No earbuds work for the left side...why dis it not working?
My sons and husbands iphones work just fine with earbuds that dont work on mine. Why is mine not working? Earbuds used to work but not anymore.
Melinda1933 wrote:
It couldnt be that cause they work just fine on my hisbands iphone. Im wondering if it can even be fixed! But its nothing i can fix with teouble shooting. Thanks though.
Read my post again
CHECK the earphone socket on YOUR iPhone
The small round hole on top on left that is where the earphones are not working of course they work on
another iPhone that is not the one wityh a problem
If it is not debris it could be software do the troubleshooting ..........
Similar Messages
-
The left side of my keypad not working
The left side of my keypad not working
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order.
-
Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point. I recently got a Bluetooth headphone and the antennae is on the right ear piece. For seamless connection am required to have my iPhone on my right arm if am using the headphone outdoors.
I was wondering this too. Did you ever get an answer? I just bought a non-nike pair of sneakers and have a pod pouch now on my laces. I have it tight, at the lower part of the laces so its flat. When its on the left side my time is very similar to what it was when I used the nike shoes. When it is on the right side, my time is about 35sec/mile higher. I wonder which is more accurate and if you are supposed to have them on the same side. If so, then that is as accurate as with my nike shoes. Hope we get an answer soon. Im about to return everything its so frustrating.
-
Some of the left side of my screen wont work. What can i do that i havent already tried
Some of the left side of my screen wont work . Its driving me nuts. Ive tried rebooting it all and since i did so i cant get my back up from icloud. Because my id and password has a 2 in it which i cant use ... Any help or suggestions would be great. I am dreading having to find an apple store.
Thank you so much i was afraid taking it in was all i had left. Thank you for responding to my question
-
The left side of my trackpad stopped working on my macair
the left side of my trackpad stopped working on my macbook air,how to fix?
1) System Preferences > Trackpad > Point & Click > Secondary click > (make sure it is not set to a corner).
2) Bring your machine in to Apple and have them check to see if your battery is swollen -
The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
Its was a red colored tab and now its blue in color. I did not change any thing!Hey jimmiet,
There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
Matt -
I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error. -
"Validation" enabled for the composite and my testsuites are not working
I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT -
My earphones only work on the left side on Macbook Air (2012)
I don't remember if it wasn't working from before, I just bought a new Macbook Air; today, I plugged in my earphones and only the left side was working (left bud). It also works this way with my headphones and Apple Earbuds. Any ideas?
It could be that they're faulty, or myabe even your PC. Have you tried another pair of headphones on the PC to see if it's the PC that's faulty instead of the headphones?
-
The new itunes overfills the window on my desktop ( windows 7). When I move it to the left so that I can access the slidebar on the right, part of the left side of the screen then disappears. How do I correct this?
The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck. -
Left Side of scroll wheel not working! PLEASE HELP!!
the left side of my scroll wheel has completely stopped working!! all of the buttons on the wheel work fine, but when scrolling only the right side scrolls, its extremely frustrating! I'm planning on buying another ipod sometime in the future, but if I cant get my current one fixed, I'm not going to get another one. It wasn't dropped or damaged in anyway, one day the left side just became completely unresponsive.
PLEASE HELP!This Apple article explains how to troubleshoot your screen and may help you explain your problem when you take it to the store.
iPhone: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827 -
Some bookmarks do not incorporate the coloured logo on the left side-why not?
A handful of my bookmarks in Bookmarks Toolbar have a blank square to the left of the title.
How do I get these to be filled in with the appropriate coloured logo?Thanks for your reply-unfortunately it didn't work for three of the items:
MBNA credit card register home page
Admiral home insurance register home page and
Unity glasses
Can't understand this as they all had favicons on my Google bookmarks.
Any thoughts? -
Recon3D Omega Wireless Only working from the left side
Hi everyone,
A week ago I purchased the Sound Blaster Recon3D Omega Wireless headset. Today I started setting them up in my Ps4 and Pc and there is no sound comming out from the right side. Does anyone know what it could be? Or did the headset came defective?
thank you very much in advance!Originally Posted by Dideroth
Hi everyone,
A week ago I purchased the Sound Blaster Recon3D Omega Wireless headset. Today I started setting them up in my Ps4 and Pc and there is no sound comming out from the right side. Does anyone know what it could be? Or did the headset came defective?
thank you very much in advance!
Hi Dideroth,
Check out the audio balance of the software setting in the Mixer.
Cheers,
JL-CL -
The question is not so clear i will try to explain here.
I have a trackBar scroll event:
private void trackBar1_Scroll(object sender, EventArgs e)
LoadPictureAt(trackBar1.Value, sender);
ConvertedBmp = ConvertTo24(trackBar1FileInfo[trackBar1.Value].FullName);
ConvertedBmp.Save(ConvertedBmpDir + "\\ConvertedBmp.bmp");
mymem = ToStream(ConvertedBmp, ImageFormat.Bmp);
backTexture = TextureLoader.FromStream(D3Ddev, mymem);
scannedCloudsTexture = new Texture(D3Ddev, 512, 512, 1, Usage.Dynamic, Format.A8R8G8B8, Pool.Default);
timer1.Stop();
Button1Code();
timer1.Start();
b1 = ConvertedBmp;
b1.Save(ConvertedBmpDir + "\\b1.bmp");
trackBar2.Enabled = false;
if (!this.backgroundWorker1.IsBusy)
label2.Text = "מעבד נתונים";
this.backgroundWorker1.RunWorkerAsync();
else
this.backgroundWorker1.CancelAsync();
First LoadPictureAt method:
private bool LoadPictureAt(int nIndex, object c)
bool bRet = false;
if (nIndex >= 0 && nIndex < trackBar1FileInfo.Length)
if (c.Equals(trackBar1))
pictureBox1.Load(trackBar1FileInfo[nIndex].FullName);
bRet = true;
if (bitmaps != null)
if (nIndex >= 0 && nIndex < bitmaps.Length)
if (c.Equals(trackBar2))
pictureBox1.Image = bitmaps[nIndex];
bRet = true;
return bRet;
Then the ConvertTo24 method:
private Bitmap ConvertTo24(string inputFileName)
sw = Stopwatch.StartNew();
Bitmap bmpIn = (Bitmap)Bitmap.FromFile(inputFileName);
Bitmap converted = new Bitmap(bmpIn.Width, bmpIn.Height, PixelFormat.Format24bppRgb);
using (Graphics g = Graphics.FromImage(converted))
// Prevent DPI conversion
g.PageUnit = GraphicsUnit.Pixel;
// Draw the image
g.DrawImageUnscaled(bmpIn, 0, 0);
//converted.Save(outputFileName, ImageFormat.Bmp);
sw.Stop();
return converted;
Then ToStream method:
public static Stream ToStream(Image image, ImageFormat formaw)
var stream = new System.IO.MemoryStream();
image.Save(stream, formaw);
stream.Position = 0;
return stream;
What it does is taking a Bitmap image and make a doppler radar effect on it and detect color only places that there are pixels(clouds) in it.
Here is a screenshot:
You can see the doppler shape and it's moving around and highlight the places with clouds.
So when i move the trackBar1 to the left each time on another Bitmap image it's showing the doppler effect and the clouds.
The problem is with the trackBar2 scroll event:
First when i'm running my program and enteric to this new form that scan the clouds and show the doppler radar effect a backgroundworker1 is working:
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
BackgroundWorker bgw = (BackgroundWorker)sender;
if (bgw.CancellationPending == true)
return;
else
while (true)
bitmaps = ImagesComparison.get_images_with_clouds(b1);
for (int i = 0; i < bitmaps.Length; i++)
bitmaps[i] = ConvertTo1or8Bit.ColorToGrayscale(bitmaps[i]);
break;
What it does is getting into bitmaps(Bitmap[]) 15 new bitmaps from one given bitmap. The given bitmap is b1.
b1 i'm using it in trackBar1 scroll event.
All the new Bitmaps in bitmaps variable array are Format32bppArgb.
While i checked on my hard disk the images(GIF type) i'm using with trackBar1 are all Bit Depth 8.
The images i'm using with trackBar1 scroll event are GIF types and Bit Depth 8 on the properties.
The images i'm using in trackBar2 are Bitmaps and they are Format32bppArgb.
So first thing i thought to convert all the 15 Bitmaps in bitmaps to 8bit:
for (int i = 0; i < bitmaps.Length; i++)
bitmaps[i] = ConvertTo1or8Bit.ColorToGrayscale(bitmaps[i]);
But it didn't work it's just turning them to black gray scale colors not what i was thinking about.
In the backgroundworker completed event i'm converting the bitmaps to 24 like i'm doing with the Gifs in trackBar1 scroll event:
private void backgroundWorker1_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
trackBar2.Enabled = true;
trackBar2.Maximum = bitmaps.Length -1;
bitmaps[0].Save(ConvertedBmpDir + "\\bitmapsfirstimage.bmp");
for (int i = 0; i < bitmaps.Length; i++)
ConvertedBitmaps.Add(ConvertTo24(bitmaps[i]));
ConvertedBitmaps[0].Save(ConvertedBmpDir + "\\ConvertedBitmapsFirstImage.bmp");
label2.Text = "עיבוד הנתונים הסתיים";
b1.Dispose();
Then in the trackBar2 scroll event:
private void trackBar2_Scroll(object sender, EventArgs e)
LoadPictureAt(trackBar2.Value, sender);
ConvertedBmp = ConvertedBitmaps[trackBar2.Value - 1];
ConvertedBmp.Save(ConvertedBmpDir + "\\ConvertedBmp.bmp");
mymem = ToStream(ConvertedBmp, ImageFormat.Bmp);
backTexture = TextureLoader.FromStream(D3Ddev, mymem);
scannedCloudsTexture = new Texture(D3Ddev, 512, 512, 1, Usage.Dynamic, Format.A8R8G8B8, Pool.Default);
timer1.Stop();
Button1Code();
timer1.Start();
The same i did with the trackBar1 scroll event.
But the result in trackBar2 i'm getting without using the grayscale convertion is this:
You can see that the color that make the scan now is more yellow or green/yellow and not the same like it is when i'm using the trackBar1.
I can't figure out where the problem is:
1. Maybe since the Bitmaps in the variable array bitmaps are all Format32bppArgb ?
2. Maybe they are Bitmaps and not Gif types like the images in trackBar1 ?
If it does working good with the gifs in trackBar1 scroll event then the whole code in the new form ScanningClouds is working fine so i will not add to here the whole ScanningClouds form code since it's long.
The problem is somewhere with the Bitmaps formas or bits in the variable bitmaps.
Maybe they are not the same or the right Bit Depth or maybe they are Bitmaps and should be Gifs.
bitmaps = ImagesComparison.get_images_with_clouds(b1);
This is the get_images_with_clouds method where i'm getting the new 15 Bitmaps.
public static Bitmap[] get_images_with_clouds(Bitmap radar_image)
int e = 0;
int f = 0;
int image_clock_area_x = 0;
int image_clock_area_y = 0;
int image_clock_area_x1 = 140;
int image_clock_area_y1 = 21;
Bitmap[] localImages;
localImages = new Bitmap[15];
Bitmap image;
image = new Bitmap(Properties.Resources.radar_without_clouds);
BitmapData bmD = null;
BitmapData bmD2 = null;
try
bmD = image.LockBits(new Rectangle(0, 0, image.Width, image.Height), ImageLockMode.ReadWrite,
PixelFormat.Format32bppArgb);
bmD2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly,
PixelFormat.Format32bppArgb);
IntPtr sc0 = bmD.Scan0;
unsafe
int* p = (int*)sc0.ToPointer();
int* p2 = (int*)bmD2.Scan0.ToPointer();
for (e = image_clock_area_x; e < image_clock_area_x + image_clock_area_x1; e++)
for (f = image_clock_area_y; f < image_clock_area_y + image_clock_area_y1; f++)
Color clock_color = Color.FromArgb(p2[e + f * bmD2.Width]);
p[e + f * bmD.Width] = clock_color.ToArgb();
image.UnlockBits(bmD);
radar_image.UnlockBits(bmD2);
catch
try
image.UnlockBits(bmD);
catch
try
radar_image.UnlockBits(bmD2);
catch
int c;
for (c = 0; c < localImages.Length; c++)
localImages[c] = new Bitmap(image);
Bitmap new_image = new Bitmap(Properties.Resources.radar_without_clouds);
Bitmap new_image1 = new Bitmap(Properties.Resources.radar_without_clouds);
Bitmap localbmptest = black_and_white(new_image, radar_image);
Image image1 = black_and_white(new_image, radar_image);
image1.Save(@"c:\temp\testclouds666.jpg");
Bitmap clouds = new Bitmap(image1);
int x;
int y;
int a;
int b;
int d = 0;
Bitmap redImage;
redImage = new Bitmap(512, 512);
using (Graphics g = Graphics.FromImage(redImage))
g.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.NearestNeighbor;
g.PixelOffsetMode = System.Drawing.Drawing2D.PixelOffsetMode.Half;
g.Clear(Color.Red);
BitmapData bmData = null;
BitmapData bmData2 = null;
BitmapData bmDataArray = null;
try
bmData = clouds.LockBits(new Rectangle(0, 0, clouds.Width, clouds.Height), ImageLockMode.ReadOnly,
PixelFormat.Format32bppArgb);
bmData2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly,
PixelFormat.Format32bppArgb);
IntPtr scan0 = bmData.Scan0;
IntPtr scan02 = bmData2.Scan0;
unsafe
int* p = (int*)scan0.ToPointer();
int* p2 = (int*)scan02.ToPointer();
double h, mm;
for (d = 0; d < localImages.Length; d++)
bmDataArray = localImages[d].LockBits(new Rectangle(0, 0, localImages[d].Width, localImages[d].Height), ImageLockMode.ReadWrite,
PixelFormat.Format32bppArgb);
IntPtr scan0Array = bmDataArray.Scan0;
int* pArray = (int*)scan0Array.ToPointer();
for (a = 0; a < new_image.Width; a++)
for (b = 0; b < new_image.Height; b++)
Color color1 = Color.FromArgb(p[a + b * bmData.Width]);
Color color2 = Color.FromArgb(p2[a + b * bmData2.Width]);
if (color1.R != 0 || color1.G != 0 || color1.B != 0)
h = color2.GetHue();
mm = RadarAnalysis.Hue2MMPerHour(h);
if (mm >= treshhold_array[14 - d])
pArray[a + b * bmDataArray.Width] = color2.ToArgb();
localImages[d].UnlockBits(bmDataArray);
clouds.UnlockBits(bmData);
radar_image.UnlockBits(bmData2);
catch (Exception error)
try
clouds.UnlockBits(bmData);
catch
try
radar_image.UnlockBits(bmData2);
catch
try
localImages[d].UnlockBits(bmDataArray);
catch
Logger.Write("Error Exception ==> " + error);
MessageBox.Show("Error Exception ==> " + error);
return localImages;
I think not sure but i think the problem is that the images on my hard disk i'm using with the trackBar1 scroll event are Gif type and the images i'm using with the trackBar2 scroll event are 15 Bitmaps.Hi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten
Maybe you are looking for
-
I just noticed that all my calendar events past the last 30 days are no longer on my calendar,(other then yearly recurring) . Is there a way to retrieve them or are they lost? I need them for my business!!
-
Indonesia - ODN VAT/Tax invoice -Special requirement.
Dear All, Appreicate your help and advice to handle this requirement. We have implemented the indonsian ODN functionality for issuing ( Domestic -Tax invoices -VAT serial no ). Currently it works as below when an invoice cancellation process takes p
-
I need help with someone's problem?
Originally from Yahoo Answers. I'm empty! "Why does my mac keep putting all the settings back to defult? I got an older mac today, and supoivily they cant glitch, but yet some freaking how, whenever I personalize the background or ANYTHING even the n
-
My account is Blocked
-
[svn] 3401: don't include frameworks/projects/air/ ApplicationUpdater directory in the package.
Revision: 3401 Author: [email protected] Date: 2008-09-29 10:54:59 -0700 (Mon, 29 Sep 2008) Log Message: don't include frameworks/projects/air/ApplicationUpdater directory in the package. -trying to reduce bloat the package has incurred Modified Path