No enough iDisk space for publishing the site When I got almost 20G!

I happened to such a problem twice in three days.
When I am going to publish the site using iweb, it informed
"There isn’t enough space on your MobileMe iDisk to publish your site."
But in fact, when I login in mobile me to check, the free space is almost 20G!
Last time, after a few hours, it turned OK without any changing, and now, it happens again....
What can I do to solve it? Thanks.

Welcome to the discussions. If quitting iWeb and restarting it doesn't help, this may:
"In the end i sorted it by publishing my web-site content to a folder on a local drive before returning it to point to MobileMe. This resulted in several pages changing to red as if they needed updating but everything uploaded successfully this time after selecting 'Publish Site Changes'. The blue bar isn't showing as full any more so it looks like iWeb was forced to recalculate the disk space. Panic over, for me anyway. Hope this helps. It shows the issue is definitely with iWeb as opposed to MobileMe."
...Found by doing THIS.
By the way, if your site has a blog, it may have something to do with the problem — consider using a more reliable blogging platform such as:
http://posterous.com/faq

Similar Messages

  • Firefox thinks I don't have enough disk space, and cancels the download when it's almost finished.

    So recently, I was downloading a pretty huge file for a game (4.5 gigabytes), and it was nearly finished, when an error popped up, saying that there wasn't enough disk space for Firefox to download the file. At the time, I had just enough disk space to download the file (yes, I checked and made sure). The download became unresumable, and I was incredibly irked to find I had to download again, as my download speed is not very good at all. I put it in overnight and made a note of where it stopped, and in the morning, when I checked it, it stopped in the EXACT SAME place, which is at about 4.1/4.5 GBs. I've made a lot more room since then, and I'm downloading it for the third time now. If this happens again, how can I solve this? Thanks.
    Also, it's a .dat file. I have no idea if that has any bearing on what may cause this, but if anyone knows anything, please let me know.

    The file system is a FAT32 Bootcamp Partition, and what baffles me is that I've been able to download and store files that are over 4 GBs before. And while I'm at it, why is it that you say FAT32 file-systems can't store files over 4 GBs? I've never heard of that happening before.
    Many thanks.

  • I have an a burning preparation error that says Not enough free disnot k space for encoding the remaining assets. Is this because i don't have enough memory on my macbook?

    i have a burning preraration error that says not enough free space for encoding the remaining assets.  Is this error on my iDVD coming up because i dont not have enough space on my macbook?

    thank you

  • I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites?

    I have created a Muse site for a client that wishes to host with Business Catalyst. How do I publish the site with their account rather than using one of my free sites? This is so I can keep my free ones for personal projects but also so they can pay for their own hosting. I am happy to set it all up for them but not sure what to do.

    Hi
    You can use their BC login details and use them , which on publish the site will be under their account.
    Please change the BC login from Edit > Preferences > Publish > Switch Accounts , for Mac it would Adobe Muse > Preferences
    Thanks,
    Sanjit

  • The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

    When i tried to login in inbrowserediting.adobe.com i see that:
    The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
    What does it mean? What is problem?

    Hi,
    I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
    its saying the following
    "The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
    Yet i Can access my website fine "www.calmwood.com.au"
    My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
    so i am not understanding how it thinks its different. when its fully referenced
    any help would be appreciated.
    thanks

  • HT1583 I'm trying to burn a Magic DVD in iDVD and I get a message stating "not enough free disc space for encoding the remaining assets. How do I resolve this?

    I'm trying to burn a Magic DVD in iDVD and I keep getting a message stating that there is not enough free disc space for encoding the remaining assets. How do I resolve this?

    It means your hard drive is too full to accomodate the project and its many swap files etc.
    You need to move some files (not applications) to your external hard drive, and keep at least 25-30GB free.

  • The Download Assistant said that there wasn't enough disk space for me to download. What do I do?

    The Download Assistant said that there wasn't enough disk space for me to download. What do I do?

    Which operating system are you using?  Where did you choose to download the install files too?

  • IDVD error msg Not enough free disk space for encoding the remaining assets

    I get this error message on iDVD, does this mean I need to free up hard disc space... "Not enough free disk space for encoding the remaining assets"

    How full is your Mac's hard drive?
    Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.  

  • Error msg: "Not enough free disk space for encoding the remaining assets."

    I am trying to burn a DVD that includes a slideshow and short movie.  Total project is 3.5GB.  I am getting this error message:  "Not enough free disk space for encoding the remaining assets."  My hard drive has 600 GB left.  Can anyone help?

    If you can't free up enough space by deleting items, get an external hard drive and move the files there. An absolute minimum of 25 GB is required by iDVD.
    arlenefromcary wrote:
      Is it possible to do this from another source?
    I'm not sure what you mean by that.
    mish

  • Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets.

    Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks

    Hi
    Yes - This is important.
    Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
    My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
    This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
    So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
    • Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
    • External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
    Yours Bengt W

  • My Macbook won't boot up because there isn't enough free space for my start up disk. It's now stuck on a blue screen. How am I meant to delete files to free up space if I can't access the computer?

    My Macbook won't boot up because there sin't enough free space to run the startup disk. My Macbook now won't go past the blue screen so exactly how am I meant to be able to delete files if I can't access the computer?

    Do you have a bootable backup?
    What operating system are you running? If OS X 10.6 or lower, boot from your original OS X DVD or a retail OS X DVD and then delete files as needed. Your goal should be to get to 10% of your disk capacity free.
    If you have OS X 10.7 Lion or 10.8 Mountain Lion, you don't have many choices in recovery mode (boot holding the command and r keys down).
    If you have a FireWire or Thunderbolt connection, you can try target disk mode with another mac.
    If none of those work, perhaps your local Apple store can help with a bootable external drive.

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

    Unable to prepare project for publishing
    The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I fix this???
    I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

    I'm having the same problem. 
    When I export (and I want HD quality) I get the error message that
    Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
    How do I free up more space on my startup disk?  My hard drive has 158.61 GB free.  Do I need to free up more space?

  • I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes  and i have to disconnct it  manually then  a error message telling me that there is not enough disc space for ipad which is not correct  any ideas folks

    i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes  and i have to disconnct it  manually then  a error message telling me that there is not enough disc space for ipad which is not correct  any ideas folks

    i have reset the ipad and restored it to no avail

  • One page in my site has 3 columns but when I publish the site it shows up with 2 columns

    I set up the site with 2 columns per page, except for one page which has 3 columns. I looks right in iweb, but when I publish the site it still shows up with 2 columns like the other pages...any idea how to correct that?

    Clear your browser's cache (Command+Option+E for Safari) and reload the page. 
    What's the URL of your site so we can examine it first hand?
    OT

Maybe you are looking for