NO EAX Effects for Soundfont synth on Live! 24-

I have the exactly problem as mentioned in this thread:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=40849&que ry.id=38#M40849
There is no solution there. The Creative Soundfont synth sounds extremely dry. How can i add, at least, reverb and chorus to it's
Thanks.

No it's not. Remember that reverb and chorus can be applied to the main audio (wav) and therefore requires much more processing power than for midi. Both can also be applied to the General Synth Table but not to the Creative Soundfont Synth. Reverb works by tweaking the soundfont file but this is really crazy because I have to go back into all my soundfonts and if I want to change the reverb level I have to go back into all those soundfonts. Not a good solution.
I think this has to due with the fact that the new EAX console is much more limited than the previous versions. Before, you could affect reverb and chorus independently to the Wav channel or the Midi channel. There was much more tweaking available to the SB cards and that are now only available to the Audigy series.
They really downgraded the software and this is a major bug.
Martin

Similar Messages

Need help for soundfont of SB Live

First of all, sorry for my bad english. I just need some help. I bought a SB Li've 24bit External for using with?modified soundfont file and notebook, the problem is when playing midi on soundfont, the voice of kickdrum?was disappeared for some time. Previous?Creative soundcard such as SB Li've 5. on PCI slot is working properly. This problem was still happened with AudigyNX, and many people found this problem the same as me(in Thailand). Perhaps a little voice polyphonic on soundcard. Please help me because I need to use it for working. more infoNotebook celerom M .86GHz52MB RamWindowsXP SP2Updated drivers from Creative's website?thanks

First of all, sorry for my bad english. I just need some help. I bought a SB Li've 24bit External for using with?modified soundfont file and notebook, the problem is when playing midi on soundfont, the voice of kickdrum?was disappeared for some time. Previous?Creative soundcard such as SB Li've 5. on PCI slot is working properly. This problem was still happened with AudigyNX, and many people found this problem the same as me(in Thailand). Perhaps a little voice polyphonic on soundcard. Please help me because I need to use it for working. more infoNotebook celerom M .86GHz52MB RamWindowsXP SP2Updated drivers from Creative's website?thanks

EAX Effects That used to be on Sound Blaster Live Gone from Audigy

[size="4" color="#0000ff" face="Century">?[size="4" color="#0000ff">Greetings,[size="4" color="#0000ff">?[size="4" color="#0000ff">I now own a Audigy SE for my Small Form Factor PC, The last time I had a creative Card it was a Sound Blaster Li've 5.[size="4" color="#0000ff">?[size="4" color="#0000ff">There use to be a ton of EAX Effects settings you could choose from to record yourself like a chipmunk,male to female,female to male,zeus, and many more. However these dont seem to be available in the EAX Software I have. Where can I get more effects to download that I can add to the existing EAX Control Panel?[size="4" color="#0000ff">?[size="4" color="#0000ff">Thanks

Let's make this easy.
First download and install Driver Cleaner Pro; http://www.softpedia.com/get/Tweak/Uninstallers/Driver-Cleaner-Professional.shtml
Then clean out all creative and creative lite drivers then delete any folder in your system that has the name creative on it (usually find these with a quick File or Folders search in the start menu. Then download and install Crap Cleaner; http://ccleaner.com/, go a head and clean out files and do scan of the registry with ccleaner and remove unneeded reg stuff. Now reboot. One more thing, if you still see the "Device Control" icon in the control panel you must remove it's corresponding .cpl file in the "\windows%base%\system32\" folder.

EAX effects and Audition 2.0

Hi ! I have a littlebit of a different problem ... I am tryin to record the applied EAX effect directly into Audition ... since the Creativ ASIO drivers are broken for Audition 2 I am using the recommended ASIO4ALL wrapper..it work well for normal input .. with the creative driver I cant even record without any kind of effect, but with the wrapper it works fine ... now there is a problem ... What u hear only works with the CreativeMediasource recording .. I do get the effects applied there but since the point is to record in Auditon with metronome and the acompaniing recordings of the other band instruments mediasource is clearly not usefull...
Now If i record in audition with the desired effect applied *example a simple Destoriton wiht a rewerb .. I do hear it and it records BUT WITH A DOPPLER EFFECTS that goes up all the way till it saturates the eintiere sound thats beein recoreded .. Is there a way to tell the What u hear recording preset only to listen to the input with the applied effect and ignore all other outputs ?? Or juts to tell the audgy mixer to record the input with the applied effet?
Now it seems to me that mediasource is probably written in a way to deviate such an effect (or to ignore the output while recording the input with the effect applied )but the problem is that the same thing also hapens in Soundforge ..
I know that what u hear was intenden so we can capture the output with the effects but it clearly isnt working the way it should ... is there a way to make a recording on the Audigy 4 with an eax effect applied ot a linein input (el. guitar) into a 3nd party pro program ala Soundforge and Audition 2.0
My system is comps config is >
Athlon XP 2600+
Nforc2 mobo with nforce audio
512MB Ram
Audigy 4 PRO
WIn XP SP2
Audition 2.0
Soundforge 6
I tried numerouse outputs and inputs with the flawd Creative asio driver *it only works for output in mulitchanell mixing* and with the recomended ASIO4ALL driver but I can only make it work without any effects applied to the recording .. and since the audigys effects are sooooooo good and easuly tweakable a vould really like to use those instead of some expensive external effects... I vould also like to avoud using the nforce as a loopsource to record form coz it degrades the recording quality considerably and ading another audigy vould be a driver nightmare according to my research
thnx for the help

Corben9 wrote:
Hi ! I have a littlebit of a different problem ... I am tryin to record the applied EAX effect directly into Audition ... since the Creativ ASIO drivers are broken for Audition 2 I am using the recommended ASIO4ALL wrapper..it work well for normal input .. with the creative driver I cant even record without any kind of effect, but with the wrapper it works fine ... now there is a problem ... What u hear only works with the CreativeMediasource recording .. I do get the effects applied there but since the point is to record in Auditon with metronome and the acompaniing recordings of the other band instruments mediasource is clearly not usefull...
Now If i record in audition with the desired effect applied *example a simple Destoriton wiht a rewerb .. I do hear it and it records BUT WITH A DOPPLER EFFECTS that goes up all the way till it saturates the eintiere sound thats beein recoreded .. Is there a way to tell the What u hear recording preset only to listen to the input with the applied effect and ignore all other outputs ?? Or juts to tell the audgy mixer to record the input with the applied effet?
Now it seems to me that mediasource is probably written in a way to deviate such an effect (or to ignore the output while recording the input with the effect applied )but the problem is that the same thing also hapens in Soundforge ..
I know that what u hear was intenden so we can capture the output with the effects but it clearly isnt working the way it should ... is there a way to make a recording on the Audigy 4 with an eax effect applied ot a linein input (el. guitar) into a 3nd party pro program ala Soundforge and Audition 2.0
My system is comps config is >
Athlon XP 2600+
Nforc2 mobo with nforce audio
512MB Ram
Audigy 4 PRO
WIn XP SP2
Audition 2.0
Soundforge 6
I tried numerouse outputs and inputs with the flawd Creative asio driver *it only works for output in mulitchanell mixing* and with the recomended ASIO4ALL driver but I can only make it work without any effects applied to the recording .. and since the audigys effects are sooooooo good and easuly tweakable a vould really like to use those instead of some expensive external effects... I vould also like to avoud using the nforce as a loopsource to record form coz it degrades the recording quality considerably and ading another audigy vould be a driver nightmare according to my research
thnx for the help
I think w/ Cockos Reaper you should be able to record from output too (versions to 0.9x are freeware). There are some other software capable for this, like energyXT.
Also, forget those EAX effects and check out what all goodies you can find even as freeware from KVR; like
- Kjaerhus Classic serie
- Karma FX effects
- Voxengo effects
- Fretted Synth guitar combos
- etc.
Also, w/ Creative ASIO (which should work well w/ Audition 2) you should be able to 'render' through EAX when exporting the final mix (see this thread for more on CT ASIO I/Os).
jutapa
Message Edited by jutapa on 09-17-2006 01:40 AM

ALchemy and advanced EAX effects on Vis

After upgrading to Vista, I thought little about the omission of DirectSound until I started playing World of Warcraft again last night. EAX effects are gone!
So after spending a few hours reading up on solutions, I stumbled across Creative ALchemy, which promised a solution. I've installed it and converted the .dll's correctly, but nothing has changed! The advanced reverb effects that previously made World of Warcraft so enjoyable are still gone, and the sound is still thoroughly "flat".
I'm no sound expert and it's certainly possible that basic DirectSound effects were added through OpenAL, but I do know that the advanced EAX effects are gone.
Anyone have a solution? Is this a planned feature in a future release, or does it sound like the problem may be with World of Warcraft, or something with my own driver installation? Thanks in advance,
~Sangye Ince-Johannsen

Alright, here's what my log said:
Logging Time : 5/5/2007 at 5:06:34
Loaded ini file from D:\Games\World of Warcraft
NOTE : If you have a SB X-Fi card, please use the Creative Audio Console application to enable 'Game Mode'.
Failed to initialize OpenAL
DirectSoundEnumerateA : Failed to load and initialize ct_oal.dll, falling back to dsound.dll
NOTE : If you have a SB X-Fi card, please use the Creative Audio Console application to enable 'Game Mode'.
Failed to initialize OpenAL
DirectSoundCreate8 : Failed to load and initialize ct_oal.dll, falling back to dsound.dll
So, I switched to Game Mode, and now my game sound has completely stopped working. The new log, however, is clean:
Logging Time : 5/5/2007 at 6:0:33
Loaded ini file from D:\Games\World of Warcraft
Thanks for the response. Any idea what the problem may be in light of these logs?
Thanks again,
~Sangye Ince-Johannsen

Best EAX Effects with SB Audigy 2 ZS and Headset?

Best EAX Effects with SB Audigy 2 ZS and Headset?Hi,
I have reinstalled Windows XP SP3 lately and installed just the Audigy_SupportPack_3_8 as driver for my Audigy2 ZS. I have a Sennheiser PC50 headset.
Now I can't get EAX to work.
The EAX setting in game is enabled and it sounds different than without it but I can only distinguish left from right but not top from bottom and front from rear.
Am I lacking any driver component?
How do I setup the audio device in Windows? Headphones or 4 speakers?
Do I need CMSS 3D? CMSS or CMSS2? Even if the game supports EAX?
What about optimize 3D-Effects for headsets? I use a headset, so I should enable it's
And also I can't find the suround mixer, is this not included in this support pack?
I mean this one:
Best Regards
sanni

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Audigy 2 ZS Notebook/ Creative Soundfont Synth

.Audigy 2 ZS Notebook/ Creative Soundfont Synth; Hi there, if have a problem with this card. I solved it in some way, but maybe someone has got a hint for me. The problem: Creative Soundfont Synth only works with the original driver cd installation. The only working driver update, wich leaves the Creative soundfont Synth functional, ist the one available via Windows Update (Windows XP). If im using autoupdate from creative, and a newer driver like the 2_0_06 or the 2_8_00 is installed, the creative soundfont synth is dead. No way to get it to work. (DXDIAG shows errormessages while testing, Synth cannot be initialised) I reinstalled the driver manually, i tryed to uninstall it, so many options i've tryed: no way! So i gave up, and now im staying with the latest drivers from windows update. The card is working fine, so its Ok for now. Is there someone else with the same problem? Question: Do someone know why the hardware synth on this card is disabled? Why is this sofware synth necessary? The card is a EMU0K2, so it has the Hardware Synth available theoeretically. This Software Synth- Installation is a [email protected]

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Text Effects for iMovie

I am looking for some plug-in text effects for iMovie 08, I could settle for iMovie HD 6 or Final Cut Express. Specifically I am looking text bubbles or comic bubbles.
Can anyone help me in my search?
Thanks
Gene

I am looking for some plug-in text effects for iMovie 08
iMovie '08 does not currently have a "plug-in" architecture compatible with plug-ins.
I could settle for iMovie HD 6 or Final Cut Express.
iMovie HD v6.0.4 is available as a free download to iLife '08 owners.
Specifically I am looking text bubbles or comic bubbles.
Such effects are easily created with most graphic applications and can be applied from within iMovie '08.

Upload in Excel Sheet for Mid Year Go Live

Hi Friends,
How to upload T558 B & C tables in Excel Sheet for Mid Year Go Live.
Awaiting for your reply
Regards
Praveen P

Hi,
t558c template here between postingdate and amount two blank tab is there
client pernr period country wagetype postingdate amount
t558b template here between period and posting date two blank tab is there
client pernr period postingdate periodparameter year period monthstartrdate enddate month
and the date format is YYYYMMDD
Edited by: BALAPANI on Oct 13, 2009 12:19 PM

List of wage type for mid year go live

Dear All,
I need your help we are going for mid year go live and we are planning to uploaded payroll results .so here iam confissued with the wage types which should be uploaded so kinldy send me any list of wage types for statutory and income tax to be uploaded in results so that they can get statutory forms and form16.
thks

Dear Laxman,
refer the links its use full to you and directs you towards solution
[Mid year Go-Live (India Payroll);
[http://help.sap.com/saphelp_47x200/helpdata/en/5a/f57415558f4e52925b05aa57dad09d/content.htm]
[regarding mid year go-live;
regards,
mohammed

HT1541 I live in Canada and have a Canadian iTunes account. How can I purchase an iTunes gift card for a relative who lives in another country?

I live in Canada and have a Canadian iTunes account. How can I buy an iTunes gift card for a relative who lives in another country?

Sorry, but it's quite possible that you can't. If there's an Apple Store in the country to which you want to give the gift, you can call them ask ask if they'll accept a Canadian credit card for a gift card purchase to be shipped to an address in the relative's country. If they won't, then you'd have to find an independent reseller in that country that carries iTunes gift cards who could accept your credit card, and there may be none.
Regards.

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

In need of more vocal effects for garageband

I'm pretty new to garageband and love the software and the community of folks helping one another.. Thanks to all ahead of time for your assistance.
I was just wondering if there are any programs or locations online to download voice effects for garageband? I've looked and have found a few spam sites and a few sites with software but no faq's or any real explanantion of their product. So i'm asking you folks for direction with this one since one of you might've gone through this before.
Thanks again for your help.

look at these web sites.
http://www.mda-vst.com/
mda-vst has a series of AU you can use on your voice.
Detune is nice. Detune - Simple up/down pitch shifting thickener
Leslie is nice. Leslie - Rotary speaker simulator
I use them alone or in combination. Try their different presets or make your own extremes.
Forget about the Talkbox AU. It doesnt seem to work in GB but might in logic.
KTGranulator is a free delay line granulator.
http://www.koen.smartelectronix.com/KTGranulator/
It has many presets. Use your mic and talk or sing into each preset to see what you like. It comes with 40 presets.
Presets 6&7 will give you a metallic sound called metallic 01 & 02.
Preset 16 is called "Android". Try them all you never know. Try combining them with "Detune" or "Leslie"!
Monstachorus is fun. Try the presets or experiment with new ones.
http://www.macmusic.org/software/view.php/lang/en/id/3098/
These are just a few examples. Best thing to do if your looking for unusual ways to change your voice is to try them in every AU you can get a hold of. You just never know what you'll come up with.
also try the tremolo and phaser that come with GB, or even the drum and guitar effects. I like to use guitar effects for distorted voice effects.

Need help w/ Photo Slideshow Effects for FCPX

How do i create a background/generator/effect similar to this for my still images for my photo slideshow presentation? Im just using ken burns effect and it looks a little plain for me. I cannot find a plug-in that would give this background effect for my photos. help please!

Here is another: 3D Glass Shelf Effect (see here: http://www.premiumbeat.com/blog/the-big-list-free-fcpx-effects-filters-and-templ ates/)

Turning off "Ken Burns" effect for SOME photos

I see that someone has asked a similar question in the past and told that it's not possible to turn off the Ken Burns effect for some photos, but I'm hoping someone has a workaround or there's a hack...
I've made a slideshow and got the idea to "tell the story" by creating some "title" images in Photoshop elements which I've placed in between a series of photos.
These are just black backgrounds with the title (e.g. "...and the party begins", "Family reunion" etc.) in big white letters. I'm very happy with that idea
I like the Ken Burns effect for the slideshow as it adds some semi-video "action" effect, but NOT on the titles. Having the Ken Burns effect there just looks stupid, so I would like to remove it for the titles alone.
I know I can do it the other way round (go to "Settings" for the Slideshow, deselect "Automatic Ken Burns effect", then manually add the effect for all the photos I want), but with a slideshow album that's going to take ages to do!!
Is there a better way?

Perhaps you're checking the KB button on the "main" menu for the slideshow. That actually changes only the setting for the image that is currently selected. Try using the "Settings" button and deselect the "Automatic KB effect."
John

NO EAX Effects for Soundfont synth on Live! 24-

Similar Messages

Maybe you are looking for