No enciende tabla hp touchpad

Question

Buenas Tardes.
Agradecería su ayuda en lo siguiente.
Adquiri hace un año una Table HP TOuchpad WebOS.
En estos día se quedo sin bateria y la puse a cargar, pero resulta que no enciende. Probe con otro cargador y tampoco hace nada. Pareciera que dejo de funcionar por completo.
No se como realizar pruebas sobre la Table, adicional que viene sellada.
Agradecería su ayuda urgente.
Gracias.

Answer 1

There are several other threads already discussing this topic, but they all say the same things:
--Check your charger.  Many of the USB cables supplied by HP were fragile, and break easily.  Try another micro-USB cable with a charger that supplies 2 amps (2,000mA).  If using an HP charger, check the prongs on the transformer - they are removable, and if twisted out of position no current will flow.
--Try all the resets - simple (hold both the power and center button for 15 - 20 seconds until the HP logo appears).   Advanced (press and hold the power, center, and volume down together until logo appears.  May give the option to completely erase the unit!)
--Use a TouchStone to charge the device if you suspect the female charging port on the TouchPad has been damaged.  
--As a last resort, try using the tpdebrick-v004 program.  This is a difficult, but doable re-flash of the device using a computer running Ubuntu, and a program from this link.  
http://rootzwiki.com/topic/38786-tpdebrick-v004/
I revived one of my touchpads using this method.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!