No External Speaker Option.

I've had my Bose speakers for 3 years now.  All of the sudden my iMac only has an internal speaker option. 
The Bose only work through the headphone jack now.  Thoughts?

well they do work with the audio out port (the "headphone" jack I spoke of). and that's how they've always worked (as it should.)
however the option now reads as:
(  PREFS/SOUND/OUTPUT:  HEADPHONES/HEADPHONES PORT)
Why doesn't it say EXTERNAL SPEAKERS like it used to, is my question.  + I think the speakers sound worse. Maybe they are just finally going bad.
Oh yeah and Final Cut ALSO only has internal speaker playback option. 
Tried the Audio MIDI before I decided to post this thread. 
All devices are BUILT IN devices. Shouldn't there be an external output?
Anyway, thanks!
l.

Similar Messages

  • Is there a way to connect an external speaker (for another room) through the headphone port

    Is there a way to connect an external speaker (for another room) through the headphone port  & still hear sound through the internal speakers?  System Preferences/Sound/Output or Sound Effects allows you to use one or the other  --  headphones or internal speakers.  I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time.  I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose.  (10.7.4  Lion)

    dont think so but I could be wrong
    as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers  but there
    are times when I use headset so I bought this one
    or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
    http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

  • My headphone port no longer connects to external speaker

    The external speaker works with my phone so I know the speaker works. The speaker doesn't work with the hdmi cable and was working right before I connected the cable. Now it doesn't work with iTunes or anything coming from the computer. Just my phone.

    Hi inthetrees,
    Happy New Year!  If you are not hearing sound from your headphone jack on your computer, I have a few things you can try.  First, disconnect the cable from the headphone jack and restart your computer.  This might reset everything.
    If that doesn't resolve the issue, take a look at the article below and confirm the sound output settings for your external speaker.  The article is for our most recent operating system, but the instructions for accessing the sound settings is the same.
    OS X Yosemite: Adjust your computer’s sound output settings
    http://support.apple.com/kb/PH18960
    You can play sound through your computer’s internal speakers, your display’s speakers (if it has speakers), or through speakers, headphones, or other equipment plugged into your Mac or available wirelessly through AirPlay. 
    Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output). 
    Choose a sound output device
    From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices. 
    For any device plugged into the computer’s sound port, choose Headphones.
    Adjust sound output settings
    You can adjust balance and volume for sound output with the controls in the preference pane. If you select the “Show volume in menu bar checkbox,” a volume control appears in the menu bar so that you can turn the volume up or down from anywhere. To set a separate volume for alert sounds, click the Sound Effects tab. 
    Depending on your Mac and the devices you use, you may be able to set other volume options using the Audio MIDI Setup app.
    If you use apps that have volume controls (for example, iTunes or iMovie), their settings can only be equal to or less than the computer’s output volume. They do not override the settings you choose in Sound preferences. 
    Adjust your computer’s sound input settings
    If you can’t hear sound from your speakers
    If a selected audio device reverts to another audio device
    I hope this information helps ....
    - Judy

  • External speaker won't work

    I have a BlackBerry Curve 8310 and the external speaker won't work. I don't get any notification of calls, texts, etc. I had a new external speaker put in but that didn't fix the problem. Anybody have any ideas of what else could be wrong? My phone is no longer under warranty, so AT&T will not replace my phone.

    The same thing happened to me. Go to Applications and then the Utilities Folder and then open the Audio Midi Setup app. Make sure the default output and system output are set to the built in output. The same symptoms happened to me when I ad reset those options to an aggregate device I created for some simple music production. Setting the above setting back to the defaults made everything better.
    -E

  • External Speaker not Working Properly

    Ok, i have this annoying problem with the external transducer...basically sometimes it works and sometimes it doesn't.
    This kinda disrupts all the allarm options as i can't rely on a device that "eventually" will work.
    This is the second iPod Touch i change and the problem is the same so i guess it is not an hardware fault but most likely software.
    Has anyone ever encountered a problem like this one?
    Message was edited by: OneOfTwo

    RRFS Northern Nevada
    Re: External speaker port not working 
    May 11, 2012 8:25 AM (in response to Tremolo Arm)
    A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
    PROBLEM SOLVED!!
    Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
    http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
    This is a very inexpensive solution and works great for me.  I'm listening to my Bose speakers now and they sound great!!  Thank you to all of you for your suggestions and help troubleshooting.

  • External speaker not working anymore

    I just got an iPhone 4 yesterday. The external speaker was fine until I hooked it up the earbuds. I removed the earbuds and now I cannot hear anything from the external speaker. I can't hear my phone ring. I can make a call, but can't use the speaker option. Can't hear music unless I put in the earbuds or hook it up to my home speaker.  I tried unplugging the speaker cables a few times like someone said in another forum. That worked for a little while, but then the sound went away again. I tried rebooting.  Help.

    I know this might sound stupid but, you do have the ringer volume turned up don't you. The only reason I ask is, I did exactly the same thing this morning, took me 15 mins before I realised what I had done.

  • Locking the volume on external speaker

    My grandson is autistic and always has his ipad.  He has it in airports, on airplances, in stores, etc.  I know you can lock the volume on the ipad but that is only if you are using ear buds or headphones which he does not use.   Does anyone know if you can lock the external speaker volume so it's not so loud and disturbing to other people?  If not Apple this is something you need to address.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • TA24826 After plugging in an external speaker, now no sound at all anywhere

    I plugged in an external speaker and it never worked. When I went back to using the internal speakers, they stopped workig. What to do?

    Could be the Jack inards never closed, insert it afain & jiggle a bit.
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Where has the speaker option gone?

    I'm currently on itunes v.9. The speakers option, where I could have music playing from either the speakers on my laptop or from my external speakers via the airport, has completely disappeared, and now I cannot use itunes to play music at all.
    How do I get the speaker option back? (It was in the bottom right hand corner of the menu bar.)
    Thanks in advance for any advice on this!

    I have restarted it - several times! It is most frustrating though. At least I have an ipod, so I don't have to sit in silence. Thanks for your thoughts, anyway.

  • Since I used an external speaker, on monday for my MacBookPro, my speaker on the laptop has been disabled.

    Since I used an external speaker, on monday for my MacBookPro, my speaker on the laptop has been disabled. The speaker icon on the top tool bar is grey and can not be accessed.

    Hello there, chriswetherby.
    The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Check your Sound System Preferences pane
    If you are still having issues after you have confirmed the proper version of Mac OS X is installed, make sure the computer is set to play sound from the right source.
    Remove any external audio devices and cables from the USB, FireWire, or 3.5 mm audio ports.
    Open System Preferences from the Apple () menu, the Dock, or from the Applications folder on your hard drive.
    Open the Sound pane and the Output tab, then select Internal Speakers as in this image:
    If Internal Speakers is not an option proceed to step 4. For Mac Pro computers, proceed to step 5.
    If Internal Speakers is present but not selected, select it and test again.
    If the Output volume slider is low or the Mute box is selected, raise the volume slider or deselect the Mute box and test again.
    If the issue continues through these steps and Internal Speakers remains the selected option proceed to step 5.
    If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
    Confirm again that all external audio devices and cables have been removed.
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    If you do not see a red light, proceed to step 5.
    If the issues persist, contact Apple support for further troubleshooting assistance.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My ipod 4g external speaker has been working on and off for the past few days since christmas. 2 days ago it was working all morning then in the afternoon in the middle of watching a video it just stopped. it hasnt worked since ): any help?

    My ipod touch was given to me from apple refurbished and still with ios 5.0.2 after owering it on for the first time and updating to 6.0.1 it was functioning normally and i was using it just fine. i had just begun to use itunes and i bought some music and after playing about 3 or 4 songs aloud from the external speaker it stopped working. just like that. i looked over the internet about other incidents like that but then after thaty i returned back to my ipod and began playing Tron and the sound worked fine! i exited the app and it played my music just fine too. then the next day it went out again and no sound was being played. i left it alone and after about 2 or 3 hours i came  back to it and it played sound again. the next day it went out in the middle of watching a video i had just taken. it hasnt come back on since. any help/suggestions?? anything plz..

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself

  • I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

    I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

    I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
    I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
    http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
    http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

  • How do i turn off the external speaker on my brand new iPod touch

    how do i turn off the external speaker on my brand new iPod touch - it is very annoying

    Just turn the volume fully down using the lower button on the upper left side of the iPod.
    You can also go to Settings>Sounds to turn off alert and ringer sounds.

  • MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy

     MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP

    Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How do I hook up external speaker to macbook pro

    How do I hook up external speaker to macbook pro?

    The external speaker needs to be active - have it's own power source and amplifier - then you can just hook it up with an appropriate cable from the headphone output socket of the Mac.  If you want to go wireless, you would need to get an Airport Express - probably overkill - or get a bluetooth dongle that could be hooked to the speakers input.
    If the external speaker is passive, you would need to attach it to a HiFi and hook the Mac up to the input of the HiFi.

Maybe you are looking for

  • Mysql driver and Jbuilder 2005 foundation

    I am trying to connect to a mysql server using jdbc and the mysql drivers. Specifically version 3.1.7. I will post my code here although I believe the code is correct and that I have a classpath issue with jbuilder. The error I am receiving on both b

  • Can't connect to Oracle XE instance from Java web application

    I'm a long-time Java developer but can't figure this out. I've been pouring over the forum for over a week and can't find the solution that will let me connect. Hardware: Intel/Vista. DB: Oracle Express 10G. Application: Java web application (Jakarta

  • Can Airport Extreme log all websites?

    I am a parent looking to monitor Internet usage for my family.  Ideally I would like the ability to log all URL's visited through the router and track problem sites to a specific device, date, and time.  I've read that some routers allow for this.  I

  • Idoc settings for Backend Contract creation in SRM 5.0

    Hello, Im working on SRM 5.0 (HP 11) and want to create a Backend contract in R/3 (46C) directly. I do not need Local Contracts or GOAs en SRM! As I interprete the config guide for Sourcing (page 59 and 70-75, the scenario I need uses the BADIs: BBP_

  • Facing problem while adding combobox using gridbaglayout

    HI, I have used gridbaglayout in my panel. after adding the gridbaglayout, if i select long value combobox does't display all the value of the selected value. Why? This is my code cboPrioritySearchValue = new JComboBox(); cboPrioritySearchValue.setBa