No entry in table T503 for "D"

Hello Experts,
while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
Note:
  when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
please tell me what is going on, i am really confused !!
Thanks in advance.

Hi,
1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
4. Maintain the Employee attributes in V_503_C via SM30
In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
hope this helps.
Ajay

Similar Messages

  • No entry in table T503

    Hi experts!
    Iu2018ve created groups and areas of personnel and assigned employee subgroup to employee group by IMG:
    Enterprise structure -> Assignment -> Human Resources Management-> Assign employee subgroup to employee group.
      Iu2019ve tried to hire (PA40) using these groups and subgroups, but it shows an error: "No entry in table T503" for the combined subgroup and group that are not stored in the table.
    The table T503, is the same as Iu2019ve in assigned at SPRO?
    Thanks in advanced!

    Hi Godoy,
    You have not assigned employee Subgroups the attributes..
    In IMG please maintain the entries for the same . Path is as below
    IMG-> Personnel Management-> Personnel Administration->Organizational Data-> Organizational Assignment-> Define Employee attributes.
    Or you can maintain the table  V_503_C in  the  transaction SM30
    Regards,
    Kapil Kaushal

  • Adding entry to Table T503

    Hi
    Pls.let me know what are all the methods available to add new entries to table T503.

    hi murugan,
        T503 table is to create employee subgroup grouping for pcr and CAP .this table is to be filled to do any action .Here we have options like 1,2,3...which should be used depending on the required employees like 3 -salaried employees.You can go through path or go to sm30 and directly u can give these values in this table.
    path is SPRO-pm-pa-payroll data-emp sub group grouping for pcr and cap
    By giving  these values to emp groups the system will considers CAP 's and PCR's  to that emp group ,and does differt caluculations and operations required to do pay roll run to thatPerticular employee group.
    If  you require further information you give a reply.
    If my reply is useful to you pls award me points.
    regards,
    hemalatha

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

  • IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

    Hi,
    I have configure  allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
    Regards
    Subhedar B.

    table t510
    MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART  ENDDA      BEGDA      BETRG
    100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
    100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
    t511
    MANDT    100
    MOLGA    IQ
    LGART    1019
    ENDDA    31.12.9999
    BEGDA    01.01.1992
    ABTYZ       1
    WKTYZ     11
    OPKEN
    ZEINH    030
    KOMBI    2
    BTMIN    0
    BTMAX    0
    ADSUM    X
    MODNA    TARIF
    MODSP
    RUTYP
    RUDIV    0
    ADDJN
    MOD01    1
    MOD02
    MOD03    A
    ANMIN    0.00
    ANMAX    0.00
    V_511_B
    Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
    EE Subgroup grouping   Personal subarea
    0  1  2  3  4  5  6  7  8  9     0  1  2  3  4  5  6  7  8  9
              1                          1  1

  • Problem with No entry in table T591B for 0015 08 E101

    Hi all,
    This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
    When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
    Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
    Thanks in advance for any advice anyone can give me
    Nyree

    Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
    All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101'  for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
    Rgds.

  • No entry in table T001P for key - PT60

    Hi Folks,
    I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
    The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
    In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
    Thanks for any help.
    (rewarded with points)

    HI,
    Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
    If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
    Regards,

  • No entry in table T71ADM10 for key 'X'

    Hello,
    While uploading data from R/3, I get this error message:
    'No entry in table T71ADM10 for key "X"'
    But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
    Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
    Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
    Please advice.
    Thanks & Regards,
    Labanya.

    Hello Labanya,
    As  you telling data is available  in PSA . So  there is need to do update from fro PSA. So Just select that request number  goto RSA1--> PSA. Then find your Request number. Check whether  it has with red mark. Then right click on mouse and select  "start the update immediately". And check  whether you are getting same error or not.
    Thanks,
    Abha

  • No entry in table T527X for E

    Hi,
    The HR IDOCs are ending in error in our production system with the error:
    No entry in table T527X for E
    Message no. RP301
    Diagnosis
    The entry values must be stored in table T527X. The "   E" value(s) are not in this table.
    When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
    The error just started from today and we do not know as to what is causing this error.
    I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
    Can anyone please help?
    Regards,
    Archana

    The IDOC is being processed by a custom Function module but this program was modified
    and the changes were moved to the system last week.
    If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
    I am thinking about the complexity of the Standard Function (which almost processes all
    types of HR master data and how developer must have managed to write Custom code for all of this.
    Quite Complex I think.
    The main change was that in some updation BDC is now used to update the screens
    directly and then PA41 tcode is being called. Do you think this might cause the issue?
    But then it works in reprocessing - strange.
    In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
    (i think).
    Well what all I can say is track the error message while running the IDOC for first time and
    that will only give you the solution.
    Regards
    Shital

  • Entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE '

    Hello All,
    The entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE ' in our ECC system were as follows originally:
    OLTPSOURCE = ''
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    At that point we started using delta extarctor 0PM_OM_OPA_2 and it had a very poor performance.
    SAP asked us to implement note 1040072.
    As a result of applying that note, the BWOM_SETTINGS table has 2 entries for PARAM_NAME = OBJSELSIZE.
    1. OLTPSOURCE = ''
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    2. OLTPSOURCE = '0PM_OM_OPA_2'
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    Things were fine until we added more init selections to another CO extractor, 0CO_OM_OPA_6.
    0CO_OM_OPA_6 deltas were taking around 2 hours for original init selections:
    Fiscal year / period 2007001 2007012
    Fiscal year / period 2008001 2020012
    Controlling Area 3000
    Recently we added more init selections and now selections are :
    Fiscal year / period 2007001 2007012
    Fiscal year / period 2007001 2020012
    Fiscal year / period 2008001 2020012
    Controlling Area 3000
    Controlling Area 4000
    Controlling Area 5000
    The extraction is now taking unacceptably long time, about 15 hours.
    I am not sure if it is because adding more inits.
    I have a feeling the entries in BWOM_SETTINGS for OBJSELSIZE are incorrect.
    According to note 836740 should they be as below?
    OLTPSOURCE = '0CO_OM_OPA_6'
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    OLTPSOURCE = '0PM_OM_OPA_2'
    PARAM_NAME = 'OBJSELSIZE'
    PARAM_VALUE= 'X'"
    One more question. If we change the BWOM_SETTINGS entries to as above, will that affect other CO extractors?
    For instance, we use 0CO_OM_CCA_9 very widely and it runs very fast currently. I just want to make sure we dont mess up its performance by modifying the entries in BWOM_SETTINGS. May be add one more entry in BWOM_SETTINGS for 0CO_OM_CCA_9 too?
    Sorry about the lengthy post.
    Any help is greatly appreciated.
    Thank you.

    As stated in [OSS Note 836740 - Delta extractors CO: OBJSELSIZE DataSource specific|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=836740], there should be parameter OBJSELSIZE entries, with a value of X for the following CO DataSources:
    0CO_OM_CCA_9
    0CO_OM_OPA_6
    0CO_OM_ABC_7
    0CO_OM_WBS_6
    0CO_OM_NAE_2
    0CO_OM_NTW_2
    0OC_OM_NWA_2
    The independent entry, where the DataSource is blank, should also be prsent for the OBJSELSIZE parameter with a value of X. [OSS Note 1040072 - 0PM_OM_OPA_2: Poor performance|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1040072] shows that it's also needed for the 0PM_OM_OPA_2 DataSource.
    Your entries for 0CO_OM_OPA6 and 0PM_OM_OPA_2 are correct. You should add 0CO_OM_CCA_9 and any other DataSource in the list above. If they're not listed, they are supposed to be taken care of by the independent entry (DataSource is blank).

  • How to maintain PO Header Text entry in table T166K for different PO Type

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Spro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
    There are 4 config setting to do for this.
    Read information text.
    regards,nishant
    please reward if this helps

  • How to maintain PO Header Text entry in table T166K for different PO Types

    Hi,
    Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
    Thanks
    Shrikant

    Resolved.

  • No entry in table T556P for key    24000                       at 20130301

    Hi Friends,
    While generating time eveluation i'm getting another issue.
    sytem throwing error as "
    No entry in table T556P for key    24000                       at 20130301
    Person rejected: 00007240"
    Could you please suggest me y system  throwing above error.
    Regards,
    M.Basha.

    Hi,
    Are you using attendance quotas in your solution? Also, are you using a copy of schema TM00?
    If you are not using attendance quotas in your solution, can you comment out the line:
    P2007 TS20  GEN
    Let me know if this is the case or not.
    Thanks and regards,
    Vivek Barnwal

  • No entry in table T551A for key 40 GENR

    Hi Guys,
    Can anyone please tell me what  is the meaning of this error.
    "No entry in table T551A for key 40 GENR"
    I am getting this error while i m trying to set work schedule rule.
    Thanks
    Deepali
    Edited by: DeepaliHCM on Jan 28, 2010 10:27 AM

    DWS grouping , PWS grouping are connected to each other and when you create any work schedule it will get feched from different tables .. if there is no relavancy in the primary keys ,,, here it is 40 then it will throw this error
    please write down on paper whatever grouping you are maintaning in TM configuration ... and check where revancy is missing
    and i think maintaining it on paper for your better reference will not eat your more time

  • No entry in table T512W for key 40 9913

    Dear Guru
    When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
    9913 is the wage type which is getting updated due to INCS rule.
    In the log, 9913 value is same as value of EDLI Contribution
    /3F7 EDLI contri0101                                                    32.50
    9913            0101                                                    32.50
    I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
    Regards
    Vikas K Sharma

    Hi
    I checked the customized WT entry table and there is no 9 series WT at all.
    Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
    Please guide.
    Regards
    Vikas K Sharma

Maybe you are looking for