No fields after transport
Hi experts,
we created new fields with the eewb for campaignmanagement.
In the develop system everything works fine but after the transport to the
test system we can't see the new fields.
Does someone have an idea what the problem could be?
Thanks
Alex
Hi Alexander,
I also faced somewhat similar problem when our code base got transported to the Quality System from the Development System. It was related to some methods and classes.
You can have look at the Transport Request using SE01 both in the Source System and Target System. In the Target System check for the Request. If the generation had failed there you need to again regenerate the objects. Check for all the dependency of the objects.
If you see that the problem is still persisting, then you need to get in the touch with the BASIS Consultant responsible for maintainence of the system landscape.
Hope this helps.
Thanks,
Samantak.
Similar Messages
-
Issue with migrated transformation rule after transport
Hello all,
We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
Has anybody faced such issue? We are on Ehp1 SP7.
- DannyThanks Murali,
Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
- Danny -
ALV Title Not Display after transporting the Programme from DeV to Qlty
Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout =gs_layout*
CHANGING
it_outtab = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM -
Alert rules not displaying correctly in the RWB after transporting to QA
Hi Experts,
After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
Thanks and regards
BrendonHaving the same problem and looking for fix...
-
Product hierarchy ID lost after transport
Hi experts,
could you please help me with the following problem: we have made customizing of the mapping of imported catogeries to the categories in the EBP for a schema.
The mapping is as follows: Imported category, Product hierarchy, Product category, The customizing was transported successfully but the product hierarchy ID field is empty in the target system although the hierarchy ID exists in the target system.
Any ideas what can be the problem?
Thanks for your help.
TomasJust as Info,
I needed to go for deletion of those characteristics - quite some work, like:
1. delete all where-used entries for the characteristics in ALL CLIENTS of this system (important: e.g. planning layout - recommended to change and not simply delete, because the change can be transported)
2. when then trying to delete characteristics (with "unlock" in KEA0 > value fields) - tons of tables and strucutres popped up, where this data element is still needed - follow note 353257
3. generate best practice operating concern new (10UK in our case)
4. create PAPH1 etc. new from table MARA (not mvke in our case - depends)
all good - hopefully no issues after transport - we will see. -
CRM Datasource Problem After Transport
Hi,
I am using CRM datasource 0CRM_SRV_PROCESS_H in CRM 5.0. The datasouce is installed through RSA5 and enhanced successfully in CRM Development System. Its BWA metadata is also activated automatically(as i am on CRM 5.0). I have transported it successfully to CRM Quality system without any warnings/errors. But when i check it in T-Code BWA5, its "Active" flag is not checked. And when i check in RSA3, sytem is throwing error message " Errors Occurred During Extraction". I can see the datasouce in RSA6 in Quality system with its enhanced fields.
How can i make the "Active" flag checked in CRM Quality system? Or How can i activate BWA metadata in CRM Quality system?
Urgent response would be appreciated.
Regards,
PrasadDefinitely this is not related to replication. Some times this error 'Error in extraction" is related to SMOXHEAD table entry.
Try following steps..
Copy Smoxhead entry CRD> se16 > SMOXHEAD > DataSource > select the resulting line, copy
se16 > SMOXHEAD_S > DataSource > paste
Table Entry > Transport Entries of SMOXHEAD_S
After transport try running RSA3. It shall be fine.
Regards,
Assgn pts if helpful. -
System generated new version after transport
I have noticed that after transport, the system automatically generated a new version in the receiving system and mark that as active. Is this usual? Should I just leave it as it is?
Many thanks,
KathrynYes, this is really usual.
Workflows work version dependant, this means that your active workflows running in production do not get affected when transporting a new template.
In all of the workitem tables (sww* tables) version is always included as a key field.
That's why you have to double check if you're changing a task/method, these are version independant.
Kind regards, Rob Dielemans -
View modification in ODS after transport to production
Hi,
It's possible to see all modification in ODS after transport?
I would like to see the modification that was done in Navigation Attributes of ODS.
Thank's
Cesar G. BatistaHI
When you double click on ODS you see a info button(i) click on it it will pop up save and activate button these yo can see the last log.
Hope this helps!!
Thanks
Santosh RC -
Error after transport of Virtual Cube with Services
Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
NoorHi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G. -
Hierarchy Analysis Authorization does not work after transport
Hi Gurus,
I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
Regards,
SalmanSalman,
What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
Regards,
Shivraj Singh -
Planning layout can no longer be displayed after transport
Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMaSwitch cube Load <> Planning solves the problem...
Thanks !
RaMa -
Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.
Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV). -
How to calcluate a filed based on two other fields after TABING out.
Hi,
I need my third field be calculated based on the previous two fields after tabing out from each field.
Price Quantity Amount
12 10 120
Both price and Quantity is text box and amount is readonly.I want if I change Price from 12 to 15 and tab out then amount should automatically get changed to 150.
Regards,
PrakashI believe you can use Partial Page Rendering (PPR) to accomplish this. You'd place a 'firePartialAction' event on the input field. This event would fire when you tab out and then you can invoke controlelr logic to set the other two fields appropriately.
Check out the OA Framework Developer's Guide for examples. -
In which situation I need to active objects after transport
Hi Experts,
I'm wondering in which situation I need to active object after transport? In some cases, I have to active transformation, DTP, infoobject, multiprovider.... Does any one make a conclusion of that?
thanks in advance.
EricSometimes, because of impact of a transport some other objects will be deactivated, then we need to manuaaly activate the objects after transport.
Also, sometimes transport after import process could not be able to activate the objects, then also we have to activate them manually.
Or suppose, you have moved and infoobject, due to which some other objects become inactive (where ever infoobjects is being used), then we have to activate them manually, if you dont want to transport them. -
Web template with HTML framset not working after transport
Hi,
I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
When looking in transport connection I see the following message:
"Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
Has anybody an idea what could cause this?
Is there a way to regenerate templates (like RSRT for queries) ?
Thanks in advance
Bernd Dümmel
KODAK Stuttgart
using ve created aDid you upload the video?
Did you provide the correct path to your HTML object?
Maybe you are looking for
-
Hi there. If I use itunes over home sharing in my house on 2 pc's, does it use data from my internet, or does it work over local home network?
-
N9 after PR 1.2 update - Mail for Exchange is sync...
I have a problem with my N9 Meego after 1.2 update. I have mail for exchange account talking with exchange 2010 server and sync works just just fine with calendar and e-mail. Contacts on otherhand doens`t work. It says its bringing contact like 78 fr
-
I just bought n95 and trying sync with isync 2.4. i installed the nokia n95 plugin but it not working everytime i click on add device in isync 2.4 pop up comes up says NO DEVICE FOUND i don't know what to do. Please help me I bought n95 cause i think
-
I forgot my GameCenter Apple ID, but I remember the nickname...
I used to use a few different apple IDs (my siblings' accounts), so i can't remember which apple ID i used to make my Game Center... I do remember the nickname I used, but after the IOS 7 update, it only accepts the ID instead of the nickname. My sis
-
Difficulty getting Contacts into Numbers
I'm new at using a support community, so I apologize if I'm not doing this correctly. Anyway, I'm trying to export my contacts to a Numbers spreadsheet using the drag-and-drop method (one at a time). However, only five fields are showing up in the Nu