No entry in the register of Windows 2003 server

Hi,
I just have installed an OAS 10g (10.1.2.0.2) on a windows 2003 server. The ASDB en AS control run good. Everything is OK. Only one thing is very strange. There is no entry in the register.
HKEY_LOCAL_MACHINE =>
SOFTWARE => there is no Oracle. (also after reboot!)
What's happening?

Hi
the error is simple. The path
TFTS02\INTF\RD1\OUTB\MM\RFC you are trying to access is not there so create the path in the FILE transaction.
In file tcode goto NEW ENTRIES and give the path and also make sure that in AL11 the path and the filename you are trying to open exists.
Thanks & Regards
Jyo

Similar Messages

How imstall the BI7 on windows 2003 server

Hi
How imstall the BI7 on windows 2003 server please advise .
thanks in advence
with best regards
jainendra prajapati

Hi,
Just install Netweaver 7.0 system following installation guide on https://service.sap.com/instguides and then after installation finished install BI_CONT add-on.
Then your BI 7.0 system will be ready.
Thanks
Sunny

Error When Finish the Install on Windows 2003

When finish the install on Windows 2003 Server the last check list Oracle Audit Vault Asistant send error:
avca.bat initialize_av -crtscma N -avsysdba ${s_avsysdba} -avadm ${s_avadm} ${s_avauditor} -dvowner ${s_dvownerarg} ${s_dvacctmgr} -jdbc_str jdbc:oracle:oci:@av -dbalias av -sid av -avconsoleport 5700
dont run command.
which i can do. thanks for the help

Hi, Pankaj,
i encountered same problem as you did.
please could you elaborate how you resolve the problem "by passing oracle_sid at cmmond prompt and then starting the database, before that check listner is running or not , if not start listner"
many thanks,
lee

Problem in installing Oracle 9i R2 on Windows 2003 Server Enterprise

We are having problem installing the Oracle 9i R2 Server on Windows 2003 Server Enterprise Edition. During installation, it generates error saying "The IP Address of the machine not found". When clicking the "Continue" button, it tries to install other things but few minutes later it asks to stop complete installation or installation of that feature.
But when we installed it on Windows XP it works fine and we have no problem in configuring it. What's the problem with Windows 2003 Server?
If we drop the idea of installing it on Windows 2003 Server, can we make Windows XP maching as a Server?

ORACLE asumes that the first network device you have on your server has a fixed IP address.
Is this the case?
If not so you should install a loopback adapter as network device with a fixed IP.
Does this help?
Regards,
Lutz

Error in accessing application on windows 2003 server

error on accessing the application on windows 2003 server R12
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
First time i login sucessfully but now its not working.

Hi Mushy;
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.First try to run autoconfig and retest issue. If you have still same error check log file for more details
Also check:
500 Internal Server Error Servlet error:
500 Internal Server Error Servlet error:
R12 Startup Issue
Regard
Helios

Establishing Palm Desktop 4.1.4 connectivity on Windows 2003 Server - using m500

Admittedly, this is a legacy problem solution. I was told by tech support that Palm could not support the m500 on Windows 2003 Server. Via another connectivity solution, I learned that the pnp services needed to connect the palm m500 to my Windows 2003 server could be established. I went to the link:
Installing SSDP and UPNP services under Windows 2k3
(the link url is: http://alantechreview.blogspot.com/2008/03/installing-ssdp-and-upnp-services-under.html)
followed the procedure, then installed Palm Desktop 4.1.4 and was able to hotsync my m500 to that instance of Palm Desktop.
Hope this helps someone.
Post relates to: Palm m500

Thank you for sharing your solution.
Alan G
Post relates to: Treo 755p (Sprint)

BLS not openiing in xMII 11.5 SR01/04 on Windows 2003 Server

Hi,
I'm unable to open Logic Editor on xMII 11.5 SR04.
The OS is Windows 2003 Server.
I've tried with JDK/JRE version 1.4.2_07 and 1.4.2_13 both.
The error message is "Unable to launch xMII".
I've followed all the steps given in xMII installation guide document including additional steps for Windows 2003 server.
Please let me know if anything else is required to check on Windows 2003 server machine.
Thanks and Regards,
Sumit

Hi,
Go to the Java Web Start Application Manager..
File-> Prefrences-> Make sure that Proxies is none.
In Java Tab, select the version which you want to enable ...
In Advanced tab, clear the cache folder and start the BLS...
Hope it will start...
Regards,
Kishore

Windows 2003 Server reboot but not unexpected, couldnt find the trigger for reboot

Hi All,
I have windows 2003 Server 32 bit,std. Which is getting rebooted every 2 days once at 5 AM. I couldnt find the cause for the reboot. Need
I dont see anything in system log apart from event 6006 (event log service stopped).
Enabled advanced Auditing , nothing suspecious found.
No scheduled task or job.
Antivirus scan is clean, no internet access to the box.
Its Virtual machine, all other VM's hosted on ESX server (where the machine with issue hosted) are working fine.
Removed all users admin rights.
Disabled NIC to check if the reboot intiatation happening from network, however server still reboots at 5.
Run process monitor and saved the file at 4:59:38 AM (just before the reboot), nothing supecious found.
Its used for build , various versions of Visual Studio is installed on the box and other tools are installed too.
However could not find a reason or log to find what is causing these reboot.
Need a direction on troubleshooting this urgently.
In application event log i see below.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: ExitWindowsEx executed succesfully!.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: Initiating FORCE REBOOT.

Hi,
I agree with Dave Patrick, please confirm there have any software trigger the Windows restart API, and please refer the following hotfix scenario applied to your environment
or not.
More information:
You may experience an abnormal shutdown on a Windows Server 2003-based computer after the Windows logon screen saver starts
http://support.microsoft.com/kb/916719/en-us
Why Windows NT Reports 6005, 6006, 6008, and 6009 Event Log Entries
http://support.microsoft.com/kb/196452/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

The old allowing oracle 3GB virtual memory on windows 2003 server question?

Hi all,
I have a 9.2.0.7.0 database on windows 2003 server (32bit). 4 dual core cpu's and 16GB of Ram.
I have set .use_indirect_data_buffers=TRUE and *._enable_NUMA_optimization=FALSE.
The db_block_buffers is set at 4GB.
Shared_pool 200MB
Large_pool 56MB
Java pool 56MB
PGA is currently at 400MB
AWE_WINDOW_MEMORY is set at 720MB (which is the lowest I can set it)
At the moment there are various jobs running on the database and no users logged on and the virtual memory is at 1.8GB.
The problem is as soon as the users logs onto the DB the virtual memory goes over 2GB and we see the error 'ORA-04030: out of process memory when trying to allocate 2416 bytes'.
Now I have edited the boot.ini with the following parameters:
multi(0)disk(0)rdisk(0)partition(1)\WINNT="UBS WSP - Wintel Server Platform with PAE" /fastdetect /PAE /4GT
because the /3GB parameter switch started the server with lots of errors.
The oracle.exe process still seems unable to go over the 2GB limit with getting 'ORA-04030' errors.
Can someone tell me if I have missed anything? Or a reason why oracle is not using the switch?
TIA
Eddy

Satish,
see metalink Note:1036312.6 : Utilizing Up to 3GB Virtual Memory on Windows.
it says :
"The 32-bit versions of the Windows® 2000 Advanced Server and Windows NT Server 4.0, Enterprise Edition, operating systems were the first versions of Windows to provide applications with a 3-GB flat virtual address space, with the kernel and executive components using only 1 GB. In response to customer requests, Microsoft has expanded the availability of this support to the 32-bit version of Windows XP Professional and all 32-bit versions of Windows Server™ 2003."
of course, we mustn't be mistaken with the AWE switch (/PAE) that is not available for standard edition.
http://support.microsoft.com/kb/291988 ==> tells more about what can be supported
regards,
marc

OS 10.3.9 and Windows 2003 Server - Can't get to the network

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

Adding disk to existing disk group in ASM on the windows 2003 server.

Guys,
Can someone please share some opinions of adding an extra disk to an existing disk group ( DG_FRA ) in ASM on a windows 2003 server ( like any issues when bringing db backup ). This is a production database and I want to be careful , so that I don't have any issues with the database. Existing DG_FRA is 550GB ( size of the image copy is 325GB ),recently we have been running heavy loads and this is filling up the archive logs and forcing us to take incremental backups couple of times before deleting the archive logs. As a result of this we decided to add an extra 200GB so that we don't have to do this backups frequently during the day. Storage is on EMC SAN and the database is in 11G.
Thanks for all your help.

There will not be any issues..
stamp the disk and then add the disk.
You can also follow this approach -
stamp the disk.
create a new group and then add a datafile in this new group for the existing tablespace.

AR: How to default two debit entries in the AR transactions window

Hi,
Is it possible to default two debit entries in the AR transactions window - invoice processing. How is it implemented?
Thanks!
Regards,
Mangvoc

Hi,
Generally, in AR, only one Receivable Account is debited irrespective of no. of Revenue or Tax lines.
But using SLA Setup, we can generate multiple Receivable lines.
We in our project, used Multi-Fund Receivable JLDs in SLA Setup to do that. these are generally used by Public Sector companies for Fund Accounting.
Please refer to Receivables User Guide. Multi Fund examples are provided in the last section.
There are two ways to generate Multiple Receivable Lines. Balance Method and Account Method. Pls refer to SLA User guide also.
regards,
guru

URGENT - Change the timestamp on Modified access on folder in Windows 2003 Server

Hi
How can I change the time stamp (for modified access )on a folder on a Windows 2003 Server folder?
Thanks

I think it could be done with script. See if this article could help:
How Can I Change the Last Modified Timestamp for All the Files in a Folder?
http://blogs.technet.com/b/heyscriptingguy/archive/2007/02/13/how-can-i-change-the-last-modified-timestamp-for-all-the-files-in-a-folder.aspx
If you have any feedback on our support, please send to [email protected]

Reinstalling Windows 2003 server while preserving the SAP installation

Hi Experts,
I need your expert advice over this.
Is it possible, and if so how, to reinstall windows 2003 server without damaging SAP isntallation. With AIX it certainly is possible but within windows environment I am not sure.
Please comment with suggestion.
Kind regards.

Hi
Is it not possbile with the Homogenious sytem copy?
Export the production data>reinstall windows 2003 server>Import the data again
Regards
Uday

No entry in the register of Windows 2003 server

Similar Messages

Maybe you are looking for