No faces shown under "faces"

Hello!
I'm using iPhoto 9.3.2 under OS 10.7.4 and ecperience the following problem:
When I click on "faces" on the left side iPhoto used to show me little polaroid-like pictures of faces of people I marked in my pictures.
No (I unfortunately don't recall after which update that happended) I just get the polaroid-like frames with a black inside.
When I pick one and select "photos" instead of "faces" iPhoto shows me all the pictures I tagged. But if I want to see just the pictures I have the same effevt as in the overwie - all black.
Can anybody gelp me with that?
Thanks!

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions, if needed rebuild thumbnails and and if necessary rebuild your database
LN

Similar Messages

Sand box Non-central adapter engine entry is shown under development rwb

Hi All,
Recently we had a sand box which is a sytem copy of our development server, and everything works fine now.
I have observed a strange issue here is, in the developement rwb under the Non-Central Adapter engines I see a entry as "Adapter Engine T49 (sand box host name)" the SID seen here is a sand box SID, and till today we never installed any non-central adapter engine either on dev or sand box, I am suprised to see this entry, can some one
please help me to understand why is this sand box entry is shown under development rwb and where can I set this or where how can I delete this entry.
Surprisingly I do not see the same non central adapter engine entry on sand box rwb.
All the servers are XI 3.0 (SP 19).
Thanking you in advance..
Regards
Sonali
Edited by: Sonali R on Sep 14, 2009 10:59 AM

Hi Sonali,
The adapter and integration server engines gets registered with the data in SLD. Please check SLD associations for all XI classes.
Best Regards
Raghu

Non-central adapter engine entry is shown under development rwb

Hi All,
Recently we had a sand box which is a sytem copy of our development server, and everything works fine now.
I have observed a strange issue here is, in the developement rwb under the Non-Central Adapter engines I see a entry as "Adapter Engine T49 (sand box host name)" the SID seen here is a sand box SID, and till today we never installed any non-central adapter engine either on dev or sand box, I am suprised to see this entry, can some one
please help me to understand why is this sand box entry is shown under development rwb and where can I set this or where how can I delete this entry.
Thanking you in advance..
Regards
Sonali

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

HT4483 All my purchased app are not shown under "Purchase" in Mac App Store

Hi,
All my purchased app's are not shown under "Purchase" in the Mac App Store window. I have changed computer and need to re-install some of my purchased apps on my new computer but cannot find them. Please advice

Two things may be behind this. I see you have changed your computer. Did that entail you changing your ID? And there is also the possibility they have become hidden.
Mac App Store: Finding your purchased apps
iTunes Store: Hiding and unhiding purchases

What is shared photo stream data shown under in iTunes?

Is data from shared photo streams on my iPhone shown under the "Photos" or the "Other" category in iTunes? I'm trying to figure out why my "other" category has gotten huge. I know that this may be any number of acutal issues, and that there are forums for those, but I have recently added some large shared photo streams and am wondering if that could be it. I have been unable to find the answer to this question already on the forum.
Anyone know?

According to Apple's documentation, there's no limit (I still find that hard to accept, but they have said so). You mention using is as a backup - NEVER rely on icloud for backing up photos, ALWAYS sync then to a computer for safekeeping and storage, as you would save photos from a camera. Too many users have lost photos performing restores from an icloud backup.
Apple's docs indicate that shared photo streams do not count towards your icloud storage limit (also hard to believe, but there you go). Friends cannot add photos to your stream, they can only make comments.
icloud stores the photos and downloads them individually when you tap on a thumbnail pic. Note that you have no control over the sorted appearance of the photos.
http://www.tuaw.com/2012/09/20/ios-6-shared-photo-streams/
http://www.apple.com/ios/whats-new/#photostream

I WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?

I
WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?i

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
But please not all-caps.

I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

See if this helps:
https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html

I upgraded and now when I plug in my iphone4 to sync it isn't shown under devices...is there a reason why?

I upgraded and now when I plug in my iphone4 to sync it isn't shown under devices...is there a reason why?

I did all that and reinstalled itunes! It does recognize my device now but it won't back up...says that it can't be saved to this computer!? I did all the troubleshooting and I am stuck:(

Books on iPad not shown under iPad tab in iTunes

For some reason existing ebooks on my iPad mini are not visible under the "Books" sidebar entry inside iTunes, under the "On This iPad" tab. I can add books to iBooks on the iPad by dragging them to the iPad icon inside iTunes, and the books transfer OK; they simply are not shown in the list in iTunes. I have another iPad which works fine, i.e. books on the iPad shows up in the list; same with an iPhone which works correctly. Alldevices have synch switched off so I manually add books (and music; music list works fine on all of them so it is only books having the problem).
This is frustrating since it means I cannot remove books from the iPad using iTunes. Deleting all the books on the iPad (by doing it inside the iBooks app on it), deleting the iBooks app itself, rebooting, and then re-adding books does not help. Also, the iPad in questio was recently reset using an iCloud backup which did not change the situation.
So any ideas why my iTunes insists there are no books on this particular iPad, even though iTunes happily transfers them?

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Rem: Market Reference Salary not shown under Compensation Information

Hi,
The Market reference salary under Enterprise Data under Compensation Information in MSS has always been shown as 0, even though we have given values for the particular user with the details like MOLGA, SLTYP, SLREG, SLGRP and have updated MKREF and CTAMT under T710a and SLREF field under T710.
Still the null value persists. I want to know where this particular value is picked from. Can anyone please help on this issue?
Thanks and Regards,
Tanuj

Thanks Siddharth Rajora
Dont you think that this node is for the configuration for Salary development rather then salary data ?
I have made changes in it with the name BASE and I am seeing the impact in salary development but in salary data nothing is being shown
secondly i am using the wage type by the name of1sal for annual salary and have made minimum and maximum for it shouldi maintain the min and maxi for all the wage types of IT 0008?

Market Reference Salary not shown under Compensation Information

Hi,
The Market reference salary under Enterprise Data under Compensation Information in MSS has always been shown as 0, even though we have given values for the particular user with the details like MOLGA, SLTYP, SLREG, SLGRP and have updated MKREF and CTAMT under T710a and SLREF field under T710.
Still the null value persists. I want to know where this particular value is picked from. Can anyone please help on this issue?
Thanks and Regards,
Tanuj
Edited by: Naga Tanuj on Oct 10, 2008 5:01 PM

Thanks Siddharth Rajora
Dont you think that this node is for the configuration for Salary development rather then salary data ?
I have made changes in it with the name BASE and I am seeing the impact in salary development but in salary data nothing is being shown
secondly i am using the wage type by the name of1sal for annual salary and have made minimum and maximum for it shouldi maintain the min and maxi for all the wage types of IT 0008?

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

"Package Upload" not shown under Content Management

Hi ,
I want to upload the ice package of PDK, I am following the steps from its installation guide.
<b>But I cannot see the "Upload Package" under Content Managment->Content Exchange</b>.
I have also assigned the required roles to the user(JavaDeveloper, super_admin_role,ContentManager,navigationconnectortestrole).
Any idea?
Regards,

Earlier i was trying to access server using IP address, but when i try to access it using host name the problem has gone. I guess, its effect of some domainb policies(Not sure).
Regards

Why Are Shipping Charges Not Shown Under SHIPPING on Pacing Slip

Why are the shipping charges included in total amount charged, but not under shipping on the Packing Slip?

Why are the shipping charges included in total amount charged, but not under shipping on the Packing Slip?

Disk Utility Help! There is no Mac HDD shown under my Hard drive. Repair disk is grayed out.

I can't repair my Mac HDD in Disk Utility. Nothing is popping up under my Hard Drive. Please Help!

Yes, it matters. You need to repair the hard drive with the Install disc of the version of the operating system which is installed on the hard drive.
Try starting up in Safe Mode as an alternative to using the OS Install DVD in order to repair the hard drive.
Once started up in Safe Mode, you can click on the Apple logo in the upper left of the display and choose "About This Mac" to find out important information about the MacBook. What information is listed there?
After starting up in Safe Mode, try starting up normally and then go to Applications > Utilities > Disk Utility and repair permissions on the named boot volume.
I suppose you are having problems, or you would not be needing to repair the hard drive? You may want to let us know what problems you are experiencing.
Please include the exact model of the MacBook. You can choose from this list:
http://www.everymac.com/systems/apple/macbook/index-macbook.html
Also, which version of the OS is installed, how much RAM is installed, and what it the hard drive capacity and how much space remains available on it?

No faces shown under "faces"

Similar Messages

Maybe you are looking for