No event raised for BUS2209 Purchase order response

Hi Folks,
Have any of you experiensed that the SAVED event for POR is not raised?
I checked the event trace ( No restrictions) and there is no entry after the POR is saved.
Maybe I'm doing something wrong, but when I save a POR that is manually entered via transaction BBPPCO02 "Enter Purchase Order Response " and it has a variance as the message says, "position 1 price outside tolerance limit"
If I test the start condition i SWB_PROCUREMENT I get a TRUE on both WS14500019 and WS14500007.
Any ideas what could be wrong?
Thanks in advance,
Thomas

Hi
Which SRM version are you using ?
<b>Seems to be a bug in the System.</b>
<u>Please go through the related SAP OSS Notes below -></u>
Note 886529 Start conditions for BUS2209 incorrectly delivered
Note 1112833 Schedule lines deleted
Note875744 BOR BUS2209: Approver list is always empty
Note795107 Order response: No approval workflow found
Note1056889 BUS2209: The list of Approver is not filled correctly
Note1094538 Accept/Reject Response not working from PO Response POWL
Note1060944 SRM60SP02: Workflow various issues
Note 832886 WS79000002: Various errors at runtime
Do let me know.
Regards
- Atul

Similar Messages

  • Purchase Order Response Not able to do by the Supplier from SUS

    Hi Experts,
    During sometimes, the supplier is not in a position to make POR from SUS.
    After selecting the PO from Supplier side, when they are trying to do POR they are not able to either select Confirm (tick mark) or reject (X mark) from their screen which means always those buttons are in greyed mode or no action like Green or Red respectively. What could be the reason ? However, they can see the Send button.
    Please provide me the input to do investigation.
    Thanks
    Rajesh K

    Hi Rajesh,
       If you are not able to respond for PO from SUS then you have to activate the workflow WS14500001.. Here some more workflows you can check for POR
    Workflows
    You can configure the following workflows for the purchase order response:
    ·        (WS14500001)
    Automatic transfer of purchase order response data into the purchase order. The system carries out a comparison during the data transfer (background processing). If the quantity, price, and delivery date variances transmitted by the vendor are within the tolerance limits set in Customizing, and no other variances are transmitted, then the data transfer of the first inbound POR occurs automatically.
    This workflow is relevant for XML receipt or manual entry with subsequent approval.
    ·        (WS14500019)
    If POR data differs from that in the purchase order, you can be informed of this via a work item. As a purchaser, you can decide for each item whether you wish to transfer the data into the purchase order or not.
    ·        (WS14500007)
    If POR data differs from that in the purchase order, you can be informed of this via e-mail (with the number of the purchase order).
    ·        (WS14500017)
    Monitoring receipt of the purchase order response:
    If the flag Purchase order response expected is set in the purchase order, and if by a certain time a purchase order response has not been received for all items in a purchase order, then you can be informed of this via a work item.
    SAP WON'T DELIVER ANY WF TEMPLATE WITH NUMBER RANGE OF '9' BECAUSE 99% CUSTOMER USE NUMBER RANGE 9' FOR CUSTOM WORKFLOW..
    Saravanan

  • External number range for purchase order response?

    Hi all,
    is it possible to use an external number range when creating purchase order responses (BUS2209, PCO, POR) manually?
    If I transfer the POR from an external system like SUS via XML, can I use an external number range?
    I'm using SRM 4.0 (EBP 5.0) in standalone scenario with Business Connector 4.7 as XML interface.
    Any help is appreciated,
    Karsten

    Hi
    No need to maintian Internal number range.. Yes you need to use an external number range
    Only the PO, RQ & RS are sync and therefore must correspond with the R/3 number ranges.
    The rest, Shop Cart (SC), Local PO (EBP), Confirmation, Invoice, Bid Inv and Bid, aren't synced and can be assigned to any number range. (FYI- using ECS)
    Re: Extended Classic - Purchase Order Number Ranges
    http://help.sap.com/saphelp_srm50/helpdata/en/87/7cc73cee4fb55be10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
    Re: Number range config
    Re: config for Number Ranges ? :-(
    Re: PO Creation with external PO number
    Purchase Order Response BUS2232
    PO number range Issue
    Re: Defining the number range
    Regards
    - Atul

  • SRM 7.0: Purchase Order Response (BUS2209) functionality, workflow

    Hello,
    We're trying to configure the purchase order response (BUS2209) functionality. We have configured the BUS2209 document types and numberranges and maintained the 'purchase order response expected' marker for certain vendors. We therefore expected to be able to post a POR via the Purchasing:PO powl however the 'create POR manually' and other 'POR actions' are greyed out. Has anybody been able to post BUS2209 documents in an SRM 7.0 system?
    Also if we look at: IMG -> SAP SRM -> SRM SERVER -> Cross-Application Basic Settings -> Business Workflow -> Define Process Levels  -
    No BUS2209 object is list, no workflow can be maintained (you can't add anything manually either). We have activated the Process Controlled Workflow for all business objects.
    Any help and input is very much appreciated.
    Kind regards,
    Tim

    Hi Tim,
    I did two things:
    1) I activated the start conditions for the three POR workflows as supplied by SAP. I still think this has nothing to do with the problem, but you never know.. The setting is located in the IMG under Workflow -> Application-controlled wfl, or similar (I don't have access to the system right now).
    2) I created a tolerance group Zxxx with tolerance key PR; I used 'limit as percentage' of 5% in both upper and lower limit.  I assigned the key Zxxx to the attribute TOG of a user (with the role /SAPSRM/OP_PURCHASER)  in PPOMA_BBP.
    This caused the options to be enabled. I then successfully created a PO response manually for a PO, which in turn caused a change version of the PO to be created. This change version had to be approved in order for the changes in the POR to be valid.
    Regards
    t7

  • Offline approval for Purchase order response

    Hi All,
    Currently we are in SRM 7.02. we want to know whether offline approval is applicable for Purchase order response (PCO).
    I have searched all available blogs but in Vain. Hope someone can enlighten me in this topic
    Regards,
    Nishanth

    Hi Nishanth,
    We have implemented custom solution for the same in line of SC offline approval process.
    And its working fine in Production environment.
    Check this blog for SC:
    http://scn.sap.com/docs/DOC-56096
    http://wiki.scn.sap.com/wiki/display/SRM/Debugging+hints+for+sending+email+in+offline+approval
    Thanks
    Ankit Jain

  • Error  :  Purchase Order  Response for Service items Different

    Hi ,
    We are getting Error  :  Purchase Order  Response for Service items Different  , when creating the PO in SRM 5.0.  what must be the reason ?
    Thanks & Regards,

    Problem solved

  • SRM - Datasource for Purchase Order Response

    Hi All,
    Is there any standard data source exists for Purchase Order Response in SRM? 
    Since Purchase Order and Purchase Order Documents are different, we require to instal separate data source for POR Document.
    Please help in this regard.
    Thanks,
    Anil

    Found that there is no standard data source for POR Documents, which needs to be extracted with generic extractor.
    Delta will be populated by the FM 'BBP_BI_DELTA_UPDATE' in SRM, which wont support POR object type.
    Reference:
    http://help.sap.com/saphelp_nw70/helpdata/en/ba/a4daa0fe7c4b558206db120b31e555/content.htm
    Thanks,
    anil

  • SRM-SUS Purchase Order Response always "In Status"

    Hi Gurus,
    When a buyer confirms a PO response without any change, the system generates a new PO response with status "In process". And so, when the buyer views the new PO response, the "Confirm Response" and "Reject Response" buttons are still active and the buyer can still confirm the response. When the buyer confirms the new PO response, the system will again generate a new PO response with status "In process".
    We are on SRM 7.0 SP05. We did not activate the following workflows:
    WS14500001  Auto Transfer of PCO
    WS14500019 Transfer PCO Data to PO
    Would really appreciate any help.
    Regards,
    Kezia

    Hi
    XI Seems to be good as the XML message is getting processed in SRM and is creating a POR Document. Here are the steps for configuring POR:
    1. Define NUmber Ranges
    2. Activate Event Linkages and Start Conditions for WS14500001.(this is predelivered in standard system)
    3. Configurations for Tolerances for qty and date...
    Did you process the POR from PO?
    You need to go to Process Purchase Order Response , searched for PORs and then take action on the PORs in pending statuses.....
    POR functionality is pretty much straightforward feature which works smoothly.....If you are not able to sort it out using this forum, write detaisl to SAP, they can look into your system
    Regards
    Virender Singh

  • SRM Purchase Order Response in SRM 7.0

    In SRM 7.0 is there a transaction where a purchase order response to can be entered manually for purchase order or loaded from a spreadsheet?  Or does a purchase order response always require XI?
    Regards,
    -Paul Trauth

    Hi Paul,
    We have to use the SRM portal for all kind of purchase order processing like creation, updation etc,. Can you be more precise in your question, so then we can answer from our side.
    Thanks,
    Nastera

  • BADI-User exit required for updating Purchase order header field -IHREZ

    Hello All,
    We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
    Thanks in advance for your immediate response .
    With regards,
    Joseph Anand B

    TRY using the exist u2022     EXIT_SAPLME59_001
    You can also later on add this field by BAPI_PO_CHANGE

  • Purchase Order Response in SRM from R/3 through XI

    Hello friends,
    While sending Purchase Order Response from R/3 to SRm through XI Iam getting this error in SXMB_MONI of XI and also in SRM:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Response
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>Application</SAP:Category>
    <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText><?xml version="1.0" encoding="utf-8"?><nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global"><standard><faultText>An error occured within an XI interface: Exception occurredE:BBP_PD:069 -Product data could not be intepreted E:BS:013 -System status INCM is active (Purchase Order Response 1000000037) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText></standard></nr1:StandardMessageFault></SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
    <SAP:Stack>The application triggered an exception</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    can anyone please help me out in this...........
    Thanks in Advance...

    Dear Friends,
    I am SAP MM Certified Consultant & did my training for MM Module from Siemens ( Sapient College )& paid 2.5 lac for that and Since then I am working as a SAP MM consultant in an MNC since past 2 years, done 2 implementations  and had a functional experience of 4  years in purchasing .
    Had work for MNC’s only & having good expertise in Domain area .Total Experience 5 years out of that 2 years SAP MM experience .
    Dear all can you tell me what should i do so as to make a successful career in SRM.? How long should i stay in MM and what should I learn besides MM.I have already started working on SRM .
    I wish to do SRM training again from Siemens  but this point of time , I don’t have enough money to do SRM training from Siemens . Could anyone suggest , where I can learn SRM in Bangalore  & get trained in this New thing and do i need some programming knowledge in it.
    Could anybody send me some SRM documentation on my mail id [email protected]
    Thanks in advance.
    Regards,
    Savita Munshi

  • Purchase order response(POR) in SRM

    Hello SRM Experts,
    We would like to implement Purchase order response(POR) functionality of SRM 5.0. The client requirement is to set POR flag at PO item level, expect POR from the vendor and no GR/IV should be allowed either in SRM or ECC until POR is provided by the vendor.
    We have the following questions.
    1. If POR flag is set, does it stop GR/IV either in SRM or ECC?
    2. When POR is posted in SRM does POR flag is re-set in SRM?
    3. When POR is created in SRM, does it create any follow-on docs in ECC.
    Looking forward to hear from you all soon.
    Regards,
    Sasikala

    Hi Sasikala.
    Referring to your questions:
    PO Response is just an acknowledgement document by the vendor to state that he is in agreement with the conditions set in the Purchase Order.
    1) No GR/IV will not be stopped in SRM or ECC. If the client wants it that ways then I believe custom code needs to be written.
    2) No...reason being you can create as many PO Responses as want for a given PO...the latest will be active and all the responses created before that are obsolete.
    3) No follow on documents are created in ECC while creation of PO Response as after the PO Response changes are accepted in PO, only then the PO is replicated to ECC again with change version.
    Regards,
    Abhilash

  • SRM 7.0 Purchase Order Response always in status "In process" after confirm

    Hello experts,
    this problem is similar to the thread [SRM-SUS Purchase Order Response always "In Status"; which has been not finally responded.
    My problem exists in an environment without SUS.
    When a buyer confirms a PO response (POR) without any change, the system generates a new PO response with status "In process".  This new POR has also to be confirmed or rejected but the system generates again a new PO response with status "In process".
    So we have a very nice loop for the purchaser without escape!
    We are on SRM 7.0 SP07. The other thread mentioned that SAP will create some OSS notes, but I found nothing about this problem.
    Any ideas?
    Regards
    Joe

    Hi Gurus.
    I want to share my experience with this case.
    We have the same scenario, Confirm PO, the result is PO confirmed, but we receive a response from ECC and this Confirmed PO changes its status to "In Process" / "En Tratamiento".
    The new relevant information is that we added 2 new fields to the item PO, these fields are filled ok and sent to ECC.
    In a first time these new fields were lost due to the response from ECC. To avoid this situation I implemented the BADI BBP_DOC_CHANGE_BADI for BUS2230, and method BBP_SUSPO_CHANGE to copy from the BBP_PDISC (Object BUS2230) rows the values to the new rows in the same table BBP_PDISC (Object BUS2201).
    With this change the new documents are confirmed directly and not changed to "In Process"/ "En tratamiento".
    That was my experience, now I have a question...
    In the correct business process for SAP SRM SUS  when you confirm full a PO...
    * this will be blocked or no?
    * Can be modified the confirmed items?
    * This depends of customizing?

  • Purchase Order Response in SRM 4.0 through XI

    Hi Friends
    We are working on SRM 4.0. We are sending a PO from SRM to R/3 usng XI in xml format.
    Now we want the Purchase Order Response in SRM from R/3 through XI. How can we achieve that?
    We have used an RFC receiver Adapter in XI to connect to SRM and we have mapped the ORDRSP IDoc to the PurchaseOrderConfirmation Message Type. But in the Message Monitoring of the RWB we are getting an error:
    Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was
    Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was .
    How to resolve this?
    In which format does this PO response should be sent to SRM and How to send this?
    Thanks in Advance....

    Hi Chris
    Thanks for the Response
    But Chris, I have some doubts regarding this.
    What is XI proxy Framework?
    I think the Proxy Framework consists of the Proxy Generator and the Proxy Runtime. The Proxy Framework for ABAP (generator and runtime) is part of the SAP Web Application Server and no specific installation is needed.
    Is the same as XI Framework?
    Dont we require any mapping? Because Iam getting the Sales Order details through ORDRSP IDoc fron the Vendor. So in order to transfer the data to SRM I require the mapping.
    Please Respond Immediately....
    Thanks in Advance...

  • Purchase Order Response in Classic Scenario

    Hi Experts,
    Implementation Scenario- CLASSIC
    SRM Server - 5.0
    Question-
    1) Within Classic Scenario, is it possible for to create Purchase Order Response in SRM for a PO which is already created in backend? This PO is generated by a shopping cart in SRM.
    Best Regards,
    Amit

    Hi Amit,
    You can create POR for a PO which is already created in backend, no matter if its created with reference to SC in SRM. This POR would be done by the supplier in SUS scenario.
    It possible in both, classic and ECS scenario's.
    Regards,
    Prashant

Maybe you are looking for