No Equalizer (AKA Enhancements tab) For SoundMax Driver

Is there a way I can get the Enhancements tab For my Lenovo ThinkPad T60p?
I really only want an equalizer for when I'm watching YouTube videos and other things that do not have an equalizer.
Also, my graphics card crashes a lot, is this because it is old, I overpower it (I play 3D games), or a combination?

HI @musiclyrics ,
Welcome to the HP Forums!
It is a wonderful  place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your audio is very low and you are unable to increase the overall volume on the system.
Here are two links I think may help.
High Definition Audio Driver will not Install until the Microsoft UAA Bus Driver is Installed
No Sound from the Speakers (Windows 7)
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • No enhancements tab for loudness equalization

    Hi, 
    I've watched several youtube videos and read the same instructions here, on how to increase overall system volume through the enhancements tab and "loudness equalization".  When I go through the steps, both of these are missing.
    I checked to make sure I have the latest sound driver installed, and I do.  (IDT High Definition Audio CODEC). I think I read  that a previous version had access to this tab, but I have no idea how to install older drivers.
    Can anyone help to do that, or is there another way to maximize sound with this model? Why do the factory settings come so low? Is it to get people to buy extenal speakers?
    Thanks

    HI @musiclyrics ,
    Welcome to the HP Forums!
    It is a wonderful  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your audio is very low and you are unable to increase the overall volume on the system.
    Here are two links I think may help.
    High Definition Audio Driver will not Install until the Microsoft UAA Bus Driver is Installed
    No Sound from the Speakers (Windows 7)
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • PMS: Creation of new tabs for reference elements of ENHANCE BADis

    Dear Experts,
    I am on a PMS EHP5 implementation (for all practical purposes, it's an EHP4 implementation as we are not using the pre-defined template) and have the below problem.
    I have the ENHANCE_FIX and ENHANCE_FREE BADIs included at the VA level (as the requirement is to create immediate child objects for the template through these BADIs). I have a reference element (VB) defined for these BADIs.
    Example template (L1 = Level 1, L2 = Level 2, L3 = Level 3):
    L1 - VA
    ---- L2 - VB1
    --------- L3 VC1
    --------- L3 VC2
    ---- L2 - VB2
    ---- L2 - VB3
    In the above example template, the ENHANCE* BADIs will add VBs (example: VB4 and VB5) at the L2 level (appearing in the document below VB2 and VB3).
    The requirement is to have separate tabs for each VB at the L2 level (so I will have one tab for VA and 5 tabs for VB from the above example).
    I am unable to specify creation of new tabs for the reference element VB when I carry out my tabs and process configuration.
    I have not been able to find any information on this aspect either. Would appreciate any help that can come my way.
    Thanks.

    Thanks Maurice.
    I still feel that the product should leave that option to the designer of the solution. There are a lot of solutions which can get chaotic. If designed appropriately, I guess this chaos can be controlled.
    At the very least, I am sure that I have not left anything out in configuration. I will raise this with SAP over a CSS.
    Thank you for your input.

  • Exit/BADI/Enhancement for Payroll driver

    Dear Friends,
    When we run transaction pc00_m10_calc for US payroll driver for an employee for a period,we can see the renumeration statement in the output screen.
    I need to modify the internal table xrt to add the similar wage types in one period before it passes to form , which exit / BADI enhancement should for this purpose.
    Pls. advice.
    Thanks..
    Regards,Prashant

    Hi,
        Please check the below.
    Enhancement
    HRUSRCU0                                Enhancement for Customer Exit for RPCTRCU0.
    Business Add-in
    PC10_PAY0001                            User exit for base_wages in a gross up calculation
    PC10_PAY0002                            Exit to determine if negative taxables should be allowed
    PC10_PAY0003                            Exit to determine if distribution calc should be allowed
    PC10_PAY0004                            Work Tax Area Override Add-In: Activation
    PC10_PAY0005                            Work Tax Area Override Add-In: Default proration of wages
    PC10_PAY0006                            User exit for additional ESS W4 (PZ10) fields; before output
    PC10_PAY0007                            User exit for PZ10 and IT0210 fields; after input
    PC10_PAY0008                            More than 99 exemptions for US payroll withholding tax calc
    Regards,
    Srini.

  • Thinkcentre A51 8136-ksd Soundmax driver for Windows 7 RC

    Hi,
    Someone have the working driver for soundmax sound card on a ibm 8136-ksd running Windows 7 RC. i was trying windows xp/2000 and windows vista drivers and gets error 10.  
    Gilbert.

    I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
    It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4  2.80ghz    2.80ghz       1.12GB ram and im running on windows xp2 professional.

  • I am missing a driver now for soundmax audio driver

     Need to reinstall Soundmax audio driver     .I have a Touchsmart 300-1020. I have an updated version of windows 8.1. I let a third party try to update drivers.  Screwed up everything.  Did a restore and now no audio driver.  Help pleaase.

    Hi:
    Did you try reinstalling the W7 Soundmax driver from your PC's support and driver page?
    Original Analog Devices SoundMAX Digital HD Audio Driver
    File name: sp44371.exe
    Many W7 drivers will work on W8/8.1.

  • No "Enhancements" Tab in Windows 8, Recording Device Properties

    Hi, I just bought my HP laptop, a HP ENVY 15-q008TX, Windows 8.1. Whenever I'm using the microphone, I've found that the microphone automatically lowers its volume when it's too loud. It's obvious there's some auto-leveling going on in the background, be it by my audio driver or Windows. I don't want that and it's problematic when I'm recording audio for work.
    Searching for answers on the internet gave me these common answers:
    1) Turn off auto-audio adjustment in Skype -- Done. However, the auto-leveling issue I'm facing happens in other software, even when I'm not using Skype. So it's not a Skype issue.
    2) Go to Control Panel > Sound > Select "Do nothing" for communications activity. Done, but issue persists.
    3) Go to Control Panel > Sound > Recording Devices > Properties > Advanced > Unselect "Allow applications to take exclusive control of this device". Done, but issue persists.
    4) The last solution I've found is to go to the "Enhancements" tab of Speakers Properties AND Microphone Properties and check "Disable all sound effects". This sounds like a possible solution except that my Windows 8.1 has no Enhancements tab at all for both Speaker and Microphone Properties.
    I then tried checking the Beats Audio Control Panel (that's the audio software my laptop came with) which has barely any options.
    In the "Listening Experience" tab, it doesn't show any auto-leveling option. 
    In the "Recording Experience" tab, it asks me to attach audio device when my headset microphone is clearly attached and it's working and detected by my Windows and other software.
    So at this point I don't know what to do. I suspect there's some audio software issue going on. Any advice is appreciated.

    I do not have any issue connecting a microphone. That connecting error in the screenshot seems to be something wrong with the Beats software itself than any issue between my microphone and the HP laptop.
    To clarify:
    1) My microphone works perfectly and it shows up in Windows Control Panel.
    2) I have used my microphone over Skype with no issues.
    3) I have recorded many audio recordings with my microphone with no issues.
    Where I do have an issue with the microphone, as I have outlined in my original ticket, is that there seems to be an autoleveling or loudness equalization going on where any input audio that goes beyond a certain volume will automatically be softened for 10 seconds, before the microphone increases volume again. I have found this issue reported many times in other forums and apparently it's a common issue, and the solution seems to be to disable the loudness equalization in my Speaker/Mic properties in my audio control panel.
    The issue here is that I cannot find this option to disable loudness equalization at all in my audio control panel, be it in Windows or in Beats audio panel (as I have cited in my original ticket). I would like some help to know where exactly I can find and disable the loudness equalization option in my computer because it has to be somewhere since it has been operating in the background.
    The manufacturer is Sennheiser.

  • IDT Audio ((((Missing Enhancements Tab )))) in Windows Sound Speaker Properties

    I have owned a HP Pavilion G4 2129TX  core i7 3632QM windows 7 ultimate 64 bit.
    last week, my computer crashed in a big way so I reinstalled Windows 7. I figured out all of my drivers and my Sound Works fine. The only problem is that I no longer have access to the   Enhancements Tab in my Windows Sound...
    now my speaker seems too low in terms of sound not like as before.. my IDT driver is already updated but nothing changes. ..Any help to get it back would be appreciated.  

    Hi,
    Whether you have an enhancement tab in the Sound properties window depends on the particular audio driver loaded - some give this option and some don't.
    Try the following.
    First of all, uninstall your current IDT driver from its entry in Programs and Features and when done, restart the notebook.
    When windows has fully reloaded, download and install the version on the following link.
    http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55977.exe
    When the installation has completed, restart the notebook again before checking if the enhancements tab is now available.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Low volume, no enhancements tab to fix issue

    Hello 
    I have a Pavilion g6 HP laptop, running on windows 8. 
    I am experiencing a problem with very low volume. How can I fix this? I have seen in previous questions that this response has worked for people:
    Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    However, there is no enhancements tab on my system! Help!
    Thanks

    Same problem here.. This problem is from years with the hp laptop speakers and they do nothing... That is very irresponsible.. Well, HP you're gonna release some official fix for that or what? Seriously I'm going to switch to dell because of your useless support.By the way why are you doing a support forum when you DO NOT KNOW the answer of the problems? Huh... 

  • No sound recorded on the internal microphone after SoundMAX driver update (Windows XP)

    My internal microphone is not picking up sound after I upgraded my SoundMAX driver (available from the Lenovo website here) to version 5.10.1.571.*  It looks like this was a problem before and was supposedly fixed in 5.10.1.5520 which is included in the version I have.
    I have tested the audio through the Control Panel utility, i.e., Sounds and Audio Devices Properties - Voice - Test hardware.  No dice: my voice could not be detected.  I also tested via the Windows XP sound recorder utility, i.e., Accessories - Entertainment - Sound Recorder.  Same result: silence.
    In the Control Panel's Sounds and Audio Devices Properties, I have verified that the Default device for Audio and Voice (playback and recording) all are set to "SoundMAX HD Audio."  The SoundMAX software that ships with this laptop (also called "control panel") is very scaled back.  There doesn't appear to be anything interesting there to adjust.
    Thanks in advance.
    * I updated the driver because I was troubleshooting my original problem.  My plug and play Logitech laptop speaker suddenly stopped working.  Alas, that problems remains and I have created a new one.

    Hello,
    Here versions of the Audio Features for Windows XP driver that I was able to find:
    5.10.1.5410 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka112ww.exe
    5.10.1.5520 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka114ww.exe
    5.10.1.5670 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka113ww.exe
    5.10.1.5710 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka116ww.exe
    Hopefully, one of these will work for you.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Enhancement Requests for AWM10g

    Hi, before I start in on the enhancement requests I want to say that I am pretty impressed with AWM10g. Definitely a huge step forward in creating AWs. Having said that, I think there are a few enhancements that could be done to the tool to make it even more user friendl.
    Note that these are in no particular order, just ones I came up with while using the tool. I'll add any others that I come across.
    Please don't take this as nit-picking - just trying to help make it better.
    Thanks!
    Scott
    1. On dimension hierarchy types, instead of "value based" call it a "parent / child based" (thats what everyone knows it as)
    2. When creating levels, allow more than one level to be created at a time (currently it closes the dialog after each level is created, forcing you to go back and choose "create levels" over and over again). This may be as simple as having a "Save and create another" button or something.
    3. When typing names in the "system name" boxes, it would be nice if we could simply type the descriptions using spaces, and have the system name automatically replace with an underscore. Right now its a bit tedious to remember to type all names using underscores.
    4. In "mapping" view, move HELP, APPLY, and REVERT buttons off of bottom status bar and up to the top toolbar. There is lots of unused space at the top, creating a second bar at bottom just eats up screen real estate
    5. On "create dimension" dialog, no need for an entirely separate tab for "implmentation details" (that only has two values - generate unique keys or use the existing keys). Put this on the front tab so users don't have to keep selecting over to it (unless of course there are additional values that can show up there?)
    6. Mapping dimensions with multiple hierarchy - seems odd that we have to remap shared levels. Is it possible to make this where you would map all the values in the first hierarchy, and then only map the "missing" levels in the second hierarchy? Seems like an opportunity for hosing things up
    7. Drag and drop ordering when setting up the dimensions in a cube would be nice. Interface is the same as prior version of AWM (pretty clunky)
    8. Bug - when typing in any "name" field, if you highlight the entire field and delete all characters, under the "description" fields only a single character gets deleted.
    9. When there are multiple hierarchies for a given dimension, some sort of visual indicator of which one is set as default (without having to drill into details of each one)
    10. Its difficult (impossible?) to resize panes (for instance, when doing the mapping). Seems like sometimes I click on something by accident (other than the < and > arrows) that resizes the panes, and then I can't figure out how to get them back (other than exiting and restarting)
    11. When writing template out to same name as one that exists, AWM2 is not giving a "do you want to overwrite" prompt
    12. Some sort of clear visual indicator or message when a dimension is not completely "mapped". I had a dimension where I mistakenly forgot to map the leaf level dimension member. I didn't find out about it until I ran a load and the load blew up.
    13. On the XML logging at the end of a load process, the dialog box isn't big enough to show entire error messages if they occur. Since I haven't found a way to actually write the output to a txt file, this makes it hard to debug what is wrong with a solve.

    Anthony - thanks! In the meantime, I've come up with a few more requests / suggestions (and will probably have a few more yet to come...)
    Thanks again!
    Scott
    1) Rather than just showing the "working" bar while a load / solve is going on, would it be possible to replace this with some sort of functionality that queries against the OLAPSYS.xml_load_log table? And perhaps allow the user to click "refresh" or have it auto-refresh at a certain number of minutes so that users can actually see the progress being made?
    2) Since CATALOG view is no longer available, remove the options to have AWM write the log files

  • How to change enhancement tab name iw33 transaction

    Hi,
    I have created one custom enhancement tab in iw33 transaction,but i have to change name for enhancement tab.
    Can you pls suggest me.
    Best Regards,
    Babu

    Hi
    There is a OSS note 1340615 for the same.
    I just copied the same from market place.
    Follow the steps to make the change if the changes can't be downloaded auotomatically.
    1. Start the transaction SE51.
    2. Give program as SAPLCOIH and screen as 1100. Select the radio button (option) 'Element List'.
    3. Click on the change button.
    4. In general attr. for the field 'BTN_PLUS_CUK' change the column 'Vislg' from the value '10' to '13'
    5. Save and activate.
    6. Go back to initial screen of the SE51 transaction.
    7. Give program as SAPLCOIH and screen as 1205. Select the radio button (option) 'Element List'.
    8. Click on the change button.
    9. In general attr. for the field 'BTN_VGD5' change the column 'Vislg' from the value '10' to '13'
    10. Save and activate.
    Shiva

  • SoundMAX driver reload issue - External file required by 7ka114ww_2_.xml ?

    MIGR-67816 has 2 exe's for download. The SoundMAX driver/app install and a 2nd exe that says it is required by 7ka114ww_2_.xml  - But the driver install does not ask for the "external" file at any point.
    How is the 2nd file used? It doesn't appear to do anything when I run it. Where does it need to be copied to for the xml file to reference it?
    Running WinXP SP2 but the driver installer is failing somewhere. I reboot after loading it and the driver errors out saying it failed to load on boot.
    I tried upgrading to SP3 with no luck as well.
    Thanks!
    Phil
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67816
    7ka114ww_inscmd.exe
    24,576
    External file required by 7ka114ww_2_.xml

    Hello philhop, welcome to Lenovo´s forum!
    Please tell us the exact type, not S/N, number.
    That´ll help us to help you.
    Andreas
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Configuring weblogic6.1 for db2 driver

    Hi all,
    I want to access DB2 database from a servlet running on weblogic6.1.But i am unable
    to configure weblogic 6.1 for DB2 driver.Going through the documentation for configuring
    weblogic third party drivers was of no help.when i run the program i get the error
    "no suitable driver found".
    Please post suggestions on how to configure weblogic6.1 for DB2 driver.
    Thank u in advance.

    Ramesh,
    We use code like the following to successfully connect to a connection pool:
    // put the pool name into a properties,
    // in the same way that you would put "user" and "password" in the properties
    dbproperties.put("connectionPoolID", mypoolName);
    Class.forName("weblogic.jdbc.pool.Driver").newInstance();
    myconnection = DriverManager.getConnection("jdbc:weblogic:pool", dbproperties);
    It shouldn't be much different than the code you have where you get the driver
    and then connect directly. But, I do know that what we use works. Maybe the
    pool name has to be specified in the info properties, rather than in the url string.
    (that would be a simple and easy change to your code; to see if it worked.)
    Also, we have found that the CaSe of the DB2 driver name matters:
    COM.ibm.db2.jdbc.app.DB2Driver
    We also put the db2java.zip as the first item in the classpath. (I don't remember
    if that matters or not).
    Craig
    "Ramesh" <[email protected]> wrote:
    >
    Sree,
    In the weblogic 6.1 connection pool configuration i have the following
    settings:
    Name:myPool
    URL:jdbc:db2:database (database is the name of sample database in db2)
    Driver Classname:Com.ibm.db2.jdbc.app.DB2Driver
    Properties:user=db2admin;password=asits9;DatabaseName=database
    ACL name:blank
    Password:blank
    but when i select Target-Server from Targets tab of JDBC Connection Pool
    i get
    the error "Error Occured while processing your request" which is something
    java.lang.reflect.InvocationTargetException.
    in my servlet i establish the connection with the db2 database through
    the following
    codes
    Connection conn=null;
    Driver d;
    d=(Driver)Class.forName("weblogic.jdbc.pool.Driver").newInstance();
    conn=d.connect("jdbc:weblogic:pool:myPool",null);
    ramesh.
    "Sree Bodapati" <[email protected]> wrote:
    Can you show me your standalone program (or just the url, driver name
    and
    properties you use to get connection). Sometimes the url doesnt match
    up
    properly. Do you see any exceptions when the connection pool is getting
    created?
    sree
    "ramesh" <[email protected]> wrote in message
    news:[email protected]...
    Sree,
    I can access db2 from a simple standalone java application.
    but when i create connection pool in weblogic6.1,i think it is not getting
    created,bcos
    when i run the servlet i get the error "Pool connect
    failed:java.SQLException:Connection
    pool myPool does not exist" where myPool is the name of the connection
    pool
    i
    created.i have db2java.zip in my classpath.
    do i have to set some other classpaths also.
    ramesh.
    "Sree Bodapati" <[email protected]> wrote:
    Ramesh,
    If you can write a simple standalone java program to get a DB2 connection
    using the DB2 driver (without WebLogic in the picture). You will findout
    what URL and Driver name to use and what properties to pass to the
    driver.
    Specify these properties in the connection pool properties and make
    sure
    the DB2 driver is in the CLASSPATH when you boot the WebLogic server.
    sree
    "ramesh chand" <[email protected]> wrote in message
    news:[email protected]...
    Hi all,
    I want to access DB2 database from a servlet running on weblogic6.1.But
    i am
    unable
    to configure weblogic 6.1 for DB2 driver.Going through the documentation
    for
    configuring
    weblogic third party drivers was of no help.when i run the programi
    get the
    error
    "no suitable driver found".
    Please post suggestions on how to configure weblogic6.1 for DB2 driver.
    Thank u in advance.

  • Enhanced Point & Print compatibility driver in Windows 7

    Hi all,
    are admin permission needed to install the enhanced Point & Print compatibility driver in Windows 7? The print server is running Windows 2012R2 and the driver type for the printer is V4.
    When a user (non admin) tries to add that printer, a dialog box pops up and asks for trust. Is this the default behaviour?
    Many thanks!
    Nils

    Hi Nils,
    Would you please let me know whether add a network printer via
    Add a printer wizard, then encounter the issue (ask for trust)? Or do any other operation? Just a confirmation, thanks for your understanding.
    Please also refer to following articles and check if can help you.
    Printer Sharing Technical Details
    Configure Print and Document Services
    Assign Delegated Print Administrator and Printer
    Permission Settings in Windows Server 2012
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for