No drives shown in printer setup utility

Accidently erased printer drive for Hp deskjet 935c, when I went into printer setup utility app there was no drivers displayed even when I hit "more printers" still no divers were shown. I thought somthing wrong with printer setup utility app so I reinstalled it using Pacifist still no change. Need help soon kids on my back to use printer.
Mac OS X (10.4.7) imac 500

That was the next question. I just went through 5 hours of frustration with a new printer and cable on a Canon MP780. The cable was bad. It works great with a good cable.
MJ

Similar Messages

Printer Setup Utility will not allow new driver to be added

I just bought a Canon Pixma MP960, installed the drivers and then downloaded the driver from their website. When I go to add a new driver in Printer Setup Utility--i highlight the MP960 connected thru USB, but the 'add' feature is not lit up. When i have it search for new drivers, it detects a new driver, but when I hit 'add'--Printer Setup Utility "unexpectedly quits" every time. The only drivers in there are beta thingies that do not work w/ my printer.
The Canon tech guy says that there is a problem with my Printer Setup Utility--but i can't seem to find a solution online. I don't know much about macs, but can I update the Printer Utility program or something? help!

Part of the problem might be if you actually have more than one version of the driver for the printer installed on the computer. Check the drivers at Mac OS X disk/Library/Printers/Canon/ and make sure there is only one plugin for the printer. If you have more than one, trash both and download and install only the driver from Canon that is compatible for Mac OS X 10.4.x. After you install the driver, run Repair Disk Permissions using Disk Utility. If you have only one correct printer driver plugin installed, it should work.

Printer setup utility- driver not appearing in list

Hi - I have installed a Canon printer driver (latest version as I checked), restarted my new MacBook (with updated OSX) but the driver does not appear in the list when i try to set printer up. Printer is connected to USB. It is a Canon Pixus iP7500. Latest driver is 4.1.9 - I checked.
I think my question is - how do i get the driver to appear in the Utility's list?
Thanks.

For the Canon PIXMA drivers (or PIXUS in Japan), the Print Using menu is meant to automatically change to Canon IJ Printer when it detects the USB connected printer. If it doesn't change, you cannot manually browse to it like you can for other drivers.
Often the cause of the correct driver not being selected is that the software hasn't installed correctly. Following is some steps that I have used myself and offered to others that has resolved this problem.
1. Open Printer Setup Utility, click on Printer Setup Utility and select Reset Printing System.
2. Close the Printer Setup Utility.
3. Go to Library > Printers > Canon and delete the contents of the BJPrinters folder.
4. Go to Library > Receipts and delete the file Canon iPxxxx xxx.pkg
5. Empty the Trash
6. Restart the Mac
7. Install the latest version of the Canon driver (which you have).
8. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
9. Open Printer Setup Utility. If the printer is not already displayed, click Add.
10. Select the Default Browser view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
11. Click Add to add the printer.
If the Canon IJ Printer doesn't appear automatically then please reply.

Printer driver for lexmark x6570 does not appear in printer setup utility

Hi
I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
Someone help me please!

@YDNA1958
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Laserjet 6p is not recognized in Printer Setup Utility

I bought recently used HP Laserjet 6p printer and connected my PB to it's Apple Talk port via AsanteTalk Box. After I installed the HP 6p printer driver (downloaded from the HP site) I've tried several times to find the printer in the Printer Setup Utility but it doesn't appear on it! I've even downloaded a printer driver for MacOS 9 and tried to print in Classic environment but can't find any HP printer in the Chooser. Is there any solution for this problem?
I'll be very thankful for any suggestions.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

Epson 4800 Ethernet IPP Network Cant Add PRINTER SETUP UTILITY

Greetings!
Any known issues?
Does anyone have this working??
I am having a time TRYING to ADD a new Epson 4800 printer, Epson Ethernet card onto new Mactel laptop and new quad G5 (both 10.4.7).
Epson NetConfig Utility sees the printer and set an IPP address.
However, Apple PRINTER SETUP UTILITY Add IP printer isn't working.
I had qualified Epson support taking me through the steps...he said some issues with the Intel books, but that doesn't explain why the G5 isn't working.
Three hours yesterday and I'm back on it later today...any tips/info appreciated.

Hi all,
I recently bought an Epson Stylus DX4850 and I'll be damed if I get the thing installed on my Intel based Mac! This is driving me mad, I've been told that it is compatable. I've downloaded all the drivers from the Epson website but when I go to add the printer it's not listed. Does this mean that I need to use a different driver or gimp driver?
Any help would be greatly appreciated and would prevent me from going insane!
Many thanks, Jon
Mac OS X - Intel Mac OS X (10.4.7)

CAN'T GET PRINTER TO ADD IN PRINTER SETUP UTILITY

I've recently purchased a Epson DX4850 printer for use on a Mac using 10.3.9. I installed without problem and it worked fine for first 4 days. Then the driver seemed to disappear. I tried to readd through printer setup utility but it came up with message "SERVER ERROR SERVICE UNAVAILABLE". I tried reinstalling, redownloading driver from Epson website, deleting prefernces and reinstalling but it wouldn't work.
I don't get the message anymore but when I try to add printer it says its found printer driver do I want to refresh the screen but then when I click ok nothing happens.
Under Epson USB it's blank and under USB it has Stylus driver with a ? and not installed.
I've had the printer checked and that works fine.
CAN ANYBODY PLEASE HELP ?

Sorry Hirsty I can't help but just to go on the list that I"m having similiar problems with my Canon ip4200. I'm running 10.3.7 and can't even find the drivers even though I've installed them from the disc and then from a download. Still won't show up.

Printer setup utility freezes when I try to add drivers

I have an Epson Stylus Photo RX500 all-in-one printer which worked fine until a few weeks ago. My best guess as to why it stopped working is that I let my hard drive fill up and some data got corrupted/overwritten (I've had numerous problems incuding my System Folder becoming 'unblessed' which necessitated a reinstall).
When I tried to print there were no drivers recognized. If I checked in home>library>printers I could find what appeared to be the driver (Stylus Photo RX500) but opening that would bring up a message it wasn't in my list of printers. Trying to add the printer to the list gave the message that the driver wasn't found. In the Finder the driver was listed as 372KB. In my cloned external HD the same file was listed as 408KB. Copying over the larger file to my internal didn't solve the problem.
I went to the Epson site and found a driver which was only listed for OS10.2 and a driver to Intel Macs (I have a G4 PB). I downloaded the 10.2 driver and installed it (408KB). Now when I open the printer setup utility EPSON USB is listed as an option but when I click on that the utility freezes. I've tried restarting and repairing permissions but still no go.
Yoroshiku onegaishimasu. TIA.

Ohayo gozaimasu,
I saw what was available on the US site, so went to the Epson UK site, where they show one driver for OSX - PowerPC, for the RX500, it's version 1.9b versus the 1.7 on the US site. The driver is a 7.9mb download. Looking at the other English sites around the world, 1.9b seems to be the lastest OSX PPC driver.
The link is http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=19449&data=6D58D 013F2B22854B9450E1814C134D338E0C605169D8D398A3275D13F8B5BB5
Perhaps that will work better for you.

C6180 does not appear in my list of printers in Printer setup utility (mac OS X 10.4.11)

My C6180 was printing slowly so I followed the steps in the forum (unplugging, holding down the buttons, etc. ... Shut down, restart, etc.) Now it doesn't appear in my list of available printers when I try to set up again in the Printer Setup Utility. My software is updated. How to I get it in the list. I've been around in circles and I may have messed up some settings in trying to solve this. I have to print stuff for work. Freaking out a little. Help.

Hello,
Thanks for the post. Murphy's Law, as soon as you really need to print something for work, this happens!! I've pasted a link below that should help you resolve this one. I hope this helps..........GOOD LUCK!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00653122&tmp_task=solveCategory&cc=us&dlc=en&la...
Just in case, below is a link for the drivers should you need to download. There is a Universal Driver that supports MAC OS 10.3/10.4 if you need a quick and dirty......
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=11534...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Printer Setup Utility missing

I just installed Tiger on a G4 1.42 dual Power Mac w/ 1.5 gigs RAM and then updated it to 10.4 via software update and went to setup my Epson Stylus Photo 2200 and noticed that my Printer Setup Utility is missing.
Yikes.
I just downloaded the latest driver from Epson -- and now it shows up as a beta even though it is dated from 2004.
I had a friend send me a copy of Printer Setup Utility from his Tiger 10.4 and it works, but to a point .... It does not correctly name my printer and will not finish any job I send to it.
How can I fix this?

I suggest you reinstall OS X.

Lexmark x4650 Not Added to Printer Setup Utility

I'm trying to set up a Lexmark x4650 as a shared printer on a wireless network. I got one computer set up and it works perfectly. I've tried setting up the second computer, a MBP, and after getting through the whole setup process it says that the printer was not added to the printer setup utility and to launch it and add it manually.
I'm sick of trying to set it up manually. Does anyone know why the setup app might not be working?

Wish I could help. The same model Lexmark is acting strange with me too. I have it wirelessly installed no problem on a windows PC and my wife's MacBook Pro but my plain ol' MacBook 13'' can't find the printer. I have to either plug it in USB or use it shared from the Pro.
Furthermore I have trouble reading the instillation cd. It makes horrible lawn mower pull cord like noises in the drive and only works after ejecting many times. Every other cd seems fine though and neither of the other two computers had trouble with it.
Like you no dice manually either.

"Error:-9672" Printer Setup Utility

Trying to install a Canon Pixma iP6000D via wireless network - getting error message "Error:-9672" -says printer setup utility is not responding/working. Successful installed an HP (direct connection, though).
Confusing to me, since this printer (the Canon) was connected to the wireless network before. Had problems getting it to print, so I deleted the printer and can't re-install it.
Any help or leads are appreciate

I was having the same problem with my HP 3180, MacBook and APE. I googled the error and found this link to some helpful advice that instructs you to uninstall the printer software and select a different built in print driver. It worked for me and took just minutes! hope this helps you too...
http://homepage.mac.com/james.clay/iblog/B894479528/C85535593/E20061014203725/in dex.html

Reinstall Printer Setup Utility on OS 10.3.9

I just upgraded an old iBook with OS 9.2 to 10.3 and then 10.3.9.
In the process of adding a printer, which didn't work at first, I moved all the printer files into trash, including the printer setup utility. (I only realized this after I noticed that the printer drives which I added again are working, but only from the actual manufacturerer's utility, not from the OS).
So now I cannot add the printers?
How can I re-install ONLY the printer setup utility? I used the online software upgrade to get to 10.3.9 - now going back to a lesser OS is not allowed on the HD.
Hope someone knows what to do. So far there wasn't any real solution to similar earlier posts.
Corinna Sager

Use Pacifist to extract the Printer Setup Utility from your computer's install disks and then follow Barbara's suggestion. Following Barbara's suggestion on its own may result in either the utility not being installed or with key parts missing; it might also work as is.
(12801)

Locating my printer setup utility

I dont seem to have a printer setup utility how do i get one to add my new printer to?
did it go the way of my virex when i loaded leopard? cause im getting this error msg to list the new printer in the setup utility and my search provides no printer setup utility. is there a way to get this as a download?

Yes ... here is a list of what I have done:
loaded the driver from supplied disk for printer lexmark x5470
followed directions of error msg and looked for the printer setup utility ... could not find
called lexmark (2ce)
1st time said I needed to down load the driver from their web site, which I did ... no resolution
2nd time they said I needed aforementioned utility and for me to contact Mac
(Mac has no phone support available for me or live online support so here I am at the discussion
boards)
reloaded Leopard ... still did not get a file called printer setup utility ... printer worked briefly and
then back to receiving error message. mainly from printing attempts from the web (only file I
could print from HD was a .tif file. all other .doc or .rtf would not print.)
opened disc utility and verified disc permissions ... some errors related to lexmark then repaired
tried moving the downloaded patch from lexmark around to applications and then to the lexmark
folder its self but nothing seemed to help
Is there not a Mac tech out there that could help?

Printer Setup Utility not working and autostopping jobs for an HP

I have both an Epson Stylus R200 and an HP Photosmart 2570 series all-in-one. the epson prints fine, but the HP doesn't at all. it keeps stopping the jobs i send to the HP. The HP is also a scanner and i can do scans so i know its not a problem with the physical USB connection.
To attempt to fix this problem, i try to open the Printer Setup Utility. I've tried to open the utility 3 seperate ways. 1) from the menu item "utility" in th e HP printer dock item
2) from "Utilities/PRinter Setup Utility
3) from System Preferences "Printing/Faxing>setup printers"
still the utility appears to be running on my dock, and the menus on the top appear (Edit View Printers Windows Help) simply won't drop down and let me use the Utility.
is my Printer Setup Utility COrrupted? if so, where can i find a replacement download without reinstalling Panther?
i searched the apple downloads to no avail.
restarting now.
any help is appreciated. thanks
G3 minitower 370 MHz Mac OS X (10.3.9) [email protected]

thanks for your repsonse greg, however this is not resolved.
ok, i know ive got the 10.3.9 update installed successfully. in fact, i decided to reinstall OS X completely and update from there. this took much time. i backed up all system files manually and erase and installed OS X. i am having multiple problems still as a result, such as dreamweaver m not booting, but that goes beyond the scope of this help thread.
but, i can finally open the Printer Setup Utility. i did not find my old R200 drivers so I reinstalled the R200 driver. I also ran the HP all-in-one software. now, whats left to do is add these two printers in the utility.
When i select from the add printer dialogue, "EPSON USB" it find the R200 driver, then i try to select "add" and it gives me this error: "An error occurred while trying to add the selected printers successful-ok-conflicting-attributes"
when attempting to add the HP all in one to the utility, it won't even find the HP driver. Before i re-installed the HP all-in-one software, it had found it but gave me the exact same error as above. also in the add new printer dialogue the menu item that should say "USB" is just blank, and when i select what should say "usb" anyway, it.
i deleted two files in the Library/Preferences/ folder that started with com.apple.print they appeared to be default configuration files. after rebooting the utility, the same problem persists.
any other suggestions? now i can't print at ALL.
G3 minitower 370 MHz Mac OS X (10.3.9)

No drives shown in printer setup utility

Similar Messages

Maybe you are looking for