No elevation prompt for partition access

When trying to access administrator home folder from a non-administrator user account, it normally asks for an elevation.
I set my partition (D:) security settings exactly like my home folder. But when a non-administrator user account tries to access the partition D:, it gets "Access Denied" instead of the elevation prompt.
What's the difference there?? And how I can get elevation prompt?

Hi,
I just tested what you mentioned and get the same results. This difference produced by inheriting permission, and the partition lives upon folders. Since you have privilege of accessing the partition, you may get evaluated notification when you try to access
the folder configured deny.
If you would like to protect the partition, what about to use BitLocker. You can also configure a password to access the partition.
http://windows.microsoft.com/en-us/windows-8/bitlocker-drive-encryption
Hope this could be clear.
Kate Li
TechNet Community Support

Similar Messages

Epson Scan prompting for firewall access every time

I’m running Mavericks on a mid-2007 iMac. I have an Epson 710 All-in-one printer. It is connected via USB to my Airport Extreme Base Station. That works fine for printing, though I have to connect to the scanner module via its built-in wifi. Although Image Capture works, Epson has a convenient (and more user friendly) application, Epson Scan. It has been recently supposedly updated for Mavericks, though I can’t see any obvious changes, and the version number seems to be the same. The issue is that EVERY time I launch Epson Scan, I get the “Do you want the application “EPSON Scan.app” to accept incoming network connections?” message. Obviously, I “Allow” each time. I’ve manually added the application to the Firewall exceptions list in System Preferences. I’ve opened the application’s package and put the enclosed application into the Firewall exceptions. I’ve repaired permissions. I’ve uninstalled and reinstalled. I’ve tried booting and installing under a fresh test user account. I’ve contacted Epson, only to be told that "Actually this message is not coming from Epson Scan, this is a part of your system (utility) that pop up. Epson scan does not require this option.” Helpful, eh?
This is the ONLY application I have this issue with. This problem has had me scratching my head at least as far back as Lion, if not to Snow Leopard.

Hi Louis, I had the same issue and managed to resolve it by removing Epson Scan from the Firewall!
Hope this helps.
iMac (27-inch Late 2012), OS X Yosemite (10.10.2)

UAC Behaviour when set to "Prompt for Consent on the Secure Desktop"

We are in the process of testing UAC on Windows 8.1. UAC is enabled for admins and the setting for "Behavior of the elevation prompt for administrators in Admin Approval mode" is set to "Prompt for consent on the secure desktop".
This results in the administrator having to go through three separate prompts in order to execute the function which required elevation.
First there is a dialog which gives the options "I want to complete this action by entering my credentials on the authentic Windows sign-in screen" or "I don't want to complete this action"
Second there is a prompt to press CTRL-ALT-DEL to enter your credentials
Third there is the prompt for consent on the secure desktop.
Is there a way I can configure UAC to not have the first two prompts?

Hi Fangzhou and thanks for the reply. The action is just to "Run as Administrator" on anything. Perhaps I should share the full set of settings I have in group policy:
User Account Control: Admin Approval Mode for the Built-in Administrator account
Enabled
User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop
Disabled
User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode
Prompt for consent on the secure desktop
User Account Control: Behavior of the elevation prompt for standard users
Prompt for credentials on the secure desktop
User Account Control: Detect application installations and prompt for elevation
Enabled
User Account Control: Only elevate executables that are signed and validated
Disabled
User Account Control: Only elevate UIAccess applications that are installed in secure locations
Enabled
User Account Control: Run all administrators in Admin Approval Mode
Enabled
User Account Control: Switch to the secure desktop when prompting for elevation
Enabled
User Account Control: Virtualize file and registry write failures to per-user locations
Enabled

E2500 with multiple APs for guest access

I got 5 E2500 routers and the main one has setup to IP address 192.168.1.254 and the rest APs are programmed into the bridge mode with the IP address 192.168.1.245 through 248. The secured wireless network works fine when I roaming between these APs but the only AP that I can get internet access for guest wireless network is the main (192.168.1.254) router; for every other APs, I will get the guest log on screen (prompt for guest access password) and no internet access after I type in the correct access password. Does the E2500 support multiple APs guest or it requires a special way to configure it? Please help...
Jim

Guest Access allows you to provide Internet connection to your guests, however, they will not have access to your computers or other personal data. When you set up your Valet or Linksys Wireless-N router, the Cisco Connect software will create two wireless networks with the same Wireless Network Name (SSID) that differs from one another by a -guest suffix to one of the wireless network names.
So first of all remove all the networks from the preferred list of the computer and then try to connect.

WLAN network always prompts for user name and password...

Hi,
Everytime Airport detects the WLAN of my institution, it prompts "Authenticating to network" and I have to put in my user name and password. Is there any way to store this information (probably in the keychain) so that an automatic login to the WLAN [as in my home network] is possible? The problem is that I can not find any button like "save this password in the keychain" [you can only put in user name and password]. Is it possible that my institution prevents automatic login?
I also tried to create an item in the keychain directly - does not work.
Cheers

Hi,
I agree in that there has to be a prompt for WLAN access. Otherwise just everyone could step by and use the access. But if I have to authenticate once, why should the institution prevent an automatic login for me in the future? Well, okay, if someone steals my notebook and knows my master password... hmm, so there is no way to locally (on my notebook) use some software that automatically puts in my user name and password so that I - maybe - only have to push the "Go/Enter/Access" button?
For example, some institutions use browsers to authenticate and 1Password, but also Safari natively, can automatically fill in the information.
Cheers

Prompt for a username/password while accessing a resource in wls 6.0

Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, Prabhat

WL 6.0 doesnot support URL based access control directly but you can read on
docs on these two links and
they helped me to restrict access to certain url's by prompting user for
username and password
http://e-docs.bea.com/wls/docs60/programming/webappdeployment.html
http://e-docs.bea.com/wls/docs60/adminguide/config_web_app.html
"Tom Mitchell" <[email protected]> wrote in message
news:[email protected]..
Prabhat,
You can restrict access to deployed resources by specifying the access
constraints in the deployment descriptors. For things without
deployment descriptors, you can use the console.
HTH.
prabhat wrote:
Hi all, I want to restrict access to any resource on my weblogic
server 6.0 and prompt for a user name and password before accessing
any resource. I did this using weblogicurl.policy file in wls 5.1.
I am not able to find out how to do this in 6.0. Can anyone help
me out plz. thanx, Prabhat--
Tom Mitchell
[email protected]
Very Current Stoneham, MA Weather
http://www.tom.org

Shared folders (Windows file shares) show access denied and do not prompt for credentials

Scenario:
Like other admins, I log on and work as a 'standard user' (usera) with no admin rights anywhere in the domain, to perform admin tasks I have another account (userb) which I authenticate with as and when required. userb has been allocated/delegated permissions
as required.
Problem:
When trying to connect to shared folders on servers (2008 R2) using a UNC patch via Windows Explorer (Win 7 Ent.), I see an access denied error and do not get an option to supply alternative credentials.
If I try to connect to the admin shares on the same server (\\server\C$ or \\server\e$) I get an access denied message AND get prompted for credentials. I supply my admin account and gain access as expected.
If I check share and storage management when attempting to connect, I see that Windows is trying to connect me to each share as usera (which has no access). I understand why I get access denied at this point, but not why it can't just prompt me to supply an
account that does have access. When trying the admin shares I also see the usera account, but I get a prompt to supply a user who does have access.
Share permissions on the folders are for example 'Everyone' Full Control. NTFS permissions are 'userb' has modify (read, execute, list, traverse etc) via a 'Server Admins' AD Universal security group.
Note: If I do a NET USE from CMD and use the /USER switch, I can access the shares fine. But this is not great for accessing shared folders on the fly from various computers.
How can I get the other shares on the server to prompt me, rather than just say access denied?
Many thanks.

Try to disable guest user from the server
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
suggestion in a test environment before implementing!

MS access database prompting for username and password

Hello,
When I try to run a crystal report that is connected to a (Access Database) from crystal server 2013, I get prompted for a username and password. Im not sure what im doing wrong, Ive tried creating a ODBC connection, change the SAP service to run under a domain user account, recreated the report with a different file path. but still no luck, please help im at a lose.
Thank you

Hello,
Refer please to the following kbas, probably this can help you :
http://service.sap.com/sap/support/notes/1270997
http://service.sap.com/sap/support/notes/1661997
Regards,
Asma

Kerberos - client has TGT, but prompted for password when accessing share.

I'm getting ready to deploy Leopard to my client base and I'm doing final testing. I have a magic triangle/cylinder of destiny situation, using Active Directory and Open Directory running on 10.5.2.
With a 10.5.2 client bound to both directories, I can log in to the client machine with an AD account, however when I try to connect to a file share, I am prompted for name & password. I checked /System/Library/CoreServices/Kerberos, and I have a TGT.
I'm stumped as to why I'm being prompted when I have a TGT. Any ideas?

Go back to the basics. Time and DNS. Make sure all servers are using the same time server (OD box points to AD domain controller - use ntpq -p to confirm time sync). Make sure forward and reverse resolve works for all servers in the chain. If this all checks out, then look at your AFP service settings or temporarily launch SMB and see if it will issue a service ticket.
You are talking to two different machines but with a common auth point. The first process, getting the TGT is entirely devoted to communication with the AD domain. The KDC in AD agreed that you are who you claim to be and that you can be trusted, thus granting you access to domain resources. The next step is attempting to access a resource on a server that you believe to be part of the trust. In this case, an OS X Server running AFP (assumably). In this case, the OD system needs to be configured as a domain member of the AD environment and all services "Kerberized". This is an area in which Apple needs a little work under Leopard. Tiger was so easy. I've had better luck using dsconfigad's enablesso than with the GUI tools.
However, assuming that you performed all the usual steps, first review the contents of your edu.mit.kerberos file and make sure that Leopard did not rewrite the file and place the OD system in as the KDC. That is all wrong. Next, take a look at your principles by using klist -k. Is the realm information correct? And finally, review the settings in the afp configuration file. The realm information in that file is often messed up if you launch AFP before you have the server bound up properly.
My guess is that the OD box thinks it is the KDC and you will likely need to manually edit the edu.mit.kerberos file and force the file to be static (remove the third and fourth lines). This is common if you joined the AD domain and then promoted the server to OD Master.
Hope this helps

Dot1x - network access without prompting for password

Dear all,
I have a customer with wired dot1x which appears to no longer prompt for user authentication. The topology is a Radius server, Cat2950 switch and Windows XP clients. Recently, we have discovered that the PCs are not prompting for authentication and users are getting straight onto the network.
When I delete the Windows registry entry
HKEY_CURRENT_USER-Software-Microsoft-EAPOL- UserEupInfo
I am again prompted for the username/password and the registry entry is added back in.
Does anyone know how I can get the PC to always prompt for username/password without having to edit the registry each time?
Many thanks in advance,
Tracey

Tracy,
I don't have an answer to your question but I am tyring to do exactly what you have already done.(getting 802.1x working with xp client to acs server) Can you e-mail me the configs you used (client, switch acs)I am also working with tac but are not making progress. One thing i notice is that the switch port I am using is yellow and shows up down. is this normal behavior when the port is configured for 802.1x?
Thanks, Tom [email protected]

[SOLVED] Encryption hook doesn't prompt for key

I'm trying to dual boot an encrypted arch (64bit luks encryption without lvm) and windows 8 on uefi. Everything installs pretty smoothly until it tries to decrypt the root partition, it doesn't prompt for the passphrase. Using a g55vw laptop, there's a wiki page for it apparently which I've been trying to follow. When I search for related problems most people solve it by moving the encrypt hook around but I've found that doesn't help
(yes I run mkinitpio -p linux).
My output when grub loads arch:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [keymap]
:: loading keymap . . . done
:: running hook [encrypt]
Waiting 10 seconds for device /dev/mapper/root ...
Waiting 10 seconds for device /dev/mapper/root ...
ERROR: device '/dev/mapper/root' not found. Skipping fsck
ERROR: Unable to find root device '/dev/mapper/root'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
/etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptsetup=/dev/sda2:root"
GRUB_DISABLE_LINUX_UUID=true
/etc/mkinitcpio.conf
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetec modconf block keymap keyboard encrypt filesystems fsck"
Last edited by DakotaTheGiraffe (2014-09-29 04:31:21)

wow I tried that last install and it didn't work but it solved it this time. Thanks for your quick response

OneDrive for Business sync prompts for ODfB client install

Working with a client that has installed Office 2013 ProPlus on an image that is being deployed. Users currently logon to their computer with a local account (Active Directory in process of being deployed).  User is "migrated" and begins
to logon to Active Directory. User now logs on to the O365 portal and accesses their OneDrive site, not yet populated with documents. User clicks "sync" and is prompted to install a OneDrive for Business client, even though it has
already been installed as part of Office 2013 ProPlus. Install proceeds and Internet Explorer closes. Once install has completed, user logs on to O365 portal and attempts to sync OneDrive.   User is prompted again to install the appropriate
client.
I have tried clearing IE cache, launching IE in InPrivate mode and using Chrome.   Same behavior.
Any suggestions?
Thanks,
[email protected]

New fun behavior noted:
New behavior. Similar scenario:   User logging on to PC with a local account.   Office 2013 ProPlus, including ODfB is installed.   User is NOT currently using ODfB. Using Word
2013, Excel 2013, PPT 2013, Outlook 2013 ( connecting to Office 365 mailbox) and Lync 2013 (connecting to Lync Online) are being used by the users. Users machine is joined to a domain, User local account profile is migrated to domain profile.
User logs into PC with domain account. ( Matching the Office 365 account, typically [email protected] ). User logs into Outlook and Lync with no issues. User logs into the Office 365 Portal, selects OneDrive, and selects Sync.
"Sync this library to your device for easy access" window appears. User selects Sync now.. User is presented with "Sign in Call us overprotective, but we need to verify you account again before opening "https://realgoods-my.sharepoint.com""
windows. User enter his email address and clicks Next. User is then presented with "Sign In" windows and enters User ID and password. User is then presented with the "Overprotective" window. This happens 3 times
until user gets "We cannot connect to the specified SharePoint site." error message.
IE browser cache has been cleared. Steps have been followed to clear all document cache files. sharepoint.com, microsoftonline.com, office365.com have been added to the Trusted Sites zone and added to IE compatibility list.
Any clues on this one as well????
R,
Dale
[email protected]

Web Analysis Report prompted for relational database login

We have given access to the WA reports and everything works fine in general. One of the user trying to open same report(s) document(s) via Workspace and its getting prompted with relational database login? I have verified for the access and everything seems to be fine.
I do not know the reason for this. Can anyone help me? Thanks.

From the forums, i got the below MAXL commands to sync the user access :
alter system resync sss; --> this command will sync all the users, groups.
alter group <group name> sync security with all application; --> This can be used to individually sync the required group
alter user <user name> sync security with all application; --> This can be used to individually sync the required user
Will check it up with user on any change in her access.
Thanks,
Praveen.

Run report with SSO/OAM by URL without prompt for uid/pwd?

Can I run a report by URL to a report engine protected by SSO/OAM without being prompted for credentials? Asking the same in another way, is there a way to pass the SSO/OAM credentials in the URL (or otherwise) to avoid being prompted for them? I find many references to how to do this for the database connection credentials, but I'm trying to pass the SSO/OAM credentials on the URL. My end game is to be able to run a report from VB.NET from a kiosk application in VB.NET where there is no attendant and client does not want to have to log into SSO/OAM at any time. My VB.NET code will submit the URL, grab the output and manage the work stream (print, save, store to doc repos, etc.) in the kiosk code.
Thanks in advance
Hank
12/29/2014
For the sake of those that come later with this same question:
It turns out there is a way to do this after all. I opened an SR with MOS and with a little trial and error we worked out that the following does work:
http://<theFormsReportsServer>:9002/reports/rwservlet?report=myTestReport.rdf&authid=myOAMUserId/mySSOPasswd&userid=dbUid/dbPwdK@DbTnsEntryName&destype=cache&desformat=html
Note that there are two necessary bits to this in addition to specifying the authid=SSO Credentials part. The first is that you must use the WLS_REPORTS port (9002 in our case), not the OHS port (8888 in our case). The other is that you must provide the database connection. I have done it overtly in this syntax by specifying userid=DbCredentials@Db, but it should also work to substitute the ssoconn functionality in order to hide the Db credentials. That is not an issue in our environment so i have not actually tested it.
Regards
Hank

Hi;
It's been too long since I've done anything in Access. Have a look at this old sample, and see if it helps:
https://smpdl.sap-ag.de/~sapidp/012002523100006013432008E/rdc_vba.exe
Regards,
Jonathan

MDT 2013: bootstrap.ini not applying username and password for share access

I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access. The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
at all.
bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\mydeploymentserver\DeploymentShare$
UserID=myuserid
UserDomain=mydomain.com
UserPassword=mypassword
KeyboardLocale=en-US
SkipBDDWelcome=YES
I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username>myusername</Username>
<Domain>mydomain.com</Domain>
<Password>mypassword</Password>
</Credentials>
<JoinDomain>mydomain.com</JoinDomain>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>eos-vm-02</ComputerName>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.eosmith.org</Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>
... and the bdd.log file appeared not to read the username and password at all:
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>

Basics - Server 2008 R2 - SP1, WDS, MDT 2013
Well all, I've done this at least 20 times today and the deployment share info is still wrong...
Someone else built and messed with this thing so i'm trying to fix it. We have 2 MDT servers and 1 WDS that is on the Production MDT. I've turned the test MDT off.
It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
Very Simple bootstrap.ini
[Settings]
Priority=Default
[Default]
DeployRoot=\\MMPDEPLOY02\DeploymentShare$
UserID=xxx
UserDomain=xxx
UserPassword=xxx
KeyboardLocale=en-US
SkipBDDWelcome=YES
It continues to show up on the client as ||mdt901w8|deploymentshare$ (test server) (pipes for \ since it makes it a link and i'm new)
I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
Any ideas..

No elevation prompt for partition access

Similar Messages

Maybe you are looking for