No FI values in sls order doc
Dear gurus,
While saving the sales doc nou2019 the system is showing the document as incomplete as the fields u201CWBS elementu201D and u201Cprofitable seg nou201D in header data, account assignment tab have no values, were the FI settings needed to be maintained. kindly help to resolve this issue.
Thanks and regards
KV
Dear,
You need to fill the Cost object in the sales order Line Item level or Header level
Go to sale order (VA02)
Double click on the line item and select the account assignment tab there you need to maintain WBS/ Profit Center.
Regards,
Kishore
Similar Messages
-
Is it possible to spread the commitment on a value limited blanket order?
Hi - I want to create a value limited blanket order, e.g. over the next 12 months I expect to spend about £12,000 with a service provider.
I will be billed at monthly intervals and the amount will vary from month to month but it will never be more than 2k in any one month (so it could be say £150 in moth one and £1,500 in month two ).
At the moment when I look at my planning reports then full £12k commitment appears in the period that is associated with the default delivery date on the PO.
There are no deliveries as such and GR is not required for this process - I just want to be able to book the invoice as and when it comes in but check the monthly value does not exceed the 2k limit and that overall the annual limit of £12 is not exceeded.
So is it possible for me to spread the commitment so that it appears as 12 equal instalments on 1k for each period of the PO validity period?
Ideally I don't want to have to revisit the PO and massage it with each incoming invoice.
Any thoughts much appreciated.
Regards.Scroll down and you will see how you modify the form action to go to a page.
http://forums.adobe.com/docs/DOC-2363 -
IN which table stores the Value of sales orders Net Value
IN which table stores the Value of sales orders Net Value
Hi Lakshmi,
Check Following Tables:
CRMD_PRICING_I
CRMM_PR_SALESA
CNCCRMPRSAP00090
Reward Points if Helpful.
Srini. -
How do I change the value of the Order By field in an MP3 file?
good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardohello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request -
Line item pricing based on total value of the order
Hi,
We need to charge as a separate line item (material) 'Insurance' as a % based on the total value of the order less one line item. Our orders are created on the web and posted via a BAPI.
(a) depending on where the customer is located, we charge a certain added shipping cost.
(b) the customer has the choice to ask for insurance or not.
The actual order may be 10 lines totaling $1,000 and due to location, the BAPI slaps on an added line item of $100. If the customer chose the insurance option, the BAPI needs to slap on another line item whose value would be, say 2% of the total order, i.e. 2% of 1000 (instead of on 1000+100). Of course, if the customer doesn't choose this option he is not charges this extra line and further if the customer is not in the particular region, the 100 charge may also not be there.
The 2% can vary time to time so needs to be driven by a condition record based on %.
How can we achieve this in the pricing procedure? The logic of how the BAPI will function is clear to us, we are stuck on the pricing procedure configuration.
Glad to answer any further questions you may need for clarifications.
Many thanks!Ideally insurance would be levied on end customer based on Inco Terms like CIF, DDU etc.,
So you can have an access sequence for which you can make use of tables like 033 & 034 in V/07. In VK11, for this combination, maintain the required insurance percent.
In condition type V/06, for this condition type, maintain "C" for Manual entries, since you have indicated that customer has the choice. Otherwise, this can be populated automatically in sale order.
Similarly, for shipment cost also, you can have the Inco2 as one of the combination so that based on region, this condition type will be populated in sale order. If you have shipment cost configured, then this can be achieved.
In your pricing procedure, you have to assign the shipment cost condition type next to insurance and assign the From-To step accordingly.
thanks
G. Lakshmipathi -
Pricing amount and condition value in sales order
Hi all,
I have noticed for a sales order we are not able to see condition type amount, condition value in sales order even though it shows net price finaly ofr a sales order. Not even able to select the condition lines.
To be specific not able to find value in field KBETR - amount column and KWERT - condition value column
When we go to sales order line item and select condition tab, do see value displayed in Amount and Condition column. Is there are specific reason it is doing visa vis in our production we see both values.
Advise what could be the reason value not getting displayed in Amount and Condition value column.
thanksIt is due to auth for specific columns we have solved the problem.
-
Net Value in Sales order item and header URGENT
Hi experts
In some sales orders the net value is not shown but it is available in PR00 condition.
Where should i check pricing proceedure or copy control,
In the same sales order type i.e ZRP other sales orders are having net value,
this sales order is created with reference to sales order type RE.
Pls guide where to check and what correction needs to be done.
Thank u in advance.
regards
SMHi,
Pricing procedure in tcode V/08, check the field 'SubTo'.
Copy control in tcodes VTFA (between SO and invoices).Check the field 'pricing type' for conditions.
I hope this help you,
Regards,
Eduardo -
Hi All,
Any one know how the system set net value in sales order item? (VBAP-NETWR)
I mean, what kind of condition type will be considered in net value calculation.
Thank youHi,
In Sales Order net value (NETWR) is always value before tax, it means the condition type determined before tax condition will be considered in sales order Net Value.
In other words if conditon type have a category defined as D-Tax and Cond. class as D- Taxes, the value of this condition type will not be considered in Net value.
regards
Vivek.
Edited by: Vievk Vardhan on Jan 7, 2010 2:00 PM -
Change of service value in pm order
Hi Gurus,
from PM oder service PR has been created and value has been maintained as 'X'. The PR got converted in to PO and manually the value of the PO has been changed from 'X' to 'Y' and processed. Now is it possible to change the value in PM order from 'X' to 'Y'.
Thanks in advance.
regards
SatishSatish,
There is a standard work flow task (TS20000650) available for this. A work flow will be sent to the Purchaser responsible indicating a difference in value.You could develop a custom process to automatically update the value in the PM component tab as well.
Regards
Narasimhan -
How to sort the arry value in ascending order
I have a string array where i need to sort the below values in ascending order in the same format...can anyone give me clue on this?
9.3
3.1
9.1
19.1
19
9.4
9.1.1
the sorted order should be
3.1
9.1
9.1.1
9.3
9.4
19
19.1You may have easier luck writing your own comparator for this. These are headings in a table of contents, right?
Write a comparator that tokenizes a string on the '.' character, or use a StringBuffer to remove them, and then order the elements according to the combined numbers. Since alphanumeric would order this list as you want it anyway you could just order that way once the '.' are removed.
In other words your comparator would do this in the "compare" method:
public class MyComparator implements Comparator, java.io.Serializable {
private static Comparator stringComparator = java.text.Collator.getInstance();
...constructor(s), your own private "instance" variable of type MyComparator, a getInstance() method of your own, yadda yadda...
public int compare(Object item1, Object item2) {
try {
value1 = removePeriods((String)item1);
value2 = removePeriods((String)item2);
if (value1 == null) {
return (value2 == null) ? 0 : (-1);
return compare(value1, value2);
} catch (ClassCastException cce) {
System.err.println("Wrong Object Type, JackAss!");
protected int compare(String str1, String str2) {
return MyComparator.stringComparator.compare(str1, str2);
private String removePeriods(String value) {
StringBuffer sb = new StringBuffer(value);
int decimalIndex = value.indexOf('.');
while (decimalIndex != -1) {
sb.delete(decimalIndex, (decimalIndex + 1));
} -
Rounding value for purchase order quantity
Hi Guru ,
i need help for logic LOT SIZE MRP.
In particolar i need of use the parameters of rounding for create the planned order multiple of the value.
Example for a requirement of 3800 pz whit a value rounding of 500 i vould want that the system create a planned order of the 4000pz.
I have tried insert this value 500 in the field "Rounding value for purchase order quantity" in the view MRP1 but after run MRP the system create a planned order of the same quantity of the requirement.
Thanks a lot for help
Daniele
PP TEAMDear,
OMI4, for lot size select Lot for lot order qty with rounding.
Either you can use the Rounding Value or you can use a Rounding profile in MRP2 view to round of your order qty and rouding value in MRP1 view.
Further you can check
Check FM MD_ROUNDING_VALUE
Regards,
R.Brahmankar -
Sales order doc and item fields in customer line item report(FBL5N)
Hi All,
We have some billing documents and the accounting docs are created as well. However, in the FBL5N report, we are not able to display the sales order doc and item info even though the columns are avaliable in the layout.
Anyone can help?
Thanks,
TeoHiya,
You said you had the Order/Sales Doc field on the layout already.
Have you ever been able to view the Order? All I can view is the Billing Doc, and I would think that is logical, since the Order is not the immediately prceeding document for the Accounting Doc. The Accounting Doc is created off the Billing Doc and that is what is updated in BSEG. The Sales Order is not updated in BSEG (I haven't seen that happen).
In the event of a GR into stock posting, the Product Cost Collector or PO is the immediately preceeding document and hence updated in BSEG.
Cheers. -
Gross order value in sales order currency.
hi to every one,
am fresher in ABAP programming, can u plz help me by saying the Gross Order Value in Sales Order Currency
as the Gross Order Value in Purchase Order Currency is BBWERT .
REGARDS.
SAI KRISHNAHi Sai,
You can use that data element BBWERT as type in your program to get the value, however the best practice is to identyfied the fields and tables in each module in order to use as reference for the program variable.
Regards
Alexis Ramirez -
Value contracts Maintenance Orders (service Orders) for particularly period
Hi Experts,
My client wants Value contracts Maintenance Orders (service Orders) for particularly periods. How can I maintain this scenario in sap MM.
Thanks in advance,
ChandhuThanks for your replay,
I have tried already standard value contract.
I have mentioned 1000 service number in value contract. But I am not getting service number at the time of Purchase Order creation with Value contract reference number.
Thanks
Chandhu -
Hi,
How system pick the credit value in sales order.What are the different setting required for this?
Regards
PrabudhHi prabudh,
Creidt value is picked up from the sales order through the Pricing procedure.... While defining the pricing procedure we maintain the sub total "A" against the Total value. This value will get updated as the creidt value......
Regards
Harsh
Maybe you are looking for
-
Hashmap and array list problems
This is an assignment I have to do and I do NOT expect anyone to do the coding for me. I am just looking for some direction as I have no clue where to go from here. Any guidance would be very welcomed. We were given code that used just an Array lisTh
-
HT4902 I don't want my contacts to move to iCloud. Is that possible?
I'm changing my organizations mobil me account to iCloud. Mostly we want the photos we've posted to mobile me. But I'm using my computer to make the move and I'm concerned iCloud will upload my contactacts from my computer. How do I prevent that? fra
-
How to read a xml node name in xsl? Urgent!
Hi, I've a dynamic xml which gets generated at runtime. The basic nodes remain same but the content and nodes vary. - <root> - <list> - <row> <courseStartDate></courseStartDate> <courseEndDate></courseEndDate> <courseName>ORACLE</courseName> </row> -
-
What can I change to gain access to my work vpn. I can access with my MacBook Air and other routers. Can use my ipad and this time capsule to successfully access the VPN.
-
HT1329 iPod classic disc use - only some music visible in Windows Explorer!?
I followed above steps but then realized that it has only copied some of my music over. When I look at the music folder on the ipod in Windows Explorer, I only see some of the artists/albums/songs that actually on the iPod! I can see that a certain s