NO external storage available error

I am using blackberry z10 and i have a 2gb memory card in it.when i open hike and try to change my profile picture it shoes no external storage available.Same happens iin truecaller.

2 GB?
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

Similar Messages

I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: go to Settings - iCloud - Storage and backup - turn off the iCloud backup
and backup with iTunes from now on
More info on backing up: http://support.apple.com/kb/ht1766
Or, if you prefer to keep backing up with iCloud, check out this article, it will help you understand how to manage the iCloud storage:
http://support.apple.com/kb/ht4847

Device not ejected properly error message on all external storage devices: SD, Ext HD, iPod, IPhone, etc.

All external storage devices (USB HD, iPod, iPhone, SD card reader, etc) are not staying connected. Connection runs for 10-15 sec and the error message "card not ejected properly" appears. Have reformatted cards, performed a OSx install disk permissions and disk repair, re-installed and updated OSx, and PRAM reset. After the OSx reinstall I had no problems for about 2 days then my iPod shuffle sync triggered the error message. I follow good practice in ejecting disks from the Finder window or iTunes.

thought i had it licked after taking to the local service center. they checked out the hardware and felt there was no problem getting power to the USB and SD ports, eg the suspected cause of the eject. they thought it might be a buried permissions problem in some dl'ed software that the repair utility would not find/fix. sooo...i wiped the disk and reinstalled everything from scratch. worked for about a month and now its showing up again. just kicked off my shuffle. the sd reader self ejects after about 10 seconds. dunno where to go from here.

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

There shouldn't be any fee involved. Call the Apple online store for your country (1-800-MY-APPLE in the U.S. and Canada) and request a refund.
If the download is stuck, you can download in iTunes on your computer, then sync it to your iPad once your free up some space. This explains how to download your previous purchases to your computer: http://support.apple.com/kb/ht2519.

Error -2500 Internal storage VI error

Hello,
I am trying to continuously stream data from seven channels from my NI USB-6211 DAQ card. At the same time I am generating a continuous sine wave and write it to one of my analogue outputs on the same card.
I’d like to stream the data generated and measured continuously and simultaneously to a file. I have chosen TDMS as this seems to be most appropriate for the application.
The problem I am having is that available samples per channel gives me back 0 when I am not in highlight execution. I tried to overcome this by setting the samples to read input at the DAQmx Read VI to -1 and have a wait function to not read too often but this didn’t help. Furthermore, I installed TDMS 2.0 without any success. The error I am getting is -2500 and it says "Internal storage VI error". Does anyone have an idea what I am doing wrong?
Also, it would help quite a lot if I could have a time axis for the analogue output and one for the analogue input group so I can look at the time delays introduced by my circuit. Does anybody know how to do this, so I have a time stamp for each sample like in the express VI? Or any other way to find the relationship between the data of the two groups when sampling is carried out at different rates?
Thank you very much for your help,
Sophie
Attachments:
sync data.JPG ‏135 KB

Ok, so I wasn't sure what you ment exactly. I have tried to do the same with just the TDMS VIs. It seems to be working fine. I don't get any errors and the TDMS file seems complete too.
I had the feeling DAQmx Read (just the one in the upper loop) gives the error as it doesn't seem to detect any samples to read. Which would also explain why I don't get the error in highlight execution, because then there are samples to read. This is why I added the wait VI in the loop and made it 3s hoping this will allow some samples to be collected in the buffer but there just don't seem to be any samples.
I have attached an image of the TDMS VI I just tried out, I can add more things if you have any ideas...
Attachments:
tdms.JPG ‏58 KB

Apple TV - sync with external storage?

I bought an Apple TV about 2 weeks and have been pretty happy with it. I have lots of TV shows saved on an external drive so as not to completely fill up my iMac. The external drive is connected to my iMac at all times.
Is there a way that I can sync Apple TV to this external storage device? Or watch TV shows from the external hard drive without moving them back to the iMac and then syncing with the Apple TV? Or is there a way I can leave TV shows on the Apple TV without also copying them to my iMac? My Apple TV is 160gb so there must be a way of using that memory without jamming up my iMac.
I've looked in the manual but haven't found an answer to this situation.
Thanks for any ideas or assistance.
Elizabeth

Emsullivan wrote:
I bought an Apple TV about 2 weeks and have been pretty happy with it. I have lots of TV shows saved on an external drive so as not to completely fill up my iMac. The external drive is connected to my iMac at all times.
Next thing to appreciate is how iTunes stores files.
The iTunes library, usually called iTunes, contains various sub-folders and files.
Some of these files contain the library database, artwork etc.
There'll be an iTunes Music folder which contains the media copied into iTunes on import.
There may be old library database backups, and a folder for iPhone apps if you have one.
There may be other folders for other sorts of user.
Is there a way that I can sync Apple TV to this external storage device?
Not without the files being known to iTunes - all communication with AppleTV in terms of local network file transfers works through iTunes.
Or watch TV shows from the external hard drive without moving them back to the iMac and then syncing with the Apple TV?
Yes, this is possible.
When you import a CD it will automatically store in the iTunes Music folder. You can see where file are by selecting Show in Finder after a right click on the entry in iTunes.
If you import a file from somewhere other than CD however there is a Preference under Advanced>General Tab which decides if a copy is placed in the iTunes Music folder or not. If you deselect the copy option iTunes simply stores a reference to the file not the file itself.
So, if you deselect copy you could just drag the files from the external drive onto an iTunes window and they'll be available for syncing/streaming but still live on the external drive.
This is probably your simplest option. There is a keyboard shortcut which from memory is the option key which will temporarily not copy an added file when dragged to iTunes.
Or is there a way I can leave TV shows on the Apple TV without also copying them to my iMac?
Using the do not copy option in iTunes will achieve this with files on the external drive not on the iMac.
There is no manual drag and drop type way of filling AppleTV with media which is a shame if you don't have the external drive.
You can in fact delete the file in the itunes Music folder manually from Finder and this will not remove them from the database - iTunes will complain if you try to play them or stream them but if synced to AppleTv you can play them from there. I do not recommend this approach, and you must not delete the file entry from iTunes or it will then also delete from AppleTV.
My Apple TV is 160gb so there must be a way of using that memory without jamming up my iMac.
The 160GB is mainly indtended to allow you to have more stuff on AppleTV so that youd odn't need itunes running all the time, or perhaps ifyour network doesn't allow smooth steaming.
It is not a backup and must not be regarded as external storage - many people assume it's storage and then lose their files when their computer's hard drive or external fails if they have no backup. Sorry to repeat this but it's important.
I've looked in the manual but haven't found an answer to this situation.
It's not particularly detailed is it.
Hope that helps.
There are some other options to consider too.
AC

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

Copying to TC drive results in "network name is no longer available" error

Hi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
Ramon

Hi --
We have a Western Digital MyBook hooked up to Time Capsule and are using it as shared storage. I can view the drive and copy down files with no problem. However, I am now having trouble copying large files (e.g. videos) to that connected drive. Small files are not a problem, but anything over a few hundred MB produces a "network name is no longer available" error on XP.
Note that copying files FROM the TC-connected drive to a local drive is no problem, even for large ones -- a 600MB file takes about 2 minutes over wireless. But if I try to copy that same file BACK to the TC drive, I get the error.
One strange thing I noticed is that when copying FROM the TC-connected drive, right away I get the usual dialog box showing copying progress. But when copying TO the TC-connected drive, the dialog only shows up after about 30 seconds. And the actual progress bar never moves -- it just spins for about 30 more seconds and then shows e.g. "Cannot copy Wonderboys: The specified network name is no longer available"
Any suggestions on how to debug this further?
Ramon

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
That gets a little more expensive but it is the optimum solution.

Stackable external storage?

I need to add some external storage to my mini and I'm looking at an Iomega MiniMax 500 GB USB 2.0/FireWire 400 Desktop External Hard Drive 33746. Has anybody had any experience with this one or other brands/models? The space on my desk is tight so it has to be one that my mini can piggy back on. I just want a quality/reliable drive. Any input is much appreciated... : )

Thanks so much for the input tm311. These look like a better drive than the iomegas. I see they are also available already equipped with hard drives. Can you tell me if these are quality drives? What would be the advantage of installing your own drive?

External storage for early 08 mac pro for video storage and editing

Early 08 Mac Pro mod 3.1, 2x Intel 2.8 Quad Core Processors. Bus speed 1.6 Ghz. 10 GB DDR2 FB-Dimm 800 MHz. USB2, Firewire 400, 800. ATI Radeon HD 2600 PCIe 256 mbVRAM. Currently running OS 10.6.8.
I use machine for photo and video storage and editing. I tried using 2x 3TB and 2x1TB HDD internally ( 8 TB total). All are Seagate Barracuda SATA 7200. Experienced constant spinning wheel and lockup requiring manual shutdown. I had upgraded to Lion and to Maverick. Did not help so I did a clean install of primary with Snow Leopard and did not install past 10.6.8. Works now if I don’t exceed 3.5 TB internally. I also discovered that my Disk Permissions experienced voluminous corruption that could not be repaired if I installed Java for Mac OS 10.6 Update 17 as suggested each time I check for software updates.
I need to be able to have a total of about six TBs available in my system for storage and editing of video via Imovie. I don’t know the maximum of HDD storage that can be used in the four internal bays without causing lockup and corruption. If 3.5 TB is about the max, then I would like to have some ability to have external storage via firewire 800 if that would facility fast enough transfer for either video edition and or playback. I don’t know if thunderbolt can be installed via PCI card. I could add a SATA PCI card. However, I assume that would cause the same problem as experienced with 8 TBs installed internally in the four bays.
I would appreciate any suggestions.

olderguy1 wrote:
Do you mean 2x2TB and 2x3TB for a total internal capacity of 10TBs? Are you running Snow Leopard or something else? Actually, I took it to an authorized repair facility who ran checks and said nothing is wrong with the hardware.
Yes, I've got a total of to TB and I'm running Snow Leopard. If your hardware checks out, that pretty much makes it a software problem,,, reinstall the OS?
Does the High Point Technologies SATA3 PCIe connect to eternal drive enclosures or does it somehow connect to drives in some of your four internal bays?
Highpoint makes several RocketRAID 2700 series SATA3 controllers for Mac with external mini-SAS connectors, probably the cleanest/least expensive external hook-up. They also offer a combo internal/external board that (for marketing reasons) is listed as not working for internals with Mac Pro. I believe that this is due to pressure from Apple (who apparently does some business with High Point Tech) but to the best of my knowledge it will. Technically, the "not supported" statement is true since all the internal bays are tied to the motherboard SATA 2 controller, but this can be remedied with a special cable. HOWEVER... the boards are not bootable, so your system disk needs to be on the motherboard controller.
In truth, I bought one of their 8-port "internal only" boards designated for PC only and flashed it so the Mac Pro sees it as a 2722 board, so I have 8 internal ports. I'm not recommending you do the same unless you're pretty geeky, but the 2721 would give you half-and-half or the 2722 would give you 8 external with no mods to the board.

Kernel panic when using FAT formatted external storage

I have a PowerBook G4 17" with 1GB RAM and since updating to 10.4.8 from 10.4.7 I have received on three occasions a kernel panic, i.e. a message that says "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button."
Looking at the conditions under which this event occured, on all three occasions, this looks to be disk I/O related using external drives however the cause could be something else like Spotlight indexing for example - I am hoping this is not hardware.
On the occasions where the problem has occured the attached storage devices have been:
1. A FAT formatted, bus powered Firewire attached 2.5" IDE drive
2. A FAT formatted PC Card drive
I had this happen to me last night with the PC card drive when I found I couldn’t delete any data from the drive but could write and overwrite data. My internal IDE drive seems to be fine however I decided to eject the drive and reinsert it but on reinsertion the system could not see or mount it. I then tried a FAT formatted CF card with PC Card reader/adapter – same thing, it wouldn’t mount. I then decided it was time to reboot and that is when the message popped up as the transparent grey bitmap (http://docs.info.apple.com/article.html?artnum=106227). After rebooting I got a kernel error stack trace telling me something bad happened hence the reboot. This thread seems to be very similar to my problem except with a new Intel version of the 17":
http://forums.macnn.com/90/mac-os-x/312947/what-does-mean-when/
Any ideas? In all cases this has occured when using an external FAT formatted drive and actively writing data to it - it doesn't seem to matter how it is attached or specifically which drive it is. I have not had this problem previously when using external storage media and I am not using any backup software when this occurs - I am simply saving files from various applications be it PhotoShop or a Safari download. One last note, I am using Intego VirusBarrier X4.
Right now my plan will be to run the disk utility, disable anti-virus and possibly disable indexing on external drives and try to reproduce the issue - the only problem with this is with the exception of the 10.4.8 update, what changed?
PowerBook G4 17" 1.33Ghz Mac OS X (10.4.8) 1GB RAM

Funnily enough I can backup to my USB attached bus powered 2.5" drive formatted as Mac OS Extended, this is why I am wondering if there is a relationship between externally attached FAT formatted storage and kernel panics.
My system disk checks out with no errors BTW - I also rarely travel with my PowerBook so it is relatively well looked after and should have a lower exposure to issues relating to faulty hardware.

DB2 / Red Hat 5 : Backup to External Storage Failed

Dear gurus,
I've SAP ECC 6 running on DB2 9.7 FP2, RHEL 5.0
We can backup to internal disk, but when configuring backup to external storage (Maxtor Shared Storage II), there's this error.
I mount the external storage using cifs, with correct owner and permission (db2<sid> : db<sid>adm with 777 permission.)
The shared storage is: //192.168.1.8/mhp with mount point /mnt/mhp
When I backup using DB13 to /mnt/mhp, the file is created and the size continually grows constantly.
But when the backup is about to finish, the file then disappears, and DB13 returns "Database backup failed"
I see the db2diag.log, and here's the entry:
[db2diag.log|http://snipt.org/pYx/]
The message is not too clear for me.
Does anyone happen to come across the same problem as me?
Thanks for your help.
Best Regards,

Dear gurus,
If it is plain file like copy / move command to the storage, it can be done successfully.
I can also 'touch filename1' there. But for DB13 or DB2 backup command, it failed.
Markus, there's no particular technical things. We just choose cifs.
I've tried NFS but it said things like "Connection Refused" when I tried to mount -a.
I've tried also in different server, and it actually give the same result. So I think it's not SAMBA.
May I know what you mean by mapping the user?
I can make shared folder in the maxtore webgui management, and create user to own that folder.
Thanks for your help.
Best Regards,

ASM not mounting after reboot of external storage

I have a setup with 4 internal drives and 12 external drives(external storage, multipath). The diskgroup was orignally created on the 4 internal drives and then the disk group altered to add the external storage. Everything was fine until the external storage array got powered down. Then we rebooted both boxes and ASM did not come up. I also see the HEADER_STATUS as UNKNOWN for all the external storage drives.
Tue Oct 14 11:49:34 2008
SQL> ALTER DISKGROUP ALL MOUNT
Tue Oct 14 11:49:34 2008
NOTE: cache registered group DATA number=1 incarn=0xf4a85ef9
Tue Oct 14 11:49:34 2008
Loaded ASM Library - Generic Linux, version 2.0.3 (KABI_V2) library for asmlib interface
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
NOTE: Hbeat: instance first (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: start heartbeating (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: PST update: grp = 1, dsk = 4, mode = 0x4
NOTE: PST update: grp = 1, dsk = 5, mode = 0x4
NOTE: PST update: grp = 1, dsk = 6, mode = 0x4
NOTE: PST update: grp = 1, dsk = 7, mode = 0x4
NOTE: PST update: grp = 1, dsk = 8, mode = 0x4
NOTE: PST update: grp = 1, dsk = 9, mode = 0x4
NOTE: PST update: grp = 1, dsk = 10, mode = 0x4
NOTE: PST update: grp = 1, dsk = 11, mode = 0x4
NOTE: PST update: grp = 1, dsk = 12, mode = 0x4
NOTE: PST update: grp = 1, dsk = 13, mode = 0x4
NOTE: PST update: grp = 1, dsk = 14, mode = 0x4
NOTE: PST update: grp = 1, dsk = 15, mode = 0x4
Tue Oct 14 11:49:39 2008
ERROR: too many offline disks in PST (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: cache dismounting group 1/0xF4A85EF9 (DATA)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DATA was not mounted
Tue Oct 14 11:49:39 2008
WARNING: PST-initiated MANDATORY DISMOUNT of group DATA not performed - group not mounted
Tue Oct 14 11:49:39 2008
Errors in file /home/oracle/admin/+ASM/bdump/+asm_b000_6358.trc:
ORA-15001: diskgroup "DATA" does not exist or is not mounted
Tue Oct 14 12:31:17 2008
Shutting down instance: further logons disabledPATH NAME HEADER_STATUS MOUNT_STATUS MODE_STATUS STATE GROUP_NUMBER DISK_NUMBER FREE_MB READ_ERRS WRITE_ERRS
ORCL:DISK1 MEMBER CLOSED ONLINE NORMAL 0 0 0
ORCL:DISK9 UNKNOWN CLOSED ONLINE NORMAL 0 15 0
ORCL:DISK11 UNKNOWN CLOSED ONLINE NORMAL 0 2 0
ORCL:DISK12 UNKNOWN CLOSED ONLINE NORMAL 0 3 0
ORCL:DISK13 UNKNOWN CLOSED ONLINE NORMAL 0 4 0
ORCL:DISK14 UNKNOWN CLOSED ONLINE NORMAL 0 5 0
ORCL:DISK15 UNKNOWN CLOSED ONLINE NORMAL 0 6 0
ORCL:DISK16 UNKNOWN CLOSED ONLINE NORMAL 0 7 0
ORCL:DISK2 MEMBER CLOSED ONLINE NORMAL 0 8 0
ORCL:DISK3 MEMBER CLOSED ONLINE NORMAL 0 9 0
ORCL:DISK4 MEMBER CLOSED ONLINE NORMAL 0 10 0
ORCL:DISK5 UNKNOWN CLOSED ONLINE NORMAL 0 11 0
ORCL:DISK6 UNKNOWN CLOSED ONLINE NORMAL 0 12 0
ORCL:DISK7 UNKNOWN CLOSED ONLINE NORMAL 0 13 0
ORCL:DISK8 UNKNOWN CLOSED ONLINE NORMAL 0 14 0
ORCL:DISK10 UNKNOWN CLOSED ONLINE NORMAL 0 1 0
16 rows selected.

Hi,
Verify if oracle software has read write privileges on raw devices, cause some Operating Systems changes owner to root after reboot the servers.
regards,
Rodrigo Mufalani

Where Can I download the BIOS for the laptop DV6-2101ax BIOS using an external storage device?

Have you tried the BIOS file on your Support page with no luck? http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-2100-Entertainment-Notebook-PC-series/4041735/model/4093933#Z7_3054ICK0KGTE30AQO5O3KA30R1

I use a HP laptop model DV6-2101ax.
I'm getting a BIOS corruption error on startup.
So I found a solution "Recovering the notebook BIOS using an external storage device" in web page of "Restoring the BIOS".
But I can not find and download the BIOS for DV6-2101ax like describing the solution web page.
Where Can I find and download it?

NO external storage available error

Similar Messages

Maybe you are looking for