No drives found during Windows 7 reinstallation on HP 4530s

I have ubuntu installed on my brand new HP 4530s, and Im trying to reinstall windows 7 64-bit (actually dual boot).  Windows 7 does seem to see any hard drives present.   I have tried loading the appropriate driver, Intel(R) Mobile Express Chipset SATA AHCI Controller from here but windows installation still tells me "No drives were found...".  The hard drive works fine with Ubuntu running on it and has passed the hard drive diagnostic test as well.   I spent a while with HP support today to troubleshoot and they were not able to help and are having me send in the laptop to re-image the drive.   I have also tried other copies of windows 7 I have, and no luck.
Has anybody else had this issue?  If so any solutions?
Thanks in advance

It won't let you proceed?
If not, use these HP drivers I zipped up and attached under Attachments below.
I have attached the 32 and 64 bit files.
Use the ones you need.
If that doesn't work, I won't be able to help you because you should not be getting an error like that.
Those are official drivers from Intel and now from Intel/HP.
Attachments:
x32.zip ‏214 KB
x64.zip ‏247 KB

Similar Messages

  • No sound driver found for windows 7

    plssend  link

    Hi:
    Use the Vista 32 or 64 bit driver from your notebook's support and driver page.
    It should work.
    Paul

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
    is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open  Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    I am using follwoing string
     <connectionStrings>
    <add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
     </connectionStrings>
    Guide me What I do?

    Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
    the DSN. It's better if you add a System DSN.
    Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
    driver specified". See this KB article:
    http://support.microsoft.com/kb/942976/en-us

  • Install windows 7 to s110, no CD/DVD driver found

    I just bought Lenovo Ideapad S110 netbook. It already has MeeGoo OS installed but I want to install Windows 7 32 bit. So I made a bootable usb using Windows 7 USB DVD Download Tool and tried to install Windows 7 using my usb. However I have an error "No CD/DVD driver found" I have tried all three usb slots but there still is that problem. All three slots are USB 2.0. Can anyone please help me with it?
    Solved!
    Go to Solution.

    Hello and welcom,
    That error message can also mean that there is a problem with your original Win 7 ISO or the way the USB flash drive was prepared or the copy to USB.  Or perhaps a defective or incompatible USB flash drive. If it is a downloaded ISO, try the download again.
    The way I usually make bootable Win 7 installer is this:  use DISKPART to prep the drive - list, select, clean, partition, format NTFS, set active.  Use 7zip to copy  the contents of a downloaded ISO to the flash drive.  If you're using a DVD, just copy the contents.  In either case use an SP1 DVD.
    Maybe you've already tried this.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

    I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot  boot It and the CD is also in the drive . Please help me  to boot back to Mac book Pro and give me a way to start the key bord .

    Hey rudreshchoubey,
    Thanks for the question. The following resource may help to resolve your issue:
    Boot Camp Installation & Setup Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    If Windows doesn’t install properly
    Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
    Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
    Thanks,
    Matt M.

  • Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode

    Purpose of this post:
    Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
    Why am I writing this:
    I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
    History:
    As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
    How does UEFI works (in a nutshell):
    Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
    Advantages of UEFI:
        It can integrate various drivers this will not require to load during booting so saves time.
        PC can connect to network without OS.
        Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
        Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
        Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
    For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
    Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
    So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
    You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
    Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
    Step by step tutorial:
    1.    In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
    2.    Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
    3.    After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
    and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
    4.    Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
    5.    Now go to the folder W7pro64bit and do the following:
    a.    Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
    b.    Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
    c.    Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
    d.    Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
    e.    Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
    6.    Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
    7.    Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb.  Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
    8.    Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
    9.    Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
    10.    Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
    11.    If everything is done correctly, your computer will boot from the USB.
    12.    Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
    13.    Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
    14.    Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
    15.    When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
    16.    Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
    17.      Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only  basic drivers support.
    Note: if tvsu will fail to work, see this:
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
    It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
    Final words:
    From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
    Have fun!
    abvasili
    Moderator note: changed subject to match new content.  Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

    seanare wrote:
    Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
    In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI.  From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
    Thank you again good sir.
    You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
    abvasili
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

  • No suitable driver found error while connecting to remote IBM DB2 database.

    While trying to connect to IBM DB2 database on a remote location, though the connection was successful from 'Application Resources', following trace could be recovered while performing 'Run' from 'AppModule':
    ERROR:
    (oracle.jbo.DMLException) JBO-26061: Error while opening JDBC connection.
    ----- Level 1: Detail 0 -----
    (java.sql.SQLException) No suitable driver found for jdbc:as400://XX.XXX.XX.XXX;naming=system;libraries=TEST;translate binary=true;prompt=false
    [891] (oracle.adf.model.bc4j.DataControlFactoryImpl.SyncMode = Immediate
    [892] Creating a new pool resource
    [893] BC4JDeployPlatform: LOCAL
    [894] Propertymanager: skipping reload of file and system based properties
    [895] {{ begin Loading BC4J properties
    [896] -----------------------------------------------------------
    [897] BC4J Property jbo.default.language='en' -->(MetaObjectManager) from System Default
    [898] BC4J Property jbo.default.country='US' -->(MetaObjectManager) from System Default
    [899] Skipping empty Property jbo.default.locale.variant from System Default
    [900] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
    [901] Skipping empty Property ConnectionMode from System Default
    [902] Skipping empty Property HostName from System Default
    [903] Skipping empty Property ConnectionPort from System Default
    [904] BC4J Property jbo.locking.mode='optimistic' -->(MetaObjectManager) from Client Environment
    [905] BC4J Property jbo.txn.disconnect_level='0' -->(SessionImpl) from System Default
    [906] Skipping empty Property ApplicationPath from System Default
    [907] BC4J Property AppModuleJndiName='model.AppModule' -->(SessionImpl) from Client Environment
    [908] Skipping empty Property java.naming.security.principal from System Default
    [909] Skipping empty Property java.naming.security.credentials from System Default
    [910] Skipping empty Property jbo.user.principal from System Default
    [911] BC4J Property jbo.simulate.remote='false' -->(SessionImpl) from System Default
    [912] BC4J Property jbo.security.context='oracle.security.jazn' -->(MetaObjectManager) from System Default
    [913] Skipping empty Property jbo.object.marshaller from System Default
    [914] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
    [915] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
    [916] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
    [917] BC4J Property jbo.validation.threshold='10' -->(SessionImpl) from System Default
    [918] BC4J Property jbo.sparse.array.threshold='20' -->(SessionImpl) from System Default
    [919] Skipping empty Property jbo.pcoll.mgr from System Default
    [920] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
    [921] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
    [922] BC4J Property jbo.txn_seq_inc='50' -->(SessionImpl) from System Default
    [923] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
    [924] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
    [925] BC4J Property jbo.domain.date.suppress_zero_time='true' -->(MetaObjectManager) from System Default
    [926] BC4J Property jbo.domain.bind_sql_date='true' -->(MetaObjectManager) from System Default
    [927] BC4J Property jbo.domain.string.as.bytes.for.raw='false' -->(MetaObjectManager) from System Default
    [928] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
    [929] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
    [930] BC4J Property jbo.903.compatible='false' -->(MetaObjectManager) from System Default
    [931] Skipping empty Property JBODynamicObjectsPackage from System Default
    [932] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
    [933] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
    [934] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
    [935] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
    [936] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from Client Environment
    [937] BC4J Property oracle.jbo.usemds='true' -->(MetaObjectManager) from System Default
    [938] BC4J Property oracle.adfm.usemds='true' -->(MetaObjectManager) from System Default
    [939] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
    [940] Skipping empty Property HandleName from System Default
    [941] Skipping empty Property Factory-Substitution-List from System Default
    [942] BC4J Property jbo.project='model.Model' -->(Configuration) from Client Environment
    [943] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
    [944] WARNING: Property jbo.dofailoverset to null
    [945] Skipping empty Property jbo.dofailover from null
    [946] WARNING: Property jbo.envinfoproviderset to null
    [947] Skipping empty Property jbo.envinfoprovider from null
    [948] Skipping empty Property jbo.rowid_am_conn_name from System Default
    [949] Skipping empty Property jbo.rowid_am_datasource_name from System Default
    [950] WARNING: Property jbo.ampool.writecookietoclientset to null
    [951] Skipping empty Property jbo.ampool.writecookietoclient from null
    [952] WARNING: Property jbo.doconnectionpoolingset to null
    [953] Skipping empty Property jbo.doconnectionpooling from null
    [954] WARNING: Property jbo.recyclethresholdset to null
    [955] Skipping empty Property jbo.recyclethreshold from null
    [956] WARNING: Property jbo.ampool.dynamicjdbccredentialsset to null
    [957] Skipping empty Property jbo.ampool.dynamicjdbccredentials from null
    [958] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
    [959] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.common.ampool.DefaultSessionCookieFactory' -->(Configuration) from Client Environment
    [960] WARNING: Property jbo.ampool.connectionstrategyclassset to null
    [961] Skipping empty Property jbo.ampool.connectionstrategyclass from null
    [962] WARNING: Property jbo.ampool.maxpoolsizeset to null
    [963] Skipping empty Property jbo.ampool.maxpoolsize from null
    [964] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from Client Environment
    [965] WARNING: Property jbo.ampool.monitorsleepintervalset to null
    [966] Skipping empty Property jbo.ampool.monitorsleepinterval from null
    [967] WARNING: Property jbo.ampool.minavailablesizeset to null
    [968] Skipping empty Property jbo.ampool.minavailablesize from null
    [969] WARNING: Property jbo.ampool.maxavailablesizeset to null
    [970] Skipping empty Property jbo.ampool.maxavailablesize from null
    [971] WARNING: Property jbo.ampool.maxinactiveageset to null
    [972] Skipping empty Property jbo.ampool.maxinactiveage from null
    [973] WARNING: Property jbo.ampool.timetoliveset to null
    [974] Skipping empty Property jbo.ampool.timetolive from null
    [975] WARNING: Property jbo.ampool.doampoolingset to null
    [976] Skipping empty Property jbo.ampool.doampooling from null
    [977] WARNING: Property jbo.ampool.issupportspassivationset to null
    [978] Skipping empty Property jbo.ampool.issupportspassivation from null
    [979] BC4J Property jbo.ampool.isuseexclusive='true' -->(SessionImpl) from System Default
    [980] BC4J Property jbo.passivationstore='null' -->(SessionImpl) from System Default
    [981] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
    [982] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
    [983] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
    [984] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
    [985] BC4J Property jbo.connectfailover='true' -->(SessionImpl) from System Default
    [986] BC4J Property jbo.datasource_naming_factory='oracle.jbo.server.DataSourceContextFactory' -->(MetaObjectManager) from System Default
    [987] WARNING: Property jbo.maxpoolcookieageset to null
    [988] Skipping empty Property jbo.maxpoolcookieage from null
    [989] WARNING: Property PoolClassNameset to null
    [990] Skipping empty Property PoolClassName from null
    [991] BC4J Property jbo.maxpoolsize='4096' -->(MetaObjectManager) from System Default
    [992] BC4J Property jbo.initpoolsize='0' -->(MetaObjectManager) from System Default
    [993] BC4J Property jbo.poolrequesttimeout='30000' -->(MetaObjectManager) from System Default
    [994] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(MetaObjectManager) from System Default
    [995] BC4J Property jbo.poolminavailablesize='5' -->(MetaObjectManager) from System Default
    [996] BC4J Property jbo.poolmaxavailablesize='25' -->(MetaObjectManager) from System Default
    [997] BC4J Property jbo.poolmaxinactiveage='600000' -->(MetaObjectManager) from System Default
    [998] BC4J Property jbo.pooltimetolive='-1' -->(MetaObjectManager) from System Default
    [999] BC4J Property jbo.qcpool.monitorsleepinterval='1800000' -->(SessionImpl) from System Default
    [1000] BC4J Property jbo.qcpool.maxinactiveage='900000' -->(SessionImpl) from System Default
    [1001] BC4J Property jbo.qcpool.maxweight='-1' -->(SessionImpl) from System Default
    [1002] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
    [1003] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
    [1004] BC4J Property jbo.viewlink.consistent='DEFAULT' -->(MetaObjectManager) from System Default
    [1005] BC4J Property jbo.finder.range.size='DEFAULT' -->(MetaObjectManager) from System Default
    [1006] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
    [1007] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
    [1008] BC4J Property jbo.SQLBuilder='DB2' -->(MetaObjectManager) from Client Environment
    [1009] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
    [1010] BC4J Property jbo.TypeMapEntries='OracleApps' -->(MetaObjectManager) from Client Environment
    [1011] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
    [1012] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
    [1013] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
    [1014] BC4J Property jbo.abstract.base.check='true' -->(MetaObjectManager) from System Default
    [1015] BC4J Property jbo.assoc.where.early.set='false' -->(MetaObjectManager) from System Default
    [1016] BC4J Property jbo.use.findbykey.for.assoc='true' -->(MetaObjectManager) from System Default
    [1017] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
    [1018] BC4J Property oracle.jbo.defineColumnLength='skipDefines' -->(MetaObjectManager) from System Default
    [1019] BC4J Property jbo.jdbc_bytes_conversion='jdbc' -->(MetaObjectManager) from System Default
    [1020] Skipping empty Property jbo.tmpdir from System Default
    [1021] Skipping empty Property jbo.server.internal_connection from System Default
    [1022] BC4J Property SessionClass='oracle.jbo.server.SessionImpl' -->(SessionImpl) from System Default
    [1023] Skipping empty Property TransactionFactory from System Default
    [1024] Skipping empty Property jbo.def.mgr.listener from System Default
    [1025] Skipping empty Property jbo.use.global.sub.map from System Default
    [1026] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
    [1027] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1028] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1029] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1030] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1031] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1032] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [1033] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
    [1034] Skipping empty Property oracle.home from System Default
    [1035] Skipping empty Property oc4j.name from System Default
    [1036] Skipping empty Property jbo.shared.txn from System Default
    [1037] BC4J Property oracle.adfm.useSharedTransactionForFrame='true' -->(MetaObjectManager) from System Default
    [1038] BC4J Property oracle.adfm.joinNewFrameTransaction='false' -->(MetaObjectManager) from System Default
    [1039] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
    [1040] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
    [1041] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
    [1042] BC4J Property jbo.ejb.useampool='false' -->(SessionImpl) from Client Environment
    [1043] Skipping empty Property oracle.jbo.schema from System Default
    [1044] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
    [1045] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
    [1046] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
    [1047] Skipping empty Property ord.HttpTempDir from System Default
    [1048] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
    [1049] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
    [1050] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
    [1051] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
    [1052] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
    [1053] Skipping empty Property ord.rp.codebase from System Default
    [1054] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
    [1055] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
    [1056] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
    [1057] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
    [1058] BC4J Property jbo.security.loginmodule='oracle.security.jazn.oc4j.JAZNUserManager' -->(SessionImpl) from System Default
    [1059] Skipping empty Property jbo.security.config from System Default
    [1060] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
    [1061] BC4J Property jbo.domain.reopenblobstream='false' -->(MetaObjectManager) from System Default
    [1062] BC4J Property jbo.server.retainAssocAccessor='false' -->(SessionImpl) from System Default
    [1063] BC4J Property jbo.groovy.debug='false' -->(MetaObjectManager) from System Default
    [1064] BC4J Property jbo.busevent.suspendpublication='false' -->(SessionImpl) from System Default
    [1065] BC4J Property oracle.adfm.DefaultEventPolicy='NONE' -->(MetaObjectManager) from System Default
    [1066] BC4J Property oracle.adfm.useRootFrameOnly='false' -->(MetaObjectManager) from System Default
    [1067] Copying unknown Client property (user='TESTER') to session
    [1068] Copying unknown Client property (FullProxyInterfaceName='model.common.AppModule') to session
    [1069] Copying unknown Client property (jbo.applicationmoduleclassname='model.AppModule') to session
    [1070] Copying unknown Client property (jbo.jdbc.username='TESTER') to session
    [1071] Copying unknown Client property (BC4JConfigName='AppModuleLocal') to session
    [1072] Copying unknown Client property (DsPasswd='workout') to session
    [1073] Copying unknown Client property (JDBCName='ConnectTo146') to session
    [1074] Copying unknown Client property (DsUserName='TESTER') to session
    [1075] Copying unknown Client property (name='137E06086E5') to session
    [1076] Copying unknown Client property (ApplicationName='model.AppModule') to session
    [1077] Copying unknown Client property (LastUsedConfiguration='AppModuleLocal') to session
    [1078] Copying unknown Client property (password='*****') to session
    [1079] Copying unknown Client property (JDBCDataSource='java:comp/env/jdbc/ConnectTo146DS') to session
    [1080] Copying unknown Client property (jbo.jdbc.connectstring='jdbc:as400:/;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
    [1081] Copying unknown Client property (DBconnection='jdbc:as400://;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
    [1082] Copying unknown Client property (jbo.jdbc.password='*****') to session
    [1083] }} finished loading BC4J properties
    [1084] -----------------------------------------------------------
    [1085] Connected to Oracle JBO Server - Version: 11.1.2.61.83
    [1086] mPCollUsePMgr is false
    [1087] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
    [1088] ViewObjectImpl.mDefaultMaxActiveNodes is 30
    [1089] Default locking mode changed to: optimistic
    [1090] Created root application module: 'model.AppModule'
    [1091] Locale is: 'en_US'
    [1092] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
    [1093] Trying connection: DataSource='oracle.jbo.server.ConnectionPoolDataSource@191d9ad'...
    [1094] Using the oracle.jbo.server.ConnectionPoolDataSource to acquire a connection...
    [1095] Creating a new pool resource
    [1096] Trying connection/3: url='jdbc:as400:/*****' user='TESTER' password='*****' ...
    [1097] DBTransactionImpl.initTransaction: Login failed
    [1098] java.sql.SQLException: No suitable driver found for jdbc:as400:;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
         at java.sql.DriverManager.getConnection(DriverManager.java:602)
         at java.sql.DriverManager.getConnection(DriverManager.java:185)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
         at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
         at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
         at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
         at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
         at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
         at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
         at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
         at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
         at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
         at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
         at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
         at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
         at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
         at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
         at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
         at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
         at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
         at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
         at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
    [1099] A dead application module instance was detected
    [1100] The application module instance was removed from the pool
    [1101] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
    [1102] Resetting AM=AppModule
    [1103] An exception occured during checkout.
    [1104] oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
         at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:207)
         at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
         at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
         at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
         at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
         at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
         at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
         at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
         at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
         at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
         at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
         at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
         at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
         at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
         at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
         at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
         at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
         at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
    Caused by: java.sql.SQLException: No suitable driver found for jdbc:as400://naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
         at java.sql.DriverManager.getConnection(DriverManager.java:602)
         at java.sql.DriverManager.getConnection(DriverManager.java:185)
         at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
         at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
         at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
         ... 32 more
    [1105] JUErrorHandlerDlg.reportException(oracle.jbo.jbotester.ErrorHandler$ExceptionWrapper)
    [1106] UIMessageBundle (language base) being initialized
    Jun 12, 2012 4:38:26 PM oracle.jbo.jbotester.MainFrame exit
    INFO: BC4J Tester exit code(-3)
    Process exited with exit code -3.

    When you use DB2 SQL flavor, the ADF BC use the oracle.jbo.server.DB2SQLBuilderImpl class as an SQLBuilder. This class determines the JDBC driver class name as follows:
    1) If the JBO configuration parameter jbo.sql92.JdbcDriverClass in not empty, then the JDBC driver class name is taken from there;
    2) If the jbo.sql92JdbcDriverClass parameter is empty, then:
    <ul><li>If the JDBC URL starts with "jdbc:db2://", then com.ibm.db2.jcc.DB2Driver
    <li>If the JDBC URL starts with "jdbc:oracle:db2", then com.oracle.ias.jdbc.db2.DB2Driver
    <li>If the JDBC URL starts with "jdbc:datadirect:db2", then com.ddtek.jdbc.db2.DB2Driver
    <li>Otherwise, COM.ibm.db2.jdbc.app.DB2Driver</ul>
    (Have a look at the source of the method DB2SQLBuilderImpl.getJDBCDriverClassName(String url) for more details).
    It is seen from the log in your first post that the parameter jbo.sql92.JdbcDriverClass is empty. As far as your JDBC URL starts with neither of the prefixes specified above (e.g. your URL starts with "jdbc:as400://"), then you should specify the necessary JDBC driver class in the JBO configuration parameter jbo.sql92.JdbcDriverClass. (You can specify it in the AM configuration parameters or in adf-config.xml).
    Dimitar

  • HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

    i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

    Hi wb2009,
    I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
    Boot Camp: Windows installation boots to black screen with blinking cursor
    http://support.apple.com/kb/TS4536
    The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
    There's another article that mentions Windows XP or Vista that may apply.
    Archived - Boot Camp: Start up to black screen after installing Windows
    http://support.apple.com/kb/TS2600
    Thank you for visiting Apple Support Communities.
    Nubz

  • "no drive found" installing w 8.1 on SSD on Flex 2 15

    Dears, I've been going crazy for 1 week, trying and trying everything to make a clean installation of Windows 8.1 64bit on an SSD I bought for my Flex 2 15. I've read thousands of pages of forums, changed 3 different SSDs, but nothing was successfull!(Crucial MX100, Crucial BX100, ADATA SP920SS) every time, during the W8.1 Setup Wizard, it displays "No hard drive found" when I have to choose in which drive to install the OS. My Lenovo Flex 2 15 came with Windows 8.1 pre-installed on a WD hard disk. Please help me.

    solved this issue just......changing the SSD I bought a Samsung 840 EVO and it works correctly. Tried Crucial M550 (listed as compatible on Crucial website), Crucial MX1100, ADATA, but nothing with Samsung no issues.

  • "Errors Found During Burning Process"

    Hi,
    Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
    Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
    Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
    I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
    Any ideas?
    For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
    Appreciate any help you can give me.
    Neil

    Colleagues:
    Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
    Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
    Thanks!

  • D30, 4223-62U, Win7x64, RAID10, No drives found

    New D30, downloaded RAID drivers for Intel C600. Pressing F6 to install drivers during Windows Ult x64 install and driver "Intel C600 Series Chipset SATA Raid" installs but windows displays "No drives were found".
    I've tried changing the BIOS to use SATA RAID and SATA AHCP but to no avail. Raid array is bootable. I'm stumped. I've used Lenovo's drivers and Intel drivers with no luck. I updated the BIOS, too. Any ideas what to try?
    There are 4 500GB HDD I want to raid 1+0.
    Thanks.
    Solved!
    Go to Solution.

    Where are your HDDs connected....SCU ports (blue) or AHCI ports (red/orange)?
    I'm going to assume it's SCU.  If so, all RAID configs on SCU must be set up using the SCU oprom (accessed by hitting CTRL+I during POST when prompted).  Changing the "SATA mode" setting in BIOS setup will only affect the AHCI ports and will have zero effect on the SCU ports.
    Once you set up the RAID in the oprom, then it's just a matter of providing the correct driver for windows during setup to get it to recognize the RAID array.

  • IMovieHD, "No disc burning drive found" and "The movie could not be sent.."

    First post in these subject forums. I am posting the same problem in iDVD and iMovieHD which were from iLife'05, but I won't post there.
    I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
    Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
    This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
    Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
    So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
    File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
    The movie could not be sent to iDVD, because of an unknown error.
    "Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
    Next I tried: File > Burn Project to Disc......and this error comes up.
    No Disc Burning Drive Found
    "If you have an apple-supported disc burner, please check your connections and try again."
    The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
    Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
    Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
    Thanks all for your help in advance. John

    One more addition to this post, I opened DVD Player and got this error "There was an initialization error. A valid DVD drive could not be found (-70012)
    Maybe this will help give someone a clue.

  • No suitable driver found?

    Hey,
    I've been searching this forum for a problem like mine (and I've found a few that are "like" mine, but none that are exactly the same or that will solve my problem).
    First, any information that might be relevant (I really have no idea how much of this is relevant, I am brand new to this):
    I'm using Eclipse and Apache Tomcat 6.0.14.
    I'm trying to set up a JSP page that shows a query from an Access database. I'm working from an example, and I've followed the example to the letter, but it doesn't seem to work for me.
    I have set up a "System DSN" ODBC and linked it to the proper .mdb file (I don't know that I'm using the proper terminology, but what I'm talking about is going to Control Panel > Administrative Tools > Data Sources (ODBC) > System DSN tab under Windows XP).
    This is what my context.xml (in my WebContent\META-INF directory) looks like:
    <?xml version="1.0" encoding="UTF-8"?>
    <Context>
    <Resource name="jdbc-odbc/ExampleDB" auth="Container"
    type="javax.sql.DataSource"
    driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:exampleDSN"
    removeAbandoned="true"
    removeAbandonedTimeout = "20"
    maxActive="8"    />
    </Context> "exampleDSN" is the name of the DSN I set up, and as I understand it, the value of the "name" attribute can be whatever I want, as long as it's referenced correctly in my JSP file.
    Here is the content of my JSP file:
    <?xml version="1.0" encoding="ISO-8859-1" ?>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
    <sql:setDataSource dataSource="jdbc-odbc/ExampleDB"/>
    <%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
    <title>Insert title here</title>
    </head>
    <body>
    <sql:query var="qry_LoanID">
    SELECT LoanID FROM Loan
    </sql:query>
    </body>
    </html>I understand that this won't actually display anything as I have it now, but I'm just trying to get this tiny JSP file to work correctly. That said, here is the error information I am given:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: An exception occurred processing JSP page /cust_login.jsp at line 17
    14: <title>Insert title here</title>
    15: </head>
    16: <body>
    17:      <sql:query var="qry_LoanID">
    18:          SELECT LoanID FROM Loan
    19:     </sql:query>
    20:    
    Stacktrace:
    org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:524)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:417)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    root cause
    javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver found for jdbc-odbc/ExampleDB"
    org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:850)
    org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)
    org.apache.jsp.cust_005flogin_jsp._jspService(cust_005flogin_jsp.java:91)
    org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    root cause
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver found for jdbc-odbc/ExampleDB"
    org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:276)
    org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:159)
    org.apache.jsp.cust_005flogin_jsp._jspx_meth_sql_005fquery_005f0(cust_005flogin_jsp.java:129)
    org.apache.jsp.cust_005flogin_jsp._jspService(cust_005flogin_jsp.java:78)
    org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    note The full stack trace of the root cause is available in the Apache Tomcat/6.0.14 logs.
    Apache Tomcat/6.0.14I hope this is enough information to get some help with my problem. I can't think of any other information I need to include, and I may have included too much already.
    Any help with this problem would be greatly appreciated.

    You probably don't have the Resource defined in your web.xml. Try adding that.
    %

  • ESATA card w/ drive connected causes Windows 7 bootup to hang

    I installed the NewerTech MAXPower eSATA 6G PCIe 2.0 card in slot 2 (PCI Express 2.0) of my Mac Pro (January 2008). My Mac Pro is configured with Mac OS X 10.6.x. It also has 64-bit Windows 7 installed via Boot Camp.
    The NewerTech eSATA card works fine with Mac OS X. However, if an external drive connected to the eSATA card is powered ON at the time I natively boot-up to Windows 7, booting up hangs with the following message:
    Marvell 88SE91xx Adapter - BIOS Version 1.0.0.1003.
    Initializing...
    If the external drive is OFF at the time I boot-up Windows 7, boot-up doesn't hang. I get the following message during bootup:
    Disk Information:
    No hard disk detected!
    Then, my Mac Pro continues to boot up into Windows 7; it does not hang. However, I can't use the drive. If I turn on the drive (a LaCie D2 Quadra 1 TB hard drive) after logging into Windows 7, it is not detected by Windows 7. This is different behavior than with Mac OS X. If my LaCie drive was off when I boot-up into Mac OS X, and I turn on the LaCie drive after logging into Mac OS X, the drive is detected properly and shows up in Finder. I also have the OWC Mercury Extreme Pro Qx2. If I turn it OFF prior to booting into Windows 7 (to prevent a hang), and then turn it back ON after booting into Windows 7, then Windows 7 recognizes the Qx2.
    So, does anyone have any suggestions on how to bootup Windows 7 natively while an external drive is connected? I reported the problem to OWC and they said that their "engineers are working on it", but it's been weeks, and it seems nothing is being done. BTW, I only tried slot 2 on my Mac. Wonder if it will help to try another slot.
    Thanks.

    I haven't had any problems using the card other than Windows 7 bootup hanging if an external drive is connected to the card. Do you think it's a good chance that it's an issue with the external drive having the USB/eSATA/firewire interfaces, and not the card itself? Unfortunately, all my external drives (all of which hang during Windows 7 bootup via bootcamp) have the USB/eSATA/firewire interfaces.
    I did some write tesing (large video files) using the OWC Mercury Elite-AL Pro Qx2 (4 drives in a RAID 5 config), which has a USB/eSATA/firewire interface. Using the eSATA interface, I was getting 202 MB/sec. Using Firewire 800, I was getting 65 MB/sec. So the eSATA was 202/65 = 3.1 times faster than Firewire 800. So, eSATA is certainly desirable to use. Not sure how much better I'd get with an enclosure that has only eSATA, and whether or not I'd get rid of the Windows 7 "hanging during bootup" bug.... Not an easy test to do given how much these external enclosures cost.
    If anyone has any suggestions on alternate eSATA cards that work with Mac OS X SL, Windows 7 (natively via boot camp and via Parallels), let me know. Driverless would be great. I've done a lot of searching around for an ideal eSATA card, but seems that each one has different pros/cons.
    thanks.

Maybe you are looking for

  • XI Adapter LOOP_IN_MESSAGE_ROUTING (Inbound service interface PI- ERP)

    Hello, my scenario: PI is sending some data via XI Adapter to ERP (SAP ECC 6.0). In PI SXMB_MONI shows us LOOP_IN_MESSAGE_ROUTING. Some points: - Proxy is generated and activated in ERP - ERP is type of LOC (application system) - Corresponding Integ.

  • No sound from left speaker headphone out

    Suddenly no sound coming from left speaker through headphone output only. Records in stereo plays in stereo but no sound on left. Tried all the usual suspects ....no luck.  Any suggestions

  • Accessing Files within a jar - Problems.

    So i have the following code in my program and when i goto run the jar file i get NPE's: URL fileURL = getClass().getResource("resources/cfg/portlist");                 BufferedReader portFileBuff = new BufferedReader(new InputStreamReader(fileURL.op

  • NEED HELP! uninstall applications downloaded from ...

    NEED HELP! How can I uninstall downloaded applications from Ovi?

  • HTTP Response 404, Forbidqden Error 403

    Hi We are unable to receive any messages into Integration server. Following are the error messages in log viewer and in the Tool Test Configuration in the Integration Directory. <u>Log Viewer</u> <b>"Transmitting the message to the endpoint http://pi