No field values in BW after pulling from R/3

Hello,
Schedule was successful and all the data records were uploaded into BW.
But the filed values of one field which happens to a time field is showing only zeroes in all the filed values.
That particular time field in R/3 has of course distinct values for each record.
The field name,domain name and data element name are same .
It has following properties!
1) Data Element   : Data type: NUMC, length 4, decimal places 0.
2) Domain           : Data type :NUMC, length 4, decimal places 0, out put length 5,
                              conversion routine : Atime
Can i get any inputs for this?
Many thanks in advance,
Ravi

Hi Diego,
I just wonder whether the sequence of fields in Extract structure and result set in RSA3 extract checker are one and the same.
i am finding it difficult to verify those as it has too many records and even field names and their sequence are different.
And that particular info object is not available in BW . so i had created it as a time key figure.
Any suggestions?
Ravi

Similar Messages

Manger field values is overwriting after incremental crawl in SP2013?

Step 1: we ran full crawl successfully. Step 2: we updated manually manager values for 10 users. Step 3: removed mapping for manager in Manage User Properties. Step 4: Again we ran the incremental crawl.
After incremental crawl completed,manager field value is showing empty for 10 users in the SharePoint User Profile.
we removed mapping for Manager even though why it was showing empty value once incremental crawl is completed.
Can any one give response on this ASAP.
Thanks in advance.

Hi,
I have done a test in my SharePoint 2013, I can't reproduce your issue.
When I updated manually manager values for users, it was showing the updated value once incremental crawl is completed.
Let’s verify the following:
Whether you start full crawl or Start full Profile Synchronization.
Whether you start incremental crawl or Start incremental Profile Synchronization.
When you updated manually manager values for 10 users, whether you change the manager user rather than emptied it.
Make sure that you actually removed the mapping. I suspect that the mapping is still there.
Besides, take a look at the following links:
http://www.go4sharepoint.com/Forum/ad-user-profile-import-problem-ad-4662.aspx
http://community.office365.com/en-us/f/154/t/23442.aspx
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Overridden fields' values not retained after form is saved/reopened

Hi Everyone,
Thanks in advance for any help you can provide. I've searched the net, but can't seem to resolve my problem.
The form itself is somewhat complex. If needed, I can get into the details of how the calculation is done, but may save some time if I just explain the problem:
I have 3 drop down boxes on my form that are auto-populated based on what is entered in a series of other dropdown boxes. The user is allowed to change the calculated drop downs to another option if they want.
When the form is saved and reopened, 2 of the 3 drop downs are not retaining the value the user selected if they overrode it. Instead, it's recalculating against the calculation script that's written. Strange thing is that there is 1 of the three drop down retaining it's value perfectly.
Is there anyway I can save the overridden values, or stop it from recalculating and reverting when the form is saved then reopened? I can't set the fields to disabled/read-only either, in case the user needs to override and save again to something else later.
Thanks for any help you can provide!!

Can you email me the document to [email protected] ?

Can I create a Master PDF that pulls field values from multiple PDFs?

I am designing a tracking system for a class and want to have the student fill out a basic information form that tracks personal information and individual test grades. As an administrator, I want to have a master list that can track the entire class and pull in their grades, calculate class average, and order them accordingly. Ideally, it would pull from a folder of these student PDFs.
Does Adobe have a way to do this? I have LiveCycle and Acrobat Pro.

Thanks for the very prompt answer! That seems like it sort of does what I want - however, once I leave the course, I want to have the system continue to work - and future Admins probably wont have access to Acrobat Pro, or the technical knowledge to send out looking for responses. Nor is there a sharepoint (or equivalent drive) to set. Perhaps some further explanation is required.
There are multiple classes going on at one time, and each class gets a folder on a standalone machine, with a different Admin in charge of each class. When one graduates, another one fills in behind them a week or so afterwards. So what I need is a "template" file for student data, and a template "Master list" that pulls from all of the student data PDFs in that folder, locally, without the Master list having to send out requests for information. That way, when a new class starts, the students can email in their student data, the Admin can pop them all in a folder with a blank Master List template, and when the admin opens the Master list, it populates with all the data from the student sheets.
Hopefully that is a little clearer, and hopefully doable! It really needs to be pretty darn simple. We used to do it in Excel, and gave each student a tab where we copy/pasted their basic data - and a crosslinked sheet pulled it into the master list. Alas, that looked unprofessional and sometimes was very troublesome when the students altered the Excel form in any way or put things in the wrong cells.
Thanks!

Assign a value from dropdownlist to input field value on BSP page

Hi,
I'm new to SAP and ABAP. We have a CRM project in which I have to maintain BSP pages.
Now, coming to my problem: I have a input field with
value = "//BTAdminH/HeaderInfo"
This field is normally maintainable. The required function is now to set this field as not maintainable/readonly. Then, the value should be set automatically to an value, which will be selected from a dropdownListBox. After saving, the value HeaderInfo should have the same value like the selected value from the dropdownListBox.
How can I now set the field as readonly (this should be the easier part) and
how can I set the value for the HeaderInfo to the value of the selected value from the dropdownListBox?
If I set it directly like this
value = "//BTActivity/Priority"
it is shown on the BSP page correclty, but it is not saved as HeaderInfo.
Please help me.
Enja

Hello Gokul,
test was only for test purposes! I am using as a separator the plus sign!
But this is not the problem!
In debugging, the local variable has the concatenated value! So, this is working!
oncatenate ls_ddlb1-value ls_ddlb2-value ls_ddlb3-value into lv_headerinfo SEPARATED BY ' + '.
But when I assign the value of my set_headerinfo to the local variable, then it is returning only the separator sign!!!
if BTAdminH->GET_HEADERINFO( 'HEADERINFO' ) is initial.
BTAdminH->SET_HEADERINFO( attribute_path = 'HEADERINFO' value = lv_headerinfo ).
endif.
If I declare the local variable as one of the dropdown values, then it is getting populated also for set_headerinfo
lv_headerinfo =ls_ddlb1-value.
So, the assigning is also working! But it is not working, when the local variable equals more than one value! I hope that I could explained it in the right way for you!!!!
So. why is the value for set_headerinfo not the same as the one for the local variable! The local variable has the correct value after the concatination.
Regards
Enja

No Data in Field Scrap quantity (AMGLG) after Append DataSource 2LIS_04_P_COMP (Component View from PP/PP-PI)

Hi experts,
we enhanced the BI Content standard DataSource 2LIS_04_P_COMP "Component View from PP/PP-PI" with the field AMGLG (Scrap quantity) per maintenance of the relevant extract structure MC04P_0COM via LBWE:
The enhancement of the extract structure worked fine.
Unfortunately the enhanced field is not filled after the Statistical Setup of the LIS Application 04 "Production" (t/code OLI4BW).
RSA3 -> 2LIS_04_P_COMP:
Any ideas or experiences?
Many thanks in advance and regards,
Michael

Attached one example:
BW DataSource 2LIS_04_P_COMP:
ERP Summarized BOM Multilevel (t/code CS13) Component 456:
ERP Summarized BOM Multilevel (t/code CS13) Component 301:
Any ideas why there are no values for the field AMGLG extracted?
Thanks and regards,
Michael

Passing field values to form from another form

Hi,
I have multiple detail table for a master table. The master table is project table and the details tables are all related to the project table. In the portal forms we cannot have a form based on multiple child tables. So I am trying to enter one detail table at a time. I have created a master-detail table based on project table and a detail table (cost table). After I enter data in this MD form I want to carry the projectid to another form based on another detail table (resource table) on the next page. I want to navigate to this next form by clicking on a next button after I have entered data on the previous MD form.
The projectid is a hidden field in the first MD form and is generated by a database sequence. I understood that there is many ways to send field values to a form:-
1. By creating a moduleid link on the next button. This link will have the projectid value
2. By calling the form from a PL/SQL procedure on the CALL/GO of the first MD form.
I am not sure how to get the 'projectid' value generated from the sequence and pass it to the link or a procedure. Will the projectid value be stored in the session ? How do I get it ?
Is the above way of entering multiple detail tables feasable ? Please advice.

Hi,
I have multiple detail table for a master table. The master table is project table and the details tables are all related to the project table. In the portal forms we cannot have a form based on multiple child tables. So I am trying to enter one detail table at a time. I have created a master-detail table based on project table and a detail table (cost table). After I enter data in this MD form I want to carry the projectid to another form based on another detail table (resource table) on the next page. I want to navigate to this next form by clicking on a next button after I have entered data on the previous MD form.
The projectid is a hidden field in the first MD form and is generated by a database sequence. I understood that there is many ways to send field values to a form:-
1. By creating a moduleid link on the next button. This link will have the projectid value
2. By calling the form from a PL/SQL procedure on the CALL/GO of the first MD form.
I am not sure how to get the 'projectid' value generated from the sequence and pass it to the link or a procedure. Will the projectid value be stored in the session ? How do I get it ?
Is the above way of entering multiple detail tables feasable ? Please advice.

Dialog progg....(matching Field values from Table)

Dear All,
                 I have one screen 0100.
At any stage, a field value entered in the screen field by user, should be matched from say EKBE table value with tolerance of 10-15%.
If it doesn't matches, Error message should display in a dialog box.
Any suggestions, pls.
Thanks in Advance

Hi,
In PAI we can do this validation.
example :
In screen flow logic add CHAIN ..... ENDCHAIN and a module to validate the field
PROCESS AFTER INPUT.
CHAIN.
    FIELD g_banfn.
    FIELD g_bnfpo MODULE validate_g_banfpo.
ENDCHAIN.
And in Module validate according to your codition.
MODULE validate_g_banfpo INPUT.
* Validation.
Select ....
from ekbe
where some field = entered field on screen (e.g p_number)
IF sy-subrc <> 0.
* if entered value is not present in table give an error message.
    MESSAGE e133.
ENDIF.
ENDMODULE.                 " VALIDATE_G_BANFPO INPUT
thanks.
Edited by: Dhanashri Pawar on Dec 2, 2008 12:48 PM

Setting field value from antother field

I am having problems setting the value of a field depending on the entry of a previous drop down field.
I am creating some wizard pages. On one page i wish a drop down list to populate another field. The drop downlist is unbound. (I have tried doing this with bound field aswell). To do this I have the Depends on Item of the target field to depend on the dropdown list field, so that the appropriate values are updated. (i have tried with the target field being bound and unbound aswell not that it should matter).
I have then updated the VO (view object) adding transient fields when the fields are unbound. Then i updated the view row class. The setter of the drop down field was used to set the value of the target field. (Using the setter of target field). I added system.out.println and the fields are called and set accordingly. ie getters and setters are correct.
However when i run the screens the target field value is not set with the value within the getter of target field.
Could you advice if this is a bug or whether i should be coding this in a different manner. (if it is a bug and you tell me when it is likely to be fixed and any alternative work arounds).
Cheers
Alan

Alan,
Not really a bug, but "missing functionality". The problem is that ADF Faces will only refresh a UI Component value from the underlying model binding value when you submit the request with immediate="false", OR when you explicitly call resetValue() on the component.
We have added a new boolean item-level property "Clear/Refresh Item When Depends-On-Item Changes" in the latest build.That property will do the trick for you: it will clear the value and call resetValue on the UI Components of the dependent items, BEFORE the depends-on-item model value is updated. So, in your case, the setter method of your depends-on-item attribute will update your dependent item after JHS cleared the item, and you will see the new value right away because UIComponent.resetValue() was called as well.
Steven Davelaar,
JHeadstart Team.

Standardizing "From" Field Value of an SAP Generated Email

Hi Experts,
I understand that standard behavior dictates that the "From" field of an email SMTP emails generated by SAP is populated with value stored in the "Email Address" field of the triggering users' SAP account (tcode SU01). In the case where this email address field is empty, the system concatenates the triggering user's ID with the value stored in "Default Domain" (tcode SCOT).
However, I would like to know if there is a SAP configuration that allows me to specify a standard system email address in the "From" field for ALL SMTP emails originating from the system and NOT to use the triggering users' email address as described in the previous paragraph.
Any help on this query is very much appreciated. Thanks.
Regards,
Lionel

Hi Macy Lo,
Check the <b>Data types</b> of BDCMSGCOLL-MSGID &
BDCMSGCOLL-MSGNR.
It fails because the datatypes doesn't matches.
You can check this with <i>sy-subrc</i> statement after the read statement.
Hope it helps.
Regards,
Maheswaran.B

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

How to fetch the Business area field value from MIRo into report

Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
Lakki

Dear,
For Bussiness area
RKPF-GSBER

To find a field value from a table

i want to get some field value from a data dictionary table.
for eg Tragr from Mara. in Fields list it shows the field is in Mara table. but in content screen it does not showing the field at all. Actually of 220 fields of mara table only 99 fields are shown. how to view all the fields of a particular field. is there any setting is there.

Hi Deva,
When we execute any table by default SAP will display only few columns.(90 i guess) If we want to view all the columns of the table then do like this after executing the table i.e in ur table output.
Menupath->Settings->User parameters->choose radiobotton
Grid display Here u can see all the fields.
If u don't want to see all the fields then do like this.
Settings->listformat->Choosefields->Deselectall->Select what
ever fields u want using the search button in bottom and press enter. It will display only selected fields.
Some times we will come up with strange situations.
EG: In the field list some field will be there. But if u select that field from that table in select query it will give u syntax error saying field xxx does't exist in table yyy. This field is nothing but text table field. If u want to select this field then u have to select it from the text table. U can find the text table exist for some table or not in
Menupath->goto->text table. (In this case makt is text table for mara)
Just check below code for ur reference.
DATA: wa_mara TYPE mara.
SELECT SINGLE * INTO wa_mara FROM MARA .
Here if u go to mara table u have field MAKTX But above select will not return the field maktx even we are refering wa_mara to data base table mara. We have to explicitly select it from MAKT.
Hope this clarified all ur doubts.
Thanks,
Vinod.

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

No field values in BW after pulling from R/3

Similar Messages

Maybe you are looking for