No export dialog when edit in CS6

When i am clicking rmb and choose edit in cs6 there is no export dialog like i had before ( export with lightroom settings, copy or original)
My cr2 opening in cs without changes i made in LR ????
Pls help find answer, i have a lot work to do

If Photoshop's Camera Raw matches or is more recent than Lightroom's Camera Raw equivalent, you won't get the message box you're expecting when you pass a raw file to PS. You will get that box if you pass a non-raw image file.
In your case, if PS is up-to-date, you won't see that box if you pass a CR2 file. PS will come up with the image showing all the LR edits.
Hal

Similar Messages

Colour issues when editing in CS6

I am currently using Lightroom 4.1. When I "command E" to edit in Photoshop CS6, the image opens in Photoshop with a different colour cast. I have checked and the colour space for both is the same (ProPhotoRGB). My monitor is callibrated with Spyder 3 Express. I have deleted the profile as I assumed it to be corrupt and have re-run the callibration, but no difference. Any suggestions?
Following on from this, I have now discovered the problem, but don't know how to fix it. The images were shot with a Nikon D700. When I go into develop mode in Lightroom, I can see that under Camera Callibration it is set to Adobe Standard. If I export it now to Photoshop, there is a colour shift. If I change it to ACR 4.6, the colours shift in Lightroom and they now match when I export. Can anyone explain what is happening please? Do I have to change the profile to ACR 4.6 before I do any work on each image?
Many thanks,
Gil.
Message was edited by: gilw

It should't happen. Can you post an example?

Keyword problems when editing with CS6

In LR 4.2 and 4.3, when I edit with photoshop and use lightroom corrections, LR creates a new file. I edit it in CS6 and save and close. Back in LR, the file is there, the proper keywords are highlighted and there, but LR cannot find that file. In other words, LR does not recognize the photoshop keywords.
I am using Win 7 64. My catalog has less than 1,000 images. My master catalog has 25,000 with the same problem.
As I understand it, when you edit in Photoshop with LR corrections, LR creates a new file and PS takes in. PS sends info to LR when it is done. If I edit a photo selected with a keyword and I can only see that image, when I get back to LR the screen is grey and no image is found. I can find the photo in the folder.
My workaround is to delete the keyword and reenter. In a small database with few keywords, clunky. In the real world, very difficult.

I have been using lightroom since verison 1 (actually I owned the precursor, I forget the name).
Step by step
1. Select image. Add unique keyword. enter. Keyword is now in the keyword box and highlighted in recent keywords.
2. click on keyword to select all images with that keyword. Highlist the test image.
2. Right click the image.select "edit in ..." "Edit it in CS6..." Then "Edit a copy with lightroom adjustments" (edit a copy- same issue)
3. CS6 opens and the file selected is open. Convert to B&W (anything). Control -s to save. Control - w to close.
4. Goto lightrooom.. New edited image in the folder, but invisible to keyword. The number of images associated with that keyword gets larger by one.
In my system, the key step is step 2. If I add a keyword and edit from the folder everything is fine. If I have selected or filtered by keywords, the edited image does not index for that keyword.
Is this me? I guess my workaround now would be to edit images from the folder view/

LR5.3 edit in CS6 13.0 gets file type wrong

In LR5.3 I have settings for edit in external app set to TIFF file format. When I edit custom file naming for this, it defaults to PSD and when edited in CS6 13.02 it is indeed PSD not TIFF and in custom naming I can't see how to change the default.

This girl here found the fix:
How to Manually Fix Updates on Adobe Photoshop CS6 (from 13.0.3 to 13.0.6) on Mac with Retina Display |
Basically, all you have to do is update the Application Manager (if your installation was like mine, I was still on v.6... it's up to v.9 now. Go here for the update: Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager and run it... when done, launch Photoshop and check for updates.
This is amazingly idiotic, I must add -- how does App Manager NOT update itself through the update process???

Stacking Options in the Export Dialog

What happened to the stacking optons n the export dialog when adding the exports back into the catalog? After watching Jared Platt's creativelive course, I started creating my PSD's by exporting them in bulk, adding them back into the catalog and stacking them on top of the original raw files. After updating to LR 4.2 I don't see the option in the export dialog any more.

It is available in 4.2 on Mac 10.6.8.
As you can see it is 4.2 and "Add To Stack is checked.
Ian, you have to use the "Same folder as original photo" instead of "specific folder".

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

Crystal Reports Formatting issues when exporting to Word Editable document

Version: CR XI, I am editing a document exported from CR to Word Editable
When exporting to a Word Editable (.rtf) document the formatting changes. For example: lines that were drawn in the report do not come across, there is a tab in front of each line and a carriage return at the end of each line and spacing and justification formatting are not the same. Is there a way to export to Word Editable and keep the formatting integrity? This report was developed by a third party but I can edit it if needed.

Pages 5 is, as an early reviewer put it, "an unmitigated disaster." Not only does it lack some 100 feautres that are present in Pages 09 (4.3), it is also VERY buggy, A quick look through these discussions will reveal a painful litany of data corruption, files that cannot be opened, lost data, and other anomalies. Links do not export reliably to PDFs, and, as you've discovered, export to .docx format is unreliable. Sadly, the best advice is to trash Pages 5.1 and use Pages 4.3 or — yes, it's come to that — Word instead.

How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5.

Cs6 audio when editing, touch or write

Hey guys, i am getting used to cs6 after being on premeiere elements 10 for a while., but i cannot get used to the audio when editing,.On prem 10 there was the mixer and when you went along the timeline and used the sliders for the changes it rendered great and all was good, but i am finding the cs6 awful unless i am doing it wrong!! When i make changes using the sliders using the touch setting, i find when i render then i have to do it all again because cs6 is not saving what i am changing in the timeline. Please help...

These AdobeTV tutorials might be helpful:
http://tv.adobe.com/watch/adobe-at-nab-2013/adobe-premiere-pro-audio-enhancements/
http://tv.adobe.com/watch/learn-premiere-pro-cs6/working-with-audio/
http://tv.adobe.com/watch/adobe-and-your-voice/creating-a-music-video/
Good luck,
Hunt

Noisy Exports when editing Native Canon Mark III DSLR

Hello,
I'm experiencing a lot of noise when exporting footage from Canon 5D Mark III IPB footage edited natively. With no effects applied, see how much noise is in the export on the right. original footage on the left. Also a tiny color shift, notice the wall on the right is a hair darker:
It's extremely bad when the image is playing (if I export a video Premiere adds so much noise to the original that I can't show the comparison. Perhaps I'll try to dig up some screen capture software).
There are no effects, I've tried a variety of output settings, always exporting maximum quality, maximum render depth, 20 Mbps, no scaling. I realize it is H264 footage but it should not degrade so much if I'm doing nothing to it.
Any feedback would be appreciated!
I'm working with a 2010 Mac Pro, Mountain Lion, Premiere CC 2014.
Thanks!
Gerry

300Mps is still noisy. Remember, I'm not doing anything to the clip. Color grading compounds the problem. Here's the original vs. 300 Mbps
Here's the original clip from the camera vs. h264 exported out of DaVinci Resolve. Resolve is much cleaner than Premiere:
There is a lot of banding apparent in the Premiere exported clip when it is playing.

Pixelation when editing/exporting

I'm editing an animated short, which was exported from Flash at 1920x1080 as an H.264 mov. The source video looks fine. Final Cut is set to AVCHD 1080i60, but for some reason it's horribly pixelated in many areas, both when editing in Final Cut and when exported to Quicktime. Any idea why?

I set up FC for HDV 720p30, and the same thing happens. I noticed though that on any setting, the quality is degraded slightly as soon as I drag the file into FC, and when I render it gets even worse.
In QT 7:
Imported to Final Cut:
Rendered:
(Sorry for the wall of screencaps)

PSE10 still shows "edit in progress" even when file in CS6 is closed

I have used PSE for years and love the Organiser to store and navigate round my photos. I've considered Lightroom, but have stuck with PSE10.
I've got the trial of CS6 and am considering purchasing. I have a problem though. If I edit in CS6, do my adjustments, save the file then close it, it still shows up as edit in progress in my PSE10 photo well. This happens with whatever photos I edit in CS6. Very annoying as they are then locked. My only option is to close PSE10 where a warning comes up about changes being lost, re open it and all is well.
Why does PSE10 think the photos are still being editied in CS6 even though they have been saved and closed?
Help appreciated

What I have tried is after closing the file in CS6, then opening the file in PSE editor and closing that trying to "trick" the organiser into thinking it has been closed, but no luck.
I have no problem with PSE organiser and PSE editor. As soon as I close the file in the editor it becomes live again in the organiser. This is just with editing in CS6 then closing the file.
After a heavy edit session I will have numerous "edit in progress" messages over my organiser with the only way of clearing to shut down and re open PSE.
Annoying to say the least!
Thanks for your thoughts

LR5 showing Error 1 when trying to Edit in CS6 since migrating to new Mac

Hi. After migrating to a new iMac and uninstalling and reinstalling CS6 and LR5 I'm unable to Edit in CS6 from Lightroom. I'm greeted with a window saying Configuration problem and Error:1. Any advice please.

MMavericks required at least version 10.0.6. We're currently on 10.1.3. If you purchased the software the updates are free. You should also update to 10.9.5, the last version of Mavericks.

Is there a fix for modal dialogs opening behind palettes -cs6 -osx 10.6.8

Is there a fix for modal dialogs open behind palettes in
Photoshop cs6 13.0 (createive cloud update) + OSX 10.6.8 Snow Leopard on MacBook Pro?
( I am using 2 monitors where the second monitor is set to be the menu display. cs4 does not exhibit this bug. )
Toggling the Application Frame off improves the hiding 'feature' but this does not include the desired continuous floating in front of palettes in all circumstances.
An example is Blending Options, then chose Stroke, then chose the Color Picker. After clicking OK, the Blending Options dialog now sits behind the palettes. One trick is to click on another app, then back to cs6 to force a window redraw.
It sure would help me if this could be solved. I am preparing educational videos and this display bug makes things very troublesome.
Thanks for any help. If I find a solution, I will post to this thread so everyone can benefit.

The setting for the graphics check box Does Not make a difference. If I have a new document window open, then add a layer, then open the blending options > drop shadow > edit the color > the chooser dialog opens, and immediately both dialog windows drop behind the palettes AND any document windows.
The same behavior for the Preferences dialog > guides > color.
The quick workaround is to click another app, then back to CS6. A real pain, of course.
It is only a factor when opening a second (child) dialog box.
Other CS6 apps do work correctly (eg. FW AE)
I have yet to get a handle on this. Mac OSX 10.6.8 CS6 13.0 x64
Thanks for your replies, and the long reply time for me was a vaction away from the office.

I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
PLEASE HELP..
P.S :
I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

Hi Akshay,
If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
This is how you can specify a page break:
1. Select the image
2. Goto Object->Object Export Options
3. Select EPUB and HTML tab
4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
Regarding your question about images:
You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
Regards,
Pooja

No export dialog when edit in CS6

Similar Messages

Maybe you are looking for