip CDs or acquire music from other sources, you manually add the artwork, in which case the images are stored in the music files.
    Lastly, when iTunes has to build a library it can take a while. Your library is twice as large as mine and on a slow(er) laptop drive the time to built a library will be excessive. Unless iTunes is crashing or freezing, let it runs its course until the library build is completed. Also, if you have copied your music files to your laptop’s internal hard drive, you should not leave iTunes referencing the external drive. In the worst case, you would want to copy your iTunes folder from the external to the laptop’s internal drive’s default iTunes folder location. Remove the iTunes Library file and allow iTunes on your laptop to rebuild the library from the XML file.

  • Choosing an external hard drive for back up

    This is more for general advice than a specific question. Right now I have my hard drive partitioned and use the second as a backup with Time Machine. It will work for most situations but not all, such as a home fire or break-in (all my photos and music, lost forever!).
    What I want to do is buy an external hard drive for backup and keep it at work. I would then bring it home every few weeks to update, but otherwise not store it in the same place as my computer. That way I would never lose more than a few weeks worth of stuff. So, a few questions, the nature of which will let you know how much of a novice I am at this.
    1) Right now, Time Machine automatically updates once per hour. When I am using the external drive will I be able to set Time Machine up to only update my back up files when I connect the external drive. Is this difficult.
    2) Any suggestions on what kind of external hard drive I should buy, or what features I should look for would be appreciated. I live in a remote area, so something I can get from futureshop.ca would be preferable.
    3) My hard drive is about 280 GB. What size should I buy.
    Advice on any of the above would be appreciated. Also feel free to toss in anything else you think I should know or consider.
    Rgds
    PF

    Snowfog wrote:
    This is more for general advice than a specific question. Right now I have my hard drive partitioned and use the second as a backup with Time Machine. It will work for most situations but not all, such as a home fire or break-in (all my photos and music, lost forever!).
    What I want to do is buy an external hard drive for backup and keep it at work. I would then bring it home every few weeks to update, but otherwise not store it in the same place as my computer. That way I would never lose more than a few weeks worth of stuff. So, a few questions, the nature of which will let you know how much of a novice I am at this.
    1) Right now, Time Machine automatically updates once per hour. When I am using the external drive will I be able to set Time Machine up to only update my back up files when I connect the external drive.
    This is what I am currently doing among 3 different backup disks (1 Time Capsule, a WD500GB, and a Lacie 160GB). You won't have to "set" anything up other than attach the new drive and select it in the TM prefs. Then when your done, reselect your normal TM disk.
    2) Any suggestions on what kind of external hard drive I should buy, or what features I should look for would be appreciated. I live in a remote area, so something I can get from futureshop.ca would be preferable.
    Most any drive will do, as you partition it correctly to begin with.
    *_How Should a Time Machine Hard Disk be Prepared?_*
    For Time Machine to work properly, the hard disk must be formatted “Mac OS Extended (Journaled)” and its’ Partition Scheme should be either GUID or Apple Partition Map.
    Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
    For some, Time Machine begins to perform as expected with a new external hard disk. But then the initial full backup or subsequent incremental backups fail. The user only later discovers the hard disk was still partitioned as Master Boot Record (MBR).
    One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” [http://www.girr.org/mac_stuff/backups.html]
    It’s been recommended by many here that your reserve +at least+ double the size of your primary hard disk, that way Time Machine backups have room to grow as the size of your data grows. Additionally, the more space you give Time Machine the more history it can preserve. The less space you reserve for Time Machine the sooner older backups & deleted items will disappear.
    One poster recommended this regarding multiple partitions: “If you do create multiple partitions (half and half would be a good place to start), make sure you use the first partition for Time Machine, and the second for your own stuff (the first one will be on top in the graphical representation shown in Disk Utility; you'll understand when you see the partition tab). This way, you can expand the Time Machine volume at any later time by deleting the second partition. Disk Utility allows this dynamic re-sizing of volumes, but volumes can only be expanded toward the end of the drive, when a volume that comes after is deleted to create the room.” [http://discussions.apple.com/thread.jspa?threadID=1712437&tstart=0]
    Procedure
    Connect the hard disk you wish to use for Time Machine backups.
    Launch Disk Utility.
    It will appear twice in the pane on the left. (Make sure you recognize that it is different from the 2 icons that represent your Macs' internal drive.) The upper entry represent the device as a whole, including the controller inside. The lower entry represents the hard disk contained within the device.
    Click on the upper icon of the external hard disk.
    Select the "Partition" tab.
    For "Volume Scheme" choose "1 partition". (Choose 2 partitions if you intend on storing other data on the disk besides your Time Machine backups. Ensure that the two partitions have different names.)
    Name the disk.
    Format should be "Mac OS Extended (Journaled)".
    Click "Options".
    Select either GUID or Apple Partition Map. (See above for significance)
    Click "OK".
    Click "Apply". Then click “Partition”.
    Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups. If you chose to create 2 partitions, then select the first partition for Time Machine backups, and the second for additional files/folders.
    3) My hard drive is about 280 GB. What size should I buy.
    Any TM backup drive should be +at least+ twice as large as your Macs internal hard disk.
    Let us know if this resolves your issue.
    Cheers!

  • Can I use one hard drive for two computers?  Newbie here.

    Newbie here.
    I currently use Time Machine for my iMac (Intel)
    I've been using my Macbook Pro (Intel) a lot lately and would like to back it up from time to time as well.
    Can I simply attach the external hard drive to my Macbook Pro and set up Time Machine?
    Can use the external hard drive for both machines?
    Will Time Machine recognized that my Macbook Pro is a separate computer and set up a separate folder on the external hard drive automatically?
    Thanks

    Hi,
    you can use the drive for as many Macs as you like, just make sure it's big enough. Time Machine will create separate folders for your Macs and will "know" which one you're using.
    Björn

  • How do I use my backup drive for non-Time Machine stuff?

    I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
    However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
    Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
    Thanks

    DevonC wrote:
    I haven't set up Time Machine yet because it wants me to completely format my external hard drive, and it seems to want to use it for TM backups exclusively?
    However, I would also like to use it to store stuff that I don't want to keep on my computer, eg tons of photos, videos, stuff from my sister's computer, etc.
    Is there a way to do Time Machine but also use the external hard drive for storage? I don't mind temporarily copying the photos etc that are on there to my computer while I format, so that's not the issue. I just don't want my EHD rendered completely useless to everything else.
    Thanks!!!
    There are several ways to do exactly this.
    If you partition the external drive, you can use one partition for TM and the other for anything else.
    Even if you do not partition the drive, you can safely store other data in folders on the drive. Just to not use the folder that TM creates for anything. And it's best not to put files directly on the drive, in my opinion, but use folders for storage.
    Just remember that whatever you put on the drive takes up room from TM and when the drive gets nearly full, TM will start automatically deleting older files from it's own folder.
    I have my Tiger clone on my external TM drive in a separate partition and everything works fine.

  • Problems with driver for ATI xpress 200

    Hi all,
    this morning I saw that there is KDE4 available. Straight away I installed the packages, run it and it crashed. There was a funny graphical effect just before the crash. This gave me the impression that the problems comes from the graphical driver. I tried the proprietary ATI driver which hangs once kdm is launched. Then I tried VESA which doesn't even start for some funny reason. Eventually I turned to the open source ATI drivers. With them I'm running KDE in resolution 1280x768 which is somewhat strange. So far, I haven't found a solution and think I need a help.
    Here is my xorg.conf
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "ATIScreen" 0 0
    #Screen 0 "VesaScreen" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    EndSection
    Section "Files"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/speedo"
    FontPath "/usr/local/share/fonts"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "drm"
    Load "extmod"
    SubSection "extmod"
    Option "omit xfree86-dga"
    EndSubSection
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "freetype"
    Load "record"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,cz"
    Option "XkbVariant" ",qwerty_bksl"
    Option "XkbOptions" "grp:rwin_toggle"
    EndSection
    Section "InputDevice"
    #Option "Emulate3Timeout" "70"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/input/mice"
    Option "Buttons" "7"
    #Option "Emulate3Buttons" "true"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    #Driver "evdev"
    #Option "Device" "/dev/input/event4"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    Identifier "MyMonitor"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "VESA"
    Driver "vesa"
    EndSection
    Section "Device"
    Identifier "ATI"
    BusId "PCI:1:5:0"
    #Option "MonitorLayout" "TMDS"
    #Driver "fglrx"
    Driver "radeon"
    Option "XAANoOffscreenPixmaps" "true"
    EndSection
    Section "Screen"
    Identifier "VesaScreen"
    Device "VESA"
    Monitor "MyMonitor"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "ATIScreen"
    Device "ATI"
    Monitor "MyMonitor"
    DefaultDepth 24
    SubSection "Display"
    #Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    #Section "DRI"
    # Group "video"
    # Mode 0666
    #EndSection
    And here is the X11 log
    X.Org X Server 1.4.2
    Release Date: 11 June 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux pctotem40 2.6.26-ARCH #1 SMP PREEMPT Thu Jul 24 22:35:56 CEST 2008 i686
    Build Date: 21 June 2008 05:47:59PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 28 17:15:54 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "ATIScreen" (0)
    (**) | |-->Monitor "MyMonitor"
    (**) | |-->Device "ATI"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/Type1,
    /usr/share/fonts/TTF,
    /usr/share/fonts/speedo,
    /usr/local/share/fonts,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81e0a60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5950 card 103c,280a rev 10 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:12:0: chip 1002,4380 card 103c,2813 rev 00 class 01,06,01 hdr 00
    (II) PCI: 00:13:0: chip 1002,4387 card 103c,280a rev 00 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4388 card 103c,280a rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4389 card 103c,280a rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:3: chip 1002,438a card 103c,280a rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:4: chip 1002,438b card 103c,280a rev 00 class 0c,03,10 hdr 00
    (II) PCI: 00:13:5: chip 1002,4386 card 103c,280a rev 00 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4385 card 103c,280a rev 13 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,438c card 103c,280a rev 00 class 01,01,8f hdr 00
    (II) PCI: 00:14:2: chip 1002,4383 card 103c,280a rev 00 class 04,03,00 hdr 00
    (II) PCI: 00:14:3: chip 1002,438d card 103c,280a rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:05:0: chip 1002,5974 card 103c,280a rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:05:1: chip 1002,5874 card 103c,280b rev 00 class 03,80,00 hdr 00
    (II) PCI: 3f:00:0: chip 14e4,167b card 103c,280a rev 02 class 02,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,63), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xd8500000 - 0xd87fffff (0x300000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xc8000000 - 0xd81fffff (0x10200000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 63: bridge is at (0:7:0), (0,63,63), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 63 non-prefetchable memory range:
    [0] -1 0 0xd8200000 - 0xd84fffff (0x300000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 7: bridge is at (0:20:4), (0,7,7), BCTRL: 0x0002 (VGA_EN is cleared)
    (--) PCI:*(1:5:0) ATI Technologies Inc RS482 [Radeon Xpress 200] rev 0, Mem @ 0xc8000000/27, 0xd8500000/16, I/O @ 0x1100/8
    (--) PCI: (1:5:1) ATI Technologies Inc unknown chipset (0x5874) rev 0, Mem @ 0xd0000000/27, 0xd8510000/16
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    (II) Inactive PCI resource ranges:
    [0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    (II) Inactive PCI resource ranges after removing overlaps:
    [0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "extmod"
    (II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 4.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI Radeon X550XTX (RV370) 5657 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
    ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
    (II) Primary Device is: PCI 01:05:0
    (WW) RADEON: No matching Device section for instance (BusID PCI:1:5:1) found
    (--) Chipset ATI Radeon XPRESS 200 5974 (PCIE) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [23] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [24] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [25] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [26] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [28] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [29] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [30] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [31] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [32] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [33] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): MMIO registers at 0x00000000d8500000: size 64KB
    (II) RADEON(0): PCI bus 1 card 5 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5974 (PCIE)" (ChipID = 0x5974)
    (--) RADEON(0): Linear framebuffer at 0x00000000c8000000
    (II) RADEON(0): PCI card detected
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
    (II) RADEON(0): Detected total video RAM=131072K, accessible=65536K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"(II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 400.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=40000
    (WW) RADEON(0): Proprietary connector found, assuming DVI-D
    (WW) RADEON(0): Unknown Connector Type: 8
    (WW) RADEON(0): Unknown DDC Type: 8
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x68, DACType-2, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port1: DDCType-0x68, DACType-0, TMDSType-2, ConnectorType-3
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section MyMonitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (WW) RADEON(0): No External TMDS Table found
    (II) RADEON(0): I2C bus "DVO" initialized.
    (II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M NTSC-J
    (II) RADEON(0): Port0:
    Monitor -- AUTO
    Connector -- VGA
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x68
    (II) RADEON(0): Port1:
    Monitor -- AUTO
    Connector -- DVI-D
    DAC Type -- None
    TMDS Type -- External
    DDC Type -- 0x68
    (II) RADEON(0): Port2:
    Monitor -- AUTO
    Connector -- STV
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    finished output detect: 1
    finished output detect: 2
    (EE) RADEON(0): No connected devices found!
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (EE) RADEON(0): Using VGA default
    in RADEONProbeOutputModes
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 4
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Output VGA-0 using initial mode 1280x768
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.2.0
    ABI class: X.Org Video Driver, version 2.0
    (==) RADEON(0): Assuming overlay scaler buffer width is 1536
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xd8500000 - 0xd850ffff (0x10000) MX[b]
    [1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
    [7] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
    [8] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
    [9] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
    [10] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
    [11] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
    [12] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
    [13] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
    [14] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
    [15] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
    [16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
    [17] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
    [18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [22] 0 0 0x00001100 - 0x000011ff (0x100) IX[b]
    [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [25] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
    [26] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
    [27] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
    [28] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
    [29] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
    [30] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [31] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
    [32] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
    [33] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
    [34] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
    [35] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
    [36] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit c8000000 0 0
    (==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    disable montype: 1
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x08000000
    (II) RADEON(0): MC_FB_LOCATION : 0x3fff3800
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): CP in BM mode
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
    (II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
    (II) RADEON(0): Largest offscreen area available: 1920 x 6989
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x11d0000
    (II) RADEON(0): Will use depth buffer at offset 0x1a9a000
    (II) RADEON(0): Will use 29184 kb for textures at offset 0x2364000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xc8000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8e72000
    (II) RADEON(0): [pci] ring handle = 0xf8e72000
    (II) RADEON(0): [pci] Ring mapped at 0xb38a5000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf8f73000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb38a4000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8f74000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb36a4000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf9174000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xb31c4000
    (II) RADEON(0): [drm] register handle = 0xd8500000
    (II) RADEON(0): [dri] Visual configs initialized
    disable montype: 1
    init memmap
    init common
    init crtc1
    init pll1
    freq: 80140000
    best_freq: 80136923
    best_feedback_div: 291
    best_ref_div: 13
    best_post_div: 4
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    restore common
    restore crtc1
    restore pll1
    finished PLL1
    restore dac
    enable montype: 1
    (WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
    disable montype: 1
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 17
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0x3fff3800 is: 0x3fff3800
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0x41ff4000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
    (II) RADEON(0): MC_AGP_LOCATION : 0x41ff4000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
    (II) RADEON(0): Render acceleration disabled
    (**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (**) Option "dpms" "true"
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Using hardware cursor 0 (scanline 1202)
    (II) RADEON(0): Using hardware cursor 1 (scanline 1204)
    (II) RADEON(0): Largest offscreen area available: 1920 x 6984
    (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 338 x 203
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us,cz"
    (**) Keyboard0: XkbLayout: "us,cz"
    (**) Option "XkbVariant" ",qwerty_bksl"
    (**) Keyboard0: XkbVariant: ",qwerty_bksl"
    (**) Option "XkbOptions" "grp:rwin_toggle"
    (**) Keyboard0: XkbOptions: "grp:rwin_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "IMPS/2"
    (**) PS/2 Mouse: Device: "/dev/input/mice"
    (**) PS/2 Mouse: Protocol: "IMPS/2"
    (**) Option "SendCoreEvents" "true"
    (**) Option "CorePointer"
    (**) PS/2 Mouse: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "7"
    (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
    (**) PS/2 Mouse: Buttons: 11
    (**) PS/2 Mouse: Sensitivity: 1
    (II) evaluating device (PS/2 Mouse)
    (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) PS/2 Mouse: ps2EnableDataReporting: succeeded
    enable montype: 1
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) 3rd Button detected: disabling emulate3Button
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Detected non-DDC Monitor Type: 0
    Would you know what is the problem?
    Many thanks, Jan.

    The problem WAS the languageset.
    This helped
    http://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/

  • VISTA - can;t find device driver for your IPOD - read the solution here!

    It would appear that VISTA is rather stupid when it comes to the Ipod - it can't find the driver for itself. Do the normal autmatic way of trying to find the driver (that doesn't find the device) then look in the hardware device list (control panel) you should see you Ipod listed under other devices with a yellow triangle next to it. Right click this line and select "properties". then click "update device driver". Then, DON'T do the automatic find, instead click "I will choose the device from a list". Click on "storage device" and voila! VISTA now finds a USB mass storage device and installs it - JOB DONE! HOORAY!
    good luck!
    Mark.
    Ipod 5G video colour   Other OS   WINDOWS VISTA ULTIMATE

    When you are prompted to look for a driver input
    C:\WINDOWS\System32 and browse it will find a generic
    volume that fixes it.
    I tried this as well. I can find a Generic Volume (I think it lists SD, MMC- neither of which seem correct), but neither of those helps. iPod still isn't recognized as a drive even in disc mode. I started another thread after not finding this one. I'm not sure why USB Mass Storage device isn't one of the options.

  • Any need to partition hard drives for FCS or CS4 on my new Mac Pro?

    This is my first post here but have learned a lot recently just by visiting various threads. I'm new to Mac and Final Cut Studio so I have a few questions about setting up the system and hard drives. I've read about partitions on hard drives on various sites but I wonder if that is outdated advice at this point. I will be learning FCS and CS4 by working on various SD DV and HDV/AVCHD projects so I want my system flexible but as high performance as I can muster. I will be working mostly in FCP and AfterEffects for a while and do intend to burn blu-ray discs eventually.
    My system is a current Mac Pro quad core with 8gb RAM with current versions of final cut and adobe suites. I will do a clean install with snow leopard. I have a 640gb main drive and I've purchased three 1tb Western Digital black internal drives. I am wondering if I need to partition my main drive because I may want to also run a windows OS eventually for blu-ray playback. The other 3 drives are intended for project files, media/capture and back-up respectively. I don't have the budget for a RAID at the moment. So my questions for this thread are:
    1. Do I need to partition the main drive now or should I wait until I need to do so with boot camp/windows installation later?
    2. If I should partition main drive now, how much should I dedicate for the second partition on the OS drive for eventual windows 7/blu-ray playback?
    3. Should I partition any of the three additional drives?
    4. If I should partition any of those additional drives, how many partitions should I make and what sizes should the partitions be for each drive?
    5. Is my plan for my four drives a sound one for my purposes? (os, projects, media, backup)
    Thanks in advance for any help.

    Hi, and welcome.
    1. Don't partition your system drive until you need to. If you choose to run Windows via Bootcamp, you'll have to, in which case, 150GB will be plenty if all you want to do is playback (may even be overkill). However, you can probably do just as well running Windows under Parallels or VMWare, whch would be my recommendation. Performance is very good, and the ease of moving from OSX to Win makes them very convenient. Parallels (which I know better) automatically resizes the amount of space it needs to meet your usage. You can also run your Parallels virtual machine from somewhere other than your system disk. I imagine VMWare provides similar features. Both are well thought of.
    2. Your disk use plan is OK, with one caveat - if what you're working on is critical to you, you should also have an external backup. With backup on an internal drive, there's a (very small, but definite) risk that, if the Mac Pro hit a disaster, your backup would be lost. I'd suggest an external Firewire 800 or eSATA enclosure and, either another drive, or just use one of the WDs there instead of internally.
    3. Don't partition the other disks either. Just make sure they're formatted MAC OS Journaled (do this via Disk Utility). Another benefit of Parallels/VMWare is they allow Windows to read/write Mac formatted disks.
    Hope that helps

Maybe you are looking for