No external no.assignment possible for material for material type HALB??

no external no.assignment possible for material for material type HALB??... message no:m3317
i got this error msg while i try to create external material via mm01
material: pump
industry type: mechanical engineering
material type: semi finished product
after pressing enter error came...

Hi
If you created number range already, then you need to remove the number range and recreate the same with external number range w/o check
Try it out.
Thanks
Raman

Similar Messages

  • Automatic number range assignment for creation of material issue

    Hi Experts,
    I need to create material with automatic assignment of internal and external number range .
    Already existing logic for one exit which is working fine in one system and I am using that same logic in other system
    where it is not working and  throuhging the following error:
    "Internal number assignment is not possible for the material type Operating supplies"
    Can you please suggest where i am dong wrong ?
    Thank you in advance.

    Hi,
    Please slect material type operating supplies  click on detaials. check  the external number assignment w/o check  checkbox
    Regards
    AKM

  • Is it possible to maintain two class type for a material

    Dear All,
    Is it possible to maintain two different class type for a material.
    If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
    For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
    How to handle this scenario.
    Please explain.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

    Mr.Raja
    As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
    We can assign many classes to  a single class type of  a material.
    For configurable material, create the material using material type : KMAT.
    & then, activate the 'batch management" control in the material master, for that material.
    Pls revert with feedback.
    Hope, that helps you.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • Two customer material number assignment for 1 Master material.

    Hi Experts,
    In customer material info records its a one on one mapping, ie for every master material there can be only one cutsomer material number.
    Is it possible to assign two different customer material numbers for one sap material.
    The requirement is for 1 material users wants to keep two customer material info records which can be used in diff scarios as per the requirement.

    Hi,
    Mapping is one to one between material and customer.
    >Is it possible to assign two different customer material numbers for one sap material.
    Yes possible, provided that's for 2 different customers.
    You can have 2 customer material numbers for same customer / same material.
    Same material can have more than 1 customer material numbers, for different customer.
    Best regards,
    Anupa

  • Assign Source of supply is not working for contract with material group

    Dear Experts,
    I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
    We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
    When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
    Can anybody help on this.
    Regards

    @ Biju,
    As mentioned earlier, we are not creating PR with reference to contract.
    first we are creating contract with item category W (material group), without material and plant details.
    we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
    Hope it is clear.
    @ Dev Patra,
    we are using DIEN-Service material types and we assign that particular material group to only service material type.
    we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
    Regards

  • Reformat external HD and possibly partition for use with mac and pc.

    Hi. I’d really appreciate some advice.  I’m a new Mac (MacBook Pro mid 2012) user.  I’m trying to figure out how to use a new external HD (WD My Passport) that just arrived today in connection with a digital tv media player (NBOX V3) that I use to watch videos on my tv, which is in the NTFS format. The tv box works with a flash drive that I have, which I had to reformat as FAT32.  Since I tend to max out the storage on the flash drive I ordered this new hd to use as well. 
    When I went to reformat the new hd I didn’t see the FAT32 option. There are 4 Mac options, MS-DOS (FAT), and ExFAT to choose from.  I read that ExFAT would work with both mac and pc (since I’m using OS 10.8.4 and my pc is Windows 7).  I was excited about it too since I know that FAT32 has a 4gb limitation.  I reformatted as ExFat first on my Mac and then on my pc.  I tried both b/c I read conflicting comments about it not working when reformatting on the mac, but that it would work when done on the pc.  Both times I tested the newly formatted hd on the tv box and both times it failed to recognize the files. After the failures I wondered if it was even possible for the external hd to work with the tv box, or if it had something to do with the ExFat format.  So, I reformatted it on my pc to NTFS and then plugged it into the tv box, which works just fine.
    I could really use some advice.  I wish the hd had the FAT32 option.  I’m wondering about partitioning.  I really don’t know too much about it, but am wondering if this might be the answer to make everything work.  I would need everything to work from my mac b/c the pc belongs to my husband (which I’m welcome to use), but all of the files that I load are from my computer (not to mention I’m already “used to” my mac and now seem to fumble around using a pc).  This might sound dumb, but I was thinking that if I made 2 partitions (one that would work with my mac and one that would work with the tv box, maybe the FAT option?) then I could load files on the mac friendly partition and then transfer them to the tv box friendly partition.  I’m thinking it won’t work so I wanted to find out first, plus I’ve never partitioned anything before.  I also know that on another external hard drive that we have for the pc I’m not able to modify the files on it from my mac, although I can see them and extract them.  I’m thinking if I partition this new hd I’ll have the same problem with the partition that is formatted as FAT.
    Partitioning might not even be an option.  If anyone knows a way to make what I want to do work, then I would really appreciate the advice.  Thanks in advance.

    Digital tv media player (NBOX V3) - NTFS, FAT32/MSDOS
    Mac - HFS+, exFAT (formatted on a PC best), FAT32/MSDOS
    Windows PC - NTFS, exFAT, FAT32/MSDOS
    Problem is if you use FAT32/MSDOS your capped at 4GB sized files and can't use larger storage drives. The other formats have no problem.
    The Mac can't write NTFS without further software being installed like Paragon NTFS
    I usually try to stick with neutral formats, but if your NBOX V3 doesn't accept exFAT then your stuck.
    Perhaps you should see if there is a firmware update for it that will enable exFAT, then format the drive exFAT on the PC and you should be set.

  • Account assignment check for non-direct material in shopping cart creation

    Hello Guru's
    i'm very new to SRM please help me
    We require all non-direct material shopping carts to be ordered with a valid account assignment. Therefore we implemented BADi ZUB2MB_DP_PROD_CHK to suppress the u201COrder as Direct Materialu201D Button. This button allows any order to be placed without account assignment like a direct material.
    We started ordering direct materials in SRM at go-live with a cost center, but when they were received, SAP considered them consumed due to the account assignment and did not place them into QA Inspection or assign a batch. We immediately, switched back to SAP for direct materials.
    We need a solution that will require all non direct material shopping carts to have account assignments, while allowing direct materials to be ordered with or without account assignments. All while keeping the current checks in place regarding the mixing of account assignments, Z required for TBI catalogs, etc.
    please tell me how to write the logic in the DOC_CHEK_BADI  to check weather account assignment is made for non-direct material while creating a shopping cart.
    thanks in advance....

    Account Assignment notification, should be take care by standard SRM functionality itself..
    Your using SRM 7.0 or 5.0 ??
    Thanks!!
    Bharath

  • Account Assignment Category in Rework Order for non valuated material

    Friends,
    We created non valuated material for rework. I want to accumulate the rework cost. When i am trying in CO02 = Header = Settlement Rule where the category is MAT but I want it to be ORD.
    How that category is changed to ORD, so that I can able to accumulate cost with respect to order?

    Hi,
    Whether you are creating the rework order with material? Actually rework order is supposed to be created without material with transaction CO07. Here in this case you have to define the account assignment category ORD in settlement rule.
    In some cases to meet the requirement we can create the rework order with material also through transaction CO01/CO08, but in this case the account assignment category will be MAT by default. Therefore you cannot change it to ORD.
    Hence you need to create rework order to have account assignment category ORD w/o material only.
    Regards,
    Sandeep

  • Is it possible to create a BOM  for ROH material for Subcontracting

    Dear Guru's
    As per my knowledge BOM is needed only for HALB & FERT material even if for subcontracting purpose. So is it possible to create a BOM for ROH material for Subcontracting?. Pls help me to get a soln ?
    Regards
    Ragesh

    Ragesh,
    When you are subcontracting the material, the Std SAP says that the material type should be HALB and not ROH.
    But if client requires for any reason that the material should be ROH only, there is no problem in chaning the settings.
    Sumeet

  • What are the possible cost objects for raw material consumption postings

    what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).

    For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
    Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number.  If you are using movement type 201, then the system prompts you to enter the cost center and so on.
    Thanks,
    Madhav Nanduri

  • Reg: Account assignment categary is mandadary for this material.

    HI All,
    i got the following error.
    Account assignment categary is mandadary for this material.
    Please give me the valid input on this.
    Thanks
    best Regards
    siva

    Check...
    1) value and qty updation tick for the relevant plant in the material type config.
    Logistics - General - Material Master ->> Basic Settings ->> Material Types ->> Define Attributes of Material Types ->> Select material type ->>  Click on Quantity/value updating.
    Check whether tick is set for the relevant plant. If not, set it.
    njoy SAP...
    njoy Lyf.,...
    Regards,
    Amit P hiran

  • Reqmnt class assignment to material for assembly processing?

    Dear All
    How can i assign a requirement class to material which enables assembly processing ??
    Thanks in advance

    If you go though this help link it will clear your understanding.  Also  chekc thread for the assembly processing, will get lots of information .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/95/1613ab837b11d2b6700000e82d8bd1/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/191e9e45fd11d188ff0000e8322f96/frameset.htm
    With Regards
    Nitin P.

  • Possibility of using Confirable material for consumption

    Hello All,
    Can any body tell me about the configurable material with class type 300 used as Bom component for different finished material for material consumption.

    Hi Rajasekar,
    Normally we have the top most material or the material which is to be sold as the one which has a class type 300 assigned to it. I think, if you need to assign this material as a component in another material, then even that material would have to be a configurable material.
    All said and done, if you are using this within another material you would still have to use dependencies for picking this material for consumption which would be based on the class char values that you get for this material when the production order for the parent material is created. You will need to pass values to these characteristics for this to happen and this normally happens through a sales order in such cases.
    If you could let us know of a business case or give us an example then maybe we could give some suggestions.
    Regards,
    Rajesh

  • Account assignment for Non valuated Material

    Dear All,
    Please guide how to create PR & PO for non valuated material.
    Regards,
    Manish Jain

    HI,
    Non-valuated material (Material Type UNBW):
    This type of material is managed on a quantity basis, but not on a value basis. This makes sense for materials of low value, stocks of which nevertheless have to be monitored (for example, operating manuals).
    Non-valuated goods receipt
    At the time of the goods receipt, postings to the consumption account do not take place. The posting to the GR/IR clearing account is therefore not applicable. With invoice receipt, the consumption account is debited with the invoice amount. The offsetting entry is posted to the vendor account.
    Regards,
    Pardeep Malik

  • Error message while creating configurable material for variant configuration.

    Dear All,
    I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
    Regards
    Akula Sivaji Kumar Madhu Kiran

    If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
    In MMNR, Click on the Edit Group.
    Then select the material type and click select element.
    Then mark a tick option in another group and then press Element/Group.
    Then you can see the material type will come under this group.
    Now save your entry, and create a material with this material type.

Maybe you are looking for

  • TS2755 My friend sends me photos from his iPad 2 via email. However, when he come to my iPad 2 inbox, the photos do not show up. Instead I get 20-some characters. What is wrong? Please advise.

    My friend sends me photos from his iPad 2 via email. However, when they arrive in my inbox on my iPad 2, the photos do not show up. I receive 20-some characters. Please advise as to the problem.

  • Case statement error

    Error:  The below case statement is throwing error when i include in the select statement for B    CASE WHEN (AST_INV_CHF_Y <= 250000)                   THEN 'BELOW 250K'                   WHEN (AST_INV_CHF_Y > 250000  AND AST_INV_CHF_Y <=1000000)   

  • Multiple Credit Limits

    Background I am implementing SAP SD where there are two main separate business in one company.  One customer can buy products from both business. Credit limits are defined separate for the same customer as the sales team of both business are differen

  • Could u pls  send these?

    I need a moderate example for interactive report with little bit complexity in logic could any body provide me any report or atleast link so that I can able to learn ,As Im very fresher to reports Im interested to knew about the reports development b

  • Creative Suite Farbeinstellungen

    Ich verwende einige Adobe Programme (Photoshop CS6, Premiere Pro CS5, Bridge,...) Dabei sin bei all diesen genannten Programmen die Farben unterschiedlich Wie kann man das Ganze synchronieren? Vielen Dank!