"No entry for BW_USER in table RSADMIN available"

Transaction "RSA1" -> "Source Systems" section. I right-click "BI" and choose "Create". I get the error:
"No entry for BW_USER in table RSADMIN available"
What does this mean and how do I resolve?
I did some searching. Someone recommended this: "rsa1->settings->global settings->glob settings". But I can't find "glob settings" or anything similar.
Also, I have one BI source system already defined, but I can't figure out a way to create a DataSource for it. I choose "Display DataSource tree", and when I right-click, I get "Replicate Tree Metadata" and "Replicate DataSources" but no option to create an application component or create a new Data Source. How do I do this?

Worked for me as well..
Thanks Srikanth
Reg
Mukesh

Similar Messages

Creating source system: No entry for BW_USER in table RSADMIN available

Hi,
When i try to create source system in RSA1, when I choose SAP system from Release 3.0E (Automatic creation), I get this message:
No entry for BW_USER in table RSADMIN available.
What do I have to do to create source system.
RFC connection are already made.
Best regards,
Uros

hi Uros,
you need to maintain ale user,
rsa1->settings->global settings->glob settings
enter bw user ale. normally ALEREMOTE is used.
oss note 410952
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps.

What is mean by "No entry for BW_USER in table RSADMIN availablea'

Hi All,
While creating Source system in my system i am getting this message "No entry for BW_USER in table RSADMIN available" , What is mean by this?
Reply back me to [email protected]
Regards,
Kiran

hi Kiran,
means no aleremote user maintained for bw, you can maintain via rsa1->settings->global settings->glob settings enter bw user ale. normally ALEREMOTE is used.
Creating source system: No entry for BW_USER in table RSADMIN available
hope this helps.
oss note 410952
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Error in Source system-No entry for user in table RSADMIN Available

I have a user id with SAP_ALL
But when i try to create source system, i am getting the follwoing message
No entry for <user> in table RSADMIN Available

hi,
use the transaction rscusta
create user and enter the user
BW User ALE ALEREMOTE
or
rsa1 --> setting --> global setting ...
Regards
Ben

Usage of 'Select for all entries' for dynamic internal tables..

Hi all,
I have a situation where I need to use select for all entries for a dynamic internal table.
select * from /BIC/AZHSD_O1500 into i_table for all entries in <b>Dynamic_table</b> where doc_number = <dynamic_table????????>
here iam not knowing how to match the <dynamic_table????????> doc_number ?
the dynamic_table contains the doc_number as one field.
here dynaimc_table is the internal table which is dynamic.
I have tried various options but couldnot find the solution.
Please resolve.
Sidhartha.

data : i_dyn_where type char72 occurs 0.
field-symbols : <fs> type table.
assign itab[] to <fs>.
i_dyn_where = 'docno = <fs>-docno'.
append i_dyn_where.
select *
from   vbak
into   table t_vbak
for    all entries in <fs>
where (I_dyn_where).   "Populate this where condition dynamically too
Hope this will solve ur prob.

Data entry for Z... table

I created a table with 3 fields and want to maintain its data. I know that use SE54 and then SM30 to do that, but I got this error when I tried to maintain data in SM30.
View/table ZREGION can only be displayed and maintained with restrictions
Message no. SV792
Diagnosis
You tried to call a maintenance dialog for the view/table ZREGION, for which the table maintenance is only allowed with restrictions. You can only edit the data in the environment of another program or a view cluster.
Could anybody give me a step by step solution for a user table? Any replies are greatly appreciated!

Hi,
I think while generating the table maint, you have chosen the option.
Just relook at the Table maint, and change this property.
That should fix the problem.
Regards,
Ravi
Note : Please mark the helpful answers

T77RCF_SMASK table entries: Error - Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071

Team,
Table T77RCF_SMASK has reference to T77RCF_SMG_ASM.
When compared the two tables we found that following entries are missing in T77RCF_SMASK:
71
72
73
74
75
78
92
95
96
Can you please guide on what should be the entry for these in table T77RCF_SMASK? Would appreciate if full table entries are shown in answer for future users.
Missing entries are causing error "Customizing table T77RCF_SMASK contains no corresponding entry for SMASK_ID = 0071 and so on in SLG1 logs display.
Regards
Yash

The table enteries should be as attached
Regards
Khalid

In BDCP table I am not getting any entries for EKKO,EKPO,EKBE,EKET,EBAN

In BDCP table I am not getting any entries for EKKO,EKPO,EKBE,EKET,EBAN tables.
But there are entries for many other tables.
I have got objects for EKKO,EKPO,EKBE,EKET,EBAN tables from TCDOB tables.

Hi Avishek,
Let me explain the meaning of Change pointers.
If you have entry in BDCP table for MARA, that means everytime a material is created in MARA table in one system, a corresponding Material is created in another system which is connected to the current system VIA ALE. and whenever you change that material in your source system, then the change is propagated to the target system also(If you have done the change pointer set up).
The you do not have entries for other tables becuase the configuration for change pointers is not done for those Objects(In your case the change pointers are not defined for Purchase Orders and hence no entries in BDCP table).
Regards,
Ravi kanth Talagana

Table data getting locked for multiple user for a Z-table updation after EH4 to EHP6 Upgrade

Hi,
We have one new upgraded system at EHP6, earlier system was at EH4 where multiple user can Run one Z T-code and can edit the entries for the Z-table.
This Z-Tcode is calling SM30 internally for updating the Z-Table.
Now in the upgraded system, when one user is into the transation code, and other user runs that T-code, systems throws a POP-UP mesg saying that the data is locked and can be displayed only(can not be edited).
I have debugged the code in both the environment and found that there is one statement Call C_ENQUEUE ID < > field. for which the Sy_Subrc is coming as 2 in the upgraded system which is causing the issue, where as the sy-subrc is 0 in the system at EH4 level.
Can any body tell me why this Z-tcode is not allowing to be accessed by multiple user at same time for Editing(updating the table) .
Regards,
Archana Jha

Hi,
When you create the lock object you can define the keys.
and then you can use those in the ENQUEUE function.
Regards.
regards.

HELP NEEDED: Use a new record for a customized table as a workflow trigger

Hi SAP Workflow Gurus,
Good day!
One of our requirements is to have the creation of a new record in a custom database table trigger a workflow. I read and followed the steps as indicated in this link
http://www.****************/Tutorials/Workflow/Table/events.htm
As a summary, here is what I did:
1. Created a subroutine for the custom table ZPA2003 for the create event
2. Defined this event as a trigger for the custom workflow WS90000019
3. Maintained and activated the event linkage via SWETYPV
Basically I tried following the instructions indicated on the link
Note that the entries for the custom table are created via a function module.
Now during testing of the workflow, the system was able to complete the notification message. However, when I triggered the event via creation of the entry in the custom db table nothing happened
1. Is there a way to debug/find out whether the link between the subroutine in the table and event itself are connected?
2. I also tried running the event trace to check the activities executed but found nothing.
Can you guys help me check on what I may have missed out?
Regards,

Hi All,
Basically these are the requirements for the work schedule substitution:
1. Employee enters the request via ESS (custom portal transaction)
2. Upon saving of the entry (request) in a custom table, this should trigger the workflow at the backend
3. The Manager should then receive a work item in his Universal Worklist at the MSS side of the portal
4. Upon clicking on the work item, a new screen will pop up showing the work schedule substitution details as well as an interface which will allow him to enter his/her usage decision
5. Depending on the decision, the workflow must execute the necessary notifications as well as changes in the custom and PA2003 tables
Now, we have accomplished step 1 and I am currently in the process for step 2. Now I have some queries:
1. For the Manager to view and approve the substitution details, I used two methods for each process (view and approve) since our ABAPer mentioned that this cannot be done in 1 function module. Is there a way to simplify this step or is it really valid that they need to be executed in 2 different methods?
2. As per our ABAPer, function Modules only import and export variables; they do not have the facility of say having tags on the details being displayed. Hence, if the details are 10001 (Employee Number), 10/20/2011 (Start Date), 10/25/2011 (End Date) the output would be 10001, 10/20/2011, 10/25/2011. Is there a way within the function module (or dynpro interface) to show it like this: Employee Number: 10001
Start Date: 10/20/2011
End Date: 10/25/2011
3. Speaking of dynpro applications, do I need to still develop one to allow the Manager to view and approve/reject the request via the MSS portal upon accessing the work item via the UWL? How would the work item go about calling the dynpro application? or is this even possible?
It would have been easier if the facility would not pass through workflows since it will be just direct web dynpro/ABAP calls. Having to include it as a work item in the UWL puts a certain twist to it
Your inputs are well-appreciated.
Regards,

Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE

Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks.

Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks.

Table entry locked at present in RSADMINA

Hi,
I want to update entry in table RSADMINA in BWMANDT field which i change today early morning and now i want to reset it to its
old value so what can i do for the same?
please help

Try if u have acces for t-code se16n . If so go into it , enter the table name.
After that enter &SAP_EDIT.
You will be able to edit,delete,add any data once done save it.
Hope this is helpful for u.

Logical system entry for table entry

Hi,
After system copy from one system name to another , I am facing some inconsistenices in various tables.
The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
Thanks,
Chitta

Hello Chitta,
But when I try to select entries from the same table using SELECT statement, table are not getting populated.
what are you trying to populate?
If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
select * from <SchemaID>.<tablename>
SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
Regards,
Debasis.

Create entry for table FILENAMECI

Hi,
I want to create physical file path for my logical file in table FILENAMECI.
The problem is this table allows maintenance with restriction the I cannot maintain through SE16 or SM30 (for V_FileName).
Please let me know how can I create new entry for this table.
Thanks,
Khanh

Use view V_FILENACI!
Thread close!

Using for all entries of two internal tables in where clause of the select

Hi experts,
My requirement is, need to select Marc-minbe and wrpl-sobst, for all the entries of the two internal tables it_mara , and it_t001w.
here is the select queries i have used,
select matnr normt from mara into it_mara for all entries in it_data where normt = it_data-normt.
select konnr werks from t001w into it_t001w for all entries in it_data where konnr = it_data-konnr.
now i need to select minbe of marc table and sobse of wrpl table for all the entries of above internal tables, it_mara and it_t001w, using both matnr of it_mara and werks of it_t001w in where condition.
Pls advise how i can do it.
Thanks.
Moderator message: very basic, please work on this yourself first, these forums are not a substitute for ABAP training.
Edited by: Thomas Zloch on Dec 6, 2010 9:38 AM

Hi
call SE16 with table TFTIT in order to get a full list (it will be long...)
A list of FMs with parameters can be found in table FUNCT.
Finally go to sm37rsdf4
that will give you all the function modules with description
Here is the list:
http://www.erpgenie.com/abap/functions.htm
hope this helps...
Regards
CSM Reddy

"No entry for BW_USER in table RSADMIN available"

Similar Messages

Maybe you are looking for