No entries in /sys/devices/system/cpu/cpu0 ?

I'm running the latest stock kernel 2.6.14.4 with a Sempron 2600+. I don't get any information in the sys directory mentioned above for my cpu. Anybody else have this problem?
I believe that cpufreq is compiled into the stock kernel and so there should be an entry for that under the directory mentioned?
I've been trying to get cpu freq setting to work without success. I'm unable to modprobe the powernow-k8 module or to run cpufreq-set because I'm getting a message about an unknown or unsupported cpu.
Any help would be appreciated - thanks.

You need to modprobe the proper cpufreq_* module to get that information.
It is not built into the stock kernel.

Similar Messages

[Solved] Missing /sys/devices/system/cpu/sched_mc_power_savings

I'm missing two files that are quite desirable on laptop /sys/devices/system/cpu/sched_mc_power_savings and /sys/devices/system/cpu/sched_smt_power_savings. I'm running standard arch 2.6.34 kernel.
Anything I can do to correct that?[wiki][/wiki]
Last edited by magillos (2010-07-11 18:35:51)

I compiled my own kernel and it seems that setting processor_type_and_featured->processor_family:core_2 was necessary instead of default Arch's processor_type_and_featured->processor_family'pentium-pro.

The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe

After installing version 5.1.1 of the Flexmotion driver, and installing f5 update, I got the following message after rebooting the system: The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe. OS is Win NT. I see device in MAX , but can not initialise it, and cannot make firmware update.
I do not se device from NT system menager.

The instructions on the f5 update are not 100% explicit about what to do for NT. The NatMotion.sys file should not be replaced on NT systems, only on the specifically listed OSes. Uninstall and reinstall the 5.1.1 driver along with the f5 update, however only install the components that do not specifically mention a particular OS.
Regards,
Brent R.
Applications Engineer
National Instruments

After 9i (9.2.0.1)Install on Windows 2003 cannot login as sys/sysdba/system

Hello all,
I need to someone's help.
I just installed Oracle After 9i (9.2.0.1)Install on Windows 2003.
I can only login using scott/tiger.
cannot login as sys/sysdba/system
I used Oracle dtabase Configuration Assistant. At the last step it asked me if I want to change sys and system passwords, I did. However, I cannot verify if system took those. The default combinations system/manager sys/change_on_install are not working.
As well as my new passwords.
How can I resolve it?
Thank you in advance,
Sonya

Recall what you used and you should be able to login .
OR
On windows create new password for sys user. This should work for you since you are on windows OS
back up the file in you ORACLE_HOME/database/PWD<SID>.ora
Create a new one using
orapwd file=...database/PWD<sid>.ora password=<new password> entries=5
stop the oracleService<SID>
start the oracleService<SID>
sqlplus /nolog
connect sys as sysdba
Enter password: <new password>
You should be able to login with this new password created
Ss

Entry in ical like -1 effects double entries on other devices after sync through icloud

Entry in ical like -1 effects double entries on other devices after sync through icloud

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Starting up a database when I forgot the sys and system password

Hi,
I want to startup up a database from Oracle Entreprise Manager. I forgot the sys and system password.
If I give the command:
orapwd file=orapwSDB01 password=test entries=100
can I give the password "test" to sys and then to connect with sys with password test as sysdba, and then to startup the database? Are any problems with this command?
Thank you,
Mihaela

Hi,
I have not done this myself, but YES, according to the documentation, thats correct.
ORAPWD FILE=mypwdfile PASSWORD=syspass ENTRIES=10
will set the password of SYS to syspass. And you can use the same further.
But here, you should be in oracle user or the user which owns the Oracle installation.
Also, OS authentication is always supperior than any other authentication.
Regards

MacBook Pro System CPU Spikes When Unplugged

Upgraded to Mavericks a few days ago and,whenever I unplug my MacBook Pro 13" (Early 2011 - 2.3GHz Intel Core i5 - 16GB RAM 1333MHz) and run just on the battery, my system CPU usage goes through the roof which results in my Mac running/responding very slowly and buggy.
However, looking at the iStat widget on my dashboard, it's reporting that my CPU isn't running hot nor does my MacBook Pro feel hot at all. It's also showing that I still have 10GB of RAM free.
As expected, once my magsafe is reattached to my laptop and plugged back in, the system CPU returns to a normal level. In Activity Monitor, it shows kernel_task as being the culprit.
I queried the log as suggested by Linc and TextEdit had something for me:
Dec 10 15:51:31 My-MBP kernel[0] <Debug>: Process Setup Assistant [307] disabling system-wide I/O Throttling
Anyone have any idea what this could be? Seems like it should be a simple software config but I just don't know.
Additionally, I also ran EtreCheck. These are the results when it's running unplugged:
Hardware Information:
          MacBook Pro (13-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.3 GHz Intel Core i5 CPU: 2 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 1 day 18:10:35
Disk Information:
          M4-CT128M4SSD2 disk0 : (128.04 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    SSD Macbook Pro (disk0s2) /: 127.18 GB (68.53 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [loaded] com.barebones.authd.plist
          [loaded] com.github.GitHub.GHInstallCLI.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.oracle.java.Helper-Tool.plist
          [loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [failed] com.extensis.FMCore.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.messagecenter.launcher.plist
          [loaded] com.Logitech.Control Center.Daemon.plist
          [loaded] com.oracle.java.Java-Updater.plist
          [loaded] com.wacom.pentablet.plist
          [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
          [loaded] com.codecm.uploader.plist
          [loaded] com.facebook.videochat.[redacted].plist
          [loaded] com.spotify.webhelper.plist
          [loaded] de.municode.Ephemera.plist
User Login Items:
          ShiftIt
3rd Party Preference Panes:
          Air Display Preferences
          PenTablet
          DivX
          Flash Player
          Flip4Mac WMV
          Growl
          Java
          Logitech Control Center
          Perian
Internet Plug-ins::
          OfficeLiveBrowserPlugin: Version: 12.2.0
          AdobePDFViewerNPAPI: Version: 10.1.8
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          AdobePDFViewer: Version: 10.1.8
          googletalkbrowserplugin: Version: 4.9.1.16010
          AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7
          iPhotoPhotocast: Version: 7.0 - SDK 10.7
          QuickTime Plugin: Version: 7.7.3
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6
          WidevineMediaTransformer: Version: (null)
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
          DivXBrowserPlugin: Version: 2.2
          OVSHelper: Version: 1.1
          Silverlight: Version: 5.1.10411.0 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.2.4
          o1dbrowserplugin: Version: 4.9.1.16010
          SharePointBrowserPlugin: Version: 14.1.0
          WacomTabletPlugin: Version: WacomTabletPlugin 2.0.0.4
          JavaAppletPlugin: Version: Java 7 Update 11 Outdated! Update
          WacomNetscape: Version: 1.1.1-1
User Internet Plug-ins::
          WebEx64: Version: 1.0 - SDK 10.5
          SlingPlayer: Version: (null)
Bad Fonts:
          None
Old applications:
          Cisco WebEx Meeting Center:          Version: 11.24.32.0 - SDK 10.5
                    /Users/USERNAME/Library/Application Support/WebEx Folder/1224/Meeting Center.app
          Edge:          Version: 0.10.0 - SDK 10.5
                    /Applications/Adobe Edge Preview/Edge.app
          FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                    /Users/USERNAME/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
          Microsoft AutoUpdate:          Version: 2.3.3 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          SLLauncher:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Transmit:          Version: 4.2 - SDK 10.5
                    /Applications/Transmit.app
          VLC:          Version: 2.0.1 - SDK 10.5
                    /Applications/VLC.app
          WhatSize:          Version: 5.2.1 - SDK 10.5
                    /Applications/WhatSize.app
          asannotation2:          Version: 8.25.31.0 - SDK 10.5
                    /Users/USERNAME/Library/Application Support/WebEx Folder/1224/asannotation2.app
          atmsupload:          Version: 4.14.29.0 - SDK 10.5
                    /Users/USERNAME/Library/Application Support/WebEx Folder/1224/atmsupload.app
          convertpdf:          Version: 1.2 - SDK 10.5
                    /Users/USERNAME/Library/Application Support/WebEx Folder/1224/convertpdf.app
          dynamiclinkmanager:          Version: 6.0.0 - SDK 10.5
                    /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
          dynamiclinkmediaserver:          Version: 6.0.1 - SDK 10.5
                    /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               8%          mds
               7%          WindowServer
               5%          Dock
               3%          EtreCheck
               1%          Google Chrome
Top Processes by Memory:
          180 MB          Google Chrome
          164 MB          mds_stores
          131 MB          softwareupdated
          115 MB          Dock
          82 MB                  installd
Virtual Memory Statistics:
          10.52 GB          Free RAM
          2.94 GB          Active RAM
          752 MB          Inactive RAM
          1.81 GB          Wired RAM
          4.31 GB          Page-ins
          0 B                  Page-outs
Does anyone have any ideas on why this is happening or are experiencing anything similar? I can't for the life of me figure out if it's a Mavericks issue or if it's a hardware issue. Any advice would be much appreciated! Thanks!

You're not going to believe this but I just now found a working solution!!!
Thanks to the talents of a man named, Rhys Oxenhams, and his flawless tutorial, eveything's running normally now!
BEFORE READING ON...make sure you backup all of you data! I take no responsibility for anything bad that happens to your machine. I'm providing this information because it worked for me. There's no guarantee it will work on your system. TAKE ALL NECESSARY PRECAUTIONS BEFORE READING ON and BACKUP YOUR DATA IMMEDIATELY.
Here's what you need to do:
1. In the Finder menu bar, click on Go and select Computer. 2. In the window that comes up, double-click your computer's HD. For me, it's Macintosh HD. 3. From there, click on System > Library > Extensions. 4. Now look for a file called IOPlatformPluginFamily.kext. 5. Right-click on IOPlatformPluginFamily.kext and choose Show Package Contents. 6. In that new window that comes up, click on Contents > Plugins and locate ACPI_SMC_PlatformPlugin.kext. 7. Just like in step 5, right-click on ACPI_SMC_PlatformPlugin.kext and choose Show Package Contents. 8. Just like in step 6, in that new window that comes up, click on Contents > Resources and locate your Model Identifer.
     • In case you don't know what your Model ID is, click on the  in the top left of the screen and choose About This Mac     • In the window that comes up, click on More Info...     • In the next window that comes up, click on System Report     • In the very first screen, towards the top, locate the entry Model Identifier          - Write this info down on a piece of paper. You will need it. In my case, I wrote down MacBookPro8,1 9. Back in the Resources folder, locate the .plist file that has your model identifier. In my case, it was MacBookPro8,1.plist 10. You're not going to delete that file but instead move it to a differnt folder inside your home folder--doesn't matter which folder, just put it somewhere inside your home folder. 11. Restart your machine and you are good to go!
Let me know how it turns out for you. REMINDER: Backup your data before doing this!

I forgot sys and system password

Dear All,
I installed oracle database 9.2.0.6 one year ago and I am using this database for RMAN.
Today I need it to do something else but I really forgot the sys and system password and i dont know what to do.
I appreciate your help on that.
Thanks

Hi,
>>I really forgot the sys and system password
Really ? or are you trying to hack the database ? :-)
You can try this too:
Use the orapwd utility in order to re-create the SYS password...
e.g.: orapwd file=orapw<SID> password=adm entries=5
Cheers

Forgot SYS and SYSTEM password

Hi all,
I have forgotten the password for SYS and SYSTEM. Is there any way to reset their pwd?

It depends on what authentication you use
IF you have something like remote_login_passwordfile=NONE then it will be OS authentication in that case
you can use
cmd>sqlplus "/ as sysdba"
login to sqlplus change the password
If toy have something like remote_login_passwordfile=SHAREDor EXCLUSIVE then
frm cmd>orapwd file=<name> password=<pwd> entries=5
will do that for you
Correct me if i am wrong

My system CPU goes to 80%

My system CPU goes to 80% and then it gets really slow. and then i have to switch all the applications off and wait for a minute till it goes back down again.
I have a Mac Mini i5 chip from late 2012, 4gb ram and 500gb storage.

Hello,
Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens & which App(s) or Processes are using it.
Also...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Error: SYS-170101 System Exception Signal 6 occurred in the context.

Hi,
The following error appears while executing a job.
SYS-170101 System Exception <Signal 6> occurred in the context.
DS version: BOXI 3.2
Source: Oracle
Target SAP BW
Job Server is on AIX
Has anybody dealt with this error? Any suggestions wil be a great help.
Thanks in advance.
Hitesh

Hi Expert,
I am also facing same error, can anyone please let help in it?

Error while creating source system entry in SAP BW system

Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
Gaurav

I would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on

2011 Mac Mini, 10.8.3, SSD - System CPU at constant 10%, frequent 0.5 sec cursor freezes

Hi. I have a Mid-2011 Mac Mini with 8GB of RAM. I have an SSD installed in it as the primary drive, along with another internal 2TB drive and an external USB 2TB drive for media. This machine is mostly used as a media server and player. It's been running Mountain Lion since I bought it (refurb) last year. I upgraded to 10.8.3 as soon as that came out, and was running for a while without any problems. This evening, though, I started to notice some problems.
The main issue is that the CPU (well, one core) seems to be constantly under load. Under Activity Monitor I'm watching the system load (but not user load) hover between about 8% and 12%, all of the time. But looking at the program list, I don't see anything taking up more than about 2% of CPU, and that is taken up by Activity Monitor itself.
The annoying way that this manifests itself in the UI is that if I'm just randomly moving the cursor around in a circle, I can watch it periodically hang and freeze for about half of a second every 3-4 seconds or so. Meanwhile, everything else on the system also seems to freeze up for about half a second at the same time, which makes watching Netflix extremely irritating. (With Netflix the sound plays as normal, but the video freezes briefly every few seconds - I verified this in both Firefox and Chrome so I doubt it's a browser thing.)
I've already tried some troubleshooting steps myself. (None of this has worked yet.)
I saw a lot of messages in console about "mdworker deny mach-lookup com.apple.ls.boxd", which googling around for led me to this page; per the instructions there I booted into safe mode, waited a bit and rebooted, and now I don't see those messages any more. (I didn't mess with the sandbox.sb file, about which, really? Apple implemented this in Scheme or something?) Just to be on the safe side, though, I disabled Spotlight indexing with sudo mdutil -a -i off.
I opened Disk Util and ran a verify on all three disks, no errors. I found one or two permissions that needed repairing on the startup SSD and repaired them. The problem persisted. I also cleared out my caches with Maintenance while I was at it.
As a side note, even when I rebooted in safe mode, I was still seeing the same behavior (periodic half-second mouse freezes, system CPU averaging a constant 10% or so in Activity Monitor).
I also spent some time reading this other thread which looked like it had some very useful advice (unlike that poster, though, my Spotlight processes aren't crashing). So I went ahead and followed Linc Davis's first set of instructions in that thread. Here's what I've got for steps 1 and 2.
1. Activity monitor
Highest-CPU process is Activity Monitor at about 1-2% CPU
CPU: User 1%, system ~10%, idle ~90%
System memory: Page outs 0, swap used 0 bytes
Disk activity: Reads in/sec 0, Writes out/sec 0 (these infrequently spike up to about 40 or 50 max)
2. System log
I put up a gist for this here. It's my last 50 messages or so, probably some are coming from the most recent reboot. I can see the "IOHIDSystem cursor update overdue. Resending" messages which I presume are linked to my cursor freezes, but nothing else looks obviously suspicious to me. The stuff about "menucracker" is down to MenuMeters; I uninstalled it and rebooted at one point just to check, but it didn't seem to make a difference so I reinstalled it.
As far as kexts go, the only one I had that wasn't Apple was SoundFlower. I actually need that one, I use it to stream files from Plex, but I went ahead and uninstalled it anyways, and it didn't make a difference. My launchd lists start up sickbeard, sabnzbd, and plex, but I've manually quit all of those and the problem persists, so I highly douby any of them are to blame.
Any advice greatly appreciated. Is there a better way that I can see what exactly is causing the high system CPU load, like can I list processes by number of kernel calls or something? I did try top and ps but I didn't see anything obviously different from Activity Monitor in their output.

Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ???

Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed.

Hello Community
my ULS-logs are flooded with entries like
w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
Searching for solutions did not succeed, as the EventID of ajczh is not found on the web. Anyone had this problem already?
Best Regards
Michael

Hi Linda
thanks a lot for help.
I modified the ULS-logging to include verbose entries. The problem is correlated to Excel Services, which are functioning quite well on our side. Our Topology consists of an application server, 2 WFE and an office app server. We are using the BI features
of PowerPivot via an additional BI-SQL-server in SharePoint-mode.
Right before the strange entry in the logs we are getting these:
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 145c Verbose ServerSession.ExecuteWithSecurityContext: Before issuing a new request to server http://XXXXX028:32843/[guid]/ExcelService*.asmx ServerRequestCount: 1, AllServersRequestCount: 2, workerThreads: 395, completionPortThreads: 400
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End 8k3v Verbose ServerInfo.AcquireHealthCheckPriviliges: Acquired HealthCheck priviliges for server 'http://XXXXX028:32843/[guid]/ExcelService*.asmx'
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51n Medium MossHost.GetEndpointAddress: Server endpoint Uri: http://XXXXX028:32843/[guid]/ExcelService.asmx.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51b Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: About to create service channel in Claims mode.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Excel Calculation Services d51c Verbose MossHost.CreateServiceChannel<IExcelServiceSoap>: Service channel created.
02.26.2014 10:42:45.02 w3wp.exe Excel Services Application Web Front End abpw Verbose ServerSession.GetHealthScoreCallback: About to send a GetHealthScore call to server http://XXXXX028:32843/[guid]/ExcelService*.asmx
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://XXXXX028:32843/[guid]/ExcelService.asmx' Channel: 'Microsoft.Office.Excel.Server.CalculationServer.Proxy.IExcelServiceSoap' Action: 'http://schemas.microsoft.com/office/Excel/Server/WebServices/ExcelServerInternalService/ExcelServiceSoap/GetHealthScore' MessageId: 'urn:uuid:61212e7d-cf02-41ad-9876-2adf17ec2807'
02.26.2014 10:42:45.02 w3wp.exe SharePoint Foundation Topology ajczh High Unable to create the service call usage entry. Exception details: System.ObjectDisposedException: Message is closed. at System.ServiceModel.Channels.BufferedMessage.get_Headers() at Microsoft.SharePoint.Administration.SPServiceCallUsageEntry.Create(Message message) at Microsoft.SharePoint.SPServiceContextBehavior.System.ServiceModel.Dispatcher.IClientMessageInspector.BeforeSendRequest(Message& request, IClientChannel channel)
that's it, unfortunately. These entries are repeating every 15 seconds.
Best Regards
Michael

How to end user session correctly as sys or system user

Hi,
Database version Oracle 10.2.0.3
We have to end user sessions to update database content. We cant stop/shutdown the instance but we have to assure that some users are not logged on.
So we are looking for a solution to end some arbitrary user sessions as sys or system user without using the KILL USER SESSION option. We want to assure that the user sessions end correctly.
Is there a possibility or a command in Oracle 10g to end a user session correctly ?
Thanks for your assistance.

http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_2013.htm#i2053602
I think DISCONNECT SESSION Clause is what you are looking for.
Let us know if this is not the case.

No entries in /sys/devices/system/cpu/cpu0 ?

Similar Messages

Maybe you are looking for