No Entries in SMW01 when we create BP in CRM 5.2

HI,
In the process of Integrating CRM 5.2 and ISU , we have done all the necessary MW settings below.
1.      Number ranges and groupings set both on CRM and ISU
2.       Logical systems and RFC Destinations defined for both CRM and ISU .
3.       Industry objects generated successfully.
4.       CRMRFCPAR & CRMCONSUM Settings maintained
5.       Site and subscriptions created for ISU in CRM
6.       PIDE Settings done
7.       We have downloaded all customizing objects from ISU
8.       Queues registered in SMQR
9.       SMQS Setting manually.
Now, when we create a BP in CRM. Its saved with out any error. But no entry in SMW01. No queues generated at all. Hence not flowing to ISU.
Did we miss anything? Pl Give your inputs.
Thank you,
Shaik

I have checked the above settings.
1) BUPA_MAIN initial load is not done because we dont need the initial download from ISU to CRM. We want to upload Business objects from CRM to ISU.
2) Business objects replication is not deactivated on R3AC4.
3) In SM30 CRMSUBTAB, we have 3 FM's ( CRM_BUPA_MAIN_EXTRACT_GUIDS ) for BUPA. But all are Download only.
4) sites and subscriptions are done correctly
5) InTBE11 , the application BUPA is active.
We did some digging in to the issue, the following points might help you in giving some pointers to solve this problem.
1. Only for BP's, the Bdoc's are not generated ( neither there are any queues ). When we create for example, an activity there are entries in SMW01.
2. Can you please check the Note Number: 1064517? Is it because of the Support Package problem for CRM 5.2?
Our SP level for SAP_ABA is currently 011 for Release 700
We think , we have missed out some basic MW setting between ECC and CRM.
Any Inputs are highly appreciated and rewarded accordingly.
Many Thanks
Shaik

Similar Messages

Require entry of metadata when creating a folder in a document library

Sharepoint Foundation 2010 -
While users are required to enter metadata when uploading a document, it would be a tremendous help if they were required to enter metadata when creating a folder inside a document library.
Is there a way to force entry of metadata when creating a folder? And if this is possible, can I create different metadata requirements for documents uploaded inside a folder?
Thanks.

Yes, you will need to create a Content Types that inherits the Folder Content Type, and then assign your new Content Type to your library. The following blog post explains how to do this (it was written for 2007 but same applies for 2010),
http://www.sharepoint-guru.com/2007/06/adding-metadata-to-folder.html
You can create additional Content Types to reflect the different types of files, each with their own set of metadata columns and requirements.
Dimitri Ayrapetov (MCSE: SharePoint)

How to find detail of when/who created particular entry in Z tabel

Hi folks
I have a Z table, and which contain one entry with incorrect data .
Is there any way to find out , that when and who inserted that resord in Z table
Regards
PG

Hi Sandeep,
Thanks .
This entry has not been created by any transaction.
So i am not able to get the when/who created that entry.
One Lead is that, this entry is present in Q system also .
Regards
PG

When we create one service as preferred on both nodes in two node RAC

How to configure listener,tnsnames.ora & listener file When we create one service as preferred on both nodes in two node RAC ... ( I don't need load balancing here but i just want to create service as preferred on both nodes)
please some one help me in this ..

Thanks alot Sebastain for your reply..
I am using 10.2.0.4 version and below tns entry is from my client side tns entry ..
M4AMPRD_TEST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.228) (PORT=1521))
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.229) (PORT=1521))
(FAILOVER=ON)
(CONNECT_DATA=(SERVICE_NAME=M4AMPRD_TEST)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=20)
(DELAY=5)
service creation: srvctl add service -d M4AMPRD -s M4AMPRD_TEST -r M4AMPRD1,M4AMPRD2
But when i connect to database usign above service from client some times its working fine and some times its failing please see below log with timings how it is behaving ..
SQL> set time on
18:39:46 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:48 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:52 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:53 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:55 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:57 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:59 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
Thanks for your help in advance
Anil Vejendla..

Why when I create a object in system automaticlly store in $TMP?

Hi, all
As title, when I create a object in my quality system , always automatically store the object in the $TMP,
I have to modify it from menu Goto->Object Directory Entry-> Change Package.
I hope when I crate a object automatically store in the package NOT $TMP.
Edited by: xuehui li on Jul 9, 2010 4:50 AM

Hi, But when I create a new DTP NO asking me let me create or select a place to store. Just automatically store in $TMP immediately!
So I have to go to menu 'Goto-> Object Directory Entry->' modify the package from $TMP to my working package.
so it is very strange! I think for sure there is somewhere to set up this option to DONOT store at $TMP automatically instead of asking for me store in where.
Edited by: xuehui li on Jul 9, 2010 5:20 AM
Edited by: xuehui li on Jul 9, 2010 5:22 AM

Bdoc error in SMW01 When Loading Materials into CRM

Hi,
We have recently done a system copy of our Production System to our Test System in R/3. We are now in the process of loading the Materials into our CRM 2007 Test System from the newly updated Test System in R/3.
However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
Value X02 is not permitted for attribute Product Group 3 Value X02 - X09 is not permitted for attribute Product Group 3
Area: COM_PRCAT
Number: 20
We have loaded the object DNL_CUST_PROD1 prior to the load of the MATERIALS object
Does anyone know how this issue could be resolved?
Thanks,
Jonathan.

Hi, this error refers to tax customizing so you should check what assingments you have in R/3 and then replicated on CRM.
You can use transaction CRM_TAXCUST_VALIDATE to check the tax errors both in customers and materials.
Then, according to the missing entries you will see on the transaction I told, you shoul check in R/3 tables TSKM and TSTL (used for materials).
In table TSTL you have all the customizing made on R/3 transaction OVK1 and in table TSKM you´ll find the customizing made on transaction OVK4.
The entries made there for your country should be the same ones made in CRM. The customizing path is the following:
SPRO>CRM>Basic Functions>Taxes>Basic Settings>Tax Types and Tax Groups>Assing Tax Groups to SAP ECC Tax Classifications (Products)
Here you have to enter the combination of:
COUNTRYTAX TYPETAX GROUPTAX SEQTAx CL (which you should be able to fullfill after checking the R/3 tables I´ve told you..
Please let me know if it helps,
Regards,
Lorena

Prevent time entry in CAT2 when Internal Order or WBS is in TECO status

Hello Team,
We need to prevent time entry in CAT2 when an internal order is in TECO status. Looks like CAT2 is calling business transaction RFBU (FI: postings) which is allowed in TECO.
I'm wondering whether I can isolate CAT2, so that we can prevent just the time entry. Any suggestions, please.
Thanks!
VJ

Hi,
Try creating a user status which will prevent the posting when WBS Status is TECO.If not, use the many user exits available in CAT2 and put in a custom code check for the status.
Regards
Sreekanth

Different G/L accounts are hitting when a create a credit memo.

Hi Experts,
This scenario is a Fixed Bid Contract (Fixed Bid value).
When I create the Credit memo with reference to Invoice it is hitting the wrong accounting entries like Unbilled Revenues instead of Unearned Revenue.
The process here is:
1. Creation fo contract
2. Invoice creation with ref. to Contract.
Customer Account -DR
UNearned Rev -CR
3. Credit Memo Request
4. Credit Memo.
When do the Credit Memo my accounting entries are:
Domestic customer -CR
UnBilled Revenues -DR.
Thanks
ANGKS

Have you checked in Account Determination analysis in VF02- Environment - Account determination analysis- Rev. Accounts.
It will show , why & which combination this Invoice is posted into specific G/L accounts.

Default stock type as quality inspection when i create Stock transport orde

I want default stock type as quality inspection when i create Stock transport order with T-code Me21n.All the settings in he material master are maintained for inspection type 08. (donot wnat to change the stock type manually,it should come as default)Please provide solution.

Hi
This is not QM setting this is Achieved by MM setting in SPRO.
SPRO>MM>purchasing>PO>define screen layout at document level>select UBF(STO) or ME21n>overview>GR/IR control>
select Qulaity inspection--> decheck the Opt Entry click on Display.
This will solve your problem
Regards
Sujit

When I create a user, appears Event ID 3001 and can't recive e-mails

Hi all,
I hope can help me with this issue.
When I create an user in Exchange, the following logs appears:
Failed to generate email addresses based on template "CCMAIL: at MEXDOMAIN01". Additional message: "Failed to find the address type object in Active Directory for address type "CCMAIL:AMD64".".
Failed to generate email addresses based on template "MS:PRODUCTOSF/MEXDOMAIN0". Additional message: "Failed to find the address type object in Active Directory for address type "MS:AMD64".".
The account behavior is: I can send e-mails but I can´t recive.
Any idea?
Thanks, Best regards

Thread is a bit old, but I do not see ANY value in the entry for "disabledGatewayProxy" - it shows "Value <not set>"
I am seeing the same or extremely similar error as the original poster, but I DO see an attribute value in "gatewayProxy"
"gatewayProxy" attribute has those values:
CCMAIL:at [our Exchange domain]
MS:[whatever-Exchange-name]
Here are the errors:
Failed to generate e-mail addresses based on template "MS:***name-0*/***-name1*". Additional message: "Failed to find the address type object in Active Directory for address type "MS:AMD64".".
Failed to generate e-mail addresses based on template "CCMAIL: at ***Our-Mail-Domain*". Additional message: "Failed to find the address type object in Active Directory for address type "CCMAIL:AMD64".".
So, Gen Lin, did you mention the wrong entry, because my "disabledGatewayProxy" attributed is empty; but "gatewayProxy" has those values you mentioned. We did, at one time, have Exchange 2003; way back many years ago; it could be
something Microsoft, in its infinite wisdom, forgot to clean up, when we removed Exchange 2003.
So, is it safe to remove those values from the attribute named "gatewayProxy?"
We currently have one Exchange 2013 server - only one "test mailbox" on it, and I am seeing those errors in the application event log.
We still have 2 active Exchange 2010 mailbox servers - these changes will not "break" our 2010 Exchange servers, right?
Any information is greatly appreciated! Thanks.
tnjman

I want to use gmail calendar as a default instead of iCal when I create new appointments

So, I love the fact that my macbook calendar also shows my gmail calendar items. But I like many of the features that gmail offers over ical. I setup my iphone so that new calendar entries that I create a defaulted as gmail instead of ical. But I can't seem to find out how to do this on my macbook.
I went into the settings (calendar, mail) - tried to disable the icloud calendar, but it tells me that if I do this all my ical events will be deleted. I don't want to go back and fix each and every prior entry before doing this.
Any suggestions on how I can best accomplish this?
Even if you feel I'm best not using gmail over iCal, let me know that too. I'm new to macs - having been a PC developer for over 20 years.
Help?
Thanks!!

I might not have made sense trying to ask this question.
Here's an example: When I create a calendar event on my mac - I can choose, via an event dropdown item, which calendar to apply the event. By default, its set to the iCloud calendar. I am now finding myself clicking this listbox and changing it to my gmail calendar for every appt I create. I was hoping there would be a way for me to have this default to my gmail calendar instead of the icloud.
Does that make better sense??
Thx

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

Settings -> Mail -> Signature and edit it to whatever you'd like.

When I create a playlist and sync it to my iPhone not all of the playlist transfers over. All of the songs are there and are playable they just do not show up on the playlist.

When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

HT2534 when i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

When i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

Apple needs people like you.

No Entries in SMW01 when we create BP in CRM 5.2

Similar Messages

Maybe you are looking for