"No entry point for Photoshop could be found"
This error message came out of no where. My Photoshop CC program will not open because "No entry point could be found." So how do I re-install my program. Thanks
Dennis
Do a search here othere have have had that probem and they have been fixed.
Similar Messages
-
Since iTunes updated my PC my other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When I installed CS6 trial version and started from start menu and clicked Adobe photoshop CS6, I get this message.
The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll
How to resolve it?Either your OS is damaged, or doesn't meet the minimum requirements for Photoshop CS6.
-
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Creating second InfoView entry point for SAP users in XI 3.1
Hi All,
I have BOE XI 3.1 up and running with the Business Objects Integration kit SAP Solutions kit I would like to create a second infoview entry point for SAP users on the same physical box (single server) as regular InfoView.
I am trying to mock this up and have detailed the following steps below. I suspect I am missing a few steps (for example, where do I specify the entry port?). I am sure step 2 is wrong, as I the desktoplaunch no longer exists in Xi 3.1
1. Copy the InfoView.war file to a new directory ( Program Files/Business Objects/ Business Objects Enterprise 12.0/java/applications/sap). I imagine I would need to rename the war file (say SAPInfoview.war)?
2. Create a xml file with the following logic (the part in bold I consider to be wrong...):
<Context docBase="Program Files\Business Objects\Business Objects Enterprise 12.0\java\applications\sap\SAPInfoview.war" path="/
businessobjects/enterprise115/desktoplaunch"
crossContext="false" debug="0" reloadable="false"
trusted="false"/>
3. Save the xml file (what name? does it matter) in Program Files\Business Objects\Tomcat55\conf\Catalina\localhost
4. Restart Tomcat
5. Change the web.xml to make SAP security the default. But this should not be the regular infoview web.xml. I'm not sure where this would reside.
Thanks,
Steve
Edited by: Steve Bickerton on Jan 15, 2009 9:19 PMHi Ingo,
You've been working with Duncan and Sartaj on this. The client has two set of users: non HR which has no BW or R/3 authorization restrictions, and HR, which has authorization restrictions.
They have deployed SSO using AD for the non HR users. They also want to leverage InfoView rather than the SAP portal. For the HR users, we therefore need to capture the SAP id and password at login time to enforce security at the BW and R/3 levels. We could use the existing Infoview entry point (SSO will fail and they will be prompted for a SAP login). I do remember that we offered a second InfoView entry point for SAP users in XIR2. I thought this may be more elegant.
Thanks,
Steve -
At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll. I have uninstalled it and reinstalled but it does not fix the problem. Happened after Itunes update I think.
It's a simple fix and doesn't involve reinstalling anything.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When I click on the Mozilla icon on my desktop, I get the error message "The procedure entry point is Threaddesktopcomposited could not be located in the dynamic link library USER32.dll.
== This happened ==
Every time Firefox opened
== I upgraded to the new version of firefox today (7/16/10)This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
http://support.microsoft.com/kb/969155 - On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll” -
REPLICAT ERROR(The procedure entry point long jmp could not be located )
Hi,
I am getting the following error
The procedure entry point long jmp could not be located in the dynamic link library orauts.dll
Does anyone know anything about this? please help.
Thanks
Vi googled to the solution before i got to the answer but thanks anyway... you are right i changed my oracle home yesterday...today i had to reset to make this work...
Thanks
Venkat -
Transport KM rooms as entry point for broadcasting from Portal 7.01 to Portal 7.4 possible?
Hallo together,
is it possible to transport entry points (for broadcasting) from one portal to another?
For our upgrade BW 7.01 to BW 7.4 we want to transport the KM Content (including the rooms).
Transporting the rooms and room structures is no problem, but the transported rooms are not visible in ENTRY POINTS -> My Room Folders.
Only rooms that are newly created in the 7.4 Portal are visible in that folder.
Is there are way to make the transported rooms also visible there?
Thanks and best regards!
ChristianHi Ramakrishna!
I know that WP-PI 6.00 will work fine with R/3 4.6C but my doubt is if I can use WP-PI 6.00 (which is
EP 6.00 plug-in) to connect the R/3 4.6c with an EP 7.00.
I didn´t find anything like WP-PI 7.00 in SAP Marketplace. I´ve already read the note you pointed out but it refers to EP 6.00. It also says you can use WP-PI 6.00 por EP 5.0 or Sap Workplace. But can I also use it with EP 7.00?
Thanks for your help.
Fernando -
Model entry point 'test uuts' could not be executed error -18002
Hi,
I am running a testand(2.0.1f1) sequence of labview (7.0) steps and it is working perferctly in my computer , but when installing testand and labview in another computer and I try to run my sequence the next message appears. "model entry point 'test uuts' could not be executed error -18002"
Is anyone that has an idea of what is happening here?
Thanks =)
ErenHi Eren,
You might try mass compiling the TestStand folders so that all VI's are at the same Version. TestStand 2.0.1f1 installs VI's that are at ver5.1.1
When you run from the Entry Point eg "Test UUTs", before the sequence executions all VI's in all the sequence contained in the sequence file are loaded in to memory.
Look at the error message again, it should be telling you which step in which sequence of the sequence file is not executable.
Hope this helps
Ray Farmer
Regards
Ray Farmer -
Doubt in configuring entry points for iviews
Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
<u>Parameter: Description</u>
displaymode:Specify <i>select</i>
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;<b>/pcd</b> -
Entry points for integrating Openoffice writer into Java swing application
I googled the web and also took a look in below 2 web sites, just seems it is very difficult to get an entry point for me to try my frist application with open office writer integrated with my swing application.
http://wiki.services.openoffice.org/wiki/Documentation/DevGuide/OpenOffice.org_Developers_Guide
http://api.openoffice.org/
What my question is:
1. Where can I get the completed jar files for using the open office writer api for my java application?
2. Is there any step by step practical example for using the api? It seems that the above links are quite messy and difficult to find an entry point to get a start, but just contain many segments separated through out the web site.
Thanks much for any suggestion.Information regarding OOo is not on Sun websites, or in these forums. There may be 3rd-party sites that have some info regarding OOo use.
-
I had to uninstall prior version of iTunes to install IOS5 in my iPhone 4 (relatively new phone, only about 5 weeks old). It took several attempts to install IOS 5, and I finally succeeded only after disableing Kaspersky AV and the Windows Firewall. This, even though the iTunes connection diagnostics reported everything was OK, no errors and all green indicators. I had opened iTunes as Administrator too. So, now I have IOS 5 installed and running ok on the iPhone4, but I have a new problem on my PC that arose from all the different attempts to get this done. Here's more detail on the procedures and system changes I had made on my PC, and then what I get for the error msg.
1) As Instructed by an Apple rep, I UNINTSTALLED both iTunes and Quicktime. I then rebooted and ran iTunes in Admin mode, used the Connection diagnosis (reported all OK) and then tried to install IOS 5 on my iPhone4. The download (which would take between 30-45 minutes on each attempt) would fully complete and then I'd get an error msg of "server timeout". This led to further advice from Apple telling me to try the download again, this time with AV and Firewall disabled. So I rebooted again, disabled AV and Firewall and the IOS5 succeeded.
2) However, ever since I had removed both iTunes and Quicktime and reinstalled (only) iTunes (so far), each time I reboot my pc I get the following:
A Window opens with title: "Apple Sync Notifier exec Entry Point Not Found". Within the box below the title the following error msg appears: "The procedure entry point SQlite3_wal_checkpoint could not be located in the dynamic link library: SQlite3.dll"
I performed a search for SQlite3 in My Computer. It indeed shows up in a number of places, including within an Apple folder.
I'm using 64bit Win7 Home Premium SP1 on a PC with AMD Phenom II X4 945 Processor, 3 GHz with 8.00 GB RAM.
All iPhone and other applications seem to be behaving normally. I just have to hit "OK" to get rid of that annoying (new) error message that is apparently coming about during the PC startup process. It does NOT recur if I put the system in sleep mode, enter and exit iTunes, etc. It only occurs on reboot.I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
Maybe you are looking for
-
I can't preview svg files in bridge cs6 on mac 10.6.8. Help!
Hi, I want to know why can't I preview svg files in bridge cs6 on mac 10.6.8. It's really frustrating as an increasing number of Illustrator files are saved in this format and I need to check through a gazillion of them. Help!
-
Dear Expert Is there is process by which i can know that there exist a condition for particular vendor and material combination, basically i want to create condition records for particular condition type so i will exclude all those records which are
-
HT4946 IPOD IS DISABLED CANT GET TO RECOVERY MODE OR DFU WHAT EVER THAT IS PLEASE HELP
forgot password remember it now cant get recovery mode or dfu mode [whatever that is ]please help
-
Dear all friends, As you probably know if EJB client wants to connect to EJB jar file that deployed in JServer we have to add that .jar file in our classpath otherwise EJB client throws exception.it seems to be owfull that for each .jar file that has
-
I'd like to build the site in 2 languages. I want to come in, then choose language and stay there in one language or choose another one. How to do that ?