No DV Device Detection

I'm using FCP 5.0.4 and the latest OS X and QT upgrades and neither FCP nor System Profiler are seeing my DV devices hooked up to either of the Firewire ports on my PowerMac Dual G5. I have my cameras on VTR mode and all that. It's always worked, before the latest upgrades. However, I tried the solutions posted here, like rebooting, reconnecting, connecting only one device at a time, trashing the preferences, and the Apple-recommended manual reinstallation of QT. NOTHING HAS WORKED. Please help! This is very frustrating. I spent tons of money to switch to Apple BECAUSE simple issues like this weren't supposed to be an issue with their stuff. It's very dissappointing to find that's not the case. Thanks in advance for your help, board members!
PowerMac G5 Mac OS X (10.4.5) Equipment tried seperately: Canon GL2, Panasonic PV-GS250, DAC-100 (AV to DV Converter)

If profiler is not picking up the device (only ONE video firewire device should be connected at a time) then you have either:
a. bad firewire cable
b. bad firewire port(s)
c. need to reset the firewire on the machine.
If you have tested a & b, try unplugging all firewire cables from the machine.
Reset the PRAM and reboot.
Shut down the machine an let is sit for a few minutes - now is a good time for a Harpoon solution.
With everything turned off - do the following steps in this order;
- plug in the firewire cable to one camera and the computer
- turn on the camera
- turn on the computer
- launch FCP
Good luck.
If this doesn't work, you may have a fried firewire connection in your computer.
x

Similar Messages

Xorg-No Device Detected-ATI Radeon [solved]

I keep getting errors while trying to start the X server- EE No Deviced Detected. I'm usting a dell inspiron 600m laptop with an ATI Radeon 9000 mobility.
I used the fglrx driver which loaded perfectly, it's just not working when i start X.
Here is my /var/log/Xorg.0.log
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux derek-laptop 2.6.21-ARCH #1 SMP PREEMPT Sun May 6 18:33:47 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 2 21:02:08 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(WW) Option "XkbLayout" requires an string value
(WW) Option "XkbVariant" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1028,01be rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,01be rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,01be rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,01be rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,01be rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1028,01be rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,01be rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 14f1,5422 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c66 card 1028,01be rev 02 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,170c card 1028,8127 rev 02 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 1217,7113 card d001,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 1217,7113 card d801,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:03:0: chip 8086,4223 card 8086,1020 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf6000000 - 0xfbffffff (0x6000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x50000000 - 0x57ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x50000000 - 0x53ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:1:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[1] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x54000000 - 0x57ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 [Mobility FireGL 9000] rev 2, Mem @ 0xe8000000/27, 0xfcff0000/16, I/O @ 0xc000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[1] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[2] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[3] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[4] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[5] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[11] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[13] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[21] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[1] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[2] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[3] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[4] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[5] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[11] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[13] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[21] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[5] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[6] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[7] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[8] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[9] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[16] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[17] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[18] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[21] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[25] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[26] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[27] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.37.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.37.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.37g1
(II) ATI Proprietary Linux Driver Build Date: May 25 2007 14:25:03
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.37.1.1.2.3-driver-lnx-x86-x86_64-346145
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
and my /etc/X11/xorg.conf:
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "aticonfig-Device[0]"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by DrRootabega (2007-07-03 02:58:08)

I think Flgrx simply does not support cards that are that old anymore. Use an older version or use xf86-video-ati which probably will be the better choice for you card anyways.
Last edited by kth5 (2007-07-03 01:37:02)

TS1363 Error message for my ipod touch, ipad and Nano. they all say the same thing " there has been a device detected, but cannot be identified properly. please disconnect and re-connect ipod properly". i have done all it asks, and still nothing help.

can anyone help me try to figure out whyall 3 of my devices jsut stopped beign acceptd on my itunes? ipod touch, nano 6th gen and ipad. none of them will be read on my itunes, yes i have uninstalled and re installed my itunes and plugged and unpluggd the devices and i have reset them numerous times. so what next?

Doublechecking. In the course of your troubleshooting to date, have you worked through the following documents?
iPod nano: Error message saying that iPod 'could not be identified properly'
iOS: Device detected but not identified properly on iTunes for Windows

DV7 - Error 03F0 - No Boot Device Detected - Passes both Memory and HDD Test

Hi there,
My DV7 will not boot up at all. When powered on, I see the HP loading screen briefly, then into "dos type" font saying "No Boot Device Detected - Error 03F0"
I have run both the memory test and hard drive test from the diagnostic menu and both come back ok.
A little more history on the Device/Problem;
2 months ago it was shutting itself off due to overheating - After a good cleaning, the temps cooled down enough that it was no longer shutting off.
I am currently in India, plugging directly into outlets (230v power) using an adapter. 10 days ago there was a small spark at the outlet leaving a very small spot on one of the prongs of the adapter. There was no power flicker, and it wasn't a surge, just almost like a bad connection sparking. This "spark" seemed to have killed my charger immediately. I used the battery until nearly dead, purchased a new charger, but when I returned and tried the new charger, it would not charge, nor power on. When plugged in, at this point, the power/charging light on the side was lit, but not on the front. I used a pin to open the CD drive, and the front light lit up, but it still would not power on.
I took it to a repair shop here in India, and they managed to get it so it would power on (not sure how), but that has only brought me to where I'm at right now with the Error. They said "It worked, and then we tested again and it didn't work and now it no work".
My current BIOS edition is F.46.
Essentially I'm wondering if I'm screwed - and if I'm not, then what can I do to trouble shoot/fix it?
P.S. Finding parts in India that are specific to my computer will be near impossible with the technology differences. Also, dealing with local techs is extremely difficult so I'll need to know
P.S.S. I just tried to power it on again to double check the accuracy of my post and it will not power on, nor can I get the CD drive open again....

Is the unit still in warranty?
Based on the description of the behavior, it does sound a hardware issue beyond the hard drive.
Was the AC adapter that was purchased an HP adapter? I know you said it is difficult to get the right parts in your area, but I want to confirm if it is an HP adapter or aftermarket.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Solution Centre in Win 8.1 keeps runs device detection on every use

New Win 8.1 notebook. Connected the OfficeJet Pro 8500A A910g by USB. Windows detected and loaded printer driver, also loaded network driver as printer connected via wireless. Disconnected USB cable. Downloaded and installed HP full software package. It went through device detection, wirless, could not find printer, gave it the IP address, it then found it OK. Went through all steps including opening an HP web page to sign up for something. It created desktop shortcut and enabled scan over network. Can scan from device to PC, works just fine. Next time I wanted to scan from PC, double click on desktop shortcut, UAC pops up, say OK can make changes. Goes through device detection agian. Eveything works. Closed Solution Centre. Re-opened it and same thing. Every time I want to use the Solution Centre I have go through teh detection process. I tried running the .exe directly from Windows Explorer so there are no switches in the command line, no change. There must be a fix.

Hi,
Please try following the steps below and let me know if that helps:
From the Control Panel go to View devices and Printers.
Right click the HP Officejet Pro 8500A and select Remove Device, next unplug the USB,
from the start menu's search bar type %temp%. open the temp folder and then open the newest installation folder which starts with 7z, then open the Utils folder.
For a 32 bit OS open the X86 folder, open the X64 folder for a 64-bit OS.. follow those steps if you aren't sure about your OS type:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03666764&lc=en&cc=us&dlc=en
Run the RemovePreinstalledDrivers file and allow it to reach 100%
Go 2 folders up back to the 7z folder and locate the installation MSI file:
search for *x86.msi or *x64.msi, depanding on your OS type.
Right click the larger MSI file out of the 2 resutls, then click on Repair. if you get a prompt that it is only valid for installed software select Instal instead of repair.
Reboot your PC if prompted to do so.
Open the Officejet Pro 8500A software and follow the steps to reconfigure the device, then check for any difference.
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Connecting imac to macbook. "No devices detected"

I'm attempting to share screens betwee my MacBook and my iMac. I'm using a 18Pin DIGITAL SINGLE LINK DVI-I CABLE to conect them. Both devices are reading "No devices detected". Any suggestions for my next step?

The pre-2006 iMacs this forum covers do not support Target Display Mode. This Apple article shows the iMac models that do offer such support:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
My 2010 iMac (pre-ThunderBolt with Mini-dispaly) connects nicely to my ThunderBolt=equipped MacBook Pro with a standard Mini DisplayPort cable. ThunderBolt connections have the same form factor and pins as mini-displayport.
If your iMac is newer than 2005---i.e., shows having an Intel processor when you do "About this Mac"---please let us know and we can ask the forums Hosts to move you the the more active forum for newer iMac models

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

AirPlay mirroring issue "No Device Detected" with MBP2011 and ATV2

I upgraded my MBP (early 2011) to Mountain Lion. I have an ATV2 (v4.2.1 software). I am trying to AirPlay mirror from the MBP to the ATV but am getting a greyed out "No Device Detected" drop down. Both MBP and ATV2 are on the same network.

The issue is the "Projectors" as well (VGA projectors even DVI), Now Apple is asking all Universities, Colleges and High Schools to spend millions of Dollars to replace all their Projectors so students and professors they can install Mountain lion in order to run their presentations...Apple Mail still with BBC Bug, and many other bugs are not fixed yet because their nightmare Steve Jobs who was push on them to fix these bugs is not alive, and yes they can do anything bad to destroy Apple.
Mountain Lion is CRAP same thing as LION, Apple is doing worse and worse until Samsung will create a good machines for Microsoft, then Steve Jobs will wake up from his grave asking the bad administration of Apple why they are destroying it with such CRAP!!
check this out:
http://gizmodo.com/5782611/samsung-series-9-laptop-is-thinner-lighter-and-offici ally-more-expensive-than-the-macbook-air

Urgent problem with Recovery Manager's File backup operation: No storage device detected

I have a Pavilion g7-1070us laptop that failed to start and simply displays a blue-screen with a blinking cursor (no error message).
I could NOT get into safe-mode by hitting F8, but was able to activate the “HP recovery manager” by hitting F11.
I was trying to back-up my files before triggering the system restore. It asked me what types of files to back-up, then scanned the computer for these files and was finalizing the files for back-up; then suddenly an error message showed up saying something like "No storage device detected. Make sure the removable disc drive is connected to computer". But I have both a blank DVD sitting in the optical drive and a USB drive attached!!!!!!
I was expecting the system to ask me where to save these backed-up files but no such question was asked and this nonsense error message appeared out of nowhere. Apparently the recovery manager couldn't see my DVD or USB drive?
Can someone throw me a life-saver here? If I cannot recover my files, I cannot proceed with the system restore and I am forever stuck here!!!!!!
Please help!!!! Much appreciated!!
This question was solved.
View Solution.

The blinking cursor means the system is attempting to load Windows, but is unable to read the boot files. There are a number of causes including hardware issues. Run the tests as before to ensure the hardware is functional. I would have to run through the software repair steps only to find it is a hardware issue. Hard drives is perhaps the most common component to have issues regardless of the manufacturer.
I suspect the hard drive will pass the test and will go ahead and link to DavidPK's posts in this thread as they have the best chance to resolve the issue without losing and restoring everything. I do recommend this step at this point since two recoveries did not resolve the issue. DavidPK's solution comes in two parts, so be sure to follow both starting with the first post and moving to the second post should the first one not do the trick.
Let me know how this goes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Incompatible device detected printer mg6222

I am receiving the error message "incompatible device detected can go no further after the message.

Hi durkinjt!
To have a better understanding of your issue, please let everyone know what operating system you are using and where you see the error message. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Unsupported wireless network device detected

Hi guys,
I had to change the motherboard of my DV9420US; I bought a new motherboard from Megabyte Trading, the part number was the same (444002-001) and they told me it was an HP piece. However, after the technician replaced it, the following error appears when booting and forces me to shut down:
"104-unsupported wireless network device detected. System halted. remove device and restart".
Can anyone tell me how to fix this problem?
It starts to be disappointing: I have already spent over 400 bucks to repair the original motherboard first and buy a new one after, with the result that my laptop does not work yet.
Thanks.
simone73
This question was solved.
View Solution.

Remove the wireless card and boot into the notebook. Once into windows you will have to hardwire the notebook into an internet connection and go to HP.com. Place your PN number in the search and go to the software and driver downloads find the BIOS header and download the most update BIOS and flash the BIOS for the notebook. Once this has completed replace the WLAN and boot it back up, should fix the issue.

"New USB device detected" - large black window comes up & at the bottom it says "hold alt to remember the choice". How do I reset?

"New USB device detected" - large black window comes up when I plug an external HD or NetTalk device. At the bottom it says "hold alt to remember the choice". Im running Parallels 6.0, so give me the option to choose. I held alt and chose Mac. Now I want to choose Windows 7 - BootCamp, but Can't. How do I reset my choice, so it always asks me?
Thanks for your help!

You may get faster answers by also asking the Boot Camp forums area here:
Boot Camp

Why have I got "logitec device detection" in my fierfox add ons ?

recnnty got an update for logitec device detection which I have never heard of. Ifound it in my firefox add ons. Question is ,what is it and what is it doing there? I have not to my knowlage downloade it. should it be there?
firefox was newly installed on 25th feb 2011 and the addons I have installed are: Wot,Addblock plus. downthem all and fireftp
thanks in advance.

This plugin is only for the Logitech support page. I've never been on that page until I found this answer, but it's been in my firefox add-ons for ages.
This is installed, I think, when you install all your Logitech software. Seems weird and intrusive to install a browser plugin for one purpose: to detect you logitech devices and identify them when you go to logitech's support pages.
Even the time I've spent figuring out this fact was a waste of my life-energy.
http://www.logitech.com/en-ca/support-downloads

[SOLVED] Dell XPS 15 l502x + GT 540M + Bumblebee: No devices detected

Hello everyone,
I have Dell XPS 15 l502x laptop with GT 540M graphics card with optimus support. I want to enable optimus with bumblebee, but no matter what I do I just can't make it work. I'm already start thinking that this laptop is not supported....
I've installed the following packages from AUR to support optimus on my laptop:
bumblebee
nvidia-bumblebee
nvidia-utils-bumblebee
Also, I am using my own custom configured kernel, uname -a shows:
Linux milktea 3.2.13-1-abs #1 SMP PREEMPT Wed Mar 28 14:16:29 CST 2012 i686 Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz GenuineIntel GNU/Linux
The only changes from ArchLinux default kernel is CPU architecture (I changed to Core 2 Duo and later instead of default i686) and support for PAE.
When I run optirun glxgears I get this output:
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ERROR]Aborting because fallback start is disabled.
And Xorg.8.log is:
[ 4430.976]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 4430.976]
X.Org X Server 1.12.0.901 (1.12.1 RC 1)
Release Date: 2012-03-30
[ 4430.976] X Protocol Version 11, Revision 0
[ 4430.976] Build Operating System: Linux 3.3.0-1-ARCH i686
[ 4430.976] Current Operating System: Linux milktea 3.2.13-1-abs #1 SMP PREEMPT Wed Mar 28 14:16:29 CST 2012 i686
[ 4430.976] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux-abs.img BOOT_IMAGE=../vmlinuz-linux-abs
[ 4430.976] Build Date: 31 March 2012 09:47:27AM
[ 4430.976]
[ 4430.976] Current version of pixman: 0.24.4
[ 4430.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4430.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4430.976] (==) Log file: "/var/log/Xorg.8.log", Time: Sat Apr 7 12:10:38 2012
[ 4430.977] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4430.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4430.977] (==) ServerLayout "Layout0"
[ 4430.977] (**) |-->Screen "Screen0" (0)
[ 4430.977] (**) | |-->Monitor "Monitor0"
[ 4430.977] (**) | |-->Device "Device0"
[ 4430.977] (**) Option "AutoAddDevices" "false"
[ 4430.977] (**) Not automatically adding devices
[ 4430.977] (==) Automatically enabling devices
[ 4430.977] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4430.977] Entry deleted from font path.
[ 4430.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4430.977] Entry deleted from font path.
[ 4430.977] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4430.977] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4430.977] Entry deleted from font path.
[ 4430.977] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4430.977] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4430.977] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4430.977] (==) |-->Input Device "<default pointer>"
[ 4430.977] (==) |-->Input Device "<default keyboard>"
[ 4430.977] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4430.977] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4430.977] (II) Loader magic: 0x82225a0
[ 4430.977] (II) Module ABI versions:
[ 4430.977] X.Org ANSI C Emulation: 0.4
[ 4430.977] X.Org Video Driver: 12.0
[ 4430.977] X.Org XInput driver : 16.0
[ 4430.977] X.Org Server Extension : 6.0
[ 4430.978] (--) PCI:*(0:1:0:0) 10de:0df4:1028:050e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4430.978] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4430.978] (II) LoadModule: "extmod"
[ 4430.979] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4430.979] (II) Module extmod: vendor="X.Org Foundation"
[ 4430.979] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.979] Module class: X.Org Server Extension
[ 4430.979] ABI class: X.Org Server Extension, version 6.0
[ 4430.979] (II) Loading extension MIT-SCREEN-SAVER
[ 4430.979] (II) Loading extension XFree86-VidModeExtension
[ 4430.979] (II) Loading extension XFree86-DGA
[ 4430.979] (II) Loading extension DPMS
[ 4430.979] (II) Loading extension XVideo
[ 4430.979] (II) Loading extension XVideo-MotionCompensation
[ 4430.979] (II) Loading extension X-Resource
[ 4430.979] (II) LoadModule: "dbe"
[ 4430.979] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4430.979] (II) Module dbe: vendor="X.Org Foundation"
[ 4430.979] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.979] Module class: X.Org Server Extension
[ 4430.979] ABI class: X.Org Server Extension, version 6.0
[ 4430.979] (II) Loading extension DOUBLE-BUFFER
[ 4430.979] (II) LoadModule: "glx"
[ 4430.979] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4430.998] (II) Module glx: vendor="NVIDIA Corporation"
[ 4430.998] compiled for 4.0.2, module version = 1.0.0
[ 4430.998] Module class: X.Org Server Extension
[ 4430.998] (II) NVIDIA GLX Module 295.33 Sat Mar 17 15:18:29 PDT 2012
[ 4430.999] (II) Loading extension GLX
[ 4430.999] (II) LoadModule: "record"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4430.999] (II) Module record: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.13.0
[ 4430.999] Module class: X.Org Server Extension
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension RECORD
[ 4430.999] (II) LoadModule: "dri"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4430.999] (II) Module dri: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.0.0
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension XFree86-DRI
[ 4430.999] (II) LoadModule: "dri2"
[ 4430.999] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4430.999] (II) Module dri2: vendor="X.Org Foundation"
[ 4430.999] compiled for 1.12.0.901, module version = 1.2.0
[ 4430.999] ABI class: X.Org Server Extension, version 6.0
[ 4430.999] (II) Loading extension DRI2
[ 4431.000] (II) LoadModule: "intel"
[ 4431.000] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4431.000] (II) Module intel: vendor="X.Org Foundation"
[ 4431.000] compiled for 1.11.99.903, module version = 2.18.0
[ 4431.000] Module class: X.Org Video Driver
[ 4431.000] ABI class: X.Org Video Driver, version 12.0
[ 4431.000] (II) LoadModule: "mouse"
[ 4431.000] (WW) Warning, couldn't open module mouse
[ 4431.000] (II) UnloadModule: "mouse"
[ 4431.000] (II) Unloading mouse
[ 4431.000] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 4431.000] (II) LoadModule: "kbd"
[ 4431.001] (WW) Warning, couldn't open module kbd
[ 4431.001] (II) UnloadModule: "kbd"
[ 4431.001] (II) Unloading kbd
[ 4431.001] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4431.001] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4431.001] (--) using VT number 7
[ 4431.001] (EE) No devices detected.
[ 4431.001]
Fatal server error:
[ 4431.001] no screens found
[ 4431.001]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4431.001] Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4431.001]
Does anyone have any ideas on what might be wrong? Please, help.
Thanks in advance.
Last edited by leonid (2012-04-12 01:55:31)

I have bumblebee, dkms-bbswitch, nvidia-utils-bumblebee, nvidia, virtualgl
My bumblebee.conf is:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=true
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=bbswitch
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=bbswitch
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
I haven't edited any xorg.conf files whatsoever, so they are just the default ones. Here is /etc/bumblebee/xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection
What are the full relevant sections in lspci -vvnn saying? your grepping removed the verbose bits. e.g. when my nvidia card is off, it gives:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df5] (rev ff) (prog-if ff)
!!! Unknown header type 7f
but different when it's turned on.

My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

error at start for hp dv2410us stops at black screen with the next error message
error 104 unsupported wireless network device detected. System halted. remove device a start

Hi:
Did you just install a wireless card? You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
Paul

"Warning Unsupported wireless network device detected.Please remove device and restart"

Okay, so i went upnorth with my family and my Lenovo 3000 c100 worked perfectly one night, the next morning I woke up and turned on my laptop and i got this message "Warning Unsupported wireless network device detected. System halted. Please remove device and restart". I've tried to boot into bios it wouldn't let me. It says to interrupt normal startup press the lenovo care button???, i'm guessing it's the wrench with a square around it located near the power button?. I have found nothing to fix this problem and i need my laptop for work tomorrow.
Please help.
Thank you

The same problem hapend to me today. I just start the notebook and I'm getting the red message: "Warning Unsupported wireless network device detected.Please remove device and restart" .
I search the internet and I didn't found anything. I have the same problems like you guys... very strange message And no one knows the answers .
Please HELP!!

No DV Device Detection

Similar Messages

Maybe you are looking for