No FB status updates in contacts

I upgraded to ICS few days back and I'm liking it. But there is this problem that even after syncing my facebook account, I dont get the option of showing status updates in contacts. That option is grayed out. Any solution?
Also, some of my contacts are not fully syncing with facebook. Contact picture is not being displayed for some.

settings > app > all >facebook > clear data
Turn on wifi
Go to settings > account and sync > turn it on
Add account > add facebook (Add facebook and use it for a minute) and facebook inside Xperia as well
wait for atleast 5 minutes and let the contacts sync
Now go to contacts > settings > select show status updates > all
Now-
you have to sync atleast for 4-5 minutes,, both "facebook" and "facebook inside xperia"
even make sure you log in into facebook and even select "sync" option that it shows at startup and use facebook for one minute
Then go to contacts
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

E7 - No status updated in contact book with Social...

Hi,
I have noticed a new functionality in the Beta of Social 1.3 where status updates are shown in the contact book respectively. This worked once and stopped ever since. I installed the most current release from the Ovi store (post-beta as of June), but I can't get status updates to the contacts in my contact book. I have mapped the contacts in Social 1.3, as appearently indicated by the icon that looks like a contact book with a little chain piece. But no success yet. Is there a trick to get this to work?
Hints are appreciated
Robert

If your contacts were synced to your Mac, then yes they will have been written to it's hard drive at some point. Whether data recovery software can recover your contacts or not is another question and one that can't be answered because there is no guarantees with data recovery as to what can be recovered.

BBM 5 status update failed when over 100 contacts

I have found BBM 5.0.0.33 and BBM 5.0.0.55 will not update your status if you have over than 100 contacts.
This has been tested a verified by many blackberry messenger users, with different phones, and different versions of the OS.
There is no solution and almost everything has been tried, from re-installing the OS, to re-adding contacts individually etc..
The only thing to do is to delete your contacts so as the total is below or equal to 100.
I am shocked and surprised that RIM has not acknowledged this problem, nor have they fixed this in the 0.55 release.
It seems to be a trivial problem, with a magic number of 100 contacts.
If RIM is trying to prevent the servers from overloading with status update info, at least increase the limit to 200 contacts, as most people will have less than 200 contacts, but a lot have over 100.
The magic number should be 200

Are you still seeing this issue with the new .57 version of BBM?
If you do not have the new version you can get it using your BlackBerry browser www.blackberry.com/messenger
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Status updates

How would i be able to delete my status updates on skype so that my parents wont see them when they have me log into my skype account?

Ok, I understand.
Open your BBM app.
Swipe down from the top edge to Settings.
Scroll down towards the bottom and tap on Blocked Contacts and Updates.
Tap the Updates tab at the top.
On the contact whose updates you have hidden, tap and hold on that contact, and tap the trash can icon (to remove the hidden status, this will not delete the contact)
This will remove the contact from the Hide Status updates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BLACKBERRY BBM STATUS UPDATE ISSUE

Hi, so I do have over 100 contacts and my status does not get updated. This is a huge issue for me. I do have the latest bbm. Anyone have the answer for me? Thank you.

No solution... the BBM status updates servers can be slow.
Be patient. They will update over time.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Dead Fusion drive, brand new Late 2013 iMac. No status update from Apple.

Can someone let me know who I shouyld contact with regards to my below issue? I've spent hours upon hours trying to get my new iMac back from Apple store here in New York city, no success.
Purchased a new Late 2013 model 21" build-to-order iMac 3 months ago >
Hard drive partition corrupt within first month which required in store HD partition correction flash via genius bar >
HD hardware failed next month >
Genius appointment Feb 6 2014, was told new fusion drive was required and would take "2-3 days" >
7 days later I went in-store for status and was told they had no info and would call me with an update >
3 more days I go in store again after no call, still no status update >
Forced to purchase a new cheaper PC so I could keep working from home >
Now its 13-14 days later, I just spent over 2 more hours with Apple Support and still no results, now waiting for store Manager (“Matt”, W 14th St store in NYC) to call me. Its been 5 hours since my call this morning.
I have purchased a new computer as I work from home and cannot be without a computer fofr my job. This is ridiculous, I demanded a refund yet was told because I purchased from an authorized reseller (Tekserve - tekserve.com ) and not an actual Apple store, they cannot refund. Tekserve receipt states all support must go through Apple as it’s a build-to-order system. I paid over $1800 for this iMac (2.7GHZ quad core, 16gb RAM, Fusion drive etc..) a few months ago and it’s been the worst experience I’ve ever had with Apple in 7 years. Pi55ed off. Give me a new exact model iMac today OR give me a refund.
Apple employee, Look up the below repair ID, it'll have my cell phone number attached. Call me anytime with a solution. I've spent hours and hours on calls with Apple support with no results, no return calls from store manager.
Serial: D25LG******* / Repair ID R114745188

brettnyc wrote:
Thats my only option, I shall visit the store this evening and demand to see the manager.
Buying from an Authorized Apple reseller should never mean I get any less support than buying direct from Apple.
You're totally correct on both counts, when you ask to speak to the manager, even though you may be tempted to be angry the best approach to handling the situation is by being; calm, organzied and persistent. Bring all receipts, include names, times, places of who you spoke to and state your case.
I'm sure your issue will be addressed. In addition if you are in the US you can always call Apple's customer relations phone number, I believe the current number is 800-767-2775.
Good luck.
<Edited by Host>

Status update for MeeGo on the N900

Here's a copy of the text sent by Harri Hakulinen from Nokia. He is the project lead for MeeGo on the N900. This message was sent to the MeeGo developer mailing list just now:
Hello MeeGos !
This is brief status update of "MeeGo to N900" project. This project is currently running as Nokia project, and I am Nokia project lead for it. The current closed mode of development is not the target for us at all, but rather transitional condition. As already discussed by Valtteri in TSG meeting, we are looking into going more open mode shortly. One reason why we have done this on this way is that at the same time we have been trying to handle opening of many currenly closed components that are needed in MeeGo and to build feasible MeeGo images for N900.
However, a lot of related work is already done completely open, you can find more info from places like ofono.org, connman.net and meego.gitorious.org . So if you are eager to contribute or want to closely follow whats happening, please work on those.
As you know, we have delivered working MeeGo images for N900 as part of first code drop in the end of March. At that state we were using older kernel version on N900 than on Atom side, as we used the same kernel (.28) than what is used in Maemo 5 based products today. We ended up doing that simply because lack of time to contribute and port all the drivers to the newer kernels.
Now, for the upcoming May release of MeeGo, we are going to use the same kernel version (.33) than Atom based devices are using. For that we need to submit number of ARM-architecture patches to MeeGo as well, because many of the required ones have just been contibuted upstream kernel and were not available in .33 version originally.
We have already enabled most of the main drivers, like LCD, GFX, Wlan and BT. Still, there is a lot to do in order to enable .33 on N900, like audio drivers, and modem subsystem including SSI buss driver, modem data and audio drivers etc. Our adaptation guys are in fact contributing those modem subsystem related drivers as we speak, and if you are following kernel mailing lists you can see how that goes on.
Besides of enabling the new kernel, we are working with number of smaller and bigger issues for N900. Starting from the beginning, we are now based on ARMv7 combiled code, so the code should be better optimised for N900 now. ARMv5 compilation that was in use for code drop will still be there, and it also seems to be used at least by community project that is planning to release MeeGo for good old N810 tablets
Also, we are planning to enable dual booting of Maemo 5 and MeeGo for the upcoming release. So that will be offered as 3rd way to setup MeeGo to N900, including the existing "native" MeeGo only on N900 and chroot based MeeGo on Maemo 5 setups. Taking the dual boot mode into use likely includes upgrade to Maemo5 kernel as well, but that should not be big issue in the process of enabling that.
As I don't want to go ahead of others working on MeeGo architecture and other issues I will stop now, but I will report again when we have more to tell about the subject.
Br,
// Harri

Here's another update..
It seems that MeeGo on the N900 is not directly being driven by Nokia! It's an open project.. so the net result is MeeGo on the N900 may look and feel very different to Meego on the N900's sucessor
Either way, I'm certainly greatful for their efforts!
Hello Meego's,
As indicated in my previous mail about "MeeGo for N900" status, we were planning to open up our MeeGo work around N900. Now I am happy to announce, that we are there
First, to make it absolute clear for everybody: This is about open MeeGo adaptation to N900 device.
Like any other MeeGo project, it is open source project for all applicaple purposes, and does NOT directly have links to any potential Nokia product or potential product plans. So, based on this or any other of my posts, please do NOT start or continue speculation of upcoming Nokia MeeGo releases. That is practically not helpfull, and mostly only takes our time when we need to explain our words and actions in detail to various directions.
From our part, we are trying to implement the open development model that has been discussed now so many times around MeeGo. On practical terms, we are trying to work based on proposal by Carsten Munk, see
http://wiki.meego.com/Proposal_for_Best_Practices_for_working_in_a_MeeGo_team
We have already created some resources that will be used by the team, you can learn about those and the upcoming ones from http://wiki.meego.com/ARM/N900. We have IRC channel for realtime discussion, we will use meego-dev mailing list for normal discussions and announcements, and we will have Gitorius project for code.
We will evolve our practicies during the work, so if you are interested, stay tuned to those channels. I belive that soon we are also able to figure out, what is best way for community members to help us in development, and then effectively be part of the team.
I would also like to use this as opportunity to introduce the team behind this work (so far) and also thank them about their hard work and long hours. We have team that consist of some Nokia subcontractors and also growing team of Nokia personel:
"MeeGo for N900" team (so far)
- Cybercom Turku team; Marko Saukko, Jouni Peltonen, Sami Sirkiä, Jari Smura and Luka Milovanov.
- Cybercom Tampere team; Kalle Lampila,Teemu Tuominen,Tuukka Mäkinen and Ville Marjusaari.
- Carsten Munk via Nomovok
- Jarkko Nikula via Atomide
- Jan-Simon Möller from Linuxfoundation
- Nokia team; Alexander Kanevskiy, Felipe Contreras, Markus Lehtonen, Ameya Palande, Sakari Poussa, Roger Quadros and me.
In addition to official project team, many Nokia people have helped us despite their hectic daily work, even with their free time. Most of them are driven by the desire to open, repurpose and upstream all relevant sw that has been originally created for Maemo 5 based N900 product during previous years.
Marko, Jouni, Sami & Luka and Markus were working with me already on last year when we did prototypes and interoperability tests of Maemo & Moblin stuff combined in different ways. Based on those we had pretty good picture of what we are doing and why.
And of course, we have had very good and productive co-operation with various Intel teams since those times. Anas Nashif and many others from Intel's MeeGo team have done a lot for us by enabling ARM stuff in MeeGo OBS and repositories.
Last but not least, I want to give special thanks to Stskeeps (alias Carsten Munk . He has teached us how to operate on open, and he has also done respectable amount of this work since early days of Meego. In addition to that, I belive that his earlier work on Maemo community and on Mer project has in fact inspired all of us and shown a way to MeeGo alredy years ago.
Br,
//Harri

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
      CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      READ TABLE it_error WITH KEY message_type = c_e.
      IF sy-subrc <> 0.
Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
   endif.
endif.
if Status_change = 'X'.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
      CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
      READ TABLE t_result WITH KEY message_type = c_e.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
                  et_return = t_ret.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
     ENDIF.
endif.
    WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

Delivery status update in sales document at PGI

Normally system updates the delivery status of sales document line level, when a delivery document is created with respect to that sales document line.
But I want system to update the delivery status (in sales doc. line) when PGI is done for respective delivery document; not at the creation of delivery document. Below I have shown the status updating scenarios that I expect.
Scenario 1
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: Not done
Status in Sales document line should be A (Open)
Scenario 2
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: 50 PCs
Status in Sales document line should be B (Partially delivered)
Scenario 3
Sales doc line qty: 100 PCs
Delivery Doc qty: 100 PCs
PGI: 100 PCs
Status in Sales document line should be C (Fully delivered)
Can anyone propose a possible way of doing this (configuration/ user exits/ BADI etc,)?
Thanks,
Ramindu

Hi,
I dont know it with the use of ABAP development, but by functional logic, can suggest you to configure the rush order sales configuration for your particular sales order.
just check that availability of that particualar sales order is met or not prior to it.
and then automatically when your delivery doc is created, PGI would be done and the status of your sales order would be updated with it.
try it out on your development client, if it works out.
regards,
Siddharth.

How can i update my contacts on the ipad and have it go to my iphone. I tried backing up on icloud but this doesn't work. yes i had them plugged in when i backed it up

I want to update my contacts on my IPad and transfer it to my IPhone4. I tried backing up to ICloud (plugged in) but it didn't work.
Anyone have any suggestions?

Matthew Smith wrote:
... The only way I can think of doing it otherwise is possibly by syncing via iTunes via another Mac OS X user account where the address book is empty and then deleting them there and resyncing. ...
Brilliant! That worked like a charm.
I created a new User Account on one of my Macs and logged into it. I connected my iPhone to its iTunes and checked my iPhone's Sync Contacts option in iTunes. Since that account's address book was basically empty (two dummy contacts, one for Apple and one for this new user), I ended up with only those two Contacts on the phone. Then, going back to my real User account (which does not have syncing turned on in iTunes) the phone synced nicely with the MobileMe account and populated the phone with all the MobileMe contacts and groups.

HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH....

Status Update of Service Order From Billing Document

Dear Experts,
I am told to change the User status of Service Order once the Billing Document is Generated.
Here we are in CRM 2007 and i have done the status update of previous document but here
Billing document is not possible to read through CRM_ORDER_READ (function module).
Do any one have any idea how do i proceed.
Thanks,
SA

hi sa
to change the service order user status , when biling document is generated
make an implementation of bill_acc_if bai and in the method ENRICH_ACC_DOCUMENT
read order data using crm_order_read and change the status using
CRM_STATUS_CHANGE_EXTERN
thnks
sam

How can you update your contacts VCF file???

I have been trying for days to update me VCF file to eliminate all of the extras that I don't want to see in my skype contacts.
I have created a new VCF file and just cannot figure out how to make it happen. I have tried to uninstall on my computer, delete the %appdata%\skype file, and then go through the Contacts>Advanced>Restore contacts from file but in the end, it just gives me the same list that I am trying to get rid of. What am I missing? What's the magic?
If I could actually just delete those outlook contacts that would be great too but YOU CANNOT! I have tried blocking and delete contacts but that just puts them to the end of the list. For crying out loud, I cannot be the only one that wants to update their contact list...

Anyone?

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

No FB status updates in contacts

Similar Messages

Maybe you are looking for